scholarly journals Fabrication of Electrochemical Electrodes Based on Platinum and \(\text{ZnO}\) Nanofibers for Biosensing Applications

2017 ◽  
Vol 27 (3) ◽  
pp. 221 ◽  
Author(s):  
Dang Thi Thanh Le ◽  
Nguyen Van Hoang ◽  
Nguyen Van Hieu ◽  
Vu Quang Khue ◽  
Tran Quang Huy
Keyword(s):  
Average Length ◽  
Surface Characteristics ◽  
Cyclic Voltammogram ◽  
X Ray Diffraction ◽  
X Ray ◽  
Screen Printed Electrodes ◽  
Pt Electrodes ◽  
Electrospinning Method ◽  
Zno Nanofibers ◽  
Screen Printed

Platinum (Pt) electrodes were designed in imitation of screen-printed electrodes, and prepared by microelectronic techniques. These electrodes were then modified with zinc oxide (ZnO) nanofibers for biosensing applications. ZnO nanofibers with average length \( \sim 20-30\; \mu\) m and diameter \(\sim 150\) nm in hexagonal crystalline structure are prepared using electrospinning method. Their surface characteristics were analyzed by field emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray diffraction. Electrochemical properties of modified Pt electrodes were investigated in comparison with commercial carbon screen-printed electrodes. The results showed that the cyclic voltammogram of modified Pt electrodes was stable, but has much lower resistance compared to that of carbon screen-printed electrodes.

Methanol Sensing Properties of Electrospun SnO2 -ZnO Nanofibers

2011 ◽  
Vol 356-360 ◽  
pp. 565-568
Author(s):  
Shao Hong Wei ◽  
Mei Hua Zhou ◽  
Wei Ping Du
Keyword(s):  
Electron Microscopy ◽  
X Ray Diffraction ◽  
Promoting Effect ◽  
Heterojunction Structure ◽  
X Ray ◽  
Sensing Properties ◽  
Transmission Electron ◽  
Electrospinning Method ◽  
Zno Nanofibers ◽  
Scanning Electron

Pure ZnO and SnO2-ZnO nanofibers were synthesized by electrospinning method and characterized via X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The structure and methanol sensing properties of these fibers were investigated. The results indicate that the 20 wt% SnO2-ZnO sensor exhibits considerable sensitivity, rapid response, and good selectivity against methanol at 200 °C due to the special 1D fibers properties and the promoting effect of SnO2/ZnO heterojunction structure. The methanol sensing mechanism of SnO2-ZnO nanofibers were also discussed.

Method for synthesizing ZnO of different nanostructures by electrospinning and study of their gas sensing properties

2019 ◽  
Vol 33 (25) ◽  
pp. 1950297
Author(s):  
Xiang-Bing Li ◽  
Shu-Yi Ma ◽  
Fu-Rong Li ◽  
Yu-Xiang Zhao ◽  
Xiao-Bin Liu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Gas Sensing ◽  
Component Ratio ◽  
X Ray Diffraction ◽  
X Ray ◽  
Electrospinning Method ◽  
Gas Sensing Properties ◽  
Zno Nanofibers ◽  
Scanning Electron

The properties of nanomaterials usually depend on their microstructures, the same material of different microstructures could be used for various applications. However, most devices could only synthesize a single microstructure, so it is meaningful that the different microstructures were synthesized by one method. In our study, electrospinning was applied to fabricate ZnO nanofibers and nanoparticles. In this approach, Zn(Ac)/PVP composite fibers of different component ratio were synthesized by electrospinning method which was subsequently calcined and formed ZnO nanofibers and nanoparticles. The microstructure, chemical composition and gas sensing were investigated with scanning electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy and WS-60A gas sensing measurement system. The synthesis mechanisms of ZnO nanofibers and nanoparticles were discussed in detail.

