scholarly journals IDENTIFICATION OF BAINITE IN A MULTI-PHASE MICROSTRUCTURE OF AN AUSTEMPERED STEEL ALLOY: A METALLOGRAPHY APPROACH

2021 ◽  
Vol 23 (1) ◽  
pp. 43
Author(s):  
Muhammad Yunan Hasbi ◽  
M R Wida'atullah ◽  
Fatayalkadri Citrawati ◽  
Septian Adi Chandra ◽  
L. Suhaemi
Keyword(s):  
Optical Microscope ◽  
Martensite Phase ◽  
Steel Alloy ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
Microstructure Morphology ◽  
Different Color ◽  
Austempering Temperature ◽  
Multi Phase

IDENTIFICATION OF BAINITE IN A MULTI-PHASE MICROSTRUCTURE OF AN AUSTEMPERED STEEL ALLOY: A METALLOGRAPHY APPROACH. Structural characterization of a multi-phase steel has become an exciting issue in various studies to date. This relates to the difficulty in distinguishing phases with similar morphology, i.e. bainite and martensite, through chemical etching. This study discusses a method to observe bainite phase through a metallographic approach on FeNi steel using color etching. Variations in the use of etching in this research include 2% nital, 4% picral, and 15% sodium metabisulphite (SMB). First, the samples were austenized then austempered at either 400 °C or 500 °C, for 60 min followed by quenching in either water or brine solution. Based on optical microscope observations, SMB color etching provides more explicit information on the visualization of bainite and martensite phases because they have different color appearances. The bainite phase is shown in bluish color, while the martensite phase is shown in brownish color. Furthermore, the influence of variation in austempering temperature and quench media on microstructure morphology was also discussed. In addition, the calculation of the lattice parameters of the X-Ray Diffraction (XRD) pattern was also carried out in this study to identify the crystal structure formed.

High Resolution Replication of Organoclay Surfaces

1982 ◽  
Vol 40 ◽  
pp. 576-577
Author(s):  
W. W. Barker ◽  
W. E. Rigsby ◽  
V. J. Hurst ◽  
W. J. Humphreys
Keyword(s):  
Clay Mineral ◽  
Organic Molecule ◽  
Organic Molecules ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
X Ray ◽  
Naturally Occurring ◽  
Silicate Layers ◽  
Mineral Identification

Experimental clay mineral-organic molecule complexes long have been known and some of them have been extensively studied by X-ray diffraction methods. The organic molecules are adsorbed onto the surfaces of the clay minerals, or intercalated between the silicate layers. Natural organo-clays also are widely recognized but generally have not been well characterized. Widely used techniques for clay mineral identification involve treatment of the sample with H2 O2 or other oxidant to destroy any associated organics. This generally simplifies and intensifies the XRD pattern of the clay residue, but helps little with the characterization of the original organoclay. Adequate techniques for the direct observation of synthetic and naturally occurring organoclays are yet to be developed.

Hydrothermal Synthesis and Characterization of BiFeO3 Polyhedral Crystallites

2012 ◽  
Vol 174-177 ◽  
pp. 508-511
Author(s):  
Lin Lin Yang ◽  
Yong Gang Wang ◽  
Yu Jiang Wang ◽  
Xiao Feng Wang
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

BiFeO3 polyhedrons had been successfully synthesized via a hydrothermal method. The as-prepared products were characterized by power X-ray diffraction (XRD) pattern, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The possible mechanisms for the formation of BiFeO3 polyhedrons were discussed. Though comparison experiments, it was found that the kind of precursor played a key role on the morphology control of BiFeO3 crystals.

Characterization of New Inorganic- Organic Hybrid Compounds: (C6H10N2).Cl2 (I), [C6H10N2]2ZnCl4 (II): Crystal Structure, Hirschfield Surface, IR and NMR spectroscopy Analysis.

2021 ◽  
Author(s):  
nejeh hannachi ◽  
faouzi hlel
Keyword(s):  
Nmr Spectroscopy ◽  
Three Dimensional ◽  
X Ray Diffraction ◽  
Spectroscopy Analysis ◽  
Absorption Bands ◽  
Monoclinic System ◽  
Xrd Pattern ◽  
Organic Hybrid ◽  
C Nmr

Abstract Two new organic-inorganic hybrid materials, (C6H10N2).Cl2 (I) and [C6H10N2]2ZnCl4 (II), have been synthesized by hydrothermal method and characterized by single-crystal X-ray diffraction and XRD pattern investigations. These two compounds are crystallized in the monoclinic system; C2/c space group. In the both structures, the anionic-cationic entities are interconnected by hydrogen bonding contacts and p-p Interaction forming three-dimensional networks. Intermolecular interactions were investigated by Hirshfeld surfaces and the contacts of the four different chloride atoms in (II) were compared. The vibrational absorption bands were identified by infrared spectroscopy. These compounds were also investigated by solid state 13C NMR spectroscopy.

