scholarly journals ​Weed Control using Pre-emergence Herbicide Strip Application System Along with Sowing/Planting Devices

2021 ◽  
Author(s):  
R.R. Potdar ◽  
P.S. Tiwari ◽  
D. Singh ◽  
Prabhakar Shukla ◽  
Bikram Jyoti ◽  
...  
Keyword(s):  
Weed Control ◽  
Operating Cost ◽  
Pressure Gauge ◽  
Field Capacity ◽  
Pigeon Pea ◽  
Inclined Plate ◽  
Pressure Regulator ◽  
Application System ◽  
Single Action ◽  
Pesticide Applicator

A 6-row pre-emergence herbicide strip-application system was designed and developed at ICAR-CIAE, Bhopal as an attachment to inclined-plate planter to apply herbicide at the time of sowing in widely spaced crops to control weeds along the crop rows, often not possible in mechanical weeding. It consisted of a frame on which 6 flat fan spray nozzles were mounted by means of clamps, a single action piston pump with 9 l/min capacity, pressure regulator valve and pressure gauge and pressure pipes. The spacing between the spray nozzles, angle and height of spray nozzles can be varied by adjusting the clamps. The developed system has ability of strip as well as blanket application of herbicide. The same machine can be used as post-emergence herbicide/pesticide applicator after the removal of furrow openers and increasing the height of nozzles from the ground. The machine was tested and evaluated during Kharif season for soybean and pigeon pea crops. The field capacity of the developed system was found to be 0.4 ha/h. The operating cost of the pre-emergence herbicide applicator with inclined plate planter was worked out as Rs 1350/- per ha. It can save about 40-50% herbicide.

Weed Management through Imidazolinones in Pigeon Pea (Cajanus cajan L.)

2021 ◽  
Author(s):  
Amit Kumar ◽  
A.K. Dhaka ◽  
Satish Kumar ◽  
Akshay Kumar Vats ◽  
Harender .
Keyword(s):  
Nutrient Uptake ◽  
Weed Control ◽  
Weed Management ◽  
Promising Result ◽  
Nutrient Content ◽  
Pigeon Pea ◽  
Cost Ratio ◽  
Benefit Cost Ratio ◽  
Pulse Crops ◽  
Net Returns

Background: Pulse crops are commonly known as poor man’s meat. Pigeon pea is second most important pulse crops of India after chickpea. Weeds are amongst prime biotic factors limiting pigeon pea yield and can cause seed yield losses up to 80 per cent. Promising result of weed control by pendimethalin was documented in pigeon pea. Also Imazethapyr is applied as pre and post emergence to control grasses and broad leaved weeds in other pulse crops but limited research was undertaken in pigeon pea. Therefore, current experiment focused to compare the effect of imidazolinones alone and in combination in pigeon pea. Methods: To control weeds in pigeon pea, pre and post-emergence of imidazolinones alone and in combination with pendimethalin was applied. Nutrient content, nutrient uptake, productivity and economics of pigeon pea were worked out.Conclusion: Among herbicidal treatments, the highest nutrient content, nutrient uptake, productivity, net returns and benefit cost ratio in pigeon pea were observed in the pre-emergence application of pendimethalin + imazethapyr @ 1000 + 75 g ha-1. Therefore, this treatment may be an effective and profitable alternative to the existing manual and costlier recommendation (two hoeing at 25 and 45 DAS) of weed control in pigeon pea in Haryana locality.

Development of Three Row Self-Propelled Zero till Direct Seeded Rice Planter Cum Fertilizer Applicator

2019 ◽  
Vol 32 (1) ◽  
pp. 38-42
Author(s):  
Rashmi Anil Bangale
Keyword(s):  
Power Transmission ◽  
Field Capacity ◽  
Fertilizer Application ◽  
Rice Seedling ◽  
Rice Seed ◽  
Prime Mover ◽  
Inclined Plate ◽  
Depth Control ◽  
Direct Seeded ◽  
Field Efficiency

