scholarly journals LIGHTING CONCRETE PRODUCTION FEATURES AND PROSPECTS OF APPLICATION IN RAILWAY CONSTRUCTION

2021 ◽  
pp. 51-59
Author(s):  
Pavel Vladimirovich Kovtun ◽  
Konstantin Sergeevich Razvodov
Keyword(s):  
New Technologies ◽  
Polymeric Materials ◽  
Raw Material ◽  
Traffic Light ◽  
Railway Construction ◽  
Railway Infrastructure ◽  
Concrete Production ◽  
The Republic ◽  
Free Environment ◽  
The Cost

The prospect of light-conducting concrete in railway construction is associated with an increase in recent years in interest in creating a barrier-free environment, including at railway stations, platforms, pedestrian crossings, in pedestrian tunnels, and so on. The material makes it possible to duplicate marking elements in hazardous areas of passenger movement at night without breaking the material environment, which will facilitate care for it in the winter. When creating innovative pedestrian crossings (equipped with interactive lanes that duplicate the traffic light for pedestrians), the use of light-conducting concrete will increase the antivandistance of the engineering arrangement. Unlike polymeric materials, the litracon material considered in the article does not change its properties under the influence of high temperatures, is not susceptible to instantaneous violation of the integrity and loss of surface properties under mechanical stresses. The high cost of the material does not yet allow its widespread use in the construction of railway infrastructure facilities on an industrial scale, however, with an increase in the production of optical fiber (the most expensive component of light-conducting concrete) and the search for new technologies that reduce the cost of its production, a drop in prices for this type of raw material is naturally expected. One of the areas of application of light-conducting concrete can be transport construction and landscaping of on-site territories (sidewalks, stairs, platforms) in terms of increasing their interactivity in the dark. The article proposes a composition (No. 1) corresponding to the compressive strength and tensile strength when bending, the requirements for products used in railway construction, for which light-conductive concrete can be used. The problem of light-transmitting concrete in the maintenance of railway infrastructure in the Republic of Belarus is being raised for the first time

scholarly journals Vegetable milks and their fermented derivative products

2014 ◽  
Vol 3 (1) ◽  
Author(s):  
Neus Bernat ◽  
Maite Cháfer ◽  
Amparo Chiralt ◽  
Chelo González-Martínez
Keyword(s):  
New Technologies ◽  
Physical Stability ◽  
Raw Material ◽  
Optimal Processing ◽  
Main Challenge ◽  
Feasible Solutions ◽  
Nutritional Benefits ◽  
The Cost ◽  
Derivative Products

The so-called vegetable milks are in the spotlight thanks to their lactose-free, animal protein-free and cholesterol-free features which fit well with the current demand for healthy food products. Nevertheless, and with the exception of soya, little information is available about these types of milks and their derivatives. The aims of this review, therefore, are to: highlight the main nutritional benefits of the nut and cereal vegetable milks available on the market, fermented or not; describe the basic processing steps involved in their manufacturing process; and analyze the major problems affecting their overall quality, together with the current feasible solutions. On the basis of the information gathered, vegetable milks and their derivatives have excellent nutritional properties which provide them a high potential and positive market expectation. Nevertheless, optimal processing conditions for each raw material or the application of new technologies have to be researched in order to improve the quality of the products. Hence, further studies need to be developed to ensure the physical stability of the products throughout their whole shelf-life. These studies would also allow for a reduction in the amount of additives (hydrocolloids and/or emulsifiers) and thus reduce the cost of the products. In the particular case of fermented products, the use of starters which are able to both improve the quality (by synthesizing enhanced flavors and providing optimal textures) and exert health benefits for consumers (i.e. probiotics) is the main challenge to be faced in future studies.

scholarly journals Vegetable milks and their fermented derivative products

2014 ◽  
Vol 3 (1) ◽  
Author(s):  
Neus Bernat ◽  
Maite Cháfer ◽  
Amparo Chiralt ◽  
Chelo González-Martínez
Keyword(s):  
New Technologies ◽  
Physical Stability ◽  
Raw Material ◽  
Optimal Processing ◽  
Main Challenge ◽  
Feasible Solutions ◽  
Nutritional Benefits ◽  
The Cost ◽  
Derivative Products

