scholarly journals Japanese And Western Management Approaches: Is Convergence Occurring?

Author(s):  
Edwin C. Duerr ◽  
Mitsuko Saito Duerr

Japans rapid economic growth in the 1970s and 1980s, and the success of a number of Japanese factories overseas, led to great interest in the Japanese managerial system and some specific techniques used by Japanese companies. A plethora of books and articles were written about the value of (or threat from) Japanese business-government cooperation, the Japanese employment system and management-labor cooperation, the avoidance of excessive competition, the wide use of long-term relationships and planning, and the emphasis on growth rather than short-term profits. There was also much written about specific Japanese techniques including the use of quality circles, continuous improvement, total quality management, flexible production, and just-in-time and lean production. Many European, Canadian, and U.S. companies adopted some of the most widely publicized Japanese techniques, often in substantially modified form. Important aspects of production and logistics were revolutionized. Some companies also used modified Japanese approaches in attempting to improve management-labor relations.In Japan, the economic problems from the 1990s to the present, and the success of some foreign firms, led to increased interest in Western management approaches. There was growing concern that the traditional Japanese ways of doing business were inadequate to cope with the changing international and domestic environments. During the past decade, there has been wide discussion in the business press of the need for adopting selected Western methods. A number of Japanese companies have announced that they are changing their traditional employment practices, and mergers and acquisitions have become increasingly common. It thus might appear that Japanese and Western managerial philosophy and approaches are converging.While Japan and the West have each benefited substantially from the adoption of ideas and techniques from the other, basic differences remain in the values, beliefs, and objectives of business, government, and society. In this paper, these differences are discussed, and the degree of convergence is seen to be limited more to techniques than to the basic assumptions, objectives, and strategies that drive business.

Author(s):  
Svitlana Koshelenko

The article considers the issues of formation and effective use of inventories by enterprises. It is confirmed that the subject of the inventory management policy consists of two main blocks: the inventory formation policy and the inventory use management policy. Inventory formation management occurs by applying inventory management models. Inventory use management performed by means of indicator calculations of reserves effective use. Inventories are grouped and classified according to the most important features. Inventory management tasks and exiting models is carried out, which takes into account the classic and modern approach to doing business. It is proved that the concepts previously used fail to justify themselves in the new conditions. It is established that most companies in the world improve the efficiency of inventory management as follows: rationalization of processes between companies, shifting ownership of inventory towards suppliers (implementation of the principle of “inventory managed by supplier”), direct delivery of finished products to the consumer in accordance with his wishes and financial capabilities, inventory management using the principle of “just in time”, introduction of flexible (lean) production, etc. Thus, the main trend of foreign firms, in contrast to domestic ones, is the spread of the concept of inventory minimization. Nine provisions (theses) have been formulated for the methodology of forming various for managing inventory values of an enterprise.


2000 ◽  
Vol 7 (3) ◽  
pp. 305-319 ◽  
Author(s):  
Aline Lamon Cerra ◽  
Patricia Viera Grizola Bonadio

Este artigo tem como objetivo discutir as relações existentes entre as Estratégias de Produção e os programas TQM (Total Quality Management ou Gestão da Qualidade Total) e JIT (Just-In-Time), destacando a importância da integração destes programas às Estratégias de Produção nas empresas. O estudo desta integração demonstrou que os programas TQM e JIT, embora possam trabalhar separadamente, são complementares e devem estar alinhados com as Estratégias de Produção a fim de promover melhorias na função produção. Além disso, será verificado de que modo a empresa automobilística condiciona a difusão das estratégias e programas adotados em sua cadeia de fornecedores. Serão apresentados os conceitos básicos e questões teóricas relacionados à Estratégia de Produção, ao TQM e ao JIT, e um estudo de caso nas três empresas.


2011 ◽  
Vol 31 (4) ◽  
pp. 376-386 ◽  
Author(s):  
Relli Shechter

Observers of Saudi society have often expressed bewilderment toward seemingly growing contradictions between “old” and “new,” “tradition” and “modernity,” “authentic” and “foreign,” or “Islamic” and “non-Islamic” in an age of mass consumption. Glocal conservatism in marketing decoupled such conceived binary oppositions, and therefore, the insurmountable tensions they implied. A unique mélange of global and local marketing practices facilitated new consumption patterns and social stratification based on consumption in the making of a Saudi mass consumer society. Glocal conservatism in marketing was encouraged through state discourse and Five-Year Plans; consumers’; selective participation in markets; and self-motivated or self-regulated enterprises. It further enhanced an existing sociocultural order, identity and ideal, as well as local governance. This article studies this critical phase in the remaking of Saudi Arabia using contemporary business press; literature on “doing business”; academic writings on local marketing; Philip Morris’;—a tobacco multinational—records; and by analyzing ads from Okaz, a Saudi daily.


2017 ◽  
Vol 22 (2) ◽  
pp. 244-263
Author(s):  
Rafael de Carvalho Mendes ◽  
Max Cirino de Mattos

ABSTRACT This paper presents the partial results of an ongoing research on the proposal of a methodology for the integration between Knowledge Management (KM) and World Class Manufacturing (WCM). The initial investigation of theoretical and conceptual nature aimed at developing a comprehensive and current vision on KM, WCM, and how (or "whether") these constructs relate to one another. The primary sources for the literature review were Web of Science, Scopus, Emerald, Ebsco, SciELO and Spell, and the time frame was 2000 to 2016. The analysis of the selected papers showed that, although the initial WCM model evolved into a "new WCM" in the 2000s, the literature is still focused on the broad conceptual aspects and basic methods and tools, such as Total Quality Process, Total Productive Maintenance and Just-in-Time, conceived in the Toyota Production System, which shows the need for more studies focused on the current scenario of companies associated with the "new WCM" and its Methods and Tools. Only one article explicitly addressing the interaction between KM theories with WCM was found in the databases surveyed, thus reinforcing the lack of theoretical approximation of these constructs.


