scholarly journals A stress-strain state analysis of the road transport works foundations on seasonally freezing soils

2020 ◽  
Vol 7 (4) ◽  
Author(s):  
Anatoliy Permikin ◽  
Igor Ovchinnikov ◽  
Anastasiya Gricuk
Keyword(s):  
Traffic Safety ◽  
Road Transport ◽  
Transport Infrastructure ◽  
Fine Aggregate ◽  
Negative Consequences ◽  
Soil Thickness ◽  
The Road ◽  
Operational Characteristics ◽  
On The Road ◽  
Frost Boil

This article discusses the road transport works foundations when they are located in the seasonally freezing soils zone. Some culvert aqueduct utilized structures were considered and analyzed as an example, in the scope of most common structures on the road network and that also has an insignificant weight. Some constructive solutions disadvantages of these pipes were pointed out. It is noted that the operational characteristics of nonfrost-susceptible soil decrease in the watercourse filtering process and settling small particles and reported the dependence of the relative soil frost boil on the fine aggregate percentage. As an example of the frost boil forces influence, a typical culvert aqueduct design is considered. The calculation of axial and tangential heaving forces that affect the crown of tube is performed, assuming that the bedding soil is contaminated. Based on the calculation, rise calculated value dependence graphs of the unstressed base on the soil dampness and the heaving soil thickness, and the heaving pressure on the soil dampness are presented here. Due to the insufficient value of the forces holding back against lifting, possible negative consequences of the frost boil impact forces are presented, this affects not only the culvert aqueduct operational characteristics but also the roadbed smoothness and traffic safety. Thus, the need for additional measures to prevent soil swelling under the pipe head is justified. Recommended measures to prevent excessive deformations during frost boil, as well as modern aspects of the development of such technologies, are considered. Conclusions are made about their applicability and feasibility in relation to small artificial structures of transport infrastructure.

scholarly journals USING WEB TECHNOLOGIES TO IMPROVE THE TRANSPORTATION PROCESS

2021 ◽  
Vol 1 (92) ◽  
pp. 7
Author(s):  
Oleg Aleksiyev ◽  
Volodymyr Aleksiev ◽  
M. Matsiy
Keyword(s):  
Traffic Safety ◽  
Rapid Development ◽  
Road Transport ◽  
Transport Processes ◽  
Transport Infrastructure ◽  
Transport Systems ◽  
Negative Consequences ◽  
Knowledge And Skills ◽  
Transport Services ◽  
Virtual Management

Problem. Due to the constant information development of society and its industrial component, new transport systems and machines have reached a high level of information excellence. Accordingly, there is a new contradiction between the rapid development of tools and methods of informatization of complex objects and systems, the development of transport telematics (internal for cars and other vehicles and external internal transport control systems) and the heterogeneous nature of existing subsystems and components of the transport complex. Of Ukraine. The problem of resolving this contradiction will allow at all levels of transport infrastructure to improve services to residents of cities and regions, improve transport processes, avoid existing negative consequences: traffic disruptions, unsatisfactory condition of roads, irrational use of funds for repair, operation and equipment of highways. This will help improve traffic safety, improve the quality of transport services, ensure people’s comfort and save cargo. Goal. The goal of the study is to create software and hardware for virtual management, its intellectualization based on the use of virtual logistics of transportation processes, providing road users, tools of virtual management, a kind of virtual logistics of the transport system of the transport portal KhNADU (ICT KhNADU). The purpose of this article is to study the problem of expressing and proving new rules and concepts for providing knowledge and skills to people who want to work in the IT field of transport applications. The sequence of acquiring knowledge and skills of people who have improved their personal professional level in road transport is determined. Methodology. The idea of computer science as system engineering of successful consecutive creation of computer equipment and software of complex systems by combining their computer and software engineering in the field of motor transport is offered. Practical value. The scope of use of the obtained results is road transport road organizations of Ukraine, residents of cities and regions as individuals or legal entities of users of transport services.

scholarly journals FEATURES OF THE STUDY OF THE ENVIRONMENTAL SITUATION AROUND THE OBJECTS OF ROAD TRANSPORT INFRASTRUCTURE

2021 ◽  
Vol 1 (50) ◽  
pp. 170-179
Author(s):  
Rabosh I ◽  
◽  
Khrutba V ◽  
Kobzysta O ◽  
◽  
...  
Keyword(s):  
Motor Vehicle ◽  
Road Transport ◽  
Environmental Safety ◽  
The State ◽  
Transport Infrastructure ◽  
Negative Consequences ◽  
Motor Transport ◽  
The Road ◽  
Environmental Situation ◽  
The Impact