Investigations on Physical and Mechanical Characterization of the Joints Fabricated through Microwave Hybrid Heating Method

2021 ◽  
Vol 105 ◽  
pp. 25-41
Author(s):  
Parminder Singh ◽  
D.R. Prajapati ◽  
Shankar Sehgal
Keyword(s):  
Power Level ◽  
Dissimilar Materials ◽  
Hardness Test ◽  
Optical Microscope ◽  
X Ray Diffraction ◽  
Heating Method ◽  
Hybrid Heating ◽  
Microwave Hybrid Heating ◽  
Point Bend

This paper presents the current major research developments and growths in the area of microwave hybrid heating-based joining of similar and dissimilar materials. The study discusses on the different types of specimen materials, susceptor materials, fillers and microwave power level used by researchers for joining process. Comparative studies of joints using different parametric conditions are also mentioned. Physical characterization of joint has been investigated with optical microscope, scanning electron microscope, energy dispersive spectroscopy, electron probe micro analysis, X-ray diffraction and mechanically with hardness test, tensile test, 3-point bend test, impact test. Various methods for design of experiment and optimization are also used to obtain better results. Current study will facilitate the proper choice of input parameters for easy and good joints formation through the microwave hybrid heating method.

scholarly journals Characterization of Polyester Nanocomposites Reinforced with Conifer Fiber Cellulose Nanocrystals

Polymers ◽  
2020 ◽  
Vol 12 (12) ◽  
pp. 2838
Author(s):  
Grazielle da Silva Maradini ◽  
Michel Picanço Oliveira ◽  
Gabriel Madeira da Silva Guanaes ◽  
Gabriel Zuqui Passamani ◽  
Lilian Gasparelli Carreira ◽  
...  
Keyword(s):  
Cellulose Nanocrystals ◽  
Unsaturated Polyester ◽  
Cost Effective ◽  
Bending Test ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
Glass Fiber Composites ◽  
Superior Mechanical Properties ◽  
Polyester Matrix

The application of cellulose nanocrystal has lately been investigated as polymer composites reinforcement owing to favorable characteristics of biodegradability and cost effectiveness as well as superior mechanical properties. In the present work novel nanocomposites of unsaturated polyester matrix reinforced with low amount of 1, 2, and 3 wt% of cellulose nanocrystals obtained from conifer fiber (CNC) were characterized. The polyester matrix and nanocomposites were investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD), bending test, and thermogravimetric analysis (TGA). The result showed that the addition of only 2 wt% CNC increased the nanocomposite flexural strength by 159%, the ductility by 500% and the toughness by 1420%. Fracture analyses by SEM revealed a uniform participation of the CNC in the polyester microstructure. The resistance to thermal degradation of the CNC reinforced nanocomposites was improved in more than 20 °C as compared to neat polyester. No significant changes were detected in the water absorptions and XRD pattern of the neat polyester with incorporations up to 3 wt% CNC. These results reveal that the 2 wt% CNC nanocomposite might be a promising more ductile, lightweight and cost-effective substitute for conventional glass fiber composites in engineering applications.

Mechanochemical Synthesis of Magnesium Doped Hydroxyapatite: Powder Characterization

2013 ◽  
Vol 372 ◽  
pp. 62-65 ◽  
Author(s):  
Sharifah Adzila ◽  
Singh Ramesh ◽  
Iis Sopyan ◽  
C.Y. Tan ◽  
Mohd. Hamdi ◽  
...  
Keyword(s):  
Fourier Transform ◽  
Present Method ◽  
X Ray Diffraction ◽  
Mechanochemical Method ◽  
Xrd Pattern ◽  
X Ray ◽  
Hydroxyapatite Powder ◽  
Powder Properties ◽  
Mg Doped

In this study, the mechanochemical method was employed to synthesize hydroxyapatite (HA) and magnesium (Mg) doped hydroxyapatite (HA) powders. The effect of Mg2+ into the synthesized HA powder properties were investigated. Characterization of the synthesized HA and Mg doped HA at various concentrations (1% - 5% MgHA) were accomplished through X-ray diffraction (XRD) and Fourier transform infrared (FTIR) analyses. nanosize of HA and Mg doped HA powders were successfully synthesized through the present method as indicated from the different peaks intensity and adsorption bands obtained in XRD pattern and FTIR respectively.

