scholarly journals Analysis of Possible Origination of Domes in Longwalls

2019 ◽  
Vol 4 (1) ◽  
pp. 57-64
Author(s):  
R. I. Imranov ◽  
E. N. Khmyrova ◽  
O. G. Besimbayeva ◽  
S. P. Olenyuk ◽  
A. Z. Kapasova
Keyword(s):  
Rock Mass ◽  
Factor Of Safety ◽  
Coal Seams ◽  
Mining Operations ◽  
Compressive Stresses ◽  
Digital Modeling ◽  
Geological Conditions ◽  
The Stability ◽  
High Ash Coal ◽  
Borehole Log

The research is aimed at solving problems of assessing underground working stability in complicated mining and geological conditions to increase reliability and safety of mining operations. Analysis of geomechanical processes occurring in a rock mass during extraction of coal seams to determine the stability of mining block roof is the most important task. The performed digital modeling of the rock mass based on the structural logs for K1 seam and the nearest borehole log enabled highly detailed identifying the types of rocks occurred in the seam roof and their strength characteristics, compressive stresses. To determine the stability of a mining block roof, the factor of safety of the rocks was used, which was determined by modeling method using Phase 28.0 and Rockscince software. The carbonaceous argillite parting 0.09–0.12 m thick was taken as the contact of the longwall with the seam roof, and, for completeness of the analysis, the upper high-ash coal member in the seam roof up to 0.7 m thick was used. The modeling findings, presented in the graph of dependence between the safety factor and the distance between the belt heading and air drift, showed that the probability of dome formation in the longwall is high, as the factor of safety of the rocks is less than unity, that indicates the roof instability in the course of the coal seam block extraction. The modeling methods allowed assessing the mine working stability, based on which the measures to improve the reliability and safety of mining operations can be timely developed, and due technical and technological solutions shall be reached.

New approaches to the assessment of stability of rock rock arrays

2020 ◽  
pp. 68-77
Author(s):  
A. V. Zubkov ◽  
S. V. Sentyabov
Keyword(s):  
Rock Mass ◽  
Stable State ◽  
Strength Properties ◽  
State Standards ◽  
Mining Operations ◽  
Compressive Stresses ◽  
Rock Formations ◽  
Third Stage ◽  
The Stability ◽  
Definition Of

When summarizing the results obtained on the stability of rock masses a discrepancy was found between the parameters of the strength properties of rock formations, determined according to existing methods and state standards, to their values under natural conditions. As a result of the studies, the degree of geomechanical knowledge of the rock mass of the Gaisky underground mine is significantly increased. Based on the numerical simulation of the stress-strain state of the ore and rock mass, the rationale for the optimal mining of reserves at a depth of -830 / -1390 m was substantiated. The main compressive stresses of the Gaisky deposit act in the sub-latitudinal direction along the axis of the chambers, creating stresses exceeding 100 MPa on their outcrops. If the compressive strength of the massif is up to 100 MPa, found by known methods, ore masses of the third stage (pillars) below the -910 m horizon should be destroyed. In assessing the stability of pillars (chamber walls) in the last 3 years, in some cases, disagreement arose. The calculated stresses exceed the maximum allowable ones, but the pillars (chamber walls) remain stable. It justifies the correction of the obtained values of the ultimate strength of rocks with correction factors and the introduction of the definition of reduced strength (227 MPa), in which the roof, walls of the chambers and pillars are in a stable state. As a result of the study, the obtained values of the stress state of the rock mass and its strength characteristics more realistically reflect the predicted destruction or stability of the rock mass at the mine. The performed studies contribute to a more justified adjustment of mining technology parameters while ensuring the safety of mining operations.

scholarly journals Substantiation of Safe Conditions During Undermining of Hydraulic Waste Disposal

2018 ◽  
Vol 41 ◽  
pp. 01007
Author(s):  
Yuriy Kutepov ◽  
Aleksandr Mironov ◽  
Maksim Sablin ◽  
Elena Borger
Keyword(s):  
Rock Mass ◽  
Waste Disposal ◽  
Coal Mine ◽  
Water Body ◽  
Water Inflow ◽  
Open Pit ◽  
Coal Seams ◽  
Geological Conditions ◽  
Mine Workings ◽  
Mine Dump