In recent years, the state of the road transport infrastructure in Ukraine has deteriorated significantly. With the process of urbanization and the expansion of the transport infrastructure, the ecological danger of the functioning of these strategically important objects increases, which requires effective methods of detailed study of the state of environmental components in areas of urban pollution in order to prevent negative consequences. Working with the problematic, using robots, we analyzed the methods to monitor the environmental situation around the road transport infrastructure for the development of recommendations for advancing efficiency. An algorithm for assessing the environmental situation around the objects of motor transport infrastructure is considered, based on monitoring the impact of these objects on the components of the environment and determining the main factors of this influence. The regularities and dependences of the influence of the motor transport infrastructure from the standpoint of environmental safety have been established. The indicators of pollution of the components of the environment in the study areas and methods of their production are analyzed. It has been concluded that a complex combination of chemical research methods with biodication is observable, makes it possible to analyze the effect of vehicles on various components of the environment (atmospheric air, soil and soil solutions, plants, animals, surface waters, etc.) and to establish the level of anthropogenic load. KEY WORDS: MOTOR VEHICLE INFRASTRUCTURE, ENVIRONMENTAL SAFETY, HARMFUL SUBSTANCES, POLLUTION

scholarly journals Assessment of Tire Features for Modeling Vehicle Stability in Case of Vertical Road Excitation

2021 ◽  
Vol 11 (14) ◽  
pp. 6608
Author(s):  
Vaidas Lukoševičius ◽  
Rolandas Makaras ◽  
Andrius Dargužis
Keyword(s):  
Traffic Safety ◽  
Road Transport ◽  
Vehicle Stability ◽  
The Road ◽  
Directional Stability ◽  
Road Pavement ◽  
Road Excitation ◽  
On The Road ◽  
Materials Used ◽  
The Impact

Two trends could be observed in the evolution of road transport. First, with the traffic becoming increasingly intensive, the motor road infrastructure is developed; more advanced, greater quality, and more durable materials are used; and pavement laying and repair techniques are improved continuously. The continued growth in the number of vehicles on the road is accompanied by the ongoing improvement of the vehicle design with the view towards greater vehicle controllability as the key traffic safety factor. The change has covered a series of vehicle systems. The tire structure and materials used are subject to continuous improvements in order to provide the maximum possible grip with the road pavement. New solutions in the improvement of the suspension and driving systems are explored. Nonetheless, inevitable controversies have been encountered, primarily, in the efforts to combine riding comfort and vehicle controllability. Practice shows that these systems perform to a satisfactory degree only on good quality roads, as they have been designed specifically for the latter. This could be the cause of the more complicated car control and accidents on the lower-quality roads. Road ruts and local unevenness that impair car stability and traffic safety are not avoided even on the trunk roads. In this work, we investigated the conditions for directional stability, the influence of road and vehicle parameters on the directional stability of the vehicle, and developed recommendations for the road and vehicle control systems to combine to ensure traffic safety. We have developed a refined dynamic model of vehicle stability that evaluates the influence of tire tread and suspensions. The obtained results allow a more accurate assessment of the impact of the road roughness and vehicle suspension and body movements on vehicle stability and the development of recommendations for the safe movement down the road of known characteristics.

scholarly journals A Model for the Evaluation of Brazilian Road Transport: A Sustainable Perspective

2018 ◽  
Vol 2018 ◽  
pp. 1-12 ◽  
Author(s):  
Mariana Gonçalves de Carvalho Wolff ◽  
Marco Antonio Farah Caldas
Keyword(s):  
Evaluation Model ◽  
Road Transport ◽  
Single Equation ◽  
Transport Infrastructure ◽  
Air Emissions ◽  
The Road ◽  
Road Projects ◽  
On The Road ◽  
Environmental Concepts ◽  
Made In

Freight transportation in Brazil is heavily based on the road mode bringing heavy dependence of this mode to the country and some consequences such as high operating costs and high air emissions. For these reasons, it was considered the necessity of evaluating new investments made in this mode from a sustainable perspective, taking into account not only economic but also social and environmental concepts. Towards this purpose, the study develops an evaluation model of road transport infrastructure, the TIM, which will help decision making in situations of choice between different alternatives of road projects. The model includes ten variables that count from the initial investment in the road to air emissions of carbon dioxide. All are monetarized individually and then consolidated into a single equation. The result of applying the model is innovative when considering the three spheres of sustainability to evaluate future road transport projects and rank them.

scholarly journals A Theoretical Model with Which to Safely Optimize the Configuration of Hydraulic Suspension of Modular Trailers in Special Road Transport

