scholarly journals The Mechanisms of Neolithisation of Western Europe: Beyond a South/North Approach

2021 ◽  
Vol 7 (1) ◽  
pp. 718-735
Author(s):  
Caroline Hamon ◽  
Claire Manen
Keyword(s):  
Western Europe ◽  
Atlantic Coast ◽  
Integrated Approach ◽  
Complex Model ◽  
Danube River ◽  
Long Distance ◽  
Social Rules ◽  
Regular Rhythm ◽  
The Stability ◽  
Different Origins

Abstract Up until now, the neolithisation of Western Europe during the sixth millennium BCE has mainly been approached through the characterisation of its diffusion vectors (cultural vs demic diffusion) and the emergence of technoeconomic innovations (rhythms, scenarios, and transmission). Traditionally, two primary routes of agricultural diffusion are distinguished: one extending along the Danube river corridor to the Atlantic coast (Linearbandkeramik) and the other along the Mediterranean coastal zone (Impressed Ware). To move beyond this dichotomy, this article proposes a first attempt at an integrated approach to the mechanisms of neolithisation in Western Europe, one of the few territories where it is possible, and therefore necessary, to investigate the processes that are common to both of these principal neolithisation complexes. The most widely held vision, inherited from the 1980s, of a European Neolithic that developed from east to west following a regular rhythm has progressively been replaced by a more complex model of diffusion characterised by arrhythmia and cultural reconfigurations. Despite having different origins and trajectories, the expansion of the first farmers was made possible by a number of common mechanisms. Impresso-Cardial and Linearbandkeramik societies faced similar constraints, especially with regard to ensuring the stability of their social and economic models, while minimising the risks inherent to the colonisation of new territories. Three main mechanisms would have structured the first neolithisation phases of both spheres: a strong mobility of populations regulated to varying degrees by social rules, a strong solidarity expressed at multiple levels of interactions within each sphere, and, finally, the existence of syncretism and cultural recompositions including close and long-distance relations.

Going the Distance

2020 ◽  
Author(s):  
Ron Harris
Keyword(s):  
Large Scale ◽  
Western Europe ◽  
Family Firms ◽  
Global Trade ◽  
Long Distance ◽  
Business Corporation ◽  
Modern Economy ◽  
Key Factor ◽  
Silk Route ◽  
Passive Investors

Before the seventeenth century, trade across Eurasia was mostly conducted in short segments along the Silk Route and Indian Ocean. Business was organized in family firms, merchant networks, and state-owned enterprises, and dominated by Chinese, Indian, and Arabic traders. However, around 1600 the first two joint-stock corporations, the English and Dutch East India Companies, were established. This book tells the story of overland and maritime trade without Europeans, of European Cape Route trade without corporations, and of how new, large-scale, and impersonal organizations arose in Europe to control long-distance trade for more than three centuries. It shows that by 1700, the scene and methods for global trade had dramatically changed: Dutch and English merchants shepherded goods directly from China and India to northwestern Europe. To understand this transformation, the book compares the organizational forms used in four major regions: China, India, the Middle East, and Western Europe. The English and Dutch were the last to leap into Eurasian trade, and they innovated in order to compete. They raised capital from passive investors through impersonal stock markets and their joint-stock corporations deployed more capital, ships, and agents to deliver goods from their origins to consumers. The book explores the history behind a cornerstone of the modern economy, and how this organizational revolution contributed to the formation of global trade and the creation of the business corporation as a key factor in Europe's economic rise.

A Geographical Information System (GIS) study of Triassic vertebrate biochronology

2005 ◽  
Vol 142 (4) ◽  
pp. 327-354 ◽  
Author(s):  
E. J. RAYFIELD ◽  
P. M. BARRETT ◽  
R. A. McDONNELL ◽  
K. J. WILLIS
Keyword(s):  
Spatial Data ◽  
Geographical Information Systems ◽  
Western Europe ◽  
Temporal Distribution ◽  
Geographical Information ◽  
Late Triassic ◽  
Spatial And Temporal Scales ◽  
Potential Index ◽  
The Stability ◽  
Land Vertebrate

Geographical Information Systems (GIS) have been applied extensively to analyse spatial data relating to varied environmental issues, but have not so far been used to address biostratigraphical or macroevolutionary questions over extended spatial and temporal scales. Here, we use GIS techniques to test the stability, validity and utility of proposed Middle and Late Triassic ‘Land Vertebrate Faunachrons’ (LVFs), a global biostratigraphical framework based upon terrestrial/freshwater tetrapod occurrences. A database of tetrapod and megafloral localities was constructed for North America and Western Europe that also incorporated information on relevant palaeoenvironmental variables. This database was subjected to various spatial analysis techniques. Our GIS analysis found support at a global level for Eocyclotosaurus as an Anisian index taxon and probably Aetosaurus as a Norian indicator. Other tetrapod taxa are useful biostratigraphical/biochronological markers on a regional basis, such as Longosuchus and Doswellia for Late Carnian time. Other potential index fossils are hampered, however, by taxonomic instability (Mastodonsaurus, Metoposaurus, Typothorax, Paleorhinus, Pseudopalatus, Redondasaurus, Redondasuchus) and/or are not clearly restricted in temporal distribution (Paleorhinus, Angistorhinus, Stagonolepis, Metoposaurus and Rutiodon). This leads to instability in LVF diagnosis. We found only in the western Northern Hemisphere is there some evidence for an Anisian–Ladinian biochronological unit amalgamating the Perovkan and Berdyankian LVFs, and a possible late Carnian unit integrating the Otischalkian and Adamanian.Megaplants are generally not useful for biostratigraphical correlation in the Middle and Upper Triassic of the study area, but there is some evidence for a Carnian-age floral assemblage that corresponds to the combined Otischalkian and Adamanian LVFs. Environmental biases do not appear to strongly affect the spatial distribution of either the tetrapods or megaplants that have been proposed as index taxa in biostratigraphical schemes, though several examples of apparent environmental bias were detected by the analysis. Consequently, we argue that further revision and refinement of Middle and Late Triassic LVFs is needed before they can be used to support global or multi-regional biostratigraphical correlations. Caution should therefore be exercised when using the current scheme as a platform for macroevolutionary or palaeoecological hypotheses. Finally, this study demonstrates the potential of GIS as a powerful tool for tackling palaeontological questions over extended timescales.

The myth of long-distance megalith transport

Antiquity ◽  
1991 ◽  
Vol 65 (246) ◽  
pp. 64-73 ◽  
Author(s):  
R. S. Thorpe ◽  
O. Williams-Thorpe
Keyword(s):  
Western Europe ◽  
Long Distance ◽  
The North ◽  
Long Distance Transport ◽  
Early Farming ◽  
Distance Transport

The megalithic monuments of western Europe have long been a celebrated proof of the engineering achievements possible in an early farming society. With the engineering skills to raise up the stones went the capability to move them to the site, with Stonehenge the best-known example of an apparent long-distance transport, incorporating Welsh bluestones and sarsens that perhaps originate in the Avebury region to the north. Following their recent challenge to the belief that the builders of Stonehenge did carry its bluestones from west Wales, the authors look critically at the larger pattern of megalithic manoeuvring.

scholarly journals Ensuring Human Rights in Ukraine: Problematic Issues and Ways of their Solution in the Social and Legal Sphere

2020 ◽  
Vol 37 (64) ◽  
pp. 124-136
Author(s):  
Yevhen Leheza ◽  
Tatiana Filipenko ◽  
Olha Sokolenko ◽  
Valerii Darahan ◽  
Oleksii Kucherenko
Keyword(s):  
Human Rights ◽  
Integrated Approach ◽  
Unified Approach ◽  
Legal Norms ◽  
The Social ◽  
Political Forces ◽  
Protection Of Human Rights ◽  
The Stability ◽  
Development Prospects

The article discusses some complex factors influencing the process of realization of human rights in Ukraine, highlights the unified approach to the classification of legal norms that exercise human rights and freedoms, as well as problems and development prospects. Now the real protection of human rights is one of the most acute problems of the Ukrainian reality. It serves as one of the most important tasks, not only for the functioning but also for the existence of the Ukrainian state. Therefore, it should be borne in mind that guaranteeing respect for human rights in Ukraine is only possible through effective reform of the power system and compliance with an integrated approach to guarantee human rights, both by the State and by society. civil. It is concluded that guaranteeing the general enjoyment and enjoyment of human rights is a matter of co-responsibilities, which is why it is also negatively affected by the rigid opposition of the political forces, which undermines the stability of society, the stability of the constitutional order. While increasing the low level of legal culture of officials and citizens.

