scholarly journals Influence of the temperature in germination of seeds of jabuticaba tree

2003 ◽  
Vol 25 (1) ◽  
pp. 197-198 ◽  
Author(s):  
Renata Aparecida de Andrade ◽  
Antonio Baldo Geraldo Martins
Keyword(s):  
Low Temperature ◽  
The Other ◽  
Effect Of Temperature ◽  
Medium Size ◽  
Different Types ◽  
Commercial Crop ◽  
South Of Brazil ◽  
Number Of Branches

The jaboticaba tree (Myrciaria spp.) is originated from the center-south of Brazil and presents different types. It's a medium size tree, with tendency to form a crown with great number of branches. A characteristic considered as limitant for the commercial crop is the great juvenility, advicing producing good rootstocks of seedlings and graft wanted varieties, and other vegetative processes. With the purpose of evaluating the effect of temperature on germination of three clones of jaboticaba tree, was carried out a laboratorial research. It was observed influence of the temperature on germination. The highest percentage of germination was obtained at low temperature (15ºC and 20ºC). When it was used the temperature of 35ºC, two clones had only 8% of germination, while the other one was verified 35%. These values show the possibility of the ocurrence of variability among the clones of jaboticaba tree.

THE EFFECT OF TEMPERATURE ON THE EXPRESSION OF FACTORS GOVERNING RUST REACTION IN A CROSS BETWEEN TWO VARIETIES OF TRITICUM VULGARE

1931 ◽  
Vol 5 (2) ◽  
pp. 200-207 ◽  
Author(s):  
J. B. Harrington
Keyword(s):  
Low Temperature ◽  
Genetic Factors ◽  
The Other ◽  
Effect Of Temperature ◽  
Puccinia Graminis ◽  
Genetic Studies ◽  
Triticum Vulgare ◽  
Susceptibility Factors ◽  
Different Temperatures ◽  
Genetic Hypothesis

Two random populations of F2 plants of the cross Marquillo × Marquis were tested for the reaction of their F3 seedling progenies to form 21 of Puccinia graminis tritici in the greenhouse, at average daily temperatures of 69.7° F. (the warm test) for one population, and 60.6° F. (the cool test) for the other. In both tests Marquis was susceptible and Marquillo was resistant. In the "warm test" ten families of a total of 781 were resistant. In the "cool test" five families of a total of 301 were susceptible. In both cases the results fitted a 63:1 ratio excellently, indicating the operation of three main genetic factors for rust reaction. A genetic hypothesis is proposed that explains the results on the basis of the influence of low temperature in curtailing the action of three susceptibility factors A, B and C carried by Marquis. The results indicate that genetic studies on characters which are easily influenced by environmental conditions should be made under controlled conditions, after ascertaining in advance the general effects of different temperatures, etc., upon the hybrid material to be used.

RHIZOPUS ROOT ROT OF SUGAR BEET

1943 ◽  
Vol 21c (8) ◽  
pp. 235-248 ◽  
Author(s):  
A. A. Hildebrand ◽  
L. W. Koch
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Sugar Beet ◽  
Root Rot ◽  
The Other ◽  
Effect Of Temperature ◽  
Experimental Plot ◽  
Optimum Growth ◽  
Causal Organism ◽  
Sugar Beets

During the summer of 1942 sugar beets growing in an experimental plot at the Harrow laboratory were destroyed by a root rot of a type that apparently has been reported only once previously on this host in North America. Wilting of the foliage first attracts attention to affected plants, the roots of which show, externally, grayish-brown discoloured areas and, internally, fairly sharply-delimited, grayish to coffee-coloured lesions, affected tissues being more or less spongy in consistency. The causal organism, found to be a wound parasite, has been identified as Rhizopus arrhizus Fischer. The effect of temperature on the growth in culture and on the pathogenicity of this fungus and of representatives of the species, R. oryzae and R. nigricans, has been studied. It has been found that R. arrhizus and R. oryzae are relatively high temperature organisms, showing optimum growth at about 34° to 36 °C., and each capable of infecting and destroying artificially injured sugar beets most rapidly between 30° and 40 °C. R. nigricans, also a wound parasite is, on the other hand, a relatively low temperature organism showing optimum growth in culture at about 24° and displaying highest infection capability at about 14° to 16 °C.