2020 ◽  
Vol 11 (1) ◽  
pp. 305
Author(s):  
Rubén Escribano-García ◽  
Marina Corral-Bobadilla ◽  
Fátima Somovilla-Gómez ◽  
Rubén Lostado-Lorza ◽  
Ash Ahmed
Keyword(s):  
Theoretical Model ◽  
Wind Turbine ◽  
Optimization Algorithm ◽  
Hydraulic Cylinder ◽  
Road Transport ◽  
Automatic Testing ◽  
Transport Systems ◽  
The Road ◽  
Proposed Model ◽  
On The Road

The dimensions and weight of machines, structures, and components that need to be transported safely by road are growing constantly. One of the safest and most widely used transport systems on the road today due to their versatility and configuration are modular trailers. These trailers have hydraulic pendulum axles that are that are attached in pairs to the rigid platform above. In turn, these modular trailers are subject to limitations on the load that each axle carries, the tipping angle, and the oil pressure of the suspension system in order to guarantee safe transport by road. Optimizing the configuration of these modular trailers accurately and safely is a complex task. Factors to be considered include the load’s characteristics, the trailer’s mechanical properties, and road route conditions including the road’s slope and camber, precipitation and direction, and force of the wind. This paper presents a theoretical model that can be used for the optimal configuration of hydraulic cylinder suspension of special transport by road using modular trailers. It considers the previously mentioned factors and guarantees the safe stability of road transport. The proposed model was validated experimentally by placing a nacelle wind turbine at different points within a modular trailer. The weight of the wind turbine was 42,500 kg and its dimensions were 5133 × 2650 × 2975 mm. Once the proposed model was validated, an optimization algorithm was employed to find the optimal center of gravity for load, number of trailers, number of axles, oil pressures, and hydraulic configuration. The optimization algorithm was based on the iterative and automatic testing of the proposed model for different positions on the trailer and different hydraulic configurations. The optimization algorithm was tested with a cylindrical tank that weighed 108,500 kg and had dimensions of 19,500 × 3200 × 2500 mm. The results showed that the proposed model and optimization algorithm could safely optimize the configuration of the hydraulic suspension of modular trailers in special road transport, increase the accuracy and reliability of the calculation of the load configuration, save time, simplify the calculation process, and be easily implemented.

scholarly journals The Effects of ITS Application in Speed Management on State Road From Mali Pozarevac to Kragujevac

2016 ◽  
Vol 1 (1) ◽  
Author(s):  
Tomislav Petrović ◽  
Miloš Milosavljević ◽  
Milan Božović ◽  
Danislav Drašković ◽  
Milija Radović
Keyword(s):  
Traffic Safety ◽  
Traffic Management ◽  
Quality Data ◽  
Transport Systems ◽  
Speed Limit ◽  
Accident Risk ◽  
The Road ◽  
Road Users ◽  
Speed Management ◽  
On The Road

The application of intelligent transport systems (hereinafter ITSs) on roads enables continuous monitoring of road users during a whole year with the aim to collect good-quality data based on which the more complex analyses could be done, such as monitoring of certain traffic safety indicators. Automatic traffic counters are one of the most commonly implemented ITSs for collecting traffic flow parameters that are relevant for traffic management on state roads in Republic of Serbia. This paper presents one of the possible ways to collect, analyze and present data on road users’ speeds using automatic traffic counters, where certain traffic safety indicators are analyzed in terms of road users’ compliance with the speed limit on the road section from Mali Pozarevac to Kragujevac. Based on the analyses of data downloaded from automatic traffic counters, it is observed that an extremely high percentage of vehicles drive at speed higher than the speed limit, indicating clearly to higher traffic accident risk, as well as to the need for a tendency to implement speed management on roads using ITS in the forthcoming period.

scholarly journals Measures to optimize traffic and the environment. Calculations of environmental safety on a given section of the Rostov-on-Don road network

2020 ◽  
pp. 68-77
Author(s):  
R. S. Durov ◽  
◽  
E. V. Varnakova ◽  
K. O. Kobzev ◽  
◽  
...  
Keyword(s):  
Road Network ◽  
Road Transport ◽  
Environmental Safety ◽  
Environmental Indicators ◽  
Nox Emissions ◽  
The Road ◽  
Before And After ◽  
Reduce Emissions ◽  
On The Road ◽  
State Of The Environment