The so-called vegetable milks are in the spotlight thanks to their lactose-free, animal protein-free and cholesterol-free features which fit well with the current demand for healthy food products. Nevertheless, and with the exception of soya, little information is available about these types of milks and their derivatives. The aims of this review, therefore, are to: highlight the main nutritional benefits of the nut and cereal vegetable milks available on the market, fermented or not; describe the basic processing steps involved in their manufacturing process; and analyze the major problems affecting their overall quality, together with the current feasible solutions. On the basis of the information gathered, vegetable milks and their derivatives have excellent nutritional properties which provide them a high potential and positive market expectation. Nevertheless, optimal processing conditions for each raw material or the application of new technologies have to be researched in order to improve the quality of the products. Hence, further studies need to be developed to ensure the physical stability of the products throughout their whole shelf-life. These studies would also allow for a reduction in the amount of additives (hydrocolloids and/or emulsifiers) and thus reduce the cost of the products. In the particular case of fermented products, the use of starters which are able to both improve the quality (by synthesizing enhanced flavors and providing optimal textures) and exert health benefits for consumers (i.e. probiotics) is the main challenge to be faced in future studies.

Resource efficiency in deinked pulp production: a review

TAPPI Journal ◽  
2014 ◽  
Vol 13 (11) ◽  
pp. 37-43 ◽  
Author(s):  
LIISA KOTANEN ◽  
MIKA KÖRKKÖ ◽  
ARI ÄMMÄLÄ ◽  
JOUKO NIINIMÄKI
Keyword(s):  
Waste Disposal ◽  
Resource Efficiency ◽  
Raw Material ◽  
Ecological Strategy ◽  
Recycled Paper ◽  
Paper Production ◽  
Recycled Pulp ◽  
Current State ◽  
The Cost ◽  
Pulp Production

The use of recovered paper as a raw material for paper production is by far the most economical and ecological strategy for the disposal of waste paper. However, paper production from recovered paper furnish generates a great amount of residues, and the higher the demand requirements for the end product, the higher the amount of rejected material. The reason for this is that the selectivity of the deinking process is limited; therefore, some valuable components are also lost in reject streams. The rejection of usable components affects the economics of recycled paper production. As the cost of waste disposal continues to increase, this issue is becoming more and more severe. This paper summarizes the current state of the resource efficiency in recycled pulp production and provides information on the volumes of rejected streams and the usable material within them. Various means to use these reject streams are also discussed, including the main findings of a recent thesis by the main author. This review summarizes current internal and external use of reject streams generated in the deinking operations.

SELISIH BIAYA PRODUKSI SEBAGAI ALAT PENGENDALIAN MANAJEMEN PT INDO PUSAKA BERAU

2019 ◽  
Vol 3 (02) ◽  
pp. 397
Author(s):  
SAFITRI NURHIDAYATI ◽  
RIZKI AMELYA SYAM
Keyword(s):  
Raw Materials ◽  
Field Research ◽  
Analytical Tool ◽  
Production Costs ◽  
Raw Material ◽  
Labor Costs ◽  
Material Costs ◽  
Library Research ◽  
The Difference ◽  
The Cost

This study aims to analyze whether the difference that occurs in the cost of raw materials, direct labor, and factory overhead costs between the standard costs and the actual costs in PLTU LATI is a difference that is favorable or unfavorable. Data collection techniques with field research and library research. The analytical tool used is the analysis of the difference in raw material costs, the difference in direct labor costs and the difference in factory overhead costs. The hypothesis in this study is that the difference allegedly occurs in the cost of raw materials, direct labor costs, and factory overhead costs at PT Indo Pusaka Berau Tanjung Redeb is a favorable difference. The results showed that the difference in the cost of producing MWh electricity at PT Indo Pusaka Berau Tanjung Redeb in 2018, namely the difference in the price of raw material costs Rp. 548,029.80, - is favorable, the difference in quantity of raw materials is Rp. 957,216,602, - is (favorable) , the difference in direct labor costs Rp 2,602,642,084, - is (unfavorable), and the difference in factory overhead costs Rp 8,807,051,422, - is (favorable) This shows that the difference in the overall production cost budget is favorable or profitable. This beneficial difference shows that the company is really able to reduce production costs optimally in 2018.  

