scholarly journals Recent advances in the study of biocorrosion: an overview

1999 ◽  
Vol 30 (3) ◽  
pp. 117-190 ◽  
Author(s):  
Iwona B. Beech ◽  
Christine C. Gaylarde
Keyword(s):  
Extracellular Polymeric Substances ◽  
Copper Alloys ◽  
Analytical Techniques ◽  
Microbial Consortia ◽  
Force Microscopy ◽  
Sulfate Reducing ◽  
Microbially Influenced Corrosion ◽  
Atomic Force ◽  
Metabolic Activities ◽  
Anodic Reactions

Biocorrosion processes at metal surfaces are associated with microorganisms, or the products of their metabolic activities including enzymes, exopolymers, organic and inorganic acids, as well as volatile compounds such as ammonia or hydrogen sulfide. These can affect cathodic and/or anodic reactions, thus altering electrochemistry at the biofilm/metal interface. Various mechanisms of biocorrosion, reflecting the variety of physiological activities carried out by different types of microorganisms, are identified and recent insights into these mechanisms reviewed. Many modern investigations have centered on the microbially-influenced corrosion of ferrous and copper alloys and particular microorganisms of interest have been the sulfate-reducing bacteria and metal (especially manganese)-depositing bacteria. The importance of microbial consortia and the role of extracellular polymeric substances in biocorrosion are emphasized. The contribution to the study of biocorrosion of modern analytical techniques, such as atomic force microscopy, Auger electron, X-ray photoelectron and Mössbauer spectroscopy, attenuated total reflectance Fourier transform infrared spectroscopy and microsensors, is discussed.

scholarly journals Extracellular Vesicles Analysis in the COVID-19 Era: Insights on Serum Inactivation Protocols towards Downstream Isolation and Analysis

Cells ◽  
2021 ◽  
Vol 10 (3) ◽  
pp. 544
Author(s):  
Roberto Frigerio ◽  
Angelo Musicò ◽  
Marco Brucale ◽  
Andrea Ridolfi ◽  
Silvia Galbiati ◽  
...  
Keyword(s):  
Extracellular Vesicles ◽  
Analytical Techniques ◽  
Heat Inactivation ◽  
Force Microscopy ◽  
Atomic Force ◽  
Droplet Pcr ◽  
Detergent Treatment ◽  
Routine Procedures ◽  
The Impact ◽  
Mirna Content

Since the outbreak of the COVID-19 crisis, the handling of biological samples from confirmed or suspected SARS-CoV-2-positive individuals demanded the use of inactivation protocols to ensure laboratory operators’ safety. While not standardized, these practices can be roughly divided into two categories, namely heat inactivation and solvent-detergent treatments. These routine procedures should also apply to samples intended for Extracellular Vesicles (EVs) analysis. Assessing the impact of virus-inactivating pre-treatments is therefore of pivotal importance, given the well-known variability introduced by different pre-analytical steps on downstream EVs isolation and analysis. Arguably, shared guidelines on inactivation protocols tailored to best address EVs-specific requirements will be needed among the analytical community, yet deep investigations in this direction have not yet been reported. We here provide insights into SARS-CoV-2 inactivation practices to be adopted prior to serum EVs analysis by comparing solvent/detergent treatment vs. heat inactivation. Our analysis entails the evaluation of EVs recovery and purity along with biochemical, biophysical and biomolecular profiling by means of a set of complementary analytical techniques: Nanoparticle Tracking Analysis, Western Blotting, Atomic Force Microscopy, miRNA content (digital droplet PCR) and tetraspanin assessment by microarrays. Our data suggest an increase in ultracentrifugation (UC) recovery following heat treatment; however, it is accompanied by a marked enrichment in EVs-associated contaminants. On the other hand, solvent/detergent treatment is promising for small EVs (<150 nm range), yet a depletion of larger vesicular entities was detected. This work represents a first step towards the identification of optimal serum inactivation protocols targeted to EVs analysis.

scholarly journals Synthesis of Metarhizium anisopliae–Chitosan Nanoparticles and Their Pathogenicity against Plutella xylostella (Linnaeus)

2021 ◽  
Vol 10 (1) ◽  
pp. 1
Author(s):  
Jianhui Wu ◽  
Cailian Du ◽  
Jieming Zhang ◽  
Bo Yang ◽  
Andrew G. S. Cuthbertson ◽  
...  
Keyword(s):  
Plutella Xylostella ◽  
Metarhizium Anisopliae ◽  
Chitosan Nanoparticles ◽  
Analytical Techniques ◽  
X Ray ◽  
Synthesis Of Nanoparticles ◽  
Force Microscopy ◽  
Atomic Force ◽  
Afm Analysis

