scholarly journals Safety aspects for automatic guidance of agricultural machines and low-cost solutions

2012 ◽  
Vol 49 (No. 3) ◽  
pp. 103-109 ◽  
Author(s):  
U. Klee ◽  
L. Hofmann ◽  
P. Pickel
Keyword(s):  
Field Experiments ◽  
Low Cost ◽  
Safety System ◽  
Agricultural Engineering ◽  
Automatic Guidance ◽  
Automatic Steering ◽  
Sudden Appearance ◽  
Rule Out ◽  
Agricultural Machines

Automatic steering devices for farm machinery and tractors have the task to relieve the driver from the physical and mental stress of monotonous steering work. Simultaneously, they are intended to help exploit machines and tractors closer to their full performance and improve the quality of work. However, it is not possible to rule out malfunctions or breakdowns of sensors, gaps in guidance lines, obstacles in the field such as ditches or pylons, temporary hazards like the sudden appearance of animals in front of a moving machine or a temporary lack of concentration of the operator. Most of these problems may be prevented by a safety system for automatically steered agricultural machinery developed at the Department of Agricultural Engineering of the Martin-Luther-University in Halle. The function of the components of the safety system and preliminary results obtained in field experiments are introduced and discussed.

Restoration of Agricultural Machines Surfaces by White Cast Iron with the Formation of Technological Repair Units

2018 ◽  
Vol 927 ◽  
pp. 43-47
Author(s):  
V.K. Afanasyev ◽  
A.P. Chernysh ◽  
S.V. Dolgova
Keyword(s):  
Surface Layer ◽  
Cast Iron ◽  
White Cast Iron ◽  
Low Cost ◽  
Operating Conditions ◽  
Technological Environment ◽  
New Approach ◽  
Selection Of ◽  
Agricultural Machines

This article develops a fundamentally new approach in the selection of optimal methods for restoring of worn surfaces of agricultural machines’ tools with the formation and application of technological repair units. Based on the systematization and linkage of modular worn-out surfaces, their operating conditions, technological environment and the choice of their optimal combinations, it found a low-cost method of restoring details with white cast iron to gain a necessary quality of a new surface layer.

Effect of Computerized Auditory Training on Speech Perception of Adults With Hearing Impairment

2013 ◽  
Vol 20 (3) ◽  
pp. 91-106 ◽  
Author(s):  
Rachel Pizarek ◽  
Valeriy Shafiro ◽  
Patricia McCarthy
Keyword(s):  
Hearing Loss ◽  
Speech Perception ◽  
Literature Review ◽  
Low Cost ◽  
Experimental Designs ◽  
Auditory Training ◽  
Hearing Impairments ◽  
Communicative Disorders ◽  
And Training

Computerized auditory training (CAT) is a convenient, low-cost approach to improving communication of individuals with hearing loss or other communicative disorders. A number of CAT programs are being marketed to patients and audiologists. The present literature review is an examination of evidence for the effectiveness of CAT in improving speech perception in adults with hearing impairments. Six current CAT programs, used in 9 published studies, were reviewed. In all 9 studies, some benefit of CAT for speech perception was demonstrated. Although these results are encouraging, the overall quality of available evidence remains low, and many programs currently on the market have not yet been evaluated. Thus, caution is needed when selecting CAT programs for specific patients. It is hoped that future researchers will (a) examine a greater number of CAT programs using more rigorous experimental designs, (b) determine which program features and training regimens are most effective, and (c) indicate which patients may benefit from CAT the most.

THE INFLUENCE OF TILLAGE SYSTEMS ON THE GROWTH, DEVELOPMENT AND YIELD OF LONG-FLAX

2020 ◽  
Author(s):  
V. Dumych ◽  
Keyword(s):  
Growth And Development ◽  
Field Experiments ◽  
Conservation Tillage ◽  
Mineral Fertilizers ◽  
Tillage Systems ◽  
Yield And Quality ◽  
Tillage System ◽  
The Difference ◽  
Flax Seeds