This article considers mining and geological conditions of the site “Blagodatny” of the mine named after A.D. Ruban located underneaththe old open pit coal mine and the hydraulic-mine dump. The potentially dangerous zones in the undermined rock mass have been identified based onthe conditions of formation of water inflow into mine workings. Safe depthof coal seams mining has been calculated depending on the type of water body – the hydraulic-mine dump.

scholarly journals Peculiarities of using classification indicators of the coal metamorphism degree for predicting the hazardous coal seams properties

2020 ◽  
Vol 201 ◽  
pp. 01014
Author(s):  
Mykola Antoshchenko ◽  
Elvira Filatieva ◽  
Vladyslav Yefimtsev ◽  
Vadym Tarasov
Keyword(s):  
Spontaneous Combustion ◽  
Chemical Activity ◽  
Mining Engineering ◽  
Coal Seams ◽  
Mining Operations ◽  
Emergency Situations ◽  
Specific Composition ◽  
Geological Conditions ◽  
Definition Of ◽  
Mining Coal

Currently, there is no reliable regulatory framework for determining the hazardous properties of coal seams, including the propensity of coal for spontaneous combustion. Under relatively identical mining engineering and geological conditions for mining coal seams, the probability of emergency situations is determined to a large extent by the genetic properties of coal. The research methodology is based on the classical definition of metamorphism, which characterizes the change in the composition and properties of coal. The analysis involves indicators that directly or indirectly characterize the elemental composition of organic and mineral mass, chemical activity and physico-mechanical properties. This will allow to establish a specific composition and properties that contribute to the manifestation of certain hazardous properties of coal seams during mining operations. It is shown that the modern industrial classification does not take into account the change in the organic and mineral constituents of coal, which does not make it possible to use it unchanged to predict the hazardous properties of coal seams.

scholarly journals Operational Control of the Feed of the Harvester

2019 ◽  
Vol 105 ◽  
pp. 01009
Author(s):  
Sergey Kubrin ◽  
Konstantin Kopylov
Keyword(s):  
Operational Control ◽  
Coal Seams ◽  
Mining Operations ◽  
Technological Processes ◽  
Mining Enterprise ◽  
Geological Conditions ◽  
Operational Management ◽  
Mining Coal ◽  
The Right ◽  
Planning Production

Comparison of normative and actual indicators on mining testifies to inefficient work of the excavating equipment. The results of the correlation analysis of the speed of movement of the harvester relative to the section of the support with the readings of methane sensors revealed a significant dependence. When conducting mining operations in complex geological conditions at great depths, a joint step-by-step carrying out of various technological processes is required to ensure the preparation, opening and excavation of reserves and the creation of safe conditions for mining coal seams. At the same time, efforts should be made to minimize time, human and energy resources. In this regard, of particular importance is the right choice of the program of operational management of technological processes of mining, monitoring the implementation of technological operations for the timely detection of deviations from the selected mode, adjustment of the established current modes of operation of technological processes and the development, if necessary, measures aimed at reducing the risks of accidents. A promising direction of solving this problem is the use of modeling methods. The developed models of technological processes of the mining enterprise will allow planning production and supporting decision-making in the implementation of operational management.

Establishment and Application of Microseismic Monitoring System to Deep-Buried Underground Powerhouse

2013 ◽  
Vol 838-841 ◽  
pp. 889-893
Author(s):  
Biao Li ◽  
Feng Dai ◽  
Nu Wen Xu ◽  
Chun Sha
Keyword(s):  
Rock Mass ◽  
Monitoring System ◽  
Wave Velocity ◽  
Microseismic Monitoring ◽  
Surrounding Rock ◽  
P Wave ◽  
Monitoring Method ◽  
Underground Powerhouse ◽  
Geological Conditions ◽  
The Stability

The right bank underground powerhouse of Houziyan hydropower station is a typical deep-buried type with high geostress and complicated geological conditions. To monitor and analyze the stability of surrounding rock mass during continuous excavation of the powerhouse excavation and locate the potential failure zones, an ESG (Engineering Seismology Group) microseismic monitoring system manufactured in Canada was installed in April, 2013. The wave velocity of the monitoring system was determined through fixed blasting tests. And the average location error is the minimum while P-wave velocity is 5700m/s, less than 10m and meeting the system request. By combining the temporal and spatial distribution regularity of microseimic events with field excavation, micro-crack clusters and potential instability zones were identified and delineated. The results will provide a reference for later excavations and supports of the underground powerhouse. Furthermore, a new monitoring method can also be supplied for the stability analysis of surrounding rock mass in deep-buried underground powerhouses.