New technologies of meat raw material preparation in production of uncooked smoked sausages

Vsyo o myase ◽  
1918 ◽  
pp. 44-47
Author(s):  
V.V. Nasonova ◽  
◽  
A.A. Motovilina ◽  
E.K. Tunieva ◽  
T.G. Kuznetsova ◽  
...  
Keyword(s):  
New Technologies ◽  
Raw Material ◽  
Material Preparation

Highly Active Modified Variants of Recombinant Phospholipase А2 from Streptomyces violaceoruber for Effective Biosynthesis in Yeasts

2019 ◽  
pp. 30-41 ◽  
Author(s):  
E.P. Sannikova ◽  
A.V. Malysheva ◽  
F.A. Klebanov ◽  
D.G. Kozlov
Keyword(s):  
New Technologies ◽  
Specific Activity ◽  
Point Mutations ◽  
Egg Yolk ◽  
Enzyme Preparations ◽  
Highly Active ◽  
High Calcium ◽  
Pla2 Enzyme ◽  
Streptomyces Violaceoruber ◽  
The Cost

The capacity of yeast to produce the highly active variants of PLA2 has been confirmed. The high-active variants were based on the original enzyme from the strain А-2688 of Streptomyces violaceoruber. To reduce the enzyme toxicity and to increase its expression, various approaches were tested including point mutations, construction of artificial N- and/or C-end pro-regions, hybridization with other proteins and engineering or inactivation of glycosylation sites. As a main result, the modified PLA2 enzymes were obtained which have the same secretion level as their low-active predecessors, but specific activity of which was at least tenfold higher. As the main feature, the selected mutants were characterized by a lower affinity for Ca2+ that probably accounts for their low toxicity (and high expression capacity) at the stage of biosynthesis and their ability to activate under special conditions, e.g. during the egg yolk fermentation. The data obtained can provide a basis for the cost reduction of highly active PLA2 enzyme preparations in industries where the application of high calcium concentrations is allowed. recombinant phospholipase А2, Streptomyces violaceoruber, yeasts, secretion, producer strain The work was initiated by the Innovation Center Biriuch - New Technologies, Ltd., and was supported within the framework of the State Assignment no. 595-00004-18 PR.

Coordination of technology of railway operation of the Republic of Tajikistan and organization of railways in international traffic

2018 ◽  
Vol 77 (4) ◽  
pp. 211-217 ◽  
Author(s):  
P. N. Pulatov
Keyword(s):  
Rolling Stock ◽  
Railway Transport ◽  
Transport Services ◽  
Railway Infrastructure ◽  
External Conditions ◽  
The Republic ◽  
Railway Operation ◽  
Required Quality

Current geopolitical and economic conditions for the functioning of railway transport in most post-Soviet states are such that it is extremely difficult to provide required quality of transport services and break-even operations at high expenses for maintaining the railway infrastructure and rolling stock. Dynamics of transportation of the Tajik Railway (TSR) is shown, which displays that most of its sections are classified as low-intensity ones. The paper proposes methodical principles, setting and qualitative analysis of the task of rationalization of operational work and organization of car flows for international transportation, taking into account the specifics of the Tajik Railway. There is a problem of complex maintenance of the efficiency of operational work in modern conditions based on the synthesis of the tasks of self-management (rational internal operational technology of the Tajik Railway) and coordination tasks (technological interaction with railway administrations of other states). Author substantiated the necessity of solving this problem. Proposed classification of technological restrictions and controlled variables in the performance of transport takes into account methods for changing external conditions for the functioning of the railway landfill and methods for increasing internal efficiency of its operation. The search for the solution of the problem involves direct search of variants along its ordered set with clipping of groups of variants that do not correspond to constraints, with the subsequent finding of compromise control over a set of effective alternatives.

scholarly journals Design and Adoption of Low-Cost Point-of-Care Diagnostic Devices: Syrian Case

Micromachines ◽  
2021 ◽  
Vol 12 (8) ◽  
pp. 882
Author(s):  
M. Munzer Alseed ◽  
Hamzah Syed ◽  
Mehmet Cengiz Onbasli ◽  
Ali K. Yetisen ◽  
Savas Tasoglu
Keyword(s):  
Civil Wars ◽  
Healthcare Workers ◽  
New Technologies ◽  
Point Of Care ◽  
Low Cost ◽  
Healthcare Services ◽  
Efficient Solutions ◽  
Humanitarian Crises ◽  
Technology Experience ◽  
The Cost