The agricultural operational holding in India is about 1.15 ha and 85.01 per cent belongs to marginal holdings (below 2 ha). This data shows an economic condition of the Indian farmer, which doesn’t allow him to adopt advanced agricultural machineries. Considering the situation of Indian farmer, we developed a prototype of three row self-propelled zero till direct seeded rice planter cum fertilizer applicator. This machine helps to plant a dry rice seed along with the fertilizer application with zero tillage condition. The machine includes inclined plate metering mechanism for seed; cup feed metering mechanism for fertilizer, seed cum fertilizer hopper, ground wheel, depth control wheels, inverted T furrow openers, 5 hp engine as a prime mover, power transmission system, adjustable handle, lever and rigid main frame to support all the parts and drive wheels. Machine is divided into two parts viz., prime mover part and planter cum fertilizer applicator part. Both parts can be separated from each other. The machine places the rice seed up to average depth of 25-40 mm and spacing between hills is observed to be 130-160 mm along with an average 20 cm of row spacing. The average field capacity at an average speed of 2.3 km.h-1 is observed to be 0.115 ha.h-1 for operating rice seeds. The field efficiency is observed to be 86.9 per cent. The operational cost is observed to be around 69.28 per cent less than the manual planting of rice seedling and also the man hour’s requirement is very less than the manual planting.

scholarly journals Design, Construct and Evaluation of a Single Row Hand-Pushed Mechanical Weed Control Machine

2021 ◽  
Vol 25 (3) ◽  
pp. 401-406
Author(s):  
A. Saleh ◽  
M.L. Suleiman
Keyword(s):  
Weed Control ◽  
Sandy Loam ◽  
Labour Force ◽  
Field Capacity ◽  
Vegetable Production ◽  
Loam Soil ◽  
Human Effort ◽  
Field Efficiency ◽  
Peasant Farmers ◽  
Control Machine

Weed control is one of the major problems in crop and vegetable production in Nigeria. Most of the peasant farmers use manual weeders in their cultivation, a process that is costly, labour intensive and time consuming. The process does not also give the farmer adequate returns to enable him breakeven. It is, therefore, necessary to design a weeding equipment which minimize the human effort and provide efficient work output for the peasant farmer. This study focus on designing, construction and evaluation of a hand-pushed weed control machine that would eliminate the challenges being faced by the farmer in weeding. Materials selected to suit the construction of the weeder are durable and locally available, easily replaced if damaged and at affordable cost. They include mild steel (3mm, 5mm), 30 mm circular (hollow) pipes, 10 mm diameter steel rod, and 40 cm pneumatic tyre. The developed weeding machine was evaluated in the experimental farm of IAR with impressive results. It works well in sandy loam soil of about 25.65% moisture content and requires less labour force compared to the manual hoe. It has about 84.7% weeding efficiency, 0.0129ha/hr effectivefield capacity, 0.019ha/hr theoretical field capacity and 68% field efficiency. The average cost of the weeding is N21, 000:00. Keywords: Manual weeding, hand-pushed weeder, weeding efficiency, field efficiency

scholarly journals Intercrop practices in cashew production

2021 ◽  
Vol 10 (3) ◽  
pp. 281-288
Author(s):  
Olufemi Aremu-Dele ◽  
Kehinde Ademola Adesanya ◽  
Bunmi Olaoluwa Olorundare ◽  
Oluwadamilola Ifedolapo Asunbo ◽  
Elizabeth Feyisayo Odeyemi
Keyword(s):  
Weed Control ◽  
Growth Parameters ◽  
Pigeon Pea ◽  
Economic Returns ◽  
Arable Crops ◽  
Tree Crop ◽  
Control Growth ◽  
Negative Effect ◽  
Sole Cropping ◽  
Additional Income

Cashew is an important economic tree crop cultivated for its wood, apple and most especially the nut. The large plant spacing involved in its cultivation encourages intercropping. Intercropping cashew during the early phase of establishment with arable and sometimes tree crops is usually practiced which serves as food security, cultural weed control and means of additional income to farmers. The aim of this study is to look into some experimented cashew intercrop and gaps in the intercrop patterns. Review of past literatures was used in discovering cashew intercrop patterns in Nigeria and some major cashew producing countries. Intercropping cashew with arable crops is more popular and profitable than with tree crop except in Sri-lanka where intercropping with coconut seems profitable than cashew sole cropping. Intercropping of cashew with arable crops, legumes and vegetables did not affect the growth of young cashew except millet, sorghum and pigeon-pea. Cashew/maize and cashew/cassava/yam had high returns respectively. Intercrop combinations with more than two crops affected the growth of cashew. Cashew/rice and cashew/plantain intercrop suppressed the growth of weeds with no negative effect on cashew growth. More concise and implementable research can be done where information on weed control, growth parameters, nutrient demands, yield and economic returns can be gotten from an experiment on the various cashew intercrop patterns as this will make the findings more adoptable by the farmers. Intercropping cashew with more than 2 crops should be discouraged.