scholarly journals Modeling the Spatial and Temporal Evolution of Stress during Multiworking Face Mining in Close Distance Coal Seams

2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Yong Zhang ◽  
Jinkun Yang ◽  
Jiaxuan Zhang ◽  
Xiaoming Sun ◽  
Chen Chen ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Stress Distribution ◽  
Temporal Evolution ◽  
Coal Pillar ◽  
Coal Seams ◽  
Geological Conditions ◽  
Coal Pillars ◽  
The Stability ◽  
Close Distance ◽  
Close Distance Coal Seams

Mining in close distance coal seams (CDCSs) is frequently associated with engineering disasters because of the complicated nature of stress distribution within CDCSs. In order to establish a layout of a roadway to minimize the occurrence of disasters associated with mining CDCS, here the spatial and temporal evolution of stress distribution during the multiworking face mining of a CDCS was explored through numerical simulation based on the engineering and geological conditions of the Nantun Coal Mine. The numerical simulation results indicate that, after the extraction of adjacent multiple working faces, the spatial distribution of stress can be characterized with areas of increased, reduced, and intact stress. The superposed stress of inclined seams that are very close to each other propagates through coal pillars in the bottom floor, and this propagation follows neither the line along the axis of the coal pillar nor the line perpendicular to the direction of the floor. It instead propagates along a line angled with the axis of the coal pillar. The roadway can be arranged in the area with reduced stress, to improve its the stability. Based on the computed spatial and temporal evolution of stress, an optimized layout of roadway was proposed. This layout features a reasonable interval between the mining roadway and a minimal proportion of increased stress areas along the mining roadway and is aligned with geological structures.

scholarly journals Numerical Simulation of the Effect of Dynamic Stress on the Rock Surrounding a Mine Roadway

2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Jun-hua Xue ◽  
Ke-liang Zhan ◽  
Xuan-hong Du ◽  
Qian Ma
Keyword(s):  
Numerical Simulation ◽  
Rock Mass ◽  
Rock Burst ◽  
Dynamic Stress ◽  
Simulation Method ◽  
Mining Areas ◽  
Geological Conditions ◽  
Mine Roadway ◽  
The Stability ◽  
Two Sides

In view of the damage of dynamic stress to the rock surrounding a mine roadway during coal mining, based on the actual geological conditions of Zhuji mine in Huainan, China, a UDEC model was established to study the influences of the thickness and strength of the direct roof above the coal seam and the anchorage effect on the stability of the roadway. The failure mechanism and effect of the dynamic stress on the rock surrounding a mine roadway were revealed. Under dynamic stress, cracks appear near the side of the roadway where the stress is concentrated. These cracks rapidly expand to the two sides of coal and rock mass. At the same time, the coal and rock mass at the top of the roadway fall, and finally, the two sides of coal and rock mass were broken and ejected into the roadway, causing a rock burst. However, when the same dynamic stress is applied to the roadway after supports are installed, there is no large-deformation failure in the roadway, which shows that, under certain conditions, rock bolting can improve the stability and seismic resistance of the surrounding coal and rock mass. Furthermore, by simulating the failure of surrounding rock with different strengths and thicknesses in the immediate roof, it is found that the thinner the roof, the greater the influence of the dynamic stress on the roadway; the stronger the roof is, the more likely the rock burst will occur with greater intensity under the same dynamic stress. A numerical simulation method was used to analyze the factors influencing rock bursting. The results provide a theoretical basis for research into the causes and prevention of rock bursts in deep mining areas.

Landslide stabilization experience in Urtui open pit mine

2021 ◽  
pp. 102-106
Author(s):  
O. A. Isyanov ◽  
◽  
D. I. Ilderov ◽  
V. I. Suprun ◽  
S. A. Radchenko ◽  
...  
Keyword(s):  
Rock Mass ◽  
Large Scale ◽  
Geological Structure ◽  
Stability Control ◽  
Open Pit Mine ◽  
Open Pit ◽  
Open Pit Mining ◽  
Coal Seams ◽  
Mining Operations ◽  
Early Access