Civil wars produce immense humanitarian crises, causing millions of individuals to seek refuge in other countries. The rate of disease prevalence has inclined among the refugees, increasing the cost of healthcare. Complex medical conditions and high numbers of patients at healthcare centers overwhelm the healthcare system and delay diagnosis and treatment. Point-of-care (PoC) testing can provide efficient solutions to high equipment cost, late diagnosis, and low accessibility of healthcare services. However, the development of PoC devices in developing countries is challenged by several barriers. Such PoC devices may not be adopted due to prejudices about new technologies and the need for special training to use some of these devices. Here, we investigated the concerns of end users regarding PoC devices by surveying healthcare workers and doctors. The tendency to adopt PoC device changes is based on demographic factors such as work sector, education, and technology experience. The most apparent concern about PoC devices was issues regarding low accuracy, according to the surveyed clinicians.

scholarly journals Embracing Industry 4.0: Empirical Insights from Malaysia

Informatics ◽  
2021 ◽  
Vol 8 (2) ◽  
pp. 30
Author(s):  
Mansoor Ahmed Soomro ◽  
Mohd Hizam-Hanafiah ◽  
Nor Liza Abdullah ◽  
Mohd Helmi Ali ◽  
Muhammad Shahar Jusoh
Keyword(s):  
Industry 4.0 ◽  
New Technologies ◽  
Descriptive Study ◽  
Digital Transformation ◽  
Quantitative Approach ◽  
Survey Questionnaire ◽  
Digital Revolution ◽  
Leadership Strategy ◽  
The Right ◽  
The Cost

Industry 4.0 revolution, with its cutting-edge technologies, is an enabler for businesses, particularly in reducing the cost and improving the productivity. However, a large number of organizations are still too in their infancy to leverage the true potential of Industry 4.0 and its technologies. This paper takes a quantitative approach to reveal key insights from the companies that have implemented Industry 4.0 technologies. For this purpose, 238 technology companies in Malaysia were studied through a survey questionnaire. As technology companies are usually the first in line to adopt new technologies, they can be studied better as leaders in adopting the latest technologies. The findings of this descriptive study surfaced an array of insights in terms of Industry 4.0 readiness, Industry 4.0 technologies, leadership, strategy, and innovation. This research paper contributes by providing 10 key empirical insights on Industry 4.0 that can be utilized by managers to pace up their efforts towards digital transformation, and can help the policymakers in drafting the right policy to drive the digital revolution.

Investigating the Relationship between Company Competitiveness and Environmental Regulation in European Food Processing: Results of a Matched Firm Comparison

1998 ◽  
Vol 30 (9) ◽  
pp. 1585-1602 ◽  
Author(s):  
D M W N Hitchens ◽  
J E Birnie ◽  
A McGowan ◽  
U Triebswetter ◽  
A Cottica
Keyword(s):  
Environmental Regulation ◽  
Food Processing ◽  
Value Added ◽  
Effluent Treatment ◽  
Environmental Costs ◽  
The European Union ◽  
The Republic ◽  
The Cost ◽  
The Relationship ◽  
Regulation Costs

The authors use a method of matched-plant comparisons between food processing firms in Germany, Italy, Northern Ireland, and the Republic of Ireland to investigate the relationship between environmental regulation and company competitiveness across the European Union. Comparative competitiveness was indicated by measures of value-added per employee, physical productivity, export share, and employment growth. The cost of water supply (public or well), effluent treatment (in-plant treatment and/or sewerage system), and disposal of sludge and packaging were also compared. Total environmental costs in Germany, Italy, and Ireland were small: usually less than 1% of turnover. Compared with the Irish firms, German companies had relatively high environmental costs as well as productivity levels. There was, however, a lack of a clear relationship between company competitiveness and the size of regulation costs: in Ireland and Italy environmental costs were similar but German firms had much higher productivity; compared with German counterparts, Italian firms had lower environmental costs but higher productivity.

Sign in / Sign up

Export Citation Format

Share Document