Tapping the Memory in Archaeological Materials

1988 ◽  
Vol 123 ◽  
Author(s):  
Michael R. Notis ◽  
Charles E. Lyman ◽  
Heidi Moyer ◽  
Christopher Cowen
Keyword(s):  
Materials Science ◽  
Time Frame ◽  
Conservation Science ◽  
Museum Management ◽  
Scientific Approach ◽  
Archaeological Materials ◽  
The Relationship ◽  
Non Destructive ◽  
Management And Conservation

In the areas of archaeology, archaeometry, museum management and conservation science conflict often exists between the desire to preserve, and the desire to understand an artifact. This conflict exists because much laboratory analysis can be destructive. However, conservation can best be done when the materials and techniques that were used for making the object originally are understood. Thus there is a constant drive to develop non-destructive and/or microsample analysis procedures that are meaningful in terms of the statistical accuracy of the results and the added understanding that they provide. In addition to the availability of new microanalytical techniques, the scientific approach developed in materials science is of great value to the fields of archaeometry and conservation science. The ‘materials science approach’ involves the determination of structure and chemistry at various levels in the microstructural hierarchy, and includes the relationship between this structure and chemistry and the material's properties. On the other hand, the study of archaeological materials can be of great value to the materials scientist because these objects exist in a time frame not reproduceable in typical laboratory experiments.

scholarly journals Determination of DynamicElastic Properties of Anah Formation, Near Rawa city / Western Iraq Using Ultrasonic Technique

2020 ◽  
pp. 1672-1683
Author(s):  
Salman Z. Khorshid ◽  
Munther D. Al-Awsi ◽  
Emad H. Kadhim
Keyword(s):  
Elastic Properties ◽  
Dynamic Properties ◽  
Ultrasonic Method ◽  
S Wave ◽  
Wave Velocities ◽  
A Value ◽  
Different Depths ◽  
The Relationship ◽  
Non Destructive

The aim of the current  study is to determine the elastic properties  of carbonate rocks using ultrasonic method.  Forty rock samples of  Anah formation  were collected at  different depths from  four wells drilled at the study area . The relationship between wave velocities and elastic properties of rocks was defined. Regression analyses to define these relations were applied. The results indicate that the elastic properties of the rocks show a linear relationship with both P- and S-wave velocities. The best relationship was obtained between both Young's modulus and Shear modulus with Vs in the determination of the coefficient ( R2  ), with values of 0.91 and 0.94,  respectively.  Bulk modulus and  Lame’s constant were  better correlated with Vp than with Vs  in the determination of R2,with values of 0.92 and 0.83, respectively. Poisson’s ratio  showed a good correlation using the ratio of Vp/Vs in the determination of R2, with a value of 0.81. The main output of this  study shows that the ultrasonic method is a useful tool for the prediction of the elastic dynamic properties of sample rocks and that it can be used as an economical , simple and  non- destructive method, especially for engineering purposes.    

Determination of interface width using EELS fine structure changes

1991 ◽  
Vol 49 ◽  
pp. 730-731
Author(s):  
Vinayak P. Dravid ◽  
M.R. Notis ◽  
C.E. Lyman
Keyword(s):  
Fine Structure ◽  
Materials Science ◽  
Input Parameter ◽  
Core Loss ◽  
Directionally Solidified ◽  
Interface Width ◽  
Structure Changes ◽  
Important Input ◽  
Directionally Solidified Eutectics

The concept of interfacial width is often invoked in many materials science phenomena which relate to the structure and properties of internal interfaces. The numerical value of interface width is an important input parameter in diffusion equations, sintering theories as well as in many electronic devices/processes. Most often, however, this value is guessed rather than determined or even estimated. In this paper we present a method of determining the effective structural and electronic- structural width of interphase interfaces using low- and core loss fine structure effects in EELS spectra.The specimens used in the study were directionally solidified eutectics (DSEs) in the system; NiO-ZrO2(CaO), NiO-Y2O3 and MnO-ZrO2(ss). EELS experiments were carried out using a VG HB-501 FE STEM and a Hitachi HF-2000 FE TEM.

The many faces of STEM in materials science

1991 ◽  
Vol 49 ◽  
pp. 440-441
Author(s):  
John Silcox
Keyword(s):  
Materials Science ◽  
Auger Spectroscopy ◽  
Dark Field ◽  
High Tc Superconductors ◽  
High Tc ◽  
Acoustic Environment ◽  
Electromagnetic Vibration ◽  
The Many ◽  
Serial Mode

Determination of the microstructure and microchemistry of small features often provides the insight needed for the understanding of processes in real materials. In many cases, it is not adequate to use microscopy alone. Microdiffraction and microspectroscopic information such as EELS, X-ray microprobe analysis and Auger spectroscopy can all contribute vital parts of the picture. For a number of reasons, dedicated STEM offers considerable promise as a quantitative instrument. In this paper, we review progress towards effective quantitative use of STEM with illustrations drawn from studies of high Tc superconductors, compound semiconductors and metallization of H-terminated silicon.Intrinsically, STEM is a quantitative instrument. Images are acquired directly by detectors in serial mode which is particularly convenient for digital image acquisition, control and display. The VG HB501A at Cornell has been installed in a particularly stable electromagnetic, vibration and acoustic environment. Care has been paid to achieving UHV conditions (i.e., 10-10 Torr). Finally, it has been interfaced with a VAX 3200 work station by Kirkland. This permits, for example, the acquisition of bright field (or energy loss) images and dark field images simultaneously as quantitative arrays in perfect registration.

