Health Risk Assessment of Dermal Exposure to Heavy Metals Content of Chemical Hair Dyes

2019 ◽  
Author(s):  
Fariba KHALILI ◽  
Amir Hossein MAHVI ◽  
Simin NASSERI ◽  
Masood YUNESIAN ◽  
Mehdi YASERI ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Risk Assessment ◽  
Heavy Metal ◽  
Hazard Quotient ◽  
Hair Dyes ◽  
Icp Ms ◽  
Metal Contents ◽  
Carcinogenic Effects ◽  
Two Indices ◽  
Level Of Risk

Background: Contamination of hair dyes to heavy metals can threaten consumer's health. We investigated the concentrations of some important heavy metals in hair dyes and evaluates their non-carcinogenic effects. Methods: The most commonly used hair dyes were determined through questioners and 32 samples were collected from the market of Tehran in 2014. The concentration of 10 heavy metals (Fe, Ag, Co, Cr, Mn, Ba, Cd, Cu, Pb, and Al) was determined using ICP-MS. Based on the obtained data from distributed questionnaires and Monte Carlo simulation, the exposure to the evaluated heavy metals was estimated. Besides, using hazard quotient (HQ) and chronic hazard (HI), the risk of non-carcinogenic effects of investigated hair dyes consumption was specified. Results: Results indicated the average concentrations of Al, Ba, and Fe as 0.54, 0.86, and 1.19 mg kg-1 and those of Cd, Cu, and Pb as 0.45, 61.32, and 185.34 µg kg-1, respectively. Pb with HQ of 7.46e-4 had the highest risk and Fe with HQ of 3.4e-6 had the lowest level of risk. Among the investigated dyes, the ones made by Iran (HI=2.8e-4) and the dark brown color (HI=1.93e-4) had the highest level of risk among all the studied samples. Conclusion: Two indices of HI and HQ showed that heavy metal contents in the investigated samples had not probable non-carcinogenic risks for the consumers of these products.

scholarly journals Spatial Connections between Microplastics and Heavy Metal Pollution within Floodplain Soils

2022 ◽  
Vol 12 (2) ◽  
pp. 595
Author(s):  
Collin J. Weber ◽  
Jens Hahn ◽  
Christian Opp
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Wide Distribution ◽  
Soil Material ◽  
Statistical Correlations ◽  
Floodplain Soils ◽  
Icp Ms ◽  
Metal Contents ◽  
Sediment Layers ◽  
Deposition Conditions

Soils contain an increasing number of different pollutants, which are often released into the environment by human activity. Among the “new” potential pollutants are plastics and microplastics. “Recognized” pollutants such as heavy metals, of geogenic and anthropogenic origin, now meet purely anthropogenic contaminants such as plastic particles. Those can meet especially in floodplain landscapes and floodplain soils, because of their function as a temporary sink for sediments, nutrients, and pollutants. Based on a geospatial sampling approach, we analyzed the soil properties and heavy metal contents (ICP-MS) in soil material and macroplastic particles, and calculated total plastic concentrations (Ptot) from preliminary studies. Those data were used to investigate spatial connections between both groups of pollutants. Our results from the example of the Lahn river catchment show a low-to-moderate contamination of the floodplain soils with heavy metals and a wide distribution of plastic contents up to a depth of two meters. Furthermore, we were able to document heavy metal contents in macroplastic particles. Spatial and statistical correlations between both pollutants were found. Those correlations are mainly expressed by a comparable variability in concentrations across the catchment and in a common accumulation in topsoil and upper soil or sediment layers (0–50 cm). The results indicate comparable deposition conditions of both pollutants in the floodplain system.

scholarly journals Health Risk Assessment of Heavy Metals in Traditional Cosmetics Sold in Tunisian Local Markets