Instability of pit wall slopes is the most critical accident in open pit mining. The risk of damages to pit walls is proportional to the height of exposed surfaces and to the time of exposure. Among many factors governing pit wall stability, the major factor is geological structure and weakening zones in rock mass. Deformation processes are initiated in host rock mass of coal seams mostly because of undercutting of weak interlayers. Alongside with local undercutting, another cause of landslides is transition of coal mining from down-dip extraction to up-dip extraction. The sequence of mining and morphology of weak interlayers also have influence on initiation and evolution of deformations. The basic component of engineering solutions on pit wall stability control is optimization of mining sequence and methods of accessing working horizons in open pit mines. Large-scale deformation of Western and Southeastern pit walls in Urtui mine could be avoided using the optimized sequence of mining operations. For example, mining advance mostly along the curve of the Urtui centroclinal fold, with early access and destress of the eastern and, first of all, western wings of the fold could make it possible to evade from up-dip mining of coal seams and, as a consequence, to solve the major geomechanical problems in the open pit mine.

scholarly journals The Challenges of Open-Pit Mining in the Vicinity of the Salt Dome (Bełchatów Lignite Deposit, Poland)

Energies ◽  
2020 ◽  
Vol 13 (8) ◽  
pp. 1913
Author(s):  
Marek Cała ◽  
Katarzyna Cyran ◽  
Joanna Jakóbczyk ◽  
Michał Kowalski
Keyword(s):  
Rock Mass ◽  
Large Scale ◽  
Salt Dome ◽  
Open Pit ◽  
Open Pit Mining ◽  
Stability Conditions ◽  
Mining Operations ◽  
Mass Behavior ◽  
Geological Conditions ◽  
Wall Slope

The extraction of the Bełchatów lignite deposit located in the vicinity of the Dębina salt dome requires careful planning that considers the influence of mining projects on the slope and salt dome stability conditions. The instability problem is directly related to horizontal and vertical displacement, as well as the complex geological and mining conditions. These conditions are very unique with regard to the co-occurrence of the salt dome and lignite deposits in the same area, as well as the large scale of the pit wall slope. Thus, predicting rock mass behavior and ensuring the safety of mining operations are important issues. The presented analysis focused on the influence of long-term lignite extraction on the western pit wall slope of the Bełchatów field and the salt dome’s stability conditions. This study offers a comprehensive approach to a complex geotechnical problem defined by large-scale, complex geometry, and geological conditions. The rock mass behavior and stress conditions are simulated in numerical modelling. The results of the presented analysis will be useful not only for present mining activities but also for future developments related to post-mining and recultivation plans.

scholarly journals Investigation of stress field parameters at deep horizons of the Gayskoye field**

2020 ◽  
Vol 192 ◽  
pp. 01028
Author(s):  
Sergey Sentyabov ◽  
Albert Zubkov
Keyword(s):  
Rock Mass ◽  
Experimental Studies ◽  
Physical And Mechanical Properties ◽  
Strength Properties ◽  
Concrete Lining ◽  
Complex Structures ◽  
Mining Operations ◽  
Volumetric Expansion ◽  
Shaft Lining ◽  
The Stability

The extraction of solid minerals is associated with the penetration of man into the subsoil by creating either relatively simple or extremely complex structures. All mining operations can be safely and efficiently carried out only on the basis of calculating the stability of these structures, which is based on knowledge of the physical and mechanical properties, the stress state of the rock mass and the patterns of their redistribution and formation in mountain structures. The presented studies confirmed the regularities of the formation of natural stresses in the rock mass, which is the sum of gravitational, static tectonic and variable components, which are formed as a result of uniform periodic volumetric expansion and contraction of the Earth. The problem of shaft stability is due to the need to solve problems to determine the level of stress-strain state and strength properties in concrete lining. The parameters of stresses in the shaft lining and monitoring of their changes were determined using the method of measuring unloading deformations. When analyzing the stresses obtained experimentally by analytical means in the concrete lining of mine shafts, a connection was established with the results of measurements in the rock mass on the basis of 50 meters. Based on the experiment, it was confirmed that theoretical and experimental studies prove that a hierarchically blocky massif of magmatic and metamorphic rocks behaves as an elastic and isotropic medium and changes in natural stresses in the massif Δ on the basis of 5-7 ranks of geoblocks, on the contour of the trunk based on 2 –3 ranks of geoblocks and in the concrete lining of mine shafts Δσb obey this law.

Sign in / Sign up

Export Citation Format

Share Document