Thromboplastin Related Differences in the Determination of International Normalised Ratio: A Cause for Concern?

1994 ◽  
Vol 72 (03) ◽  
pp. 426-429 ◽  
Author(s):  
S Kitchen ◽  
I D Walker ◽  
T A L Woods ◽  
F E Preston
Keyword(s):  
Patient Management ◽  
External Quality Assessment ◽  
Oral Anticoagulant Therapy ◽  
Warfarin Dosage ◽  
External Quality ◽  
External Quality Assessment Scheme ◽  
International Normalised Ratio ◽  
The Uk ◽  
The Relationship

SummaryWhen the International Normalised Ratio (INR) is used for control of oral anticoagulant therapy the same result should be obtained irrespective of the laboratory reagent used. However, in the UK National External Quality Assessment Scheme (NEQAS) for Blood Coagulation INRs determined using different reagents have been significantly different.For 18 NEQAS samples Manchester Reagent (MR) was associated with significantly lower INRs than those obtained using Diagen Activated (DA, p = 0.0004) or Instrumentation Laboratory PT-Fib HS (IL, p = 0.0001). Mean INRs for this group were 3.15, 3.61, and 3.65 for MR, DA, and IL respectively. For 61 fresh samples from warfarin-ised patients with INRs of greater than 3.0 the relationship between thromboplastins in respect of INR was similar to that observed for NEQAS data. Thus INRs obtained with MR were significantly lower than with DA or IL (p <0.0001). Mean INRs for this group were 4.01, 4.40, and 4.59 for MR, DA, and IL respectively.We conclude that the differences between INRs measured with the thromboplastins studied here are sufficiently great to influence patient management through warfarin dosage schedules, particularly in the upper therapeutic range of INR. There is clearly a need to address the issues responsible for the observed discrepancies.

Stoichiometric Determination of Graphite Intercalation Compounds Using Rutherford Backscatiering Spectrometry

1983 ◽  
Vol 27 ◽  
Author(s):  
L. Salamanca-Riba ◽  
B.S. Elman ◽  
M.S. Dresselhaus ◽  
T. Venkatesan
Keyword(s):  
Experimental Error ◽  
Rutherford Backscattering Spectrometry ◽  
Rutherford Backscattering ◽  
Intercalation Compounds ◽  
Graphite Intercalation Compounds ◽  
X Ray ◽  
Donor And Acceptor ◽  
Graphite Intercalation ◽  
Non Destructive

ABSTRACTRutherford backscattering spectrometry (RBS) is used to characterize the stoichiometry of graphite intercalation compounds (GIC). Specific application is made to several stages of different donor and acceptor compounds and to commensurate and incommensurate intercalants. A deviation from the theoretical stoichiometry is measured for most of the compounds using this non-destructive method. Within experimental error, the RBS results agree with those obtained from analysis of the (00ℓ) x-ray diffractograms and weight uptake measurements on the same samples.

Modern determinants of endometrium hyperplastic processes pathogenesis

2016 ◽  
pp. 137-142
Author(s):  
V.O. Benyuk ◽  
◽  
V.M. Goncharenko ◽  
T.R. Nykoniuk ◽  
◽  
...  
Keyword(s):  
Conservative Therapy ◽  
Solid Phase ◽  
Research Direction ◽  
Immunohistochemical Method ◽  
Results Of Treatment ◽  
Treatment And Prevention ◽  
Receptor Phenotype ◽  
The Relationship ◽  
Endometrial Proliferation

The objective: to еxplore the relationship between the activity of endometrial proliferation and the state of the local immune response in the uterus in the conditions berprestasi process. Patients and methods. Examined 228 women of reproductive and perimenopausal age with endometrial pathology using ultrasound and then performing hysteroresectoscopy. Determination of the concentrations of the cytokines IL-1, IL-2, IL-6 and TNF was performed by solid phase ELISA. Results. Found a trend that confirms the loss of sensitivity to hormones at the stage of malignancy of the endometrium and can be used as diagnostic determinants in determining the nature of intrauterine pathology and criterion of the effectiveness of conservative therapy. Conclusion. Improving etiopatogenetice approach to the therapy of hyperplastic proce.sses of endometrium with determination of receptor phenotype of the endometrium is a research direction in modern gynecology, which will help to improve the results of treatment and prevention of intrauterine pathology. Key words: endometrial hyperplasia,the receptors for progesterone and estrogen, immunohistochemical method.