2016 ◽  
Vol 2016 ◽  
pp. 1-12 ◽  
Author(s):  
Mohamed Anouar Nouioui ◽  
Salah Mahjoubi ◽  
Asma Ghorbel ◽  
Marouen Ben Haj Yahia ◽  
Dorra Amira ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Risk Assessment ◽  
Heavy Metal ◽  
Health Risk ◽  
Atomic Absorption ◽  
Good Manufacturing Practice ◽  
Potential Threat ◽  
Analytical Test ◽  
Metal Contents ◽  
Cu And Zn

This study was undertaken in order to determine heavy metal contents in twelve (n=12) henna brands and eleven (n=11) kohl products. An analytical test was performed for Pb, Cd, Cu, and Zn in henna and kohl products using atomic absorption spectrophotometery. The overall mean concentrations of heavy metals in henna varied between 1.2 and 8.9 μg g−1 for Pb; 0.8 and 18.6 μg g−1 for Cd; 0.5 μg g−1 and 3.3 μg g−1 for Cu; and 3.7 μg g−1 and 90.0 μg g−1 for Zn. As for kohl products, Pb concentrations ranged between 51.1 μg g−1 and 4839.5 μg g−1, Cd concentrations ranged between 1.0 μg g−1 and 158.6 μg g−1, Cu concentrations ranged between 2.5 μg g−1 and 162.5 μg g−1, and Zn concentrations ranged between 0.7 μg g−1 and 185.0 μg g−1. The results of our study revealed that Pb, Cd, Cu, and Zn contents in investigated samples were high, making from the prolonged use of such products a potential threat to human health. Therefore, major quality controls are recommended in order to enforce acceptable limits of potential contaminants in cosmetics and good manufacturing practice.

scholarly journals Potential Human Health Risks Assessment through Determination of Heavy Metal Contents in Regularly Consumed Yogurts in Bangladesh

2021 ◽  
Vol 18 (3) ◽  
pp. 603-610
Author(s):  
GMM Anwarul Hasan ◽  
Mohammed A. Satter ◽  
Anuj Kumer Das
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Health Risks ◽  
Hazard Quotient ◽  
Daily Intake ◽  
Carcinogenic Risk ◽  
Target Hazard Quotient ◽  
Metal Contents ◽  
Health Risks Assessment ◽  
Risks Assessment

This study estimated the concentrations of heavy metals in regularly consumed sour, sweet and homemade traditional yogurts in Bangladesh. A total of 300 yogurt samples (sour, sweet and homemade traditional); 100 yogurt samples of each category were considered for this assay. To assess the health risks, the daily yogurt consumption rate and the value of target carcinogenic and non-carcinogenic risks of these yogurt samples were also determined. In sour yogurt samples, detected heavy metal contents were 0.398±0.121 mg/kg, 0.774±0.372 mg/kg, 0.087±0.021 mg/kg, 0.131±0.026 mg/kg, 0.011±0.006 mg/kg, 0.031±0.005 mg/kg, 0.445±0.267 mg/kg and 0.029±0.024 mg/kg while in sweet yogurt samples, detected heavy metal contents were 0.410±0.146 mg/kg, 0.704±0.324 mg/kg, 0.082±0.028 mg/kg, 0.146±0.025 mg/kg, 0.010±0.005 mg/kg, 0.030±0.007 mg/kg, 0.460±0.265 mg/kg, and 0.035±0.026 mg/kg and in homemade traditional yogurt samples, detected heavy metal contents were 0.410±0.147 mg/kg, 1.502±0.367 mg/kg, 0.085±0.020 mg/kg, 0.120±0.024 mg/kg, 0.011±0.005 mg/kg, 0.020±0.005 mg/kg, 0.251±0.174 mg/kg and 0.025±0.021 mg/Kg for Iron (Fe), Copper (Cu), Manganese (Mn), Zinc (Zn), Lead (Pb), Cadmium (Cd), Chromium (Cr) and Arsenic (As) respectively. Among the analyzed heavy metals, highest concentration of Cu and lowest concentration of Pb was detected in all yogurt types. The values of estimated daily intake (EDI), Target hazard quotient (THQ), Total THQ (TTHQ) and Target Carcinogenic risk (TCR) confirmed that, there have no chances of any kind of carcinogenic and non-carcinogenic risks from these yogurt samples.