The effect of temperature on the responses to electrical stimulation of the isolated cerebral cortex of the cat

1969 ◽  
Vol 47 (9) ◽  
pp. 747-753
Author(s):  
J. P. Harwood ◽  
H. D. Sanders
Keyword(s):  
Cerebral Cortex ◽  
Electrical Stimulation ◽  
Low Temperature ◽  
Differential Effect ◽  
The Other ◽  
Effect Of Temperature ◽  
Induced Responses ◽  
Isolated Cortex ◽  
Separate Identity ◽  
Stimulation Of

The effect of temperature over the range 28 to 37 °C was studied on the electrically induced responses in the neuronally isolated cortex of the cat. The positive burst response (PBR) was found to be insensitive to a fall in temperature with no change in threshold, although the duration of the response was increased at low temperature. The threshold for inducing the epileptiform afterdischarge (EAD) remained constant in some animals but decreased in half of the animals studied. As the temperature was lowered, the amplitude of the EAD decreased while the frequency increased. The epileptiform sustaining response (ESR) on the other hand was markedly sensitive to temperature and disappeared around 32 °C. The differential effect of temperature upon the PBR and ESR, which have similar parameters for their production, provides further evidence for the separate identity of the two responses.

Acetylene chemisorption at palladium: Effect of temperature and structure of the surface

1984 ◽  
Vol 49 (6) ◽  
pp. 1448-1458
Author(s):  
Josef Kopešťanský
Keyword(s):  
Work Function ◽  
Atomic Hydrogen ◽  
Effect Of Temperature ◽  
Thermally Stable ◽  
Template Effect ◽  
Temperature Range ◽  
Adsorbed Layers ◽  
Different Types ◽  
Adsorption Complexes ◽  
Low Coverage

The effect of temperature and structure of the palladium surfaces on acetylene chemisorption was studied along with the interaction of the adsorbed layers with molecular and atomic hydrogen. The work function changes were measured and combined with the volumetric measurements and analysis of the products. At temperature below 100 °C, acetylene is adsorbed almost without dissociation and forms at least two different types of thermally stable adsorption complexes. Acetylene adsorbed at 200 °C is partly decomposed, especially in the low coverage region. Besides the above mentioned effects, the template effect of adsorbed acetylene was studied in the temperature range from -80° to 25 °C. It has been shown that this effect is a typical phenomenon of the palladium-acetylene system which is not due to surface impurities.

scholarly journals GERMINATION AND VIGOUR IN SEEDS OF THE COWPEA IN RESPONSE TO SALT AND HEAT STRESS

2019 ◽  
Vol 32 (1) ◽  
pp. 143-151 ◽  
Author(s):  
Luma Rayane de Lima Nunes ◽  
Paloma Rayane Pinheiro ◽  
Charles Lobo Pinheiro ◽  
Kelly Andressa Peres Lima ◽  
Alek Sandro Dutra
Keyword(s):  
Salt Stress ◽  
Heat Stress ◽  
High Temperature ◽  
Low Temperature ◽  
Vigna Unguiculata ◽  
Salt Concentration ◽  
Dry Weight ◽  
Germination Percentage ◽  
Different Types ◽  
Different Temperatures

ABSTRACT Salinity is prejudicial to plant development, causing different types of damage to species, or even between genotypes of the same species, with the effects being aggravated when combined with other types of stress, such as heat stress. The aim of this study was to evaluate the tolerance of cowpea genotypes (Vigna unguiculata L. Walp.) to salt stress at different temperatures. Seeds of the Pujante, Epace 10 and Marataoã genotypes were placed on paper rolls (Germitest®) moistened with different salt concentrations of 0.0 (control), 1.5, 3.0, 4.5 and 6.0 dS m-1, and placed in a germination chamber (BOD) at temperatures of 20, 25, 30 and 35°C. The experiment was conducted in a completely randomised design, in a 3 × 4 × 5 scheme of subdivided plots, with four replications per treatment. The variables under analysis were germination percentage, first germination count, shoot and root length, and total seedling dry weight. At temperatures of 30 and 35°C, increases in the salt concentration were more damaging to germination in the Epace 10 and Pujante genotypes, while for the Marataoã genotype, damage occurred at the temperature of 20°C. At 25°C, germination and vigour in the genotypes were higher, with the Pujante genotype proving to be more tolerant to salt stress, whereas Epace 10 and Marataoã were more tolerant to high temperatures. Germination in the cowpea genotypes was more sensitive to salt stress when subjected to heat stress caused by the low temperature of 20°C or high temperature of 35°C.

scholarly journals The Respiration of some Planktonic copepods II. The Effect Of Temperature

1953 ◽  
Vol 31 (3) ◽  
pp. 447-460 ◽  
Author(s):  
D. T. Gauld ◽  
J. E. G. Raymont
Keyword(s):  
Respiratory Rate ◽  
The Body ◽  
The Other ◽  
Effect Of Temperature ◽  
Acartia Clausi ◽  
Temora Longicornis ◽  
Different Temperatures ◽  
Planktonic Copepods ◽  
The Difference ◽  
The Relationship

The respiratory rates of three species of planktonic copepods, Acartia clausi, Centropages hamatus and Temora longicornis, were measured at four different temperatures.The relationship between respiratory rate and temperature was found to be similar to that previously found for Calanus, although the slope of the curves differed in the different species.The observations on Centropages at 13 and 170 C. can be divided into two groups and it is suggested that the differences are due to the use of copepods from two different generations.The relationship between the respiratory rates and lengths of Acartia and Centropages agreed very well with that previously found for other species. That for Temora was rather different: the difference is probably due to the distinct difference in the shape of the body of Temora from those of the other species.The application of these measurements to estimates of the food requirements of the copepods is discussed.