Fabrication and optical properties of NiO/ZnO hierarchical nanostructures

2021 ◽  
Vol 15 (1) ◽  
pp. 45-50
Author(s):  
Minh Vuong Nguyen ◽  
◽  
Ngoc Khoa Truong Nguyen ◽  
Keyword(s):  
Open Space ◽  
Visible Region ◽  
Hexagonal Structure ◽  
Nio Nanoparticles ◽  
X Ray Diffraction ◽  
Energy Dispersion Spectroscopy ◽  
Hierarchical Nanostructures ◽  
X Ray ◽  
Electrospinning Method ◽  
Zno Nanofibers

NiO/ZnO hierarchical nanostructures were synthesized by a combination of electrospinning, hydrothermal and ultraviolet (UV)-assisted deposition. Initially, ZnO nanofibers were synthesized by electrospinning method following thermal oxidation. Subsequently, ZnO hierarchical nanostructures were synthesized by hydrothermal method using ZnO nanofibers as templates. Finally, NiO nanoparticles were deposited on ZnO surface by UV-assisted deposition method. Morphology and characteristics of the material were determined by scanning electron microscopy (SEM), energy dispersion spectroscopy (EDS), X-ray diffraction (XRD), X-ray photoelectron spectrum (XPS) and photoluminescence spectrum (PL). The results showed that the NiO/ZnO hierarchical nanostructures with high open space were obtained. NiO/ZnO crystals showed hexagonal structure of ZnO without phase formation of NiO. PL spectra of the NiO/ZnO material showed emission peaks shift towards longer wavelengths in the visible region with increasing the content of NiO nanoparticles.

scholarly journals On-chip ZnO nanofibers prepared by electrospinning method for NO2 gas detection

2018 ◽  
Vol 27 (4) ◽  
pp. 317 ◽  
Author(s):  
Van Hoang Nguyen ◽  
Van Dung Nguyen ◽  
Quang Dat Do ◽  
Thi Minh Nguyet Quan ◽  
Manh Hung Chu ◽  
...  
Keyword(s):  
Gas Sensing ◽  
Hexagonal Wurtzite Structure ◽  
X Ray Diffraction ◽  
Electrospinning Technique ◽  
X Ray ◽  
Electrospinning Method ◽  
Resistance Modulation ◽  
Zno Nanofibers ◽  
On Chip ◽  
Gas Response

In the present study, on-chip ZnO nanofibers were fabricated by means of the electrospinning technique followed by a calcination process at 600 oC towards the gas sensor application. The morphology, composition, and crystalline structure of the as-spun and annealed ZnO nanofibers were investigated by field emission scanning electron microscopy (FESEM), energy dispersive X-ray (EDX), and X-ray diffraction (XRD), respectively. The findings show that spider-net like ZnO nanofibers with a diameter of 60 – 100 nm were successfully synthesized without any incorporation of impurities into the nanofibers. The FESEM images also reveal that each nanofiber is composed of many nanograins. The combination of experimental and calculated X-ray diffraction data indicate that ZnO nanofibers were crystallized in hexagonal wurtzite structure. For the gas sensing device application, the ZnO nanofibers-based sensors were tested with the nitrogen dioxide gas in the temperature range of 200 oC to 350 oC and concentrations from 2.5 ppm to 10 ppm. The sensing property results indicate that at the optimal working temperature of 300 oC, the ZnO nanofibers-based sensors exhibited a maximum response of 30 and 166 times on exposure of 2.5 and 10 ppm NO2 gas, respectively. The presence of nanograins within nanofibers, which results in further intensification of the resistance modulation, is responsible for such high gas response.

Photocatalytic activity of TiO2 synthesized by anodization and anodic spark deposition

MRS Advances ◽  
2020 ◽  
Vol 5 (61) ◽  
pp. 3141-3152
Author(s):  
Alma C. Chávez-Mejía ◽  
Génesis Villegas-Suárez ◽  
Paloma I. Zaragoza-Sánchez ◽  
Rafael Magaña-López ◽  
Julio C. Morales-Mejía ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Surface Characteristics ◽  
Amorphous Solids ◽  
X Ray Diffraction ◽  
X Ray ◽  
Catalytic Activities ◽  
Anodic Spark Oxidation ◽  
Porous Surfaces ◽  
Scanning Electron

AbstractSeveral photocatalysts, based on titanium dioxide, were synthesized by spark anodization techniques and anodic spark oxidation. Photocatalytic activity was determined by methylene blue oxidation and the catalytic activities of the catalysts were evaluated after 70 hours of reaction. Scanning Electron Microscopy and X Ray Diffraction analysis were used to characterize the catalysts. The photocatalyst prepared with a solution of sulfuric acid and 100 V presented the best performance in terms of oxidation of the dye (62%). The electric potential during the synthesis (10 V, low potential; 100 V, high potential) affected the surface characteristics: under low potential, catalyst presented smooth and homogeneous surfaces with spots (high TiO2 concentration) of amorphous solids; under low potential, catalyst presented porous surfaces with crystalline solids homogeneously distributed.