Nanotechnology is increasingly being used in areas of pesticide production and pest management. This study reports the isolation and virulence of a new Metarhizium anisopliae isolate SM036, along with the synthesis and characterization of M. anisopliae–chitosan nanoparticles followed by studies on the efficacy of nanoparticles against Plutella xylostella. The newly identified strain proved pathogenic to P. xylostella under laboratory conditions. The characterization of M. anisopliae–chitosan nanoparticles through different analytical techniques showed the successful synthesis of nanoparticles. SEM and HRTEM images confirmed the synthesis of spherical-shaped nanoparticles; X-ray diffractogram showed strong peaks between 2θ values of 16–30°; and atomic force microscopy (AFM) analysis revealed a particle size of 75.83 nm for M. anisopliae–chitosan nanoparticles, respectively. The bioassay studies demonstrated that different concentrations of M. anisopliae–chitosan nanoparticles were highly effective against second instar P. xylostella under laboratory and semi-field conditions. These findings suggest that M. anisopliae–chitosan nanoparticles can potentially be used in biorational P. xylostella management programs.

scholarly journals Natural and Activated Allophane Catalytic Activity Based on the Microactivity Test in Astm Norm 3907/D3907M-2019

2020 ◽  
Vol 10 (9) ◽  
pp. 3035
Author(s):  
Edward Henry Jiménez Calderón ◽  
Ana Emperatriz Paucar Tipantuña ◽  
Paulina Fernanda Herrera Mullo ◽  
Daniel Alejandro Hidalgo Cháfuel ◽  
Washington Ruiz ◽  
...  
Keyword(s):  
Analytical Techniques ◽  
Bet Surface Area ◽  
Navier Stokes ◽  
Maximum Temperature ◽  
X Ray Diffraction ◽  
X Ray ◽  
Force Microscopy ◽  
Catalytic Activation ◽  
Atomic Force ◽  
Activating Agent

The optimal conditions of the catalytic activation of allophane were evaluated for possible use as a catalyst within a fluidized bed catalytic cracking unit (FCC). The physicochemical properties of natural allophane and activated allophane were studied by using an alkaline activating agent, followed by a hydrothermal treatment. For the characterization, analytical techniques were used: Fourier transform infrared spectroscopy, particle size, (BET) surface area, thermogravimetry (TGA), X-ray diffraction (XRD), chemisorption, X-ray fluorescence (XRF), atomic force microscopy (AFM), and chromatography. The catalytic evaluation was determined by the (MAT) micro activity test equipment constructed according to ASTM D-3907/D3907M-2019. In addition, the Navier–Stokes 3D equations (nonlinear partial derivatives) were studied, which allow studying molecular dynamics contributing substantively to chemical kinetics describing the process of decomposition of crude oil in thermal cracking, determining the maximum temperature at which it retains its properties through the action of heat.

Microbially influenced corrosion visualized by atomic force microscopy

1998 ◽  
Vol 66 (7) ◽  
pp. S639-S642 ◽  
Author(s):  
J. Telegdi ◽  
Z. Keresztes ◽  
G. Pálinkás ◽  
E. Kálmán ◽  
W. Sand
Keyword(s):  
Atomic Force Microscopy ◽  
Force Microscopy ◽  
Microbially Influenced Corrosion ◽  
Atomic Force

Interaction of salicylic acid with zirconium diphosphate and its reactivity toward uranium (VI)

2018 ◽  
Vol 106 (4) ◽  
pp. 291-300
Author(s):  
Nidia García-González ◽  
Eduardo Ordoñez-Regil ◽  
María Guadalupe Almazán-Torres ◽  
Eric Simoni
Keyword(s):  
Salicylic Acid ◽  
Photoelectron Spectroscopy ◽  
Room Temperature ◽  
Analytical Techniques ◽  
Batch Method ◽  
Sorption Data ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force ◽  
Surface Modified

AbstractThe interaction of salicylic acid with zirconium diphosphate surface and its reactivity toward uranium (VI) was investigated. The interaction of salicylic acid with zirconium diphosphate was firstly studied using several analytical techniques including atomic force microscopy, scanning electron microscopy and X-ray photoelectron spectroscopy. The sorption of uranium (VI) onto surface-modified zirconium diphosphate was evaluated by the classical batch method at room temperature. This study showed that the uranium (VI) sorption onto zirconium diphosphate is influenced by the presence of salicylic acid. A fluorescence spectroscopy study revealed the presence of a uranyl specie onto the modified solid surface. The spectroscopy results were then used to restrain the modeling of experimental sorption data, which are interpreted in terms of a constant capacitance model using the FITEQL code. The results indicated that interaction between the uranium (VI) and the surface of zirconium diphosphate modified with salicylic acid leads to the formation of a ternary surface complex.

scholarly journals ToF-SIMS and AFM Characterization of Brown Cosmetic Contact Lenses: From Structural Analysis to the Identification of Pigments

2020 ◽  
Vol 2020 ◽  
pp. 1-11
Author(s):  
Seon Hee Kim ◽  
Jihye Lee ◽  
Yun Jung Jang ◽  
Kang-Bong Lee ◽  
Yeonhee Lee
Keyword(s):  
Secondary Ion Mass Spectrometry ◽  
Contact Lenses ◽  
Analytical Techniques ◽  
Pigment Layer ◽  
Force Microscopy ◽  
Soft Contact Lenses ◽  
Atomic Force ◽  
Tof Sims ◽  
The Cross ◽  
Specific Fragment