Introduction. One of the most pressing socio-economic problems is the state of the environment, which affects the living conditions of many people. The article deals with the problem areas of the intersection of 20-ya Liniya street – Sholokhov Avenue in Rostov-on-Don. Problem Statement. The purpose of this paper is to improve environmental safety at the intersection of 20-ya Liniya street – Sholokhov Avenue in Rostov-on-Don by reducing emissions from road transport through the proposed measures to reorganize traffic on this section of the road network. Theoretical Part. The article provides an assessment of environmental and road safety on the road network section before applying the proposed measures. The measures are listed and justified that would help improve the conditions for road transport at the selected intersection and reduce emissions from road transport, which would improve environmental safety. The calculation of environmental indicators was made after the proposed measures to reduce NOx emissions by cars. Conclusion. The article analyzes the environmental indicators before and after the events, and then compares them. Based on the analysis and calculations, it is determined how much the proposed measures to optimize traffic will help reduce NOx emissions by cars.

scholarly journals Problems of transporting heavy containers by road transport in Russian Federation

2020 ◽  
Vol 2020 (1) ◽  
pp. 13-23
Author(s):  
Boris Sergeevich Petrov ◽  
Alexander Valentinovich Galin
Keyword(s):  
Russian Federation ◽  
Road Transport ◽  
Correct Choice ◽  
Total Weight ◽  
Transport Infrastructure ◽  
Maximum Mass ◽  
The Road ◽  
The Russian Federation ◽  
Axle Loads ◽  
Freight Vehicles

The article considers the problem of heavy cargo transporting as an integral part of functioning of industry in the country. The transportation of such types of cargo is regulated by the legislation related to the national transport infrastructure. There have been considered the ways of transporting heavy sea containers by road transport in the Russian Federation. Definitions of the divisible and indivisible cargo, the maximum mass of the road train have been given, the indicators of the maximum permissible mass of the vehicle and the axle load on the roads of Russia, approved by legislative acts of the Russian Federation, have been presented. The issues of the correct choice of freight vehicles and compliance with the rules for transportation of heavy cargo, in particular compliance with the permissible total weight and axle loads, have been considered. There has been proposed the method for calculating axle loads and the solution to the problem of redistributing axle loads by moving the seat of the towing vehicle, transporting a heavy sea container by train being used as the example. The obtained values make it possible to estimate the possibility of carrying heavy cargo without violating standards approved by the legislation of Russia

scholarly journals Exploring the Informal Communication of Driver-to-Driver on Roads: A Case Study of Durban City, South Africa.

2021 ◽  
Vol 67 (4) ◽  
pp. 1-8
Author(s):  
Jacob Adedayo Adedeji ◽  
Xoliswa Feikie
Keyword(s):  
South African ◽  
Traffic Safety ◽  
Road Traffic ◽  
Structured Interview ◽  
Road User ◽  
Novice Drivers ◽  
The Road ◽  
Road Users ◽  
Hand Signal ◽  
On The Road

Road traffic fatality is rated as one of the ten causes of death in the world and with various preventive measures on a global level, this prediction is only placed on flat terrain and didn’t reduce. Nevertheless, road users’ communication is an essential key to traffic safety. This communication, be it formal or informal between the road users is an important factor for smooth traffic flow and safety. Communication language on roads can be categorized into; formal device-based signal (formal signal), formal hand signal (formal signal), informal device-based signal (informal signal), and informal gesture-based signal (everyday signal). However, if the intent of the message conveys is not properly understood by the other road user, mistakes and errors may set in. Overall, the formal signal is based on explicit learning which occurs during the driving training and the license testing process and the informal, implicit learning occur during the actual driving process on the road unintentionally. Furthermore, since the informal signal is not a prerequisite to driving or taught in driving schools, novice drivers are clueless and thus, might have contributed to errors and mistakes which leads to traffic fatalities. Therefore, this study seeks to document the informal means of communication between drivers on South African roads. Consequently, a qualitative semi-structured interview questionnaire would be used in the collection of informal signals, which were predominantly used on South African roads from driving instructors and thereafter, a focus group of passengers’ car, commercial and truck drivers will be used to validate the availability and their understanding of these informal signals using a Likert-type scale for the confidence level. In conclusion, the information gathered from this study will help improve road safety and understanding of road users especially drivers on the necessity of communication and possible adaptation for other developing countries.

scholarly journals STUDI KERUSAKAN JALAN DITINJAU DARI FAKTOR SETEMPAT (STUDI KASUS RUAS JALAN BLANGKEJEREN – LAWE AUNAN)