2016 ◽  
Vol 14 (23) ◽  
Author(s):  
David Fairris

Resumen:La organización de la producción ha venido sufriendo una rápida transformación desde hace casi dos décadas, con los cambios de los equipos de trabajo, las técnicas administrativas de calidad total y la producción justo a tiempo. Estas transformaciones han resultado en una mejora en la productividad en el trabajo, pero también en las repercusiones negativas sobre la vida de los trabajadores. Si las consecuencias positivas de la transformación del proceso de trabajo con respecto a la productividad están más que compensadas por las consecuencias negativas en las condiciones de trabajo, es posible que el movimiento de transformación del proceso de trabajo sea nocivo para la sociedad como un todo.Palabras clave : organización de la producción; equipos de trabajo; técnicas administrativas; calidad total; producción justo a tiempo; productividad. Abstract:The organization of production has undergone a rapid transformation for almost two decades, through changes in the work teams, the total-quality administrative techniques, and the just-in-time production. These changes have resulted in a better labor productivity, but also in negative effects on workers' lives. If positive consequences of the transformation of labor process with regard to productivity are more than compensated by the negative impact on working conditions, the labor process's change movement can be harmful to society as a whole.Key words: organization of production; work teams; administrative techniques; total quality; just-in-time production; productivity.


2020 ◽  
Vol 8 (1) ◽  
pp. 920-929
Author(s):  
Majdy I. Zuriekat

Purpose: The purpose of this study is to reveal and examine the nature of costing systems design alongside the usage of new manufacturing practices in Jordanian Manufacturing Companies. Design/Methodology/Approach: For carrying out the study, 86 managers from 43 manufacturing companies received the study questionnaire from which 56 were valid for data analysis. The study results are presented using multiple regression analysis. Findings: The results using multiple regressions indicate that Just in Time (JIT), Total Quality Management (TQM) and Product Diversity (PD) has a significant influence on costing systems design. Implications: This study provides evidence on the importance of using management practices as a driver for companies to use a broader perspective for designing costing systems. Responding managers have now empirical evidence regarding the manufacturing practices needed to design costing systems to their companies. Originality/Value: This is the first attempt to examine the manufacturing practices as a driver for cost system design. The study also provides significant managerial implications on how to use manufacturing practices to ensure better cost system design.


2011 ◽  
Vol 43 (1) ◽  
pp. 5-23 ◽  
Author(s):  
Gad G. Gilbar

AbstractEuropean merchants and investors doing business in the Middle East during the long 19th century expected that commercial disputes in mixed cases would be conducted according to procedures and laws familiar to and accepted by them. In the Ottoman Empire and Egypt, mixed courts based on the French commercial code were established during that century. The Qajars, however, offered the foreign commercial community a different judicial institution: the localkārguzār(agent) and his majlis (court). By the beginning of the 20th century, thirty-sixkārguzāroffices operated in Iranian towns and harbors. Nevertheless, foreign (mainly British) merchants and their consuls complained bitterly that it was not an effective institution and that it clearly favored the localtujjār(big merchants). They claimed that these defects meant huge financial losses to them. The Qajars viewed this institution and its functioning differently. It served their policy of discouraging foreign penetration, and it contributed to the competitiveness of the Iraniantujjārin their struggle for commercial superiority.


Author(s):  
Kaya AĞIN

Global growth and change strategies force organizations to change their management systems. Organizations that want to survive and be successful today apre trying to implementmodern management systems under their own management. Thus, they want to continue their existence in a competitive environment by adapting to changing and developing conditions. Organizations that realize the fact that change is a necessity, we see that they renew their organizational structure, systems and processes in order to compete in global markets. Reengineering is one of these methods. The pressure of competition has made system change. compulsory in organizations Reengineering, like other modern management techniques, aims to radically change the organizational management system, processes and policies in order to increase organizational performance. Reengineering is considered to be closely related to total quality management practice. Total quality management aims at customer satisfaction. Reengineering focuses on how to implement it. Organizations, reengineering management system applications will increase organizational performance. In this study, the theoretical framework of reengineering will be conceptually examined and its relations with total quality management will be revealed. Keywords: Change management, Reengineering, Globalization


Author(s):  
Ned Kock

Business process improvement can be defined as the analysis, redesign, and subsequent change of organizational processes to achieve performance and competitiveness gains. The idea that business process-focused improvement can be used as a tool to boost organizational performance and competitiveness is not new. In fact, business process improvement has been the basis of several widely adopted management approaches, such as total quality management, business process reengineering, and organizational learning. As the following sections briefly show, business process-focused improvement can be a unifying concept of these management approaches.


2008 ◽  
Vol 07 (02) ◽  
pp. 195-219 ◽  
Author(s):  
HIROHISA SAKAI ◽  
KAKURO AMASAKA

Traditional TPS (Toyota Production System), the foundation of JIT (Just in Time), has contributed to global business in the latter half of the 20th century as a Japanese production management system methodology. At present, Japanese companies are endeavoring to survive in a competitive market by expanding their global production, achieving globally consistent levels of quality, and carrying out simultaneous new model launches. An advanced production management principle, "Advanced TPS", has been proposed, involving the systematization of Japanese production management methodologies as a strategic tool for global production. The effectiveness of the proposed "Advanced TPS" was verified at Toyota Motor Corporation.


Sign in / Sign up

Export Citation Format

Share Document