Market Power and Market Failure The Decline of the European Fertilizer Industry and the Expansion of Norsk Hydro

2008 ◽  
Vol 9 (1) ◽  
pp. 70-95 ◽  
Author(s):  
Einar Lie
Keyword(s):  
Western Europe ◽  
Market Failure ◽  
Cost Structure ◽  
Organizational Capabilities ◽  
Main Argument ◽  
Norsk Hydro ◽  
Fertilizer Industry ◽  
Market Shares ◽  
The Stability

During the 1980s, the fertilizer industry in Western Europe underwent some radical changes. Reduced profitability and overcapacity forced a number of smaller producers to close down, and most of the major firms in the business either withdrew from the market or reduced their capacity. The exception was the Norwegian industrial conglomerate Norsk Hydro, which expanded rapidly and established itself as the largest producer in Europe and later globally.The article discusses the strategy behind Hydro's expansion in relation to the changing structure of the fertilizer market, which historically was characterized by tacit and explicit agreements on prices and market shares between the major producers. Hydro's strategy and growth are analyzed in relation to some theoretical contributions from the study of transnationalisation of enterprises. A main argument is that Hydro's expansion was not driven by advantages in cost structure or organizational capabilities, nor did the expansion create such advantages. The Norwegian company expanded in foreignmarkets partly because it had less to lose from a counterattack than competitors in largermarkets and partly because of strategic disadvantages. Contrary to most of its large European competitors, Hydro failed to identify the long term threats to the stability and profitability of the Western European market.

scholarly journals A periodic Markov model to formalize animal migration on a network

2018 ◽  
Vol 5 (6) ◽  
pp. 180438 ◽  
Author(s):  
Andrea Kölzsch ◽  
Erik Kleyheeg ◽  
Helmut Kruckenberg ◽  
Michael Kaatz ◽  
Bernd Blasius
Keyword(s):  
Markov Model ◽  
Network Flow ◽  
Dynamic Properties ◽  
Satellite Telemetry ◽  
Population Level ◽  
Complex Model ◽  
Transition Rates ◽  
Long Distance ◽  
Directed Movement ◽  
Animal Migration

Regular, long-distance migrations of thousands of animal species have consequences for the ecosystems that they visit, modifying trophic interactions and transporting many non-pathogenic and pathogenic organisms. The spatial structure and dynamic properties of animal migrations and population flyways largely determine those trophic and transport effects, but are yet poorly studied. As a basis, we propose a periodic Markov model on the spatial migration network of breeding, stopover and wintering sites to formally describe the process of animal migration on the population level. From seasonally changing transition rates we derived stable, seasonal densities of animals at the network nodes. We parametrized the model with high-quality GPS and satellite telemetry tracks of white storks ( Ciconia ciconia ) and greater white-fronted geese ( Anser a. albifrons ). Topological and network flow properties of the two derived networks conform to migration properties like seasonally changing connectivity and shared, directed movement. Thus, the model realistically describes the migration movement of complete populations and can become an important tool to study the effects of climate and habitat change and pathogen spread on migratory animals. Furthermore, the property of periodically changing transition rates makes it a new type of complex model and we need to understand its dynamic properties.

A neverending stream : human trafficking in Medieval Europe

2019 ◽  
Author(s):  
◽  
Christopher Paolella
Keyword(s):  
Human Trafficking ◽  
Middle Ages ◽  
Twelfth Century ◽  
Late Antiquity ◽  
Western Europe ◽  
Slave Trade ◽  
Labor Demand ◽  
Sex Industry ◽  
Agricultural Labor ◽  
Long Distance

[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT REQUEST OF AUTHOR.] This study focuses on human trafficking patterns from Late Antiquity to the Early Modern Era. I argue that while slavery, as a means of compelling agricultural labor, disappeared across much of Western Europe by the middle of the twelfth century, the commercial sex industry grew. As slavery died out, the slave trade withered across Western Europe and gradually reoriented itself around the Mediterranean basin. Yet, human trafficking networks remained in Western Europe, if in attenuated form. They continued to supply a smaller, but no less persistent, labor demand that was now fueled by brothels and prostitution rings instead of agriculture. I argue further that the experiences of women link the sex trade and the slave trade, and that twelfth-century socio-economic development linked the earlier long-distance slave trade and the local and regional trafficking networks of the later Middle Ages.

Archaic aetia

2020 ◽  
pp. 40-89
Author(s):  
Anke Walter
Keyword(s):  
Complex Model ◽  
Strong Sense ◽  
New Order ◽  
Present Moment ◽  
The Earth ◽  
The World ◽  
Different Types ◽  
The Stability

The aetiological story of Ate, told by Agamemnon in Book 19 of the Iliad, establishes a connection between the crucial moment when the main conflict of the epic is resolved and an important moment of transition on Olympus. While tying the time of men and the time of gods together in a shared ‘ever since then’, the aetion also marks a growing divide between the two, providing a vivid stratigraphy of Iliadic time. In Hesiod’s Theogony, three aetia that explicitly invoke the poet’s present revolve around the central event of the work, the birth of Zeus: the origin of Hecate’s powers, Zeus’ marking the start of his reign by planting the stone that his father Cronus had swallowed instead of himself in the earth of Delphi, and Prometheus’ theft of fire. These aetia create a particularly meaningful present moment: one that testifies to the different types of divine time and its interaction with human time—including the complex model of time embodied by Hecate and the linearity of time introduced by Zeus—and implicates the audience in the stability of this new order of the world. Finally, in the Homeric Hymn to Hermes, the aetion of how the lyre becomes a token of Hermes’ and Apollo’s friendship imbues the present with a strong sense of the connection with the divine sphere, even while the lyre itself as the instrument accompanying the performance of the hymn vividly enacts its own continuity.

