Crystallization of nanosized titania particles prepared by the sol-gel process

1994 ◽  
Vol 9 (8) ◽  
pp. 2102-2108 ◽  
Author(s):  
E. Haro-Poniatowski ◽  
R. Rodríguez-Talavera ◽  
Heredia M. de la Cruz ◽  
O. Cano-Corona ◽  
R. Arroyo-Murillo
Keyword(s):  
Particle Size ◽  
Steady State ◽  
Light Scattering ◽  
Sol Gel ◽  
X Ray ◽  
Constant Size ◽  
Size Profile ◽  
Nanosized Titania ◽  
Sol Gel Process ◽  
Kinetics Of

Sols of titania were obtained by the sol-gel method and their size profile was followed by dynamical light scattering. In the early stages of the reaction an unstable behavior was detected. After this unstable regime the particle size reaches a steady state where the sols have a constant size while increasing in number. Once the sol concentration reaches its overlap value, the gelation regime takes place. For samples prepared in this way Raman spectra and x-ray diffractometry were used to characterize the kinetics of crystallization of the material.

scholarly journals Effect of Additives on Characterization and Photocatalytic Activity of /ZnO Nanocomposite Prepared via Sol-Gel Process

2012 ◽  
Vol 2012 ◽  
pp. 1-5 ◽  
Author(s):  
Shahram Moradi ◽  
Parviz Aberoomand Azar ◽  
Sanaz Raeis Farshid ◽  
Saeed Abedini Khorrami ◽  
Mohammad Hadi Givianrad
Keyword(s):  
Particle Size ◽  
Photocatalytic Activity ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Batch Reactor ◽  
Sol Gel ◽  
Methyl Cellulose ◽  
X Ray ◽  
Sol Gel Process ◽  
Poly Ethylene

TiO2/ZnO nanocomposites were prepared by the sol-gel method with and without addatives such as carboxy methyl cellulose (CMC), poly(ethylene glycol) (PEG), polyvinylpyrrolidon, (PVP), and hydroxylpropylcellulose (HPC). The characteristics of the prepared TiO2/ZnO nanocomposites were identified by IR spectra, X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDS) methods. The additives have a significant effect on the particle size distribution and photocatalytic activity of TiO2/ZnO nanocomposites. The photocatalytic activity of the synthesized nanocomposites was investigated for decolorization of methyl orange (MO) in water under UV-irradiation in a batch reactor and the results showed that the photocatalytic activity of the nanocomposites have been increased by CMC, PEG, PVP, and HPC, respectively. SEM has shown that the particle size distribution of TiO2/ZnO nanocomposite in the presence of HPC was better than the other samples.

Preparation and Characterization of (Ba0.88Ca0.12)(Zr0.12Ti0.88)O3 Powders and Ceramics Produced by Sol-Gel Process

2010 ◽  
Vol 148-149 ◽  
pp. 1062-1066 ◽  
Author(s):  
Ren Bo Yang ◽  
Wei Guo Fu ◽  
Xiang Yun Deng ◽  
Zhong Wen Tan ◽  
Yan Jie Zhang ◽  
...  
Keyword(s):  
Differential Scanning Calorimetry ◽  
Particle Size ◽  
Piezoelectric Coefficient ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Thermo Gravimetric ◽  
X Ray ◽  
Sol Gel Process

The (Ba0.88Ca0.12)( Zr0.12Ti0.88)O3 powders and piezoelectric ceramics were prepared by sol-gel process. The reaction process was analyzed with the help of thermo gravimetric and differential scanning calorimetry. X-ray diffraction characterized results showed that the structure of the (Ba0.88Ca0.12)( Zr0.12Ti0.88)O3 powders was perovskite structure and the particle size was approximately 37nm. Piezoelectric measurements revealed that Curie temperature and the maximum piezoelectric coefficient d33 is 95°C and 215pm/V, respectively.