Comparative Surface Imaging Study of Multifocal Diffractive Intraocular Lenses

2021 ◽  
Author(s):  
Hyeck Soo Son ◽  
Jung Min Lee ◽  
Ramin Khoramnia ◽  
Chul Young Choi
Keyword(s):  
Imaging Study ◽  
The Other ◽  
Intraocular Lenses ◽  
Optical Surface ◽  
Diffractive Optic ◽  
Atomic Force ◽  
Acceptable Range ◽  
Different Types ◽  
Concentric Pattern

Abstract Purpose To analyse and compare the surface topography and roughness of three different types of diffractive multifocal IOLs. Methods Using scanning electron microscope (SEM, Inspect F, 5.0 KV, maximum magnification up to 20,000) and atomic force microscope (AFM, Park Systems, XE-100, non-contact, area profile comparison, 10 × 10 µm, 40 × 40 µm), the surface quality of the following diffractive IOLs was studied: the AcrySof IQ PanOptix (Alcon, USA), the AT LARA 829MP (Carl Zeiss Meditec, Germany), and Tecnis Symfony (Johnson&Johnson Vision, USA). The measurements were made over three representative areas (central non-diffractive optic, central diffractive optic, and diffractive step) of each IOL. Roughness profile in terms of mean arithmetic roughness (Ra) and root-mean-squared roughness (Rq) values were obtained and compared statistically. Results In SEM examination, all IOLs showed a smooth optical surface without any irregularities at low magnification. At higher magnification, Tecnis Symfony showed unique highly regular, concentric, and lineate structures in the diffractive optic area which could not be seen in the other studied diffractive IOLs. The differences in the measured Ra and Rq values of the Tecnis Symfony were statistically significant compared to the other models (p < 0.05). Conclusion Various different topographical traits were observed in three diffractive multifocal IOLs. The Ra values of all studied IOLs were within an acceptable range. Tecnis Symfony showed statistically significant higher surface Ra values at both central diffractive optic and diffractive step areas. Furthermore, compared to its counterparts, Tecnis Symfony demonstrated highly ordered, concentric pattern in its diffractive surfaces.

RADIATION EXPOSURE TO THE BACK WITH DIFFERENT TYPES OF APRONS

2021 ◽  
Author(s):  
Seung Wan Hong ◽  
Tae Won Kim ◽  
Jae Hun Kim
Keyword(s):  
Radiation Exposure ◽  
Effective Dose ◽  
Exposure Time ◽  
The Other ◽  
Lead Apron ◽  
Type Group ◽  
Air Kerma ◽  
Different Types ◽  
The Relationship

Abstract Physicians and nurses stand with their back towards the C-arm fluoroscope when using the computer, taking things out of closets and preparing drugs for injection or instruments for intervention. This study was conducted to investigate the relationship between the type of lead apron and radiation exposure to the backs of physicians and nurses while using C-arm fluoroscopy. We compared radiation exposure to the back in the three groups: no lead apron (group C), front coverage type (group F) and wrap-around type (group W). The other wrap-around type apron was put on the bed instead of on a patient. We ran C-arm fluoroscopy 40 times for each measurement. We collected the air kerma (AK), exposure time (ET) and effective dose (ED) of the bedside table, upper part and lower part of apron. We measured these variables 30 times for each location. In group F, ED of the upper part was the highest (p &lt; 0.001). ED of the lower part in group C and F was higher than that in group W (p = 0.012). The radiation exposure with a front coverage type apron is higher than that of the wrap-around type and even no apron at the neck or thyroid. For reducing radiation exposure to the back of physician or nurse, the wrap-around type apron is recommended. This type of apron can reduce radiation to the back when the physician turns away from the patient or C-arm fluoroscopy.

scholarly journals MITOTIC CROSSING OVER AND NONDISJUNCTION IN TRANSLOCATION HETEROZYGOTES OF ASPERGILLUS

Genetics ◽  
1976 ◽  
Vol 82 (4) ◽  
pp. 605-627
Author(s):  
Etta Käfer
Keyword(s):  
Selective Advantage ◽  
The Other ◽  
Translocation Chromosome ◽  
Crossing Over ◽  
Selective Marker ◽  
Reciprocal Translocations ◽  
Poor Growth ◽  
Different Types ◽  
Diploid Genotype ◽  
One Step