scholarly journals Performance Evaluation of BRRI Power Weeder for Low Land Rice (Oryza sativ L.) Cultivation

2017 ◽  
Vol 15 (1) ◽  
pp. 40-48
Author(s):  
AKM Saiful Islam ◽  
MT Islam ◽  
M Sh. Islam ◽  
AKM Lutfor Rahman ◽  
MA Rahman
Keyword(s):  
Grain Yield ◽  
Weed Control ◽  
Crop Production ◽  
Block Design ◽  
Rice Variety ◽  
Field Performance ◽  
Field Capacity ◽  
Control Device ◽  
Effective Field ◽  
Hand Weeding

Mechanical intervention in crop production is increasing rapidly in Bangladesh. Researchers are finding ways to manage weeds in rice field using suitable mechanical devices instead of conventional hand weeding. A study was conducted to evaluate the field performance of BRRI (Bangladesh Rice Research Institute) power weeder compared to BRRI weeder and hand weeding in the farmers’ field at Rashidpur in Mithapukur upazila under Rangpur district during boro season of 2014-15. Three treatments: T1 = BRRI weeder (BW), T2 = BRRI power weeder (BPW) and T3 = Hand weeding (HW) were used in the experiment. The experiment was carried out in a randomized complete block design (RCBD) and replicated in four farmers’ plots. Rice variety BRRI dhan28 was selected for the experiment. The effective field capacity of BW and BPW was found to be 0.06 and 0.09 ha hr-1, respectively. The weeding efficiency was the highest in HW (92%), followed by BPW (78%) and BW (73%). It was found that BW damaged the lowest number of plants (9%) compared to BPW (11%) during weeding operation, although the damaged plants recovered after a few days. BW and BPW reduced 74 and 85% of labor requirement in weeding operation compared to HW. The highest weeding cost was involved in HW (Tk. 4287 ha-1) compared to BW (Tk. 1103 ha-1) and BPW (Tk. 950ha-1). Weed control methods exerted insignificant effect on grain yield. BRRI power weeder and BRRI weeder reduced weeding cost, enhanced weed control and improved the labor efficiency without sacrificing grain yield. The highest BCR was obtained in BPW (1.22) followed by BW (1.16) and HW (1.11). BRRI power weeder and BRRI weeder appeared to be economic, easy and also environmentally safe weed control device in low land rice cultivation. The Agriculturists 2017; 15(1) 40-48

scholarly journals Analysis of energy usage and cost management of mechanize grabber in oil palm plantation

Food Research ◽  
2020 ◽  
Vol 4 (S5) ◽  
pp. 104-109
Author(s):  
M.I.M. Yusop ◽  
S. Mustaffha
Keyword(s):  
Oil Palm ◽  
Operating Cost ◽  
Field Capacity ◽  
Energy Usage ◽  
Fresh Fruit Bunch ◽  
Total Cost ◽  
Loading System ◽  
Mathematical Equations ◽  
The Cost ◽  
Operation Cost

The aim of this study was to evaluate the energy usage and total operation cost of the tractor grabber. The data was collected at FELCRA BERHAD Kawasan Titi Gantong, Bota, Perak. The total cost included all the operation in loading system and evacuation process of fresh fruit bunch (FFB). This study evaluated the energy usage of tractor grabber for three consecutive months using a newly purchased Mini Tractor Grabber Kubota L4400. This study was conducted based on the energy input-output methodology. Mathematical equations are used to determine the field capacity and examine energy usage. The result found that 153.38 MJha⁻¹ of input energy was required to produce 328.43 metric ton per month of FFB in June. The energy was dominated by fuel consumption, machinery and followed by labour. The total operating cost is based on the field capacity of the machine. This study was conducted and obtained the result, assumed that the total cost for a year is RM 47,444.24 and the cost per metric ton is RM 9.76 with energy consumption of 174.23 MJ. Conclusively, it means that the energy usage and cost of operation is efficiently and effectively used in oil palm productivity in FELCRA BERHAD Kawasan Titi Gantong.