Eine elektrochemische und strukturelle Studie an den Eisensilylamiden Fe[N(SiMe3)2]2 und Fe[N(SiMe3)2]3 / An Electrochemical and Structural Study of the Iron Silylamides Fe[N(SiMe3)2]2 and Fe[N(SiMe3)2]3

2012 ◽  
Vol 67 (6) ◽  
pp. 549-556 ◽  
Author(s):  
Günter Margraf ◽  
Frauke Schödel ◽  
Inge Sänger ◽  
Michael Bolte ◽  
Matthias Wagner ◽  
...  
Keyword(s):  
Cyclic Voltammogram ◽  
X Ray Diffraction ◽  
Amido Complexes ◽  
X Ray ◽  
Redox Transition ◽  
Transfer Processes ◽  
Irreversible Oxidation ◽  
Reaction Solution ◽  
Reversible Redox ◽  
Electron Transfer Processes

The bis(trimethyl)silylamido complex Na(THF){Fe[N(SiMe3)2]3} and the disilane tBu3SiSitBu3 were obtained from the reaction of Fe[N(SiMe3)2]3 with the sodium silanide Na(THF)2[SitBu3] in a mixture of benzene and THF. Single crystals of Na(THF){Fe[N(SiMe3)2]3} suitable for X-ray diffraction were grown from the reaction solution at ambient temperature (orthorhombic, C2221, Z = 4). The solid-state structure features a contact-ion pair with two short N-Na contacts. The THF adducts {M(THF)2[N(SiMe3)2]2} reacted with 2,2´-bipyridine to give the corresponding complexes {M(2,2´bipy)[N(SiMe3)2]2} (M= Mn; Fe). Their structures (M= Fe: orthorhombic, Pca21, Z = 8; M = Mn: orthorhombic, Pbca, Z = 8) feature monomeric units. The cyclic voltammogram of Fe[N(SiMe3)2]3 revealed a reversible redox transition with the potential of -0;523 V (E½), which was assigned to the Fe(III)[N(SiMe3)2]3 → Fe(II)[N(SiMe3)2]-3 redox transition, whereas the compounds {Fe(THF)2[N(SiMe3)2]2} (Eox = -0;379 V) and {Fe(2,2´bipy)[N(SiMe3)2]2} (Eox = -0;436 V) featured irreversible oxidation waves. The related manganese bis(trimethylsilyl)amido complexes {Mn(THF)2[N(SiMe3)2]2} (Eox = -0;458 V) and {Mn(2,2´bipy)[N(SiMe3)2]2} (Eox = -0513 V) also underwent irreversibile electron transfer processes.

scholarly journals Development and Characterization of Biocompatible Membranes from Natural Chitosan and Gelatin for Pervaporative Separation of Water–Isopropanol Mixture

Polymers ◽  
2021 ◽  
Vol 13 (17) ◽  
pp. 2868
Author(s):  
Akshay S. Kulkarni ◽  
Ashok M. Sajjan ◽  
T. M. Yunus Khan ◽  
Irfan Anjum Badruddin ◽  
Sarfaraz Kamangar ◽  
...  
Keyword(s):  
Surface Characteristics ◽  
Permeation Flux ◽  
X Ray Diffraction ◽  
Natural Polymers ◽  
X Ray ◽  
Efficient Separation ◽  
Differential Scanning Colorimetry ◽  
Index Value ◽  
Pervaporation Separation

Natural polymers have attracted a lot of interest in researchers of late as they are environmentally friendly, biocompatible, and possess excellent characters. Membranes forming natural polymers have provided a whole new dimension to the separation technology. In this work, chitosan-gelatin blend membranes were fabricated using chitosan as the base and varying the amount of gelatin. Transport, mechanical, and surface characteristics of the fabricated membranes were examined in detail by means of the characterizing techniques such as Fourier transform infrared spectroscopy, differential scanning colorimetry, wide angle X-ray diffraction, scanning electron microscope, and thermogravimetric analysis. In order to analyze the water affinity of the developed blend chitosan-gelatin membranes, the percentage degree of swelling was examined. Out of the fabricated membranes, the membrane loaded with 15 mass% of gelatin exhibited the better pervaporation performance with a pervaporation separation index value of 266 at 30 °C for the solution containing 10% in terms of the mass of water, which is the highest among the contemporary membranes. All the fabricated membranes were stable during the pervaporation experiments, and permeation flux of water for the fabricated membranes was dominant in the overall total permeation flux, signifying that the developed membranes could be chosen for efficient separation of water–isopropanol mixture on a larger scale.