Effect of Annealing temperature on the Structural and Magnetic Properties of TbxY3-xFe5O12(x = 0.0, 1.0, 2.0) Thin Films Prepared by Sol-Gel Process

2012 ◽  
Vol 501 ◽  
pp. 236-241 ◽  
Author(s):  
Ftema W. Aldbea ◽  
Noor Bahyah Ibrahim ◽  
Mustafa Hj. Abdullah ◽  
Ramadan E. Shaiboub
Keyword(s):  
Thin Films ◽  
Magnetic Properties ◽  
Room Temperature ◽  
Annealing Temperature ◽  
Sol Gel ◽  
Vibrating Sample Magnetometer ◽  
X Ray ◽  
Garnet Phase ◽  
Sol Gel Process ◽  
Amorphous Structures

Thin films nanoparticles TbxY3-xFe5O12 (x=0.0, 1.0, 2.0) were prepared by the sol-gel process followed by annealing process at various annealing temperatures of 700° C, 800° C and 900° C in air for 2 h. The results obtained from X-ray diffractometer (XRD) show that the films annealed below 900°C exhibit peaks of garnet mixed with small amounts of YFeO3 and Fe2O3. Pure garnet phase has been detected in the films annealed at 900°C. Before annealing the films show amorphous structures. The particles sizes measurement using the field emission scanning electron microscope (FE-SEM) showed that the particles sizes increased as the annealing temperature increased. The magnetic properties were measured at room temperature using the vibrating sample magnetometer (VSM). The saturation magnetization (Ms) of the films also increased with the annealing temperature. However, different behavior of coercivity (Hc) has been observed as the annealing temperature was increased.

scholarly journals Sol-Gel Synthesis of the Double Perovskite Sr2FeMoO6 by Microwave Technique

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 3876
Author(s):  
Jesús Valdés ◽  
Daniel Reséndiz ◽  
Ángeles Cuán ◽  
Rufino Nava ◽  
Bertha Aguilar ◽  
...  
Keyword(s):  
Particle Size ◽  
Hydrothermal Synthesis ◽  
Microwave Radiation ◽  
Structural Characteristics ◽  
Sol Gel ◽  
Synthesis Method ◽  
Double Perovskite ◽  
Synthesis Methods ◽  
X Ray ◽  
Sol Gel Synthesis

The effect of microwave radiation on the hydrothermal synthesis of the double perovskite Sr2FeMoO6 has been studied based on a comparison of the particle size and structural characteristics of products from both methods. A temperature, pressure, and pH condition screening was performed, and the most representative results of these are herein presented and discussed. Radiation of microwaves in the hydrothermal synthesis method led to a decrease in crystallite size, which is an effect from the reaction temperature. The particle size ranged from 378 to 318 nm when pH was 4.5 and pressure was kept under 40 bars. According to X-ray diffraction (XRD) results coupled with the size-strain plot method, the product obtained by both synthesis methods (with and without microwave radiation) have similar crystal purity. The Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray Spectroscopy (EDS) techniques showed that the morphology and the distribution of metal ions are uniform. The Curie temperature obtained by thermogravimetric analysis indicates that, in the presence of microwaves, the value was higher with respect to traditional synthesis from 335 K to 342.5 K. Consequently, microwave radiation enhances the diffusion and nucleation process of ionic precursors during the synthesis, which promotes a uniform heating in the reaction mixture leading to a reduction in the particle size, but keeping good crystallinity of the double perovskite. Precursor phases and the final purity of the Sr2FeMoO6 powder can be controlled via hydrothermal microwave heating on the first stages of the Sol-Gel method.

Luminescent Properties of Zn2SiO4:Eu3+,Dy3+ Phosphors via Sol-Gel Process

2012 ◽  
Vol 217-219 ◽  
pp. 733-736
Author(s):  
Xiu Mei Han ◽  
Shu Ai Hao ◽  
Ying Ling Wang ◽  
Gui Fang Sun ◽  
Xi Wei Qi
Keyword(s):  
Thermal Analysis ◽  
Ir Spectra ◽  
Sol Gel ◽  
Luminescent Properties ◽  
Photoluminescence Spectra ◽  
X Ray Diffraction ◽  
X Ray ◽  
Sol Gel Process ◽  
Ft Ir