The purpose of research: to improve the technology of growing flax in the Western region of Ukraine on the basis of the introduction of systems for minimizing tillage, which will increase the yield of trusts and seeds. Research methods: field, laboratory, visual and comparative calculation method. Research results: Field experiments included the study of three tillage systems (traditional, canning and mulching) and determining their impact on growth and development and yields of trusts and flax seeds. The traditional tillage system included the following operations: plowing with a reversible plow to a depth of 27 cm, cultivation with simultaneous harrowing and pre-sowing tillage. The conservation system is based on deep shelfless loosening of the soil and provided for chiseling to a depth of 40 cm, disking to a depth of 15 cm, cultivation with simultaneous harrowing, pre-sowing tillage. During the implementation of the mulching system, disking to a depth of 15 cm, cultivation with simultaneous harrowing and pre-sowing tillage with a combined unit was carried out. Tillage implements and machines were used to perform tillage operations: disc harrow BDVP-3,6, reversible plow PON-5/4, chisel PCh-3, cultivator KPSP-4, pre-sowing tillage unit LK-4. The SZ-3,6 ASTPA grain seeder was used for sowing long flax of the Kamenyar variety. Simultaneously with the sowing of flax seeds, local application of mineral fertilizers (nitroammophoska 2 c/ha) was carried out. The application of conservation tillage allows to obtain the yield of flax trust at the level of 3,5 t/ha, which is 0,4 t/ha (12.9 %) more than from the area of traditional tillage and 0,7 t/ha (25 %) in comparison with mulching. In the area with canning treatment, the seed yield was the highest and amounted to 0,64 t/ha. The difference between this option and traditional and mulching tillage reaches 0,06 t/ha (10,3 %) and 0.10 t/ha (18.5 %), respectively. Conclusions. Preservation tillage, which is based on shelf-free tillage to a depth of 40 cm and disking to a depth of 15 cm has a positive effect on plant growth and development, yield and quality of flax.

Drip Irrigation and Stand Establishment Affect Yield and Quality of Cantaloupe

HortScience ◽  
1998 ◽  
Vol 33 (3) ◽  
pp. 545d-545
Author(s):  
D.I. Leskovar ◽  
J.C. Ward ◽  
R.W. Sprague ◽  
A. Meiri
Keyword(s):  
Field Experiments ◽  
Irrigation System ◽  
Fruit Size ◽  
Growth Yield ◽  
Vegetable Production ◽  
Silty Clay ◽  
Dry Land ◽  
Stand Establishment ◽  
Yield And Quality

Water pumping restrictions of high-quality irrigation water from underground aquifers is affecting vegetable production in Southwest Texas. There is a need to develop efficient deficit-irrigation strategies to minimize irrigation inputs and maintain crop profitability. Our objective was to determine how growth, yield, and quality of cantaloupe (Cucumis melo L. cv. `Caravelle') are affected by irrigation systems with varying input levels, including drip depth position and polyethylene mulch. Stand establishment systems used were containerized transplants and direct seeding. Field experiments were conducted on a Uvalde silty clay loam soil. Marketable yields increased in the order of pre-irrigation followed by: dry-land conditions, furrow/no-mulch, furrow/mulch, drip-surface (0 cm depth)/mulch, drip-subsurface (10-cm depth)/mulch, and drip-subsurface (30 cm depth)/mulch. Pooled across all drip depth treatments, plants on drip had higher water use efficiency than plants on furrow/no-mulch or furrow/mulch systems. Transplants with drip-surface produced 75% higher total and fruit size No. 9 yields than drip-subsurface (10- or 30-cm depth) during the first harvest, but total yields were unaffected by drip tape position. About similar trends were measured in a subsequent study except for a significant irrigation system (stand establishment interaction for yield. Total yields were highest for transplants on drip-subsurface (10-cm depth) and direct seeded plants on drip-subsurface (10 and 30 cm depth) with mulch.

The system of indicators of the quality of the carbon-carbon composite materials and technologies of their production

2018 ◽  
pp. 127-132
Author(s):  
T. N. Antipova ◽  
D. S. Shiroyan
Keyword(s):  
Composite Material ◽  
Low Cost ◽  
Experimental Studies ◽  
Carbon Matrix ◽  
Carbon Composite ◽  
Optimal Number ◽  
Laboratory Equipment ◽  
Carbon Composite Material ◽  
Carbon Composite Materials

The system of indicators of quality of carbon-carbon composite material and technological operations of its production is proved in the work. As a result of the experimental studies, with respect to the existing laboratory equipment, the optimal number of cycles of saturation of the reinforcing frame with a carbon matrix is determined. It was found that to obtain a carbon-carbon composite material with a low cost and the required quality indicators, it is necessary to introduce additional parameters of the pitch melt at the impregnation stage.