Over the years, soft contact lenses for vision correction and cosmetic and therapeutic purposes have been greatly improved. For cosmetic contact lenses, the pigments need to be nontoxic, and the position of the pigment layer is particularly important because of the risks posed by pigment elution and the roughness of the lens surface. In this paper, we characterized the properties of brown cosmetic contact lenses made by three different manufacturers using surface analytical techniques. The surface topographies of the noncolored and colored parts were obtained by atomic force microscopy (AFM), and the position and composition of the pigment layer were determined by analyzing the cross section of the contact lenses using scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX). The influence of pigment location on surface roughness was also examined. In addition, to find the method of the evaluation for the risk of surface elution of the pigments in the colored parts, the mass spectra and ion images of the surfaces were obtained by time-of-flight secondary ion mass spectrometry (ToF-SIMS) with a new sample preparation. From the ToF-SIMS spectra, we observed specific fragment ions of the poly(hydroxyethyl methacrylate) (PHEMA) polymer and found differences in the composition of the pigment layer depending on the manufacturers. The cross-sectioned image and 3D chemical characterizations of metallic and specific ions in the brown cosmetic contact lenses clearly indicated the spatial distribution and location of the pigment layer that can be used for the evaluation of pigment elution.

scholarly journals Novel Combination of Atomic Force Microscopy and Epifluorescence Microscopy for Visualization of Leaching Bacteria on Pyrite

2007 ◽  
Vol 74 (2) ◽  
pp. 410-415 ◽  
Author(s):  
Stefanie Mangold ◽  
Kerstin Harneit ◽  
Thore Rohwerder ◽  
Günter Claus ◽  
Wolfgang Sand
Keyword(s):  
Atomic Force Microscopy ◽  
Extracellular Polymeric Substances ◽  
Metal Sulfide ◽  
Epifluorescence Microscopy ◽  
Bacterial Cells ◽  
Cell Integrity ◽  
Force Microscopy ◽  
Topographic Features ◽  
Atomic Force ◽  
Leaching Bacteria

ABSTRACT Bioleaching of metal sulfides is an interfacial process comprising the interactions of attached bacterial cells and bacterial extracellular polymeric substances with the surface of a mineral sulfide. Such processes and the associated biofilms can be investigated at high spatial resolution using atomic force microscopy (AFM). Therefore, we visualized biofilms of the meso-acidophilic leaching bacterium Acidithiobacillus ferrooxidans strain A2 on the metal sulfide pyrite with a newly developed combination of AFM with epifluorescence microscopy (EFM). This novel system allowed the imaging of the same sample location with both instruments. The pyrite sample, as fixed on a shuttle stage, was transferred between AFM and EFM devices. By staining the bacterial DNA with a specific fluorescence dye, bacterial cells were labeled and could easily be distinguished from other topographic features occurring in the AFM image. AFM scanning in liquid caused deformation and detachment of cells, but scanning in air had no effect on cell integrity. In summary, we successfully demonstrate that the new microscopic system was applicable for visualizing bioleaching samples. Moreover, the combination of AFM and EFM in general seems to be a powerful tool for investigations of biofilms on opaque materials and will help to advance our knowledge of biological interfacial processes. In principle, the shuttle stage can be transferred to additional instruments, and combinations of AFM and EFM with other surface-analyzing devices can be proposed.

Multiparameter Imaging and Understanding the Role of the Tip - Atomic Resolution Images of Rutile TiO2 (110)

2011 ◽  
Vol 1318 ◽  
Author(s):  
S. J. O’Brien ◽  
H. Ozgur Ozer ◽  
G. L. W. Cross ◽  
J. B. Pethica
Keyword(s):  
Barrier Height ◽  
Local Density ◽  
Chemical Species ◽  
Analytical Techniques ◽  
Scanning Tunneling ◽  
Tunneling Microscopy ◽  
Force Microscopy ◽  
Atomic Force ◽  
Simultaneous Acquisition ◽  
Stm Images

ABSTRACTA major challenge for scanned probe microscopy is to identify structures and chemical species on a surface, which have not already been inferred from other analytical techniques. Progress is impeded by the fact that in general the structure and composition of the tip atom is not known. To illustrate some of the issues involved, we report simultaneous scanning tunneling microscopy/atomic force microscopy (STM/AFM) of the TiO2 (110) surface. The use of small amplitudes enabled the simultaneous acquisition of force gradient and barrier height images during standard STM imaging. Surprisingly, we find most STM images exhibit a corrugation contrast inverse to that usually reported in the literature. However, regardless of the contrast in STM, force gradient images always showed greater attraction over O rows. Barrier height images also show this consistency, always being greater over O rows. This supports the theoretical model of the electronic structure of the surface, but shows that the tip structure and interaction cannot be ignored in modeling STM images. We conclude that there is a fine balance between topography and local density of states (LDOS) in STM imaging of this surface; which of them dominates the STM image is determined by the tip. Simultaneous multi-parameter imaging is useful in interpreting images reliably, particularly on multi-component surfaces.

Sign in / Sign up

Export Citation Format

Share Document