scholarly journals Performance Evaluation of Power Weeder in Sugarcane Crop

2020 ◽  
pp. 70-81
Author(s):  
S. Sai Mohan ◽  
G. Sanjana ◽  
D. Avinash ◽  
M. Rohitha ◽  
D. Anil Kumar
Keyword(s):  
Weed Control ◽  
Agricultural Sector ◽  
Crop Yields ◽  
Field Capacity ◽  
Maintenance Cost ◽  
Plant Damage ◽  
Sugarcane Crop ◽  
Unskilled Labour ◽  
Damage Field ◽  
The Cost

Weeding is an important and labour intensive agricultural operation and about 1/3rd of the cost of cultivation is accounted towards weed control operation alone. Any delay and negligence in weeding operation effects the crop yields up to 30-40%. Today the agricultural sector requires non-chemical weed control that safeguards consumers demand for high quality food products and pay special attention to food safety. The objectives of the study was to evaluate the performance of power weeder by evaluating the energy consumption and cost economics of power weeder in sugarcane crop. The evaluation was conducted at soil different moisture contents at 30,45 and 60 days after sowing (DAS) at different speeds of weeder. The bulk density decreased from 0.84 to 0.65 g cm-3 with increased soil moisture content from 7±1 to 12±1 per cent. The field capacity of power weeder varied from 0.0347 to 0.137 ha h-1 when operated with 3 forward speeds at 30, 45 and 60 DAS. The weeding efficiency of power weeder is in the range of 98.74 to 91.22% at 0.584 km h-1, 96.80 to 84.93% at 1.35 km h-1 and 94.67 to 73.72% at 4.153 km h-1. The minimum and maximum plant damage is observed at a forward speeds of 0.584 km h-1 and 4.153 km h-1. When operated at lower speeds the plant damage will be minimum whereas operating at high speeds will result in maximum plant damage. Field machine index of the weeder is observed as 0.83, 0.82 and 0.864 for 30, 45 and 60 DAS. The cost of weeding per hectare is calculated as Rs.3,878 ha-1 and Rs.8000 ha-1 for mechanical and traditional weeding, respectively. It can be started and operated by farmer or any unskilled labour with ease. Also working with power weeder in between the rows is easy with a very less maintenance cost.

scholarly journals Different Irrigation Regimes Influence Phytotoxicity of Prometryn to Pigeon Peas [Cajanus cajan (L.) Millsp.] in Four Soils

1969 ◽  
Vol 68 (4) ◽  
pp. 315-321
Author(s):  
Lii-Chyuan Liu
Keyword(s):  
Weed Control ◽  
Weight Reduction ◽  
Cajanus Cajan ◽  
Pigeon Pea ◽  
Irrigation Regime ◽  
Fresh Weight ◽  
Greenhouse Experiments ◽  
Irrigation Regimes ◽  
Crop Injury

Four greenhouse experiments were conducted in 1981-82 to determine the effect of different irrigation regimes on the phytotoxicity of prometryn [2,4-bis(isopropylamino)-6-(methylthio)-s-triazine] in four soils. The fresh weight of pigeon pea plants treated with prometryn at rates of 2.24 and 3.36 kg/ha was greatly reduced in San Anton soil (Mollisol) as the irrigation regime increased to a maximum. This finding confirms our assumption that excessive irrigation has contributed to the aggravated prometryn injury to pigeon pea plants. However, no significant fresh weight reduction was noted in Corozal (Ultisol), Coto (Oxisol) and Fraternidad (Vertisol) clays under increased irrigation regimes. Precaution should be taken not to overirrigate the soils having a texture similar to that of San Antón. To avoid crop injury precaution should also be taken not to use prometryn for weed control in pigeon peas during the prolonged rainy months of September to November.

scholarly journals Comparative Evaluation of Maize Planters in Conservation Agriculture under Black Cotton Soil of Central India

2020 ◽  
Vol 35 (1-2) ◽  
Author(s):  
C. P. Sawant ◽  
K. P. Singh ◽  
R. S. Singh ◽  
Brij Lal Lakaria ◽  
Anurag Patel ◽  
...  
Keyword(s):  
Energy Consumption ◽  
Crop Production ◽  
Central India ◽  
Field Capacity ◽  
Conservation Agriculture ◽  
Black Cotton Soil ◽  
Inclined Plate ◽  
Maize Crop ◽  
Hybrid Variety ◽  
Field Efficiency