Concentration of Impurities during Melting of Snow Made from Secondary Sewage Effluent

1986 ◽  
Vol 18 (2) ◽  
pp. 151-156 ◽  
Author(s):  
R. Zapf-Gilje ◽  
S. O. Russell ◽  
D. S. Mavinic
Keyword(s):  
Potassium Chloride ◽  
Chloride Solution ◽  
Laboratory Experiments ◽  
Field Experiments ◽  
Low Cost ◽  
Sewage Effluent ◽  
Potassium Chloride Solution ◽  
Laboratory Results ◽  
Solution Field ◽  
Concentration Of Impurities

When snow is made from sewage effluent, the impurities become concentrated in the early melt leaving the later runoff relatively pure. This could provide a low cost method of separating nutrients from secondary sewage effluent. Laboratory experiments showed that the degree of concentration was largely independent of the number of melt freeze cycles or initial concentration of impurity in the snow. The first 20% of melt removed with it 65% of the phosphorus and 90% of the nitrogen from snow made from sewage effluent; and over 90% of potassium chloride from snow made from potassium chloride solution. Field experiments with a salt solution confirmed the laboratory results.

scholarly journals Creation of a specific and separated pediatric intra-hospital pathway in primary level hospitals during the era of COVID-19

2021 ◽  
Vol 19 ◽  
pp. 205873922110108
Author(s):  
Marco Manfredi ◽  
Pietro Ragni ◽  
Giancarlo Gargano
Keyword(s):  
Quality Of Care ◽  
Severe Acute Respiratory Syndrome ◽  
Healthcare Workers ◽  
Health Agency ◽  
Local Health ◽  
Primary Level ◽  
Level Hospital ◽  
Rule Out

Every new pandemic forces us to start new specific behaviors both in the civil life and within the hospitals trying to contain the spreading of the infection and preserve the more fragile people. In this regard, at the debut of Severe Acute Respiratory Syndrome-CoronaVirus-2 (SARS-CoV-2) pandemic, our Local Health Agency had drastically modified every clinical and organizational pathways in order to limit the diffusion of the infection as well as to maintain a good quality of care and preserve healthcare workers. We report how we have modified the usual pediatric intra-hospital pathways in our primary level hospital to avoid mixing children with suspected and non-suspected symptoms of SARS-CoV-2 infection. Before every hospitalization, regardless of symptoms, each child and him/her parent/caregiver are undergone to rapid antigenic and molecular swab to rule out a SARS-CoV-2 infection; hence, positive patients are transferred to Pediatric Unit of third level hospital equipped by a Pediatric COVID Intensive Unit. We think the healthcare behaviors described in this manuscript can help to reduce the intra-hospital spreading of SARS-CoV-2, although children seem to have a minimal role in the dissemination, but we cannot let down your guard. Simultaneously we observed that the overall children requiring inpatient pediatric evaluation and hospitalization have dramatically decreased from the beginning of pandemic.

scholarly journals Diagnostic Capabilities of a Smartphone- Based Low-Cost Microscope

2020 ◽  
Vol 6 (3) ◽  
pp. 522-525
Author(s):  
Dorina Hasselbeck ◽  
Max B. Schäfer ◽  
Kent W. Stewart ◽  
Peter P. Pott
Keyword(s):  
Low Cost ◽  
Field Of View ◽  
Parasitic Diseases ◽  
Optical Parameters ◽  
Trade Off ◽  
Resource Limited ◽  
Wide Range ◽  
Diagnostic Applications ◽  
Diagnostic Capabilities

AbstractMicroscopy enables fast and effective diagnostics. However, in resource-limited regions microscopy is not accessible to everyone. Smartphone-based low-cost microscopes could be a powerful tool for diagnostic and educational purposes. In this paper, the imaging quality of a smartphone-based microscope with four different optical parameters is presented and a systematic overview of the resulting diagnostic applications is given. With the chosen configuration, aiming for a reasonable trade-off, an average resolution of 1.23 μm and a field of view of 1.12 mm2 was achieved. This enables a wide range of diagnostic applications such as the diagnosis of Malaria and other parasitic diseases.

Sign in / Sign up

Export Citation Format

Share Document