2018 ◽  
Vol 1 (3) ◽  
pp. 667-678
Author(s):  
Mulyadi Mulyadi ◽  
Muhammad Isya ◽  
Sofyan M. Saleh
Keyword(s):  
Traffic Safety ◽  
Condition Index ◽  
Road Surface ◽  
Primary Data ◽  
Soil Conditions ◽  
Pavement Condition ◽  
Local Factors ◽  
The Road ◽  
Pavement Condition Index ◽  
On The Road

Abstract: Blangkejeren - Lawe Aunan road conditions overall is on the slopes of the mountains which is strongly influenced by local environmental factors such as drainage, topography, soil conditions, material conditions and vehicle load conditions across the road. It should be noted in order to avoid a decrease in the road quality due to road surface damage that can affect the traffic safety, comfort and smoothness.. Therefore, it is necessary to study the evaluation of the condition of the damaged road surface and the local factors that affect the damage in order to avoid a decrease in the roads quality. This study took place on Blangkejeren - Lawe Aunan roads started from Sta. 529 + 700 - Sta. 535 + 206. Generally, the condition of roads in this segment were found damage that disturb the comfort, smoothness and safety of the roads users. In this study, the primary data obtained by actual surveys in the form of data field length, width, area, and depth of each type of damage as well as local factors that lead to such damage. Actual field surveys conducted along the 5.506 km, with the distance interval of each segment is 100 m. The secondary data obtained from the relevant institutions and other materials related to this research. This study analyzed the PCI method (Pavement Condition Index) to obtain the level of damage in order to know how to handle, while for the identification of the damage done by observation factors descriptively appropriate observation in the field such as the number of damage points. The results of this study found that the type of damage caused to roads is damage to the cover layer, a hole, and curly. This type of damage that commonly occurs on the road Blangkejeren - Lawe Aunan is damage to the edges with a percentage of 87.30%. The local factors that greatly affect drainage on the percentage of damage is 62.00%. PCI average value is 13.47 which indicates a very bad condition (very poor) and requires maintenance or improvement of reconstruction.Abstrak: Kondisi jalan Blangkejeren – Lawe Aunan secara keseluruhan berada di lereng pegunungan sangat dipengaruhi oleh faktor lingkungan setempat seperti drainase, topografi, kondisi tanah, kondisi material dan kondisi beban kendaraan yang melintasi jalan tersebut. Hal ini perlu diperhatikan agar tidak terjadi penurunan kualitas jalan akibat kerusakan permukaan jalan sehingga dapat mempengaruhi keamanan, kenyamanan, dan kelancaran dalam berlalu lintas. Oleh karena itu, perlu dilakukan penelitian evaluasi terhadap kondisi permukaan jalan yang mengalami kerusakan serta faktor setempat yang mempengaruhi kerusakan tersebut agar tidak terjadi penurunan kualitas jalan. Penelitian ini mengambil lokasi di ruas jalan Blangkejeren – Lawe Aunan yang dimulai dari Sta. 529+700 - Sta. 535+206. Umumnya kondisi ruas jalan pada segmen ini banyak ditemukan kerusakan-kerusakan yang dapat mengganggu kenyamanan, kelancaran, dan keamanan pengguna jalan. Dalam penelitian ini data primer diperoleh dengan melakukan survei aktual lapangan yaitu berupa data panjang, lebar, luasan, dan kedalaman tiap jenis kerusakan serta faktor setempat yang mengakibatkan kerusakan tersebut. Survei aktual lapangan dilakukan sepanjang 5,506 km, dengan jarak interval setiap segmen adalah 100 m. Adapun data sekunder diperoleh dari lembaga terkait dan bahan lainnya yang berhubungan dengan penelitian ini. Penelitian ini dianalisis dengan metode PCI (Pavement Condition Index) untuk mendapatkan tingkat kerusakan agar diketahui cara penanganannya, sedangkan untuk identifikasi faktor kerusakannya dilakukan dengan pengamatan secara diskriptif sesuai hasil pengamatan di lapangan berupa jumlah titik kerusakan. Hasil penelitian ini didapatkan bahwa jenis kerusakan yang terjadi pada ruas jalan adalah kerusakan lapisan penutup, lubang, dan keriting. Jenis kerusakan yang umum terjadi pada ruas jalan Blangkejeren – Lawe Aunan adalah kerusakan tepi dengan persentase 87,30 %. Faktor setempat yang sangat mempengaruhi kerusakan adalah drainase dengan persentase 62,00%. Nilai PCI rata-rata yaitu 13,47 yang menunjukkan kondisi sangat buruk (very poor) dan memerlukan pemeliharaan peningkatan atau rekonstruksi.

Sign in / Sign up

Export Citation Format

Share Document