Mobility in Prehistory and Early Historic Times

2019 ◽  
pp. 103-121
Author(s):  
D. W. Harding
Keyword(s):  
Roman Empire ◽  
Material Culture ◽  
Western Europe ◽  
Culture Contact ◽  
Migration And Invasion ◽  
Long Distance ◽  
Dna Analyses ◽  
Documentary History ◽  
The 1960S ◽  
North Western

For most of the twentieth century migration and invasion were the default explanation of material culture change in archaeology. This model was largely derived from the record of documentary history, which not only recorded the Gaulish diaspora of later prehistory but the migrations that resulted in the breakup of the Roman Empire. The equation of archaeological distributions—the formula ‘pots = people’—was a model adopted and promoted by Gordon Childe, and remained fundamental to archaeological interpretation into the 1960s. Thereafter diffusionism was discredited among British prehistorians, though less so among European archaeologists and classical or historical archaeologists. Even the Beaker phenomenon became a ‘cult package’ rather than the product of settlers, and it is only as a result of more recent isotopic and DNA analyses that the scale of settlement from the continent introducing Beakers has begun to be demonstrated. Other factors in culture contact including long-distance trade have long been evident, for example, from the distribution of finds of Baltic amber from Northern and North-Western Europe to the Mediterranean, or the distribution of continental pottery and glass via the western seaways in the post-Roman period.

Package-Interposer-Package (PIP): A Breakthrough Package-on-Package (PoP) Technology for 3D-Integration

2012 ◽  
Vol 2012 (1) ◽  
pp. 000561-000567
Author(s):  
Rabindra N. Das ◽  
Frank D. Egitto ◽  
Barry Bonitz ◽  
Erich Kopp ◽  
Mark D. Poliks ◽  
...  
Keyword(s):  
System Integration ◽  
Integrated Approach ◽  
Power Delivery ◽  
Solder Paste ◽  
3D Integration ◽  
Electrically Conductive ◽  
Reflow Temperature ◽  
Electrically Conductive Adhesive ◽  
The Stability ◽  
Electrical Connections

Package on Package (PoP) stacking has become an attractive method for 3D integration to meet the demands of higher functionality in ever smaller packages, especially when coupled with the use of stacked die. To accomplish this, new packaging designs need to be able to integrate more dies with greater function, higher I/O counts, smaller pitches, and greater heat densities, while being pushed into smaller and smaller footprints. A new 3D “Package Interposer Package” (PIP) solution is suitable for combining multiple memory, ASICs, stacked die, stacked packaged die, etc., into a single package. This approach also favors system integration with high density power delivery by appropriate interposer design and thermal management. Traditional Package on Package (PoP) approaches use direct solder connections between the substrates and are limited to use of single (or minimum) die on the bottom substrate, to reduce warpage and improve stability. For PIP, the stability imparted by the interposer reduces warpage, allowing assemblers of the PIP to select the top and bottom components (substrates, die, stacked die, modules) from various suppliers. This mitigates the problem of variation in warpage trends from room temperature to reflow temperature for different substrates/modules when combined with other packages. PIP facilitates more space-efficient designs, and can accommodate any stacked die height without compromising warpage and stability. PIP can accommodate modules with stacked die on organic, ceramic, or silicon board substrates, where each can be detached and replaced without affecting the rest of the package. Thus, PIP will be economical for high-end electronics, since a damaged, non-factional part of the package can be selectively removed and replaced. A variety of interposer structures were used to fabricate Package Interposer Package (PIP) modules. Electrical connections were formed during reflow using a tin-lead eutectic solder paste. Interconnection among substrates (packages) in the stack was achieved using interposers. Plated through holes in the interposers, formed by laser or mechanical drilling and having diameters ranging from 50 μm to 250 μm, were filled with an electrically conductive adhesive and cured. The adhesive-filled and cured interposers were reflowed with circuitized substrates to produce a PIP structure. In summary, the present work describes an integrated approach to develop 3D PIP constructions on various stacked die or stacked packaged die configurations.

Sign in / Sign up

Export Citation Format

Share Document