Concentrations and related health risk assessment of pesticides, phthalates and heavy metals in strawberry from Shanghai, China

2021 ◽  
Author(s):  
Wan-ce Shao ◽  
Yang-yang Zang ◽  
Hai-yao Ma ◽  
Ye Ling ◽  
Zhen-peng Kai
Keyword(s):  
Heavy Metals ◽  
Risk Assessment ◽  
Heavy Metal ◽  
Health Risk ◽  
Limit Of Detection ◽  
Hazard Quotient ◽  
Daily Intake ◽  
Hazard Index ◽  
Target Hazard Quotient ◽  
Pesticides Residues

In the present study, a risk assessment of pesticides, phthalates and heavy metals in strawberries (n = 335) in recent years was conducted by determining the out estimate dietary intake (EDI), target hazard quotient (THQ) and hazard index (HI) . 128 Pesticides, 18 phthalates and 3 heavy metals were determined in this determination. 51 pesticide residues were detected in the strawberry samples, and 97.91% samples had levels of at least one of the 51 pesticides above the LOD (limit of detection). 2.39% of samples had pesticides higher than the Chinese MRL. Multiple pesticides residues were detected in most samples. Bis-2-ethylhexyl phthalate (DEHP), diisobutyl phthalate (DIBP) and dibutyl phthalate (DBP) were detected in the strawberry samples with high frequency of detection. Their detectable rates were 100, 100 and 89.9%, respectively. Most of the samples were detected lead (Pb), cadmium (Cd) and nickel (Ni) with the detectable rates 75.76, 92.93 and 92.93%, respectively. Estimated daily intake of analyzed pesticide, phthalate and heavy metal residues appear to be relatively low compared to the ADI. The average THQs and HI were less than one. That means the customers who are exposed to the average contaminants levels may not pose significant health risk. Our results show that the strawberries may be polluted by many kinds of contaminants. Therefore, monitoring of pesticides, phthalates and heavy metal residues in strawberries should be increasingly developed in order to fully protect the health of the consumer.

scholarly journals Heavy-Metal Contents and the Impact of Roasting on Polyphenols, Caffeine, and Acrylamide in Specialty Coffee Beans

Foods ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 1310
Author(s):  
Matúš Várady ◽  
Sylwester Ślusarczyk ◽  
Jana Boržíkova ◽  
Katarína Hanková ◽  
Michaela Vieriková ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Dry Matter ◽  
Green Beans ◽  
Caffeoylquinic Acids ◽  
Coffee Beans ◽  
Metal Contents ◽  
Specialty Coffee ◽  
Quantitative Analyses ◽  
The Impact

The aim of this study was to determine the effect of roasting on the contents of polyphenols (PPH), acrylamide (AA), and caffeine (CAF) and to analyze heavy metals in specialty coffee beans from Colombia (COL) and Nicaragua (NIC). Samples of NIC were naturally processed and COL was fermented anaerobically. Green beans from COL (COL-GR) and NIC (NIC-GR) were roasted at two levels, light roasting (COL-LIGHT and NIC-LIGHT) and darker roasting (COL-DARK and NIC-DARK), at final temperatures of 210 °C (10 min) and 215 °C (12 min), respectively. Quantitative analyses of PPH identified caffeoylquinic acids (CQA), feruloylquinic acids, and dicaffeoylquinic acids. Isomer 5-CQA was present at the highest levels and reached 60.8 and 57.7% in COL-GR and NIC-GR, 23.4 and 29.3% in COL-LIGHT and NIC-LIGHT, and 18 and 24.2% in COL-DARK and NIC-DARK, respectively, of the total PPH. The total PPH contents were highest in COL-GR (59.76 mg/g dry matter, DM). Roasting affected the contents of PPH, CAF, and AA (p < 0.001, p < 0.011 and p < 0.001, respectively). Nickel and cadmium contents were significantly higher in the COL-GR than in the NIC-GR beans. Darker roasting decreased AA content, but light roasting maintained similar amounts of CAF and total PPH.

