Reactive compatibilization of poly(lactic acid)/polyethylene octene copolymer blends with ethylene-glycidyl methacrylate copolymer

2011 ◽  
Vol 31 (6-7) ◽  
Author(s):  
Fang-Cheng Pai ◽  
Hou-Hsein Chu ◽  
Sun-Mou Lai
Keyword(s):  
Lactic Acid ◽  
Impact Strength ◽  
Glycidyl Methacrylate ◽  
Chemical Interaction ◽  
Poly Lactic Acid ◽  
Elongation At Break ◽  
Reactive Compatibilization ◽  
Interfacial Compatibility ◽  
Methacrylate Copolymer ◽  
The Impact

Abstract A melt blending process was used to prepare poly(lactic acid) (PLA)/metallocene catalyzed polyethylene octene copolymer (POE) blends in order to toughen PLA. A commercialized ethylene-glycidyl methacrylate copolymer (EGMA) was applied as a compatibilizer to improve the dispersion and interaction of dispersed POE to the PLA matrix. The results showed that chemical interaction seems to be the driving force for reinforcing the compatibility between PLA and POE, and also the dispersion of POE into the PLA matrix domain. With the incorporation of 10 phr EGMA in the blends, POE was well-dispersed at a sub-micrometer scale within the PLA matrix, indicating better interfacial compatibility between PLA and POE. The impact strength test revealed that POE could significantly toughen PLA containing EGMA in the blends, up to no-break level regarding unnotched Izod impact strength at 10 phr EGMA content. With the increase of EGMA content, the blends showed lower tensile strength, but higher elongation at break due to the elastomeric characteristics of EGMA. When 10 phr of the EGMA was incorporated into the blends, its elongation at break reached 54.5%, 10.7 times that of neat PLA at 5.1%. The melt viscosity of compatibilized blends containing 10 phr EGMA increased by more than 50% in comparison with the non-compatibilized blend, which implied a good interfacial interaction between the PLA and POE interface.

scholarly journals Impact Toughness and Ductility Enhancement of Biodegradable Poly(lactic acid)/Poly(ε-caprolactone) Blends via Addition of Glycidyl Methacrylate

2013 ◽  
Vol 2013 ◽  
pp. 1-8 ◽  
Author(s):  
Wei Kit Chee ◽  
Nor Azowa Ibrahim ◽  
Norhazlin Zainuddin ◽  
Mohd Faizal Abd Rahman ◽  
Buong Woei Chieng
Keyword(s):  
Lactic Acid ◽  
Impact Strength ◽  
Glycidyl Methacrylate ◽  
Interfacial Adhesion ◽  
Tensile Modulus ◽  
Sem Analysis ◽  
Poly Lactic Acid ◽  
Biodegradable Poly ◽  
Interfacial Compatibility ◽  
The Impact

Poly(lactic acid) (PLA)/poly(ε-caprolactone) (PCL) blends were prepared via melt blending technique. Glycidyl methacrylate (GMA) was added as reactive compatibilizer to improve the interfacial adhesion between immiscible phases of PLA and PCL matrices. Tensile test revealed that optimum in elongation at break of approximately 327% achieved when GMA loading was up to 3wt%. Slight drop in tensile strength and tensile modulus at optimum ratio suggested that the blends were tuned to be deformable. Flexural studies showed slight drop in flexural strength and modulus when GMA wt% increases as a result of improved flexibility by finer dispersion of PCL in PLA matrix. Besides, incorporation of GMA in the blends remarkably improved the impact strength. Highest impact strength was achieved (160% compared to pure PLA/PCL blend) when GMA loading was up to 3 wt%. SEM analysis revealed improved interfacial adhesion between PLA/PCL blends in the presence of GMA. Finer dispersion and smooth surface of the specimens were noted as GMA loading increases, indicating that addition of GMA eventually improved the interfacial compatibility of the nonmiscible blend.

scholarly journals A study on the mechanical, thermal properties and crystallization behavior of poly(lactic acid)/thermoplastic poly(propylene carbonate) polyurethane blends

RSC Advances ◽  
2017 ◽  
Vol 7 (73) ◽  
pp. 46183-46194 ◽  
Author(s):  
Jia Yang ◽  
Hongwei Pan ◽  
Xin Li ◽  
Shulin Sun ◽  
Huiliang Zhang ◽  
...  
Keyword(s):  
Lactic Acid ◽  
Thermal Properties ◽  
Impact Strength ◽  
Propylene Carbonate ◽  
Crystallization Behavior ◽  
Raw Materials ◽  
Poly Lactic Acid ◽  
Elongation At Break ◽  
Poly Propylene ◽  
The Impact

PPCU was prepared by using PPC and polyols as the raw materials and diphenyl-methane-diisocyanate (MDI) as the extender chain. The impact strength and elongation at break of PLA were remarkably enhanced by blending with PPCU.