Zn2SiO4:Eu3+, Dy3+ phosphors have been prepared through the sol-gel process. X-ray diffraction (XRD), thermogravimetric and ddifferential thermal analysis (TG-DTA), FT-IR spectra and photoluminescence spectra were used to characterize the resulting phosphors. The results of XRD indicated that the phosphors crystallized completely at 1000oC. In Zn2SiO4:Eu3+,Dy3+ phosphors, the Eu3+ and Dy3+ show their characteristic red(613nm, 5D0-7F2), blue (481nm, 4F9/2–6H15/2) and yellow (577nm, 4F9/2–6H13/2) emissions.

Annealing Effects on the Physical and Magnetic Properties of Tb1.5Y1.5Fe5O12 Films Nanoparticles Prepared by Sol-Gel Method

2013 ◽  
Vol 756 ◽  
pp. 91-98 ◽  
Author(s):  
Ftema W. Aldbea ◽  
Noor Bahyah Ibrahim ◽  
Mustafa Hj. Abdullah
Keyword(s):  
Particle Size ◽  
Magnetic Properties ◽  
Annealing Temperature ◽  
Quartz Substrate ◽  
Sol Gel ◽  
Lattice Parameter ◽  
Gel Method ◽  
X Ray ◽  
Sol Gel Method ◽  
Iron Garnet

Terbium –substituted yttrium iron garnet (Tb1.5Y1.5Fe5O12) films nanoparticles were successfully prepared by a sol-gel method. The films were deposited on the quartz substrate using spin coating technique. To study effect of annealing temperature, the annealing process was executed at 700, 800 and 900 °C in air for 2 hours. The X-ray diffraction (XRD) proved that the pure phase of garnet structure was detected for the film annealed at 900 °C. The lattice parameter increased with the increment of annealing temperature and the highest value of 12.35 Å was obtained at 900 °C. Field Emission Scanning Electron Microscope (FE-SEM) results showed that the particle size increased from 43nm to 56nm as annealing temperature increased from 700 to 900°C. The film’s thickness also affected by increasing of annealing temperature and become thin at 900 °C due to densification process occurred at high annealing temperature. The elemental compositions of the Tb1.5Y1.5Fe5O12 film were detected using an Energy Dispersive X-raySpectroscopy (EDX). Magnetic properties at room temperature were measured using a Vibrating Sample Magnetometer (VSM).The saturation magnetization Ms increased with the annealingtemperature and showed a high value of 104emu/cm3, but the coercivity Hc of the film was decreased due to the increment of the particle size. Normal 0 21 false false false MS X-NONE X-NONE MicrosoftInternetExplorer4 Terbium –substituted yttrium iron garnet (Tb1.5Y1.5Fe5O12) films nanoparticles were successfully prepared by a sol-gel method. The films were deposited on the quartz substrate using spin coating technique. To study effect of annealing temperature, the annealing process was executed at 700, 800 and 900°C in air for 2 hours. The X-ray diffraction (XRD) proved that the pure phase of garnet structure was detected for the film annealed at 900 °C. The lattice parameter increased with the increment of annealing temperature and the highest value of 12.35 Å was obtained at 900 °C. Field Emission Scanning Electron Microscope (FE-SEM) results showed that the particle size increased from 43nm to 56nm as annealing temperature increased from 700 to 900 °C. The film’s thickness also affected by increasing of annealing temperature and become thin at 900 °C due to densification process occurred at high annealing temperature. The elemental compositions of the Tb1.5Y1.5Fe5O12 film were detected using an Energy Dispersive X-ray Spectroscopy (EDX). Magnetic properties at room temperature were measured using a Vibrating Sample Magnetometer (VSM).The saturation magnetization Ms increased with the annealing temperature and showed a high value of 104emu/cm3, but the coercivity Hc of the film was decreased due to the increment of the particle size. st1\:*{behavior:url(#ieooui) } /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

Nanostructured Doped Silica Films Application as Sensitive Layers for Chemical Sensors