scholarly journals Environmental Risk Assessment of Petroleum Activities in Surface Sediments, Suez Gulf, Egypt

2021 ◽  
Vol 9 (5) ◽  
pp. 473
Author(s):  
Magda M. Abou El-Safa ◽  
Mohamed Gad ◽  
Ebrahem M. Eid ◽  
Ashwaq M. Alnemari ◽  
Mohammed H. Almarshadi ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Risk Assessment ◽  
Heavy Metal ◽  
Surface Sediment ◽  
Surface Sediments ◽  
Surf Zone ◽  
Risk Index ◽  
Negative Relationship ◽  
Anthropogenic Sources ◽  
Suez Gulf

The present study focuses on the risk assessment of heavy metal contamination in aquatic ecosystems by evaluating the current situation of heavy metals in seven locations (North Amer El Bahry, Amer, Bakr, Ras Gharib, July Water Floud, Ras Shokeir, and El Marageen) along the Suez Gulf coast that are well-known representative sites for petroleum activities in Egypt. One hundred and forty-six samples of surface sediments were carefully collected from twenty-seven profiles in the intertidal and surf zone. The hydrochemical parameters, such as pH and salinity (S‰), were measured during sample collection. The mineralogy study was carried out by an X-ray diffractometer (XRD), and the concentrations of Al, Mn, Fe, Cr, Cu, Co, Zn, Cd, and Pb were determined using inductively coupled plasma mass spectra (ICP-MS). The ecological risks of heavy metals were assessed by applying the contamination factor (CF), enrichment factor (EF), geoaccumulation index (Igeo), pollution load index (PLI), and potential ecological risk index (RI). The mineralogical composition mainly comprised quartz, dolomites, calcite, and feldspars. The average concentrations of the detected heavy metals, in descending order, were Al > Fe > Mn > Cr > Pb > Cu > Zn > Ni > Co > Cd. A non-significant or negative relationship between the heavy metal concentration in the samples and their textural grain size characteristics was observed. The coastal surface sediment samples of the Suez Gulf contained lower concentrations of heavy metals than those published for other regions in the world with petroleum activities, except for Al, Mn, and Cr. The results for the CF, EF, and Igeo showed that Cd and Pb have severe enrichment in surface sediment and are derived from anthropogenic sources, while Al, Mn, Fe, Cr, Co, Ni, Cu, and Zn originate from natural sources. By comparison, the PLI and RI results indicate that the North Amer El Bahry and July Water Floud are considered polluted areas due to their petroleum activities. The continuous monitoring and assessment of pollutants in the Suez Gulf will aid in the protection of the environment and the sustainability of resources.

Assessing Soil and Plant Pollution by Abandoned Rural Waste Dumping Sites in Ningbo, China

2011 ◽  
Vol 138-139 ◽  
pp. 1149-1155 ◽  
Author(s):  
Yi Dong Guan ◽  
Ye Hong Du ◽  
Zhen Dong Li ◽  
An Cheng Luo
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Reference Value ◽  
Dry Weight ◽  
Rice Grain ◽  
Contamination Assessment ◽  
Plant Parts ◽  
Metal Contents ◽  
Plant Pollution

This paper reports the concentration of heavy metals (Cr, Cu, Zn, Cd and Pb) in the soils and rices surrounding the abandoned rural waste dumping sites in Ningbo. Igeo (geoaccumulation index) was calculated to assess the contamination degree of heavy metals in soils. The mean contents of Cr, Cu, Cd, Zn and Pb of soils were 33.3, 24.1, 1.5, 118.9 and 45.6 mg/(kg DW) (dry weight), respectively. All of them were much higher than that of the reference value (i.e. CK), but there were no coherent trend of the metal contents within 1-120m distance from the dumping site. Igeo of heavy metals reveals the order of Cd>Cu>Cr>Pb>Zn, and the contamination assessment of soils using Igeo indicate the moderate Cd pollution, while the soils were unpolluted-moderately overall by Cr, Cu, Zn as well as Pb. The heavy metal contents in root, stem & leaf and rice grains were all remarkable higher than that of the CK at 20-120 m distances, and the heavy metal contents in root were evidently much higher than other plant parts, while those in rice grain were lowest, indicating the great bioaccumulation trend of heavy metals. Although the metal contents in the rice grain were within the legislation limit, its bioaccumulation trend of heavy metals was remarkable, whose contents were 4.38-fold for Cr, 1.76-fold for Cu, 1.28-fold for Zn, 2.67-fold for Cd and 3.03-fold for Pb higher than that of reference value, respectively. Finally, we proposed a decentralized in-situ restoration approach for the dumping sites.