Toughening of Poly(Lactic Acid) by Blending with Poly(Ethylene-co-Octene)

2014 ◽  
Vol 1025-1026 ◽  
pp. 461-465 ◽  
Author(s):  
Sorayut Wongsampanwech ◽  
Pranut Potiyaraj
Keyword(s):  
Lactic Acid ◽  
Glycidyl Methacrylate ◽  
Poly Lactic Acid ◽  
Flexural Properties ◽  
High Modulus ◽  
Polymer Blending ◽  
Polyolefin Elastomer ◽  
Interfacial Compatibility ◽  
Poly Ethylene ◽  
The Impact

Poly (lactic acid) or PLA is one of the most promising biodegradable and bio-based materials commercially available for the manufacturing of environmentally friendly plastic products. Although, PLA has high modulus and biodegradable property, its brittleness and low thermal stability are the disadvantages. Several means have been explored so as to overcome this drawback, i.e. copolymerization, addition of some additives as well as blending with other polymers. The polymer blending technique has attracted the most attention because of its simplicity and economical reason. It was reported that the addition of a polyolefin elastomer e.g. poly (ethylene-co-octene) or POE in PLA matrix can effectively improve its brittleness. The aim of this study is thus to investigate the effect of the amount of POE on mechanical properties of the polymer blends. POE was also modified with glycidyl methacrylate in order to improve the compatibility between the two polymers. The results pointed out that the impact strength of PLA markedly increased while tensile and flexural properties of the blends were slightly lower than that of neat PLA. It was also observed that the tensile and flexural properties were slightly higher when the modified POE was used rather than those with unmodified POE which indicated the improved interfacial compatibility between two polymers.

A Case Study of Recycled Poly(Lactic Acid) Contaminated with Petroleum-Based Thermoplastics Used in Packaging Application

2019 ◽  
Vol 798 ◽  
pp. 279-284
Author(s):  
Pajaera Patanathabutr ◽  
Patiphan Soysang ◽  
Pakjira Leuang-On ◽  
Piyapon Kasetsupsin ◽  
Nattakarn Hongsriphan
Keyword(s):  
Lactic Acid ◽  
Thermal Properties ◽  
Impact Strength ◽  
Poly Lactic Acid ◽  
Mechanical And Thermal Properties ◽  
Elongation At Break ◽  
The Impact ◽  
Multiple Processing

This study was designed to evaluate properties of poly(lactic acid) (PLA) under the postulation that recycled PLA (rPLA) was contaminated with commodity thermoplastics during a typical density-based sorting. Change in clarity, mechanical, and thermal properties of the contaminated rPLA specimens were compared. Clarity of rPLA was reduced showing pale brownish tint when passing multiple processing. Contamination with either PP or HIPS just 1 phr caused rPLA to become opaque, which the transmittance percentage was decreased with respect to contamination content. Compared to pure PLA, the moduli of rPLA was reduced 2.6%. The moduli of rPLA was reduced 4.5-8.2% when contaminated with PP of 1-8 phr, and the moduli was reduced 1.4-4.1% when contaminated with HIPS of 1-8 phr. Elongation at break of PP-contaminated rPLA specimens was reduced with slight increase of impact strength. Elongation at break of HIPS-contaminated rPLA specimens was higher with higher HIPS content, and the impact strength was enhanced up to 64%.

Mechanical, Thermal, and Morphological Properties of Thermoplastic Starch/Poly(lactic acid/Poly(butylene adipate-co-terephthalate) Blends

2014 ◽  
Vol 970 ◽  
pp. 312-316
Author(s):  
Sujaree Tachaphiboonsap ◽  
Kasama Jarukumjorn
Keyword(s):  
Lactic Acid ◽  
Impact Strength ◽  
Interfacial Adhesion ◽  
Tensile Modulus ◽  
Thermoplastic Starch ◽  
Morphological Properties ◽  
Poly Lactic Acid ◽  
Melt Blending ◽  
Elongation At Break ◽  
Blending Method

Thermoplastic starch (TPS)/poly (lactic acid) (PLA) blend and thermoplastic starch (TPS)/poly (lactic acid) (PLA)/poly (butylene adipate-co-terephthalate) (PBAT) blend were prepared by melt blending method. PLA grafted with maleic anhydride (PLA-g-MA) was used as a compatibilizer to improve the compatibility of the blends. As TPS was incorporated into PLA, elongation at break was increased while tensile strength, tensile modulus, and impact strength were decreased. Tensile properties and impact properties of TPS/PLA blend were improved with adding PLA-g-MA indicating the enhancement of interfacial adhesion between PLA and TPS. With increasing PBAT content, elongation at break and impact strength of TPS/PLA blends were improved. The addition of TPS decreased glass transition temperature (Tg), crystallization temperature (Tc), and melting temperature (Tm) of PLA. Tgand Tcof TPS/PLA blend were decreased by incorporating PLA-g-MA. However, the presence of PBAT reduced Tcof TPS/PLA blend. Thermal properties of TPS/PLA/PBAT blends did not change with increasing PBAT content. SEM micrographs revealed that the compatibilized TPS/PLA blends exhibited finer morphology when compared to the uncompatibilized TPS/PLA blend.