Detection of accumulated continuously ethanol concentration by ZnO–SnO2 composite nanorods sensor

2021 ◽  
pp. 2150395
Author(s):  
Xiang-Bing Li ◽  
Da-Qian Mo ◽  
Xiao-Yan Niu ◽  
Qian-Qian Zhang ◽  
Shu-Yi Ma ◽  
...  
Keyword(s):  
Recovery Time ◽  
Ethanol Concentration ◽  
Physical Adsorption ◽  
X Ray Diffraction ◽  
Gas Sensitivity ◽  
X Ray ◽  
Atomic Force ◽  
Electrospinning Method ◽  
Response And Recovery ◽  
Composite Nanorods

ZnO–SnO2 composite nanorods with rough surfaces were synthesized via a coaxially nested needle electrospinning method. The morphology and nanostructure were characterized by scanning electron microscopy, atomic force microscope, EDS mapping, nitrogen physical adsorption, and X-ray diffraction. The synthesis mechanisms of ZnO–SnO2 nanorods were discussed, which combined the gas sensitivity advantages of different materials. ZnO–SnO2 nanorods sensor with good ethanol gas sensitivity achieved accurate measurement of continuous ethanol concentration. The sensor exhibited good selectivity to ethanol in the presence of formaldehyde, methanol, acetone, acetic acid, benzene, and xylene at 290[Formula: see text]C. The response and recovery time to 100 ppm ethanol were about 13 and 35 s, respectively. The energy band, barrier, charge transfer of ZnO–SnO2 composite material was discussed, and its optimization of gas sensitivity was analyzed in detail.

Effect of Different Solutions on Hydrothermal Treatment of β-Tricalcium Phosphate Scaffold

2017 ◽  
Vol 264 ◽  
pp. 66-69
Author(s):  
Fadilah Darus ◽  
Mariatti Jaafar
Keyword(s):  
Hydrothermal Treatment ◽  
Sodium Hydrogen Carbonate ◽  
Surface Characteristics ◽  
Carbonate Apatite ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
X Ray ◽  
Sodium Hydrogen ◽  
Hydrogen Carbonate ◽  
Before And After

Carbonate apatite would be ideal for bone substitute due to its composition of 4-8% carbonate similar to bone mineral. The purpose of the present study was to produce carbonate apatite scaffold by using hydrothermal treatment of β-TCP scaffold as a precursor. The effect of different solutions on hydrothermal treatment was studied. The microstructure of scaffold before and after hydrothermal were characterized by scanning electron microscopy (SEM). It is observed that surface characteristics are governed by the types of immersion solution. The typical smooth surface of the β-TCP scaffold was observed before hydrothermal. Different morphology was observed after hydrothermal in different solutions. X-Ray Diffraction (XRD) pattern indicates that the peak of apatite with low intensities present after hydrothermal treatment in sodium hydrogen carbonate solution.

Preparation of PCL/PVP/Ag Nanofiber Membranes by Electrospinning Method

2012 ◽  
Vol 268-270 ◽  
pp. 580-583 ◽  
Author(s):  
Yong Tang Jia ◽  
Cui Wu ◽  
Feng Chun Dong ◽  
Gang Huang ◽  
Xian Hua Zeng
Keyword(s):  
Silver Nanoparticles ◽  
Photoelectron Spectroscopy ◽  
Composite Nanofibers ◽  
Average Diameter ◽  
Vinyl Pyrrolidone ◽  
X Ray Diffraction ◽  
X Ray ◽  
Electrospinning Method ◽  
Nanofiber Membranes ◽  
Poly Vinyl Pyrrolidone

The composite nanofiber membranes of poly (ε-caprolactone)/poly(vinyl pyrrolidone) (PCL/PVP) containing silver nanoparticles were prepared by electrospinning method. The morphology of composite nanofibers was characterized by scanning electron microscopy (SEM). The silver nanoparticles on the electrospun fibers were characterized by X-Ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The contact angle and water uptake of PCL/PVP/Ag nanofiber membranes were measured. The SEM photos indicated that the average diameter of the fibers was significantly decreased with the addition of silver nanoparticles. The X-Ray images showed that Ag nanoparticles were distributed on the surface of nanofiber membranes. When the PVP mole ratio was higher than 15%, the nanofiber membranes showed good hydrophilic property. The PCL/PVP/Ag nanofiber membranes could be applied to prepare wound dressing.

Sign in / Sign up

Export Citation Format

Share Document