Heavy metal and essential elements in beers from turkey market: A risk assessment study

2021 ◽  
pp. 096032712199321
Author(s):  
M Charehsaz ◽  
S Helvacıoğlu ◽  
S Çetinkaya ◽  
R Demir ◽  
O Erdem ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Inductively Coupled Plasma ◽  
Hazard Quotient ◽  
Daily Intake ◽  
Hazard Index ◽  
Carcinogenic Risk ◽  
Essential Elements ◽  
Inductively Coupled ◽  
Multiple Heavy Metals

In this study, the level of arsenic (As), lead (Pb) and cadmium (Cd) and also essential elements in beer samples consumed in Turkey were investigated using the inductively coupled plasma mass spectrometry (ICP-MS) method. The heavy metal-induced non-carcinogenic and carcinogenic risks were calculated. For essential elements, the calculated estimated daily intake of iron (Fe), copper (Cu), selenium (Se) and cobalt (Co) from beer consumption were compared with their toxicity reference values. Tukey post-hoc test showed that As was found at a significantly higher level when compared to Pb. Also, a significant correlation was found between As level and alcohol by volume percent. All samples had a hazard quotient and hazard index <1, indicating no non-carcinogenic risk from exposure to single or multiple heavy metals. Some samples exceeded the threshold limit of acceptable cancer risk for As in the high beer consumer group. This assessment showed that in addition to health implications based on the alcohol content of beer, there might be a carcinogenic risk associated with the heavy metals content of these beverages.

scholarly journals Erkenez Çayı’nda (Kahramanmaraş) Süt Ürünleri, Boya ve Tekstil Fabrikası Atık Sularından Kaynaklanan Ağır Metal Kirliliğinin Belirlenmesi

2019 ◽  
Vol 7 (11) ◽  
pp. 1858
Author(s):  
Özgür Canpolat ◽  
Ece Vanlı
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Metal Pollution ◽  
Heavy Metal Pollution ◽  
Quality Criteria ◽  
Water Quality Criteria ◽  
Milk Products ◽  
Metal Contents ◽  
Considerable Impact ◽  
Textile Factory

Industries, as a source of pollution, have a considerable impact on aquatic ecosystems due to the diversity in the composition of their wastewater. In this study, it is aimed to determine the heavy metal pollution caused by the wastewater of milk products factory, paint factory and textile factory in the Organized Industrial Zone of Kahramanmaraş province. For this purpose, seasonal concentrations of some heavy metals (Fe, Cu, Zn, Cr, Ni, Cd, As and Hg) have been determined in wastewaters of milk products factory, paint factory and textile factory and in the region where these wastewaters discharge in the Erkenez Stream. The seasonal variation of heavy metals in all stations, generally the lowest concentrations of all elements were determined in winter and the highest concentrations were determined in summer. When the heavy metal contents of milk products factory, paint factory and textile factory wastewaters were compared, the highest values were found in textile factory wastewater. When all stations are taken into consideration, according to USEPA and water quality criteria, it is determined that the wastewaters of milk products factory, paint factory and textile factory and the area of the Erkenez Stream, where these wastewaters are discharged, were very dirty in term of heavy metals. When these results are taken into consideration, it is clear that the wastewater of these factories causes serious heavy metal pollution in the Erkenez Stream.

Sign in / Sign up

Export Citation Format

Share Document