scholarly journals Investigation on compatibility of PLA/PBAT blends modified by epoxy-terminated branched polymers through chemical micro-crosslinking

e-Polymers ◽  
2020 ◽  
Vol 20 (1) ◽  
pp. 39-54 ◽  
Author(s):  
Bo Wang ◽  
Yujuan Jin ◽  
Kai’er Kang ◽  
Nan Yang ◽  
Yunxuan Weng ◽  
...  
Keyword(s):  
Lactic Acid ◽  
Glass Transition ◽  
Sem Analysis ◽  
Branched Polymers ◽  
Poly Lactic Acid ◽  
Elongation At Break ◽  
Butylene Terephthalate ◽  
The Difference ◽  
Physical And Chemical ◽  
The Impact

AbstractIn this study, a type of epoxy-terminated branched polymer (ETBP) was used as an interface compati- bilizer to modify the poly lactic acid (PLA)/poly(butylene adipate-co-butylene terephthalate) (PBAT) (70/30) blends. Upon addition of ETBP, the difference in glass transition temperature between PLA and PBAT became smaller. By adding 3.0 phr of ETBP, the elongation at break of the PLA/PBAT blends was found increased from 45.8% to 272.0%; the impact strength increased from 26.2 kJ·m−2 to 45.3 kJ·m−2. In SEM analysis, it was observed that the size of the dispersed PBAT particle decreased with the increasing of ETBP content. These results indicated that the compatibility between PLA and PBAT can be effectively enhanced by using ETBP as the modifier. The modification mechanism was discussed in detail. It proposes that both physical and chemical micro-crosslinking were formed, the latter of which was confirmed by gel content analysis.

Mechanical and Morphological Behavior of Blends Obtained from Biopolymers (PLA/PLC)

2014 ◽  
Vol 775-776 ◽  
pp. 24-28
Author(s):  
Taciana Regina de Gouveia Silva ◽  
Bartira Brandão da Cunha ◽  
Pankaj Agrawal ◽  
Edcleide Maria Araújo ◽  
Tomás Jefférson Alves de Mélo
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Lactic Acid ◽  
Elastic Modulus ◽  
Impact Strength ◽  
Polymer Blends ◽  
Poly Lactic Acid ◽  
Elongation At Break ◽  
Morphology Analysis ◽  
Morphological Behavior

In this work, the effect of the PCL content and E-GMA compatibilizer on the mechanical properties and morphology of poly (lactic acid) - PLA/ poly (ε-caprolactone)-PCL blends was investigated. The results of the mechanical properties showed that there was a reduction in the elastic modulus and tensile strength when PCL was added to PLA. The decrease in the modulus was more pronounced when the PCL content was increased from 10 to 20% (wt). The PLA/PCL/E-GMA blend showed the lower modulus and tensile strength. This blend also presented the higher elongation at break and impact strength. The morphology analysis by SEM showed that the PLA/PCL blends where characterized by lack of adhesion between the PLA and PCL phases. The presence of E-GMA in the PLA/PCL/E-GMA blend improved the adhesion between the PLA and PCL phases.Keywords: poly (latic acid); poly (ε-caprolactone); polymer blends; compatibilizer

Improvement of Poly(Lactic Acid) Properties by Using Acrylonitrile-Butadiene Rubber and Polyethylene-g-Maleic Anhydride

2019 ◽  
Vol 972 ◽  
pp. 178-184
Author(s):  
Sirirat Wacharawichanant ◽  
Chawisa Wisuttrakarn ◽  
Kasana Chomphunoi ◽  
Manop Phankokkruad
Keyword(s):  
Lactic Acid ◽  
Thermal Properties ◽  
Maleic Anhydride ◽  
Thermal Degradation ◽  
Impact Strength ◽  
Mass Loss ◽  
Poly Lactic Acid ◽  
Butadiene Rubber ◽  
Acrylonitrile Butadiene Rubber ◽  
The Impact

This research prepared poly(lactic acid) (PLA) and PLA/acrylonitrile-butadiene rubber (NBR) blends before and after adding polyethylene-g-maleic anhydride with 3 wt% of maleic anhydride (PE-g-MA3) 3 phr. The effects of NBR and PE-g-MA3 on morphological, mechanical and thermal properties of PLA and PLA blends were discussed. The morphological analysis observed the two-phase morphology of PLA/NBR blends, and it was observed the cavities generated due to NBR phase detachment during sample fracture, and droplets of NBR phase at higher NBR content. The PE-g-MA3 addition could improve adhesion between PLA and NBR phases due to the decrease of cavities in PLA matrix and droplet size of NBR. The mechanical properties showed the impact strength and strain at break of PLA/NBR blends dramatically increased when the amount of NBR increasing. The addition of PE-g-MA3 significantly improved the impact strength of PLA/NBR blends. The thermal properties showed the NBR addition had effect slightly on the melting temperature of PLA/NBR blends. The filling of NBR and PE-g-MA3 greatly decreased the percent crystallinity of PLA more than two times. The thermal degradation of pure PLA and NBR proceeds by one step, while the thermal degradation process of PLA/NBR and PLA/PE-g-MA3 proceeds by two steps. Which the first step showed a large mass loss of PLA degradation and the second step showed a small mass loss of PE-g-MA and NBR degradation.

Sign in / Sign up

Export Citation Format

Share Document