Preparation and Characterization of Clays from Different Areas in Ban Bo Suak, Nan Province, Thailand

2015 ◽  
Vol 659 ◽  
pp. 127-131
Author(s):  
Usanee Malee ◽  
Sakdiphon Thiansem
Keyword(s):  
Clay Sample ◽  
X Ray Diffraction ◽  
Scientific Process ◽  
Quartz Content ◽  
Xrd Pattern ◽  
X Ray ◽  
Kiln Site ◽  
Before And After ◽  
Tone Color

The scientific process was used to explain characterization and physical properties of the clay sample close to the ancient Nan kiln site. These samples were obtained from JQA, FQB, PQC and NQD. X-ray diffraction (XRD) and X-ray fluorescence (XRF) technique were used to determine the chemical composition and phase transformation before and after fired at 800-1250 °C. XRF result was confirmed that all clay samples mainly contained SiO2(>80 wt. %) XRD pattern indicated that quartz was the majority of phase in the all of them. High amount of Fe2O3(>1.6 wt. %) was related to the red-brown tone color. The clay sample could be fired up to 1280 °C without wrapping behavior; it was found that FQB clay had the highest firing resistance due to the maximum quartz content.

Preparation and Characterization of a Novel Fluorocarbon Nano Material

2011 ◽  
Vol 236-238 ◽  
pp. 1958-1961
Author(s):  
Jian Ping Hu ◽  
Mei Yu ◽  
Jian Hua Liu ◽  
Song Mei Li ◽  
Jun Xiu Shi
Keyword(s):  
Raw Material ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
Molecule Structure ◽  
Transmission Electron ◽  
Nano Material ◽  
Dta Curves ◽  
Dta Curve ◽  
Morphology Characterization

In this article, preparation approach of a novel fluorocarbon nano material was described. The molecule structure, thermal properties and morphology characterization of the fluorocarbon nano material were studied out by Fourier transform infrared spectroscopy (FTIR), thermal gravity and differential thermal analysis (TG-DTA), transmission electron microscope (TEM) and X-ray diffraction analysis (XRD). It was showed that the basic molecule structure of the fluorocarbon nano material was same as the raw material (FKM) except that a new C=C bond was produced in the fluorocarbon nano material at 1624cm-1. It was demonstrated that the morphology of the fluorocarbon nano material was unattached particles with particle size between 40-60nm under TEM. From TG-DTA curves, it was indicated that the fluorocarbon nano material was high thermal stabile, which oxidizing decomposing temperature in air and thermal decomposing temperature in N2 were 322°C and 295°C, respectively. The XRD pattern showed that the diffraction peak of amorphous carbon was disappeared when the fluoronano material was baked in air at 350°C, and this result validates the oxidizing decomposing of the fluorocarbon nano material at 322°C of the TG-DTA curve.

Physical and Chemical Properties of Mineral in Soils of Cassava Cropping Area: A Case Study in Chonburi Province

2014 ◽  
Vol 979 ◽  
pp. 440-443
Author(s):  
W. Siriprom ◽  
K. Teanchai ◽  
S. Kongsriprapan ◽  
J. Kaewkhao ◽  
N. Sangwaranatee
Keyword(s):  
Thermo Gravimetric Analysis ◽  
Chemical Properties ◽  
Gravimetric Analysis ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
X Ray ◽  
Physical And Chemical ◽  
And Chemical Properties

The chemical and physical properties of topsoil and subsoil which collected from the cassava cropping area in Chonburi Province have been investigated. The characterization of both soil sample were used X-Ray Diffraction (XRD), Energy Dispersive X-Ray Fluorescence (EDXRF) while FTIR used to confirmed the formation of intermolecular bonding and Thermo-Gravimetric Analysis (TGA) used for investigated the crystalline. It was found that, the XRD pattern indicated quartz phase. The chemical composition by XRF reported that the soils samples consist of Si, Al, Ca, Fe, K, Mn, Ti, Cr, Zn, Ag and Cu. and TGA results, noticed that the removal of moisture and organics material.

Synthesis and Characterization of Superparamagnetic NiFe2O4 Nanoparticles

2010 ◽  
Vol 663-665 ◽  
pp. 1325-1328 ◽  
Author(s):  
De Hui Sun ◽  
De Xin Sun ◽  
Yu Hao
Keyword(s):  
Room Temperature ◽  
Size Range ◽  
X Ray Diffraction ◽  
Inverse Spinel ◽  
Cubic Crystal ◽  
Xrd Pattern ◽  
X Ray ◽  
Nife2o4 Nanoparticles ◽  
Average Size

The superparamagnetic NiFe2O4 nanoparticles were synthesized using a hydrothermal technology through P123 sphere micelles as ‘nanoreactor’ in this work. Their morphologies, structures, surface properties and magnetism were characterized by FE-SEM, XRD, FTIR, and VSM, respectively. The nickel ferrite samples are nearly spherical and homogeneous nanoparticles with average size range of about 50-120 nm. They possess superparamagnetism at room temperature and higher saturation magnetization. X-ray diffraction (XRD) pattern confirms that the samples belong to the cubic crystal system with an inverse-spinel structure. Fourier transform infrared (FTIR) absorption spectrum indicates that the NiFe2O4 nanoparticles are stabilized by the P123 adsorbed on the surface of nanoparticles.

Sign in / Sign up

Export Citation Format

Share Document