Calculating the aerodynamics of vertical axis wind turbines

2012 ◽  
Vol 34 (3) ◽  
pp. 169-184 ◽  
Author(s):  
Hoang Thi Bich Ngoc
Keyword(s):  
Wind Turbine ◽  
Incidence Angle ◽  
Vertical Axis ◽  
Rotor Blades ◽  
Vertical Axis Wind Turbine ◽  
Horizontal Axis Wind Turbine ◽  
Velocity Triangle ◽  
Relationship Of ◽  
The Relationship

Vertical axis wind turbine technology has been applied last years, very long after horizontal axis wind turbine technology. Aerodynamic problems of vertical axis wind machines are discussible. An important problem is the determination of the incidence law in the interaction between wind and rotor blades. The focus of the work is to establish equations of the incidence depending on the blade azimuth, and to solve them. From these results, aerodynamic torques and power can be calculated. The incidence angle is a parameter of velocity triangle, and both the factors depend not only on the blade azimuth but also on the ratio of rotational speed and horizontal speed. The built computational program allows theoretically selecting the relationship of geometric parameters of wind turbine in accordance with requirements on power, wind speed and installation conditions.

Tire Treadwear — A Comprehensive Evaluation of the Factors: Generic Type, Aspect Ratio, Tread Pattern, and Tread Composition Part I: Introduction and Details on the Organization of the Program

1986 ◽  
Vol 14 (4) ◽  
pp. 201-218 ◽  
Author(s):  
A. G. Veith
Keyword(s):  
Aspect Ratio ◽  
Comprehensive Evaluation ◽  
Test Method ◽  
Interactive Effects ◽  
Data Analyses ◽  
Main Effect ◽  
Systematic Determination ◽  
Relationship Of ◽  
The Relationship

Abstract This four-part series of papers addresses the problem of systematic determination of the influence of several tire factors on tire treadwear. Both the main effect of each factor and some of their interactive effects are included. The program was also structured to evaluate the influence of some external-to-tire conditions on the relationship of tire factors to treadwear. Part I describes the experimental design used to evaluate the effects on treadwear of generic tire type, aspect ratio, tread pattern (groove or void level), type of pattern (straight rib or block), and tread compound. Construction procedures and precautions used to obtain a valid and functional test method are included. Two guiding principles to be used in the data analyses of Parts II and III are discussed. These are the fractional groove and void concept, to characterize tread pattern geometry, and a demonstration of the equivalence of wear rate for identical compounds on whole tread or multi-section tread tires.

The Awareness Level of the Safety and Health of the Operational Level

2017 ◽  
Vol 3 (1) ◽  
pp. 42
Author(s):  
Roshanira Che Mohd Noor ◽  
Nur Atiqah Rochin Demong
Keyword(s):  
Health And Safety ◽  
Health Conditions ◽  
Effective Strategies ◽  
Operational Level ◽  
Safety And Health ◽  
Health Factors ◽  
The Cost ◽  
The Relationship ◽  
Awareness Level

Providing a safe and healthy workplace is one of the most effective strategies in for holding down the cost of doing construction business. It was a part of the overall management system to facilitate themanagement of the occupational health and safety risk that are associated with the business of the organization. Factors affected the awareness level inclusive of safety and health conditions, dangerous working area, long wait care and services and lack of emergency communication werethe contributed factors to the awareness level for the operational level. Total of 122 incidents happened at Telekom Malaysia Berhad as compared to year 2015 only 86 cases. Thus, the main objective of this study was to determine the relationship between safety and health factors and the awareness level among operational workers.The determination of this research was to increase the awareness level among the operational level workerswho committing to safety and health environment.

Application of EDS Technique for OSP Film Thickness Measurement

2006 ◽  
Author(s):  
Prong Kongsubto ◽  
Sirarat Kongwudthiti
Keyword(s):  
Thin Film ◽  
Quantitative Analysis ◽  
Joint Strength ◽  
Critical Factor ◽  
Thickness Measurement ◽  
Ic Manufacturing ◽  
And Control ◽  
Film Thickness Measurement ◽  
Non Destructive

Abstract Organic solderability preservatives (OSPs) pad is one of the pad finishing technologies where Cu pad is coated with a thin film of an organic material to protect Cu from oxidation during storage and many processes in IC manufacturing. Thickness of OSP film is a critical factor that we have to consider and control in order to achieve desirable joint strength. Until now, no non-destructive technique has been proposed to measure OSP thickness on substrate. This paper reports about the development of EDS technique for estimating OSP thickness, starting with determination of the EDS parameter followed by establishing the correlation between C/Cu ratio and OSP thickness and, finally, evaluating the accuracy of the EDS technique for OSP thickness measurement. EDS quantitative analysis was proved that it can be utilized for OSP thickness estimation.

Sign in / Sign up

Export Citation Format

Share Document