ABSTRACT To analyze mitotic recombination in translocation heterozygotes of A. nidulans two sets of well-marked diploids were constructed, homo- or heterozygous for the reciprocal translocations T1(IL;VIIR) or T2(IL;VIIIR) and heterozygous for selective markers on IL. It was found that from all translocation heterozygotes some of the expected mitotic crossover types could be selected. Such crossovers are monosomic for one translocated segment and trisomic for the other and recovery depends on the relative viabilities of these unbalanced types. The obtained segregants show characteristically reduced growth rates and conidiation dependent on sizes and types of mono- and trisomic segments, and all spontaneously produce normal diploid sectors. Such secondary diploid types either arose in one step of compensating crossing over in the other involved arm, or—more conspicuously—in two steps of nondisjunction via a trisomic intermediate.—In both of the analyzed translocations the segments translocated to IL were extremely long, while those translocated from IL were relatively short. The break in I for T1(I;VII) was located distal to the main selective marker in IL, while that of T2(I;VIII) had been mapped proximal but closely linked to it. Therefore, as expected, the selected primary crossover from the two diploids with T2(I;VIII) in coupling or in repulsion to the selective marker, showed the same chromosomal imbalance and poor growth. These could however be distinguished visually because they spontaneously produced different trisomic intermediates in the next step, in accordance with the different arrangement of the aneuploid segments. On the other hand, from diploids heterozygous for T1(I;VII) mitotic crossovers could only be selected when the selective markers were in coupling with the translocation; these crossovers were relatively well-growing and produced frequent secondary segregants of the expected trisomic, 2n+VII, type. For both translocations it was impossible to recover the reciprocal crossover types (which would be trisomic for the distal segments of I and monosomic for most of groups VII or VIII) presumably because these were too inviable to form conidia.—In addition to the selected segregants of expected types a variety of unexpected ones were isolated. The conditions of selection used favour visual detection of aneuploid types, even if these produce only a few conidial heads and are not at a selective advantage. For T2(I;VIII) these "non-selected" unbalanced segregants were mainly "reciprocal" crossovers of the same phenotype and imbalance as the selected ones. For T1(I;VII) two quite different types were obtained, both possibly originating with loss of the small VII-Itranslocation chromosome. One was isolated when the selective marker in repulsion to T1(I;VII) was used and, without being homo- or hemizygous for the selective marker, it produced stable sectors homozygous for this marker. The other was obtained from both coupling and repulsion diploids and showed a near-diploid genotype; it produced practically only haploid stable sectors of the type expected from monosomics, 2n-1 for the short translocation chromosome.

scholarly journals Development of Speech Recognition Systems in Emergency Call Centers

Symmetry ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 634
Author(s):  
Alakbar Valizada ◽  
Natavan Akhundova ◽  
Samir Rustamov
Keyword(s):  
Speech Recognition ◽  
Markov Model ◽  
Hidden Markov ◽  
Call Centers ◽  
The Other ◽  
Language Models ◽  
Emergency Call ◽  
Acoustic Model ◽  
Different Types ◽  
Recognition Systems

In this paper, various methodologies of acoustic and language models, as well as labeling methods for automatic speech recognition for spoken dialogues in emergency call centers were investigated and comparatively analyzed. Because of the fact that dialogue speech in call centers has specific context and noisy, emotional environments, available speech recognition systems show poor performance. Therefore, in order to accurately recognize dialogue speeches, the main modules of speech recognition systems—language models and acoustic training methodologies—as well as symmetric data labeling approaches have been investigated and analyzed. To find an effective acoustic model for dialogue data, different types of Gaussian Mixture Model/Hidden Markov Model (GMM/HMM) and Deep Neural Network/Hidden Markov Model (DNN/HMM) methodologies were trained and compared. Additionally, effective language models for dialogue systems were defined based on extrinsic and intrinsic methods. Lastly, our suggested data labeling approaches with spelling correction are compared with common labeling methods resulting in outperforming the other methods with a notable percentage. Based on the results of the experiments, we determined that DNN/HMM for an acoustic model, trigram with Kneser–Ney discounting for a language model and using spelling correction before training data for a labeling method are effective configurations for dialogue speech recognition in emergency call centers. It should be noted that this research was conducted with two different types of datasets collected from emergency calls: the Dialogue dataset (27 h), which encapsulates call agents’ speech, and the Summary dataset (53 h), which contains voiced summaries of those dialogues describing emergency cases. Even though the speech taken from the emergency call center is in the Azerbaijani language, which belongs to the Turkic group of languages, our approaches are not tightly connected to specific language features. Hence, it is anticipated that suggested approaches can be applied to the other languages of the same group.

Sign in / Sign up

Export Citation Format

Share Document