2013 ◽  
Vol 684 ◽  
pp. 7-11
Author(s):  
Sergey Krutovertsev ◽  
Alla Tarasova ◽  
Olga Ivanova ◽  
Larisa Krutovertseva
Keyword(s):  
Initial Conditions ◽  
Sol Gel ◽  
Silica Films ◽  
Adsorption Activity ◽  
Developed Surface ◽  
Sol Gel Process ◽  
Sensitive Characteristics ◽  
The Right ◽  
Kinetics Of ◽  
Matrix Factors

The sensor behavior of nanostructured doped silica films produced by sol-gel way were examined. Hygroscopic substances and polyoxometalates were used as additives to make more significant sensitive characteristics of initial matrix. Factors that have effect on sol preparation and films forming were investigated. Adsorption activity of the sensitive films was studied and it was shown that the films had a highly developed surface with nano-size pores. Change of initial conditions of sol-gel process gives opportunity to influence on kinetics of gel formation and consequently, on structure and properties of final materials. The study showed that the conditions of the environment affected the sensors characteristics markedly, which can be improved by choosing of the right procedure of forming and treatment. Influence of type and additive substances quantity into doped films was discussed in the paper

Sol-Gel derived Bi4-xNdxTi3O12 Thin Films and Their Characterization

2002 ◽  
Vol 737 ◽  
Author(s):  
R.E. Melgarejo ◽  
M.S. Tomar ◽  
A. Hidalgo ◽  
R.S. Katiyar
Keyword(s):  
Thin Films ◽  
Spin Coating ◽  
Bismuth Titanate ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
X Ray ◽  
Complete Solid Solution ◽  
Sol Gel Process ◽  
Ferroelectric Memory ◽  
Initial Results

ABSTRACTNd substituted bismuth titanate Bi4-xNdxTi3O12 were synthesized by sol-gel process and thin films were deposited on Pt substrate (Pt/TiO2/SiO2/Si) by spin coating. Thin films, characterized by X-ray diffraction and Raman spectroscopy, shows complete solid solution up to the composition x < 1. Initial results indicate that the ferroelectric polarization increases with increasing Nd content in the film with 2Pr = 50μC/cm2 for x = 0.46, which may have application in non-volatile ferroelectric memory devices.

Time-Resolved Small Angle X-Ray Scattering and Dynamic Light Scattering Studies of Sol-Gel Transition in Gelatin

1988 ◽  
Vol 143 ◽  
Author(s):  
Dan Q. Wu ◽  
Benjamin Chu
Keyword(s):  
Light Scattering ◽  
Cross Section ◽  
Sol Gel ◽  
Slow Mode ◽  
Time Resolved ◽  
X Ray ◽  
X Ray Scattering ◽  
Saxs Intensity ◽  
Sol Gel Transition ◽  
Gel Transition

AbstractStructural and dynamical properties of an aqueous gelatin solution (5 wt%, 0.1M NaCi, pH=7) in a sol-gel transition were studied by time-resolved small angle x-ray scattering (SAXS) and dynamic light scattering (DLS) after quenching the gelatin sol at ∼45”C to 11°C. SAXS intensity measurements suggested the presence of gel fibrils which grew initially in cross-section. The average cross-section of the gel fibrils reached a constant value after an initial growth period of ∼800 sec. Further increase in SAXS intensity could be attributed to the increase in the length of the gel fibrils. Photon correlation, on the other hand, clearly showed two relaxation modes in both the sol and the gel (∼1 hr after the quenching process) states: a fast cooperative diffusion mode which remained constant from the sol to the gel state after correction for the temperature dependence of solvent viscosity; and a slow mode that could be attributed to the self-diffusion of the “free” gelatin chains and aggregates. The slow mode contribution to the time correlation function was reduced from ∼40% in sol to ∼20% in gel signaling a decrease but not the elimination of “free” particles in the gel network. The decrease in the intensity contribution by the slow mode is, however, accompanied by a large increase in the characteristic line-width distribution.

Sign in / Sign up

Export Citation Format

Share Document