The present study was conducted at ICAR-Central Institute of Agricultural Engineering, Bhopal research farm to study the effect of no-till planters such as inclined plate planter and broad bed shaper-cum-planter on yield, energetics and economics of maize crop production and compared with conventional practices of maize sowing using seed-cum-fertilizer drill. The maize hybrid variety of DMRH-1303 was sown in kharif season of 2019 using inclined plate planter and broad bed shaper-cum-planter under wheat residue load 8 t/ha (HI-1544). The wheat was harvested by combine harvester and its residue was chaffed using shredder. The actual field capacity and field efficiency of inclined plate planter, broad bed shaper-cum-planter and seed-cum-fertilizer drill were observed as 0.31, 0.32 and 0.39 ha/h and 51.67, 58.18 and 76.47%, respectively. The energy consumption for shredding of wheat straw was 399.31 MJ/ha. The energy consumption was maximum in case of sowing with convention seed drill (1965.30 MJ/ha) including single pass of each cultivator and rotavator, which was followed by broad bed shaper-cum-planter under permanent bed condition (792.39 MJ/ha) and inclined plate planter under permanent bed condition (468.77 MJ/ha). The broad bed shaper-cum-planter and inclined plate planter saved energy consumption by 59.7% and 76.14%, respectively as compared to conventional seed-cum-fertilizer drill.The use of inclined plate planter (Rs. 652 per ha) or broad bed former-cum-planter (Rs. 664 per ha) could save 67% in cost of operation compared to seed-cum-fertilizer drill (Rs. 2017 per ha).

scholarly journals Effect of Herbicide Dose and Water Management on Weed Control Efficiency and Yield Performance of Boro Rice

2016 ◽  
Vol 12 (2) ◽  
pp. 39-46
Author(s):  
Md. Ranju Ahmed ◽  
Md. Nasimul Bari ◽  
M. Moynul Haque ◽  
GKM Mustafizur Rahman
Keyword(s):  
Water Management ◽  
Weed Control ◽  
Weed Management ◽  
Field Capacity ◽  
Recommended Dose ◽  
Yield Performance ◽  
Control Efficiency ◽  
Continuous Flooding ◽  
Weed Control Efficiency ◽  
Boro Rice

An experiment was conducted at the Experimental Farm of the Bangabandhu Sheikh Mujibur Rahman Agricultural University (BSMRAU), Salna, Gazipur during November 2011 to May 2012 to determine the effect of pre-emergence herbicide Pretilachlor @ 75%, 100%, 125%, 150%, 175% and 200% of the recommended dose under two water management regime i.e. continuous flooding and field capacity on weed suppression and yield performance of Boro rice cv. BRRIdhan28. One weed free and one control (unweeded) treatment were also imposed for treatment comparison. The experiment was laid down in Split Plot design with three replications. Standard management practices for transplanted rice were followed. Continuous flooding was found to contribute better weed control efficiency than field capacity. At 60 DAT, the highest weed control efficiency of 65.75% was found in the treatment receiving Pretilachlor @ 125% of the recommended dose under continuous flooding and the least (54.76%) was found in the treatment receiving 75% of the recommended dose under field capacity. Continuous flooding contributed to more tillers thanfield capacity, and herbicide up to 125% of the recommended dose enhanced tillering in rice. At 75DAT the highest number of tillers (17.53 hill-1) were found in the plots receiving Pretilachlor @ 125% of the recommended dose under good water management (W1T3), while the lowest (11.10 hill-1) was recorded in W2T6 treatment receiving Pretilachlor @ 200% of the recommended dose under field capacity. The highest tiller mortality (27.90%) was observed in W1T3 treatment, whereas the least (8.06%) was observed in W2T5 treatment receiving the same herbicide @175% of the recommended dose under field capacity. Application of Pretilachlor at recommended dose under continuous flooding contributed to the highest crop dry matter production (1144.60g m-2) thus leading to the highest grain yield of 6.31 t ha-1 being followed by the treatment receiving Pretilachlor @ 125% of the recommended dose under same water management yielding 5.95 t ha-1 along with the highest harvest index of 0.58. Results revealed that Pretilachlor at recommended dose might be considered as viable option for weed management in transplanted Boro rice cultivation for effective weed management and satisfactory grain yield provided that appropriate water management is adopted. Journal of Science Foundation 2014;12(2):39-46DOI:  http://dx.doi.org/10.3329/jsf.v12i2.27737

Sign in / Sign up

Export Citation Format

Share Document