Effects of sugar cane bagasse ash as a cement replacement on properties of mortars

2012 ◽  
Vol 19 (3) ◽  
pp. 279-285 ◽  
Author(s):  
Mao-Chieh Chi
Keyword(s):  
Compressive Strength ◽  
Portland Cement ◽  
Water Absorption ◽  
Sugar Cane ◽  
Drying Shrinkage ◽  
Sugar Cane Bagasse ◽  
Initial Surface ◽  
Absorption Test ◽  
Surface Absorption ◽  
Sugar Cane Bagasse Ash

AbstractSugar cane bagasse ash (SCBA), a by-product of sugar and alcohol production, is one of the potential pozzolanic material that can be blended with Portland cement. In this study, SCBA with particle sizes <45 μm was used to replace type I ordinary Portland cement with various dosages (10%, 20%, and 30%) by weight of binder. The water/cementitious material (w/cm) and sand/binder ratios were kept at constants of 0.55 and 2.75, respectively. Composites were mixed, and effects of SCBA on properties were investigated by conducting flow test, water absorption test, initial surface absorption test, drying shrinkage test, compressive strength test, rapid chloride penetration test (RCPT), thermal gravimetric analysis (TGA), and scanning electron microscopy (SEM). Experimental results show that the flow spread of fresh mortars would decrease with an increase of SCBA replacement. The specimens with 10% SCBA have the superior performance on compressive strength, drying shrinkage, water absorption, initial surface absorption, and chloride ion penetration, TGA, and SEM at the age of 56 days. It indicates that 10% cement replacement of SCBA may be considered as the optimum limit.

scholarly journals Physical, Mechanical and Durability Properties of Ecofriendly Ternary Concrete Made with Sugar Cane Bagasse Ash and Silica Fume

Crystals ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 1012
Author(s):  
Laura Landa-Ruiz ◽  
Aldo Landa-Gómez ◽  
José M. Mendoza-Rangel ◽  
Abigail Landa-Sánchez ◽  
Hilda Ariza-Figueroa ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Electrical Resistivity ◽  
Portland Cement ◽  
Physical Properties ◽  
Silica Fume ◽  
Sugar Cane ◽  
Sugar Cane Bagasse ◽  
Conventional Concrete ◽  
Durability Properties ◽  
Sugar Cane Bagasse Ash

In the present investigation, the physical, mechanical and durability properties of six concrete mixtures were evaluated, one of conventional concrete (CC) with 100% Portland cement (PC) and five mixtures of Ecofriendly Ternary Concrete (ETC) made with partial replacement of Portland Cement by combinations of sugar cane bagasse ash (SCBA) and silica fume (SF) at percentages of 10, 20, 30, 40 and 50%. The physical properties of slump, temperature, and unit weight were determined, as well as compressive strength, rebound number, and electrical resistivity as a durability parameter. All tests were carried out according to the ASTM and ONNCCE standards. The obtained results show that the physical properties of ETC concretes are very similar to those of conventional concrete, complying with the corresponding regulations. Compressive strength results of all ETC mixtures showed favorable performances, increasing with aging, presenting values similar to CC at 90 days and greater values at 180 days in the ETC-20 and ETC-30 mixtures. Electrical resistivity results indicated that the five ETC mixtures performed better than conventional concrete throughout the entire monitoring period, increasing in durability almost proportionally to the percentage of substitution of Portland cement by the SCBA–SF combination; the ETC mixture made with 40% replacement had the highest resistivity value, which represents the longest durability. The present electrical resistivity indicates that the durability of the five ETC concretes was greater than conventional concrete. The results show that it is feasible to use ETC, because it meets the standards of quality, mechanical resistance and durability, and offers a very significant and beneficial contribution to the environment due to the use of agro-industrial and industrial waste as partial substitutes up to 50% of CPC, which contributes to reduction in CO2 emissions due to the production of Portland cement, responsible for 8% of total emissions worldwide.

Properties of self-leveling mortars incorporating a high-volume of sugar cane bagasse ash as partial Portland cement replacement

2020 ◽  
Vol 32 ◽  
pp. 101694
Author(s):  
Marcos A.S. Anjos ◽  
Tomaz R. Araújo ◽  
Ruan L.S. Ferreira ◽  
Evilane C. Farias ◽  
Antonio E. Martinelli
Keyword(s):  
Portland Cement ◽  
Sugar Cane ◽  
High Volume ◽  
Sugar Cane Bagasse ◽  
Cement Replacement ◽  
Sugar Cane Bagasse Ash

scholarly journals Influences of shrinkage reducing admixture on the mechanical properties, drying shrinkage, water absorption and porosity of Portland cement mortar

2021 ◽  
Vol 15 (3) ◽  
pp. 55-67
Author(s):  
Nguyen Van Chinh
Keyword(s):  
Compressive Strength ◽  
Flexural Strength ◽  
Portland Cement ◽  
Water Absorption ◽  
Drying Shrinkage ◽  
Effective Porosity ◽  
Minor Effect ◽  
Wide Range ◽  
Shrinkage Reducing Admixture ◽  
A Minor

Drying shrinkage is the main cause of early age cracking of concrete and mortar. A wide range of research has been conducted to reduce the drying shrinkage, including using fibres or chemical admixtures. This paper investigated the effect of shrinkage reducing admixture on the flexural strength, compressive strength, drying shrinkage, water absorption and porosity of mortar. The mix compositions were ordinary Portland cement (OPC) : sand : liquid = 1: 1: 0.38 in which liquid consisted of water and shrinkage reducing admixture (SRA). SRA was used at the proportions of 2%, 4%, and 7% by weight of cement. The test results show that SRA reduces the flexural and compressive strengths of mortar. The reduction in flexural strength and compressive strength at 28 days is 14% and 25%, respectively at 7% SRA dosage. In addition, SRA significantly reduces the drying shrinkage and water absorption of mortar. At 7% SRA dosage, the drying shrinkage at 53 days is reduced by 60% while the water absorption rate at 24 hours is reduced by 54%. However, SRA has a minor effect on the pore size distribution, effective porosity, and cumulative intrusion volume of mortar.

Durability of Sugar Cane Bagasse Ash (SCBA) Concrete towards Chloride Ion Penetration

2014 ◽  
Vol 567 ◽  
pp. 369-374 ◽  
Author(s):  
Nasir Shafiq ◽  
Asma Abd Elhsameed ◽  
Muhd Fadhil Nuruddin
Keyword(s):  
Weight Loss ◽  
Compressive Strength ◽  
Penetration Depth ◽  
Sugar Cane ◽  
Fine Particles ◽  
Strength Loss ◽  
Sugar Cane Bagasse ◽  
Chloride Penetration ◽  
Chloride Ingress ◽  
Sugar Cane Bagasse Ash

In this study, the effect of sugar cane bagasse ash (SCBA) on chloride penetration resistance of concrete was investigated. 100-mm side cubes were cast and cured in water for 28 days followed by six months curing in 4% NaCl solution. The resistance to chloride penetration was assessed by measuring the chloride penetration depth, weight loss, compressive strength loss and bond strength loss. Chloride penetration depth was measured using AgNO3–based method. It was obtained that inclusion of SCBA in concrete significantly reduced the chloride penetration depth, weight loss, compressive strength loss and bond loss that was attributed to the fine particles of SCBA that filled up the pores and prevented the chloride ingress in the concrete.

scholarly journals Permeation Resistance of Sawdust Ash Blended Cement Laterized Concrete

2019 ◽  
Vol 21 (2) ◽  
pp. 76-83 ◽  
Author(s):  
Samuel Olufemi Folagbade ◽  
Aluko Olawale
Keyword(s):  
Compressive Strength ◽  
Portland Cement ◽  
Blended Cement ◽  
The Other ◽  
Partial Replacement ◽  
Initial Surface ◽  
Surface Absorption ◽  
Conventional Concrete ◽  
Other Hand ◽  
Curing Age

This paper compared the initial surface absorption of conventional concrete and laterized concrete containing Portland cement (PC) and sawdust ash (SDA). Laterized concrete was produced at laterite contents of 15 and 30% as partial replacement for sand and SDA contents of 10 and 20% as partial replacement for PC. Compressive strengths at 28 days and initial surface absorption after 10 minutes (ISA-10) at 28, 60 and 90 days were determined at the water/cement ratios of 0.35, 0.50 and 0.65 and assessed at equal 28-day strengths of 25-35 N/mm2. At equal water/cement ratios, compressive strength reduced and ISA-10 increased with increasing content of laterite and SDA. On the other hand, compressive strength and resistance to surface absorption of the blended cement laterized concretes increased with increasing curing age. At equal strengths, all the blended cement laterized concretes have better resistance to surface absorption than the conventional PC concrete.

Sugar cane bagasse ash as a partial substitute of Portland cement: Effect on mechanical properties and emission of carbon dioxide

2020 ◽  
Vol 8 (2) ◽  
pp. 103655 ◽  
Author(s):  
Romildo A. Berenguer ◽  
Ana Paula B. Capraro ◽  
Marcelo H. Farias de Medeiros ◽  
Arnaldo M.P. Carneiro ◽  
Romilde A. De Oliveira
Keyword(s):  
Mechanical Properties ◽  
Carbon Dioxide ◽  
Portland Cement ◽  
Sugar Cane ◽  
Sugar Cane Bagasse ◽  
Sugar Cane Bagasse Ash

The Effect of Palm Oil Fuel Ash as a Cementreplacement Material on Self-Compacting Concrete

2014 ◽  
Vol 567 ◽  
pp. 529-534 ◽  
Author(s):  
Belal Alsubari ◽  
Payam Shafigh ◽  
Mohd Zamin Jumaat ◽  
Ubagaram Johnson Alengaram
Keyword(s):  
Compressive Strength ◽  
Palm Oil ◽  
Drying Shrinkage ◽  
Initial Surface ◽  
Fresh Properties ◽  
Self Compacting Concrete ◽  
Surface Absorption ◽  
Palm Oil Fuel Ash ◽  
Fuel Ash ◽  
Oil Fuel

In this study ground palm oil fuel ash (POFA) has been used as cement replacement in percentages of 0%, 10%, and 20% in a self-compacting concrete (SCC). Fresh properties such as slump flow, T50, V-funnel, J-ring, L-box and segregation index; concrete properties such as drying shrinkage strain, initial surface absorption test (ISAT) as well as compressive strength were investigated. Test results showed that substitution of cement with POFA up to 20%, the fresh properties of the concrete fulfilled the requirements of a self-compacting concrete. The results revealed that concrete has higher compressive strength, lower drying shrinkage, and lower initial surface absorption than control mix. The results indicated that POFA can be used up to 20% as a cement replacement material for producing self-compacting concrete.

Compressive Strength and Shrinkage Behavior of Concrete Produced from Portland Limestone Cement with Water Absorption Polymer Balls

2020 ◽  
Vol 857 ◽  
pp. 83-88
Author(s):  
Ikram F. Ahmed Al-Mulla ◽  
Ammar S. Al-Rihimy ◽  
Mushriq F. Al-Shamaa
Keyword(s):  
Compressive Strength ◽  
Portland Cement ◽  
Water Absorption ◽  
Ordinary Portland Cement ◽  
Drying Shrinkage ◽  
Internal Curing ◽  
Early Age ◽  
Portland Limestone Cement ◽  
Limestone Cement ◽  
Shrinkage Behavior

From the sustainability point of view a combination of using water absorption polymer balls in concrete mix produce from Portland limestone cement (IL) is worth to be perceived. Compressive strength and drying shrinkage behavior for the mixes of concrete prepared by Ordinary Portland Cement (O.P.C) and Portland limestone cement (IL) were investigated in this research. Water absorbent polymer balls (WAPB) are innovative module in producing building materials due to the internal curing which eliminates autogenous shrinkage, enhances the strength at early age, improve the durability, give higher compressive strength at early age, and reduce the effect of insufficient external curing. Polymer balls (WAPB) had been used in the mixes of this research to provide good progress in compressive strength with time. Water absorption polymer balls have the ability to absorb water and after usage in concrete it will spill it out and shrink leaving voids of their own diameter before shrinking that lead to provide internal curing. The required quantity of water for the mixes were reduced due to the addition of water from the absorption polymers. Mixes produced from Portland limestone cement in this research show drying shrinkage results and compressive strength results lower than mixes made from ordinary Portland cement.

Sign in / Sign up

Export Citation Format

Share Document