scholarly journals Diagnosing of misfire events in compression-ignition engines with the help of vibroacoustic methods in the aspect of OBD system application in diesel locomotives

2008 ◽  
Vol 132 (1) ◽  
pp. 3-16
Author(s):  
Jerzy MERKISZ ◽  
Marek WALIGÓRSKI
Keyword(s):  
Internal Combustion Engines ◽  
Combustion Engine ◽  
High Reliability ◽  
Direct Injection ◽  
Combustion Process ◽  
Vibration Signal ◽  
Internal Combustion ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Railway Traction

The article concerns the possibilities of use of the method being able to assess of the combustion process and its lack in internal combustion engines of railway traction vehicles, that bases on the use of vibration signal parameters. The paper includes the results of research conducted on the engine test bench with a single cylinder research and compression-ignition engine with direct injection, and tests for the engine of a diesel locomotive in the exploitation condition. Possibility of the vibration signal estimators application to the assessment of a combustion process lack in an internal combustion engine and a high reliability of combustion process diagnostics basing on the above method have been proved.

The Compression-Ignition Engine and Its Applicability to British Railway Traction

1933 ◽  
Vol 124 (1) ◽  
pp. 3-61 ◽  
Author(s):  
L. F. R. Fell
Keyword(s):  
Internal Combustion Engine ◽  
High Speed ◽  
Combustion Engine ◽  
Internal Combustion ◽  
High Rate ◽  
Wide Field ◽  
Compression Ignition ◽  
Electric Locomotive ◽  
Compression Ignition Engine ◽  
Railway Traction

The author considers that, while the internal combustion engine is not universally applicable to British railway traction, there is a wide field which can be more economically covered by the oil engine than by other means. Electric transmission is, in spite of high first cost, the most readily adaptable for use in conjunction with the oil engine, and possesses a balance of advantages over all other known systems. The oil-electric locomotive offers a long list of important advantages for railway operation not possessed by other systems. These advantages are, however, offset by high first cost for powers of 1,000 b.h.p. and over. A comparison is drawn between the first cost of steam and oil-electric locomotives for the various duties called for in the service of a British railway. This shows that, while the first cost of the oil-electric main line express passenger locomotive is three times that of the existing steam locomotive, the first costs of branch passenger, medium goods, and shunting steam and oil-electric engines are comparable. This is owing to the cost per brake horse-power required diminishing with increase of size in the case of the steam locomotive, whereas it remains constant in the case of the oil-electric. Owing to the high rate of acceleration necessary the use of the oil-electric system is considered unsuitable as a substitute for dependent electrification of suburban lines. The railway oil engine is a specialized requirement. It must be of the high-speed type running at speeds of up to 1,500 r.p.m., in order to reduce first cost and for other reasons. Details are given of various types of British compression-ignition engines which are considered suitable for British railway work. The author deduces that an engine of twelve-cylinder “V” type and an engine with six cylinders in line, both incorporating the same design and size of cylinder, would fill all the requirements which can be economically met by the oil engine on a British railway. He selects the single sleeve-valve engine design as having the greatest balance of advantages in its favour for railway purposes. Attention is drawn to the importance of simplifying the installation of the compression-ignition engine and various suggestions are put forward to this end. In conclusion the author stresses the importance of the railway companies giving a lead to the internal combustion engine industry as to the railway requirements in size and type of engine, and states that it is the purpose of his paper to assist those concerned in arriving at this immediately important decision.

scholarly journals Study on Combustion and Emission Characteristics of Marine Diesel Oil and Water-In-Oil Emulsified Marine Diesel Oil

Energies ◽  
2018 ◽  
Vol 11 (7) ◽  
pp. 1830 ◽  
Author(s):  
Moonchan Kim ◽  
Jungmo Oh ◽  
Changhee Lee
Keyword(s):  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Direct Injection ◽  
Internal Combustion ◽  
Diesel Oil ◽  
Combustion Efficiency ◽  
Compression Ignition ◽  
Compression Ignition Engines ◽  
Brake Mean Effective Pressure ◽  
Marine Diesel

Compression ignition engines used as marine engines are the most efficient internal combustion engines. They are well-established products, and millions are already on the market. Water-in-MDO (marine diesel oil) emulsions are the best alternative fuel for compression ignition engines and can be utilised with the existing setup of 2.0 L automotive common rail direct injection (CRDI) engines. They have benefits for the simultaneous reduction of both NOx and smoke (black carbon). Furthermore, they have a significant impact on the improvement of combustion efficiency. Micro-explosions are the most important phenomenon of water-in-diesel emulsions inside an internal combustion engine chamber. They affect both the emission reduction and combustion efficiency improvements directly and indirectly in accordance with the brake mean effective pressure (BMEP) and rpm. Owing to the influence of micro-emulsions on the combustion and emissions of water-in-diesel emulsion fuel, the reduction ratios of NOx and smoke in a used engine are approximately 30% and 80%, respectively. The effect of the operating parameters on micro-emulsions is presented.

scholarly journals A Review of Hydrogen Direct Injection for Internal Combustion Engines: Towards Carbon-Free Combustion

2019 ◽  
Vol 9 (22) ◽  
pp. 4842 ◽  
Author(s):  
Ho Lung Yip ◽  
Aleš Srna ◽  
Anthony Chun Yin Yuen ◽  
Sanghoon Kook ◽  
Robert A. Taylor ◽  
...  
Keyword(s):  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Current Knowledge ◽  
Direct Injection ◽  
Internal Combustion ◽  
Combustion Engines ◽  
Flammability Limits ◽  
Compression Ignition Engine ◽  
Engine Operation ◽  
Engine Industry

A paradigm shift towards the utilization of carbon-neutral and low emission fuels is necessary in the internal combustion engine industry to fulfil the carbon emission goals and future legislation requirements in many countries. Hydrogen as an energy carrier and main fuel is a promising option due to its carbon-free content, wide flammability limits and fast flame speeds. For spark-ignited internal combustion engines, utilizing hydrogen direct injection has been proven to achieve high engine power output and efficiency with low emissions. This review provides an overview of the current development and understanding of hydrogen use in internal combustion engines that are usually spark ignited, under various engine operation modes and strategies. This paper then proceeds to outline the gaps in current knowledge, along with better potential strategies and technologies that could be adopted for hydrogen direct injection in the context of compression-ignition engine applications—topics that have not yet been extensively explored to date with hydrogen but have shown advantages with compressed natural gas.

Study of Combustion Anomalies of H2-ICE With External Mixture Formation

2006 ◽  
Author(s):  
Stephen A. Ciatti ◽  
Thomas Wallner ◽  
Henry Ng ◽  
William F. Stockhausen ◽  
Brad Boyer
Keyword(s):  
Internal Combustion Engines ◽  
Large Scale ◽  
High Efficiency ◽  
Combustion Engine ◽  
Direct Injection ◽  
Combustion Process ◽  
Engine Performance ◽  
Internal Combustion ◽  
Hydrogen Combustion ◽  
Mixture Formation

Although hydrogen is considered one of the most promising future energy carriers, there are several challenges to achieving a “hydrogen economy,” including finding a practical, efficient, cost-effective end-use device. Using hydrogen as a fuel for internal combustion engines is seen as a bridging technology toward a large-scale hydrogen infrastructure. To facilitate high-efficiency, high-power-density use of hydrogen with near-zero emissions in an internal combustion engine, detailed analysis of the hydrogen combustion process is necessary. This paper presents thermodynamic results regarding engine performance and emissions behavior during investigations performed on a single-cylinder research engine fueled by pressurized gaseous hydrogen. Avoiding combustion anomalies is one of the necessary steps to further improve the hydrogen engine power output at high-load operation while, at the same time, reducing fuel consumption and emissions during part-load operation. The overall target of the investigations is an improved combustion concept especially designed for hydrogen-engine-powered vehicles. Future activities include performing optical imaging of hydrogen combustion by using an endoscope. We will also investigate supercharged external mixture formation, as well as hydrogen direct-injection operation.

Effect of Engine Operating Parameters on Combustion and Emission Characteristics

1992 ◽  
Author(s):  
Jiang Lu ◽  
Ashwani K. Gupta ◽  
Eugene L. Keating
Keyword(s):  
Internal Combustion Engine ◽  
Combustion Chamber ◽  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Combustion Process ◽  
Pressure Rise ◽  
Internal Combustion ◽  
Operating Parameters ◽  
Emission Characteristics ◽  
Pollutants Emission

Abstract Numerical simulation of flow, combustion, heat release rate and pollutants emission characteristics have been obtained using a single cylinder internal combustion engine operating with propane as the fuel. The data are compared with experimental results and show excellent agreement for peak pressure and the rate of pressure rise as a function of crank angle. The results obtained for NO and CO are also found to be in good agreement and are similar to those reported in the literature for the chosen combustion chamber geometry. The results have shown that both the combustion chamber geometry and engine operating parameters affects the flame growth within the combustion chamber which subsequently affects the pollutants emission levels. The code employed the time marching procedure and solves the governing partial differential equations of multi-component chemically reacting fluid flow by finite difference method. The numerical results provide a cost effective means of developing advanced internal combustion engine chamber geometry design that provides high efficiency and low pollution levels. It is expected that increased computational tools will be used in the future for enhancing our understanding of the detailed combustion process in internal combustion engines and all other energy conversion systems. Such detailed information is critical for the development of advanced methods for energy conservation and environmental pollution control.

scholarly journals Assessment of thermodynamic cycle of internal combustion engine in terms of rightsizing

2019 ◽  
Vol 178 (3) ◽  
pp. 182-186
Author(s):  
Zbigniew SROKA ◽  
Maciej DWORACZYŃSKI
Keyword(s):  
Internal Combustion Engine ◽  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Combustion Process ◽  
Thermodynