Direct Synthesis of Pure Radiative Vo2 (M) Plate Like Structures Via Hydrothermolysis at Low Temperature

2012 ◽  
Vol 1406 ◽  
Author(s):  
A. Simo ◽  
L.C. Edomwonyi-Otu ◽  
R. Madjoe ◽  
M. Maaza
Keyword(s):  
Direct Synthesis ◽  
High Surface ◽  
Total Reflection ◽  
Attenuated Total Reflection ◽  
X Ray Diffraction ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Vibrational Bands ◽  
High Surface Energy ◽  
Scanning Electron

ABSTRACTFacile and direct synthesis of radiative VO2 (M) plate-like is reported. The snowflake material presents superstructures plate-like aggregate with an anisotropic orientation in shape governed by V2O5 and NaOH concentration giving high surface energy liable for chemical reactions with the medium. Pure crystalline VO2 (M) has been obtained with a complete hydrothermolysis of the precursor. The morphological, structural, elemental composition, crystallinity and vibrational bands of the powders were characterized by Powder X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Selected Area Electron Diffraction (SAED) and Fourier Transform-Attenuated Total Reflection (FTIR-ATR) infrared spectroscopy.

scholarly journals Pengamatan Surface Plasmon Resonance pada ZnO Nanorods dengan Menggunakan Konfigurasi Prisma/Au/ZnO

2020 ◽  
Vol 23 (1) ◽  
pp. 27
Author(s):  
Rina Dewi Mayasari ◽  
Ajeng Novita Sari ◽  
Aditya Eka Mulyono ◽  
Agus Setyo Budi ◽  
Ratno Nuryadi
Keyword(s):  
Surface Plasmon Resonance ◽  
Surface Plasmon ◽  
Plasmon Resonance ◽  
Zno Nanorods ◽  
Total Reflection ◽  
Attenuated Total Reflection ◽  
X Ray Diffraction ◽  
X Ray ◽  
20 Nm ◽  
Scanning Electron

Pengamatan fenomena surface plasmon resonance (SPR) telah berhasil dilakukan pada ZnO nanorods yang ditumbuhkan di atas lapisan tipis emas. Sistem SPR menggunakan konfigurasi Kretschmann termodifikasi dimana permukaan prisma dideposisi dengan lapisan tipis emas dan ZnO nanorods (prisma/Au/ZnO). Penumbuhan ZnO nanorods menggunakan metode hidrotermal dengan dua tahapan, yaitu pelapisan ZnO seed dan penumbuhan rods. Waktu penumbuhan divariasikan selama 5 menit, 2 jam, dan 4 jam, pada suhu 95 °C yang diikuti dengan annealing pada suhu 500 °C selama 1 jam. Struktur ZnO dikarakterisasi dengan X-ray diffraction (XRD), field emission scanning electron microscope - energy dispersive X-ray spectroscopy (FESEM-EDS), serta diamati fenomena SPR melalui grafik attenuated total reflection (ATR). Hasil karakterisasi menunjukkan bahwa ZnO nanorods (2 jam dan 4 jam) memiliki struktur kristal heksagonal dengan distribusi ukuran diameter pada rentang 20 nm – 60 nm. Fenomena SPR hanya teramati pada nanopartikel ZnO (5 menit) pada sudut SPR (θSPR) 58,2°. Fenomena SPR tidak terlihat pada ZnO nanorods (2 jam dan 4 jam) dikarenakan panjang rods melebihi 100 nm.

Solvothermal Synthesis of Bi2Se3 Hexagonal Nanosheet Crystals

2011 ◽  
Vol 236-238 ◽  
pp. 1712-1716 ◽  
Author(s):  
Hai Tao Liu ◽  
Jun Dai ◽  
Jia Jia Zhang ◽  
Wei Dong Xiang
Keyword(s):  
Electron Microscope ◽  
Solvothermal Synthesis ◽  
Solvothermal Method ◽  
Raw Materials ◽  
X Ray Diffraction ◽  
Uniform Size ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Scanning Electron

Bismuth selenide (Bi2Se3) hexagonal nanosheet crystals with uniform size were successfully prepared via a solvothermal method at 160°C for 22 h using bismuth trichloride(BiCl3) and selenium powder(Se) as raw materials, sodium bisulfite(NaHSO3) as a reducing agent, diethylene glycol(DEG) as solvent, and ammonia as pH regulator. Various techniques such as X-ray diffraction (XRD), field-emission scanning electron microscope (FESEM), high-resolution transmission electron microscope (HRTEM), and selected area electron diffraction (SAED) were used to characterize the obtained products. Results show that the as-synthesized samples are pure Bi2Se3 hexagonal nanosheet crystals. A possible growth mechanism for Bi2Se3 hexagonal nanosheet crystals is also discussed based on the experiment.

Physicochemical Characteristics of an Ultra-Thin Hydrophobic Trichlorosilanes Using SiO2 as Adhesion

2019 ◽  
Vol 796 ◽  
pp. 80-87
Author(s):  
Akinsanya Damilare Baruwa ◽  
Esther Titilayo Akinlabi ◽  
Oluseyi Philip Oladijo ◽  
Stephen Akinwale Akinlabi ◽  
Jeff Chinn
Keyword(s):  
Room Temperature ◽  
Electrochemical Impedance ◽  
Physicochemical Characteristics ◽  
Total Reflection ◽  
Attenuated Total Reflection ◽  
Natural Seawater ◽  
X Ray Diffraction ◽  
X Ray ◽  
Hydrophobic Silane ◽  
Better Than

The aim of the research is to subject the three different silanes to chemical and electrochemical investigations in other to determine the most efficient organic compound. Three types of hydrophobic silanes [Tris (Trimethylsiloxy) silyethyl] dimethylchlorosilane (Alkyl); Tridecafloro-1,1,2,2-tetrahydrooctyltrichlorosilane (FOTS) and Henicosyl-1,1,2,2-tetrahydrododecyltricholrosilane (FDDTS) are presented and investigated. The three silanes are of different composition but are deposited at the same parameters and conditions. The chemical investigation was studied through (attenuated total reflection Fourier-transform infrared (ATR-FTIR) and x-ray diffraction (XRD), while the electrochemical study was conducted through EIS using natural seawater electrolyte at room temperature. From the investigation techniques, only electrochemical impedance results show that FDDTS performed better than both Alkyl and FOTS. The chemical analysis showed the presence of hydrophobic silane on all the coated samples, and no distinction can be drawn from associated peaks.

FABRICATION AND CHARACTERISTICS OF ALN NANOWIRES

2001 ◽  
Vol 15 (30) ◽  
pp. 1455-1458 ◽  
Author(s):  
H. CHEN ◽  
X. K. LU ◽  
S. Q. ZHOU ◽  
X. H. HAO ◽  
Z. X. WANG
Keyword(s):  
Crystal Structure ◽  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Single Phase ◽  
X Ray Diffraction ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Sublimation Method ◽  
Scanning Electron

Single phase AlN nanowires are fabricated by a sublimation method. They were characterized by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), typical selected area electron diffraction (SAED) and high-resolution transmission electron microscopy (HRTEM). The SEM and TEM images show that most of the nanowires have diameters of about 10–60 nm. The crystal structure of AlN nanowires revealed by XRD, SAED and HRTEM shows the AlN nanowires have a wurtzite structure.

Synthesis and Analysis of High Surface Area Vanadium Carbide Nanoparticles

2012 ◽  
Vol 585 ◽  
pp. 95-99 ◽  
Author(s):  
M. Mahajan ◽  
K. Singh ◽  
O.P. Pandey
Keyword(s):  
Surface Area ◽  
Vanadium Carbide ◽  
High Surface ◽  
High Surface Area ◽  
X Ray Diffraction ◽  
High Melting Point ◽  
X Ray ◽  
Transmission Electron ◽  
Product Powder ◽  
Scanning Electron

Vanadium carbide is known for its applications due to extreme hardness and high melting point. In this present work, vanadium carbide nanoparticles have been synthesized in a specially designed stainless steel autoclave by solvothermal route using vanadium pentoxide (V2O5) as precursor along with a hydrocarbon acetone (C3H6O) in the presence of reducing agent magnesium (Mg). The optimization of reaction time was studied at constant temperature of 800oC. The product powder was characterized by X-ray diffraction (XRD), Scanning electron microscopy (SEM), Transmission electron microscope (TEM) and Brunauer – Emmett – Teller (BET) techniques. The results indicate that the product was vanadium carbide having particle size of about 30 nm with high surface area.

scholarly journals Characterization of Orthorhombicα-MoO3Microplates Produced by a Microwave Plasma Process

2012 ◽  
Vol 2012 ◽  
pp. 1-5 ◽  
Author(s):  
Arrak Klinbumrung ◽  
Titipun Thongtem ◽  
Somchai Thongtem
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Microwave Plasma ◽  
Vibration Modes ◽  
X Ray Diffraction ◽  
Plasma Process ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Scanning Electron

Orthorhombic α-MoO3microplates were produced from (NH4)6Mo7O24·4H2O solid powder by a 900 W microwave plasma for 40, 50, and 60 min. Phase, morphologies, and vibration modes were characterized by X-ray diffraction (XRD), selected area electron diffraction (SAED), scanning electron microscopy (SEM), and Raman and Fourier transform infrared (FTIR) spectroscopy. Sixty min processing resulted in the best crystallization of the α-MoO3phase, with photoluminescence (PL) in a wavelength range of 430–440 nm.

scholarly journals Solar photodegradation of a textile azo dye using synthesized ZnO/Bentonite

2016 ◽  
Vol 75 (5) ◽  
pp. 1211-1220 ◽  
Author(s):  
B. Boutra ◽  
M. Trari
Keyword(s):  
Azo Dye ◽  
Total Reflection ◽  
Attenuated Total Reflection ◽  
Impregnation Method ◽  
Order Kinetic ◽  
X Ray Diffraction ◽  
X Ray ◽  
First Order ◽  
Optical Gap ◽  
Optimal Ph

The present work is devoted to the synthesis of a new photocatalyst ZnO (7.5%)/Bentonite prepared by impregnation method and its successful application for the degradation of Solophenyl Red 3BL (SR 3BL) under solar light (∼660 W/m2). The X-ray diffraction (XRD) indicates mixed phases of the nanocomposite catalyst (ZnO/Bentonite), characterized by scanning electron microscopy, X-ray fluorescence and attenuated total reflection. The optical properties confirm the presence of the Wurtzite ZnO phase with an optical gap of 3.27 eV. The catalyst dose (0.25–1 gL−1), pH solution (2.5–11) and initial dye concentration (5–75 mg/L) are optimized. The optimal pH (∼6.7) is close to the natural environment. The photodegradation yield increases with decreasing the SR 3BL concentration. The equilibrium is reached within 160 min and the data are well fitted by the Langmuir-Hinshelwood model; the SR 3BL disappearance obeys to a first-order kinetic with an apparent rate constant of 10−2 mn−1. The best yield of SR 3BL photodegradation (92%) is achieved for a concentration of 5 mg/L and a catalyst dose of 0.75 gL−1 at free pH.

scholarly journals Synthesis and characterization of four new halloysite–TiO2 nanocomposites.

2013 ◽  
Vol 47 (1) ◽  
pp. 407
Author(s):  
D. Papoulis ◽  
S. Komarneni ◽  
D. Toli ◽  
D. Panagiotaras ◽  
S. Bakalis
Keyword(s):  
Sol Gel ◽  
Particle Morphology ◽  
Anatase Tio2 ◽  
Total Reflection ◽  
Attenuated Total Reflection ◽  
Published Data ◽  
X Ray Diffraction ◽  
X Ray ◽  
Tio2 Particles

The synthesis as well as the characterization of small-sized TiO2 particles supported on Halloysite are presented. Hallloysite from Utah, USA as well as from Limnos, island Greece, were used to synthesize two nanocomposites for each halloysite with TiO2 to halloysite weight ratios of 80: 20 and 60:40 and compare with published data of well formed nanocomposites of intermediate proportion (70-30) that were previously studied. All nanocomposites were prepared by deposition of anatase (TiO2) on the halloysite tubes using a sol–gel method under hydrothermal treatment at 180 °C. Phase composition, particle morphology and physical properties of these samples were characterized using X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Attenuated Total Reflection using Fourier Transform Infrared spectroscopy (ATR-FTIR) and N2 surface area analysis by BET. Preparation of all halloysite–TiO2 nanocomposites led to the anticipated good dispersion of anatase particles on halloysite surfaces. ATR-FTIR results revealed the formation of hydrogen bonding between anatase and the outer surfaces of halloysite tubes. All halloysite-TiO2 nanocomposites largely showed interparticle mesopores of about 5.7nm and high SSAs.

Sign in / Sign up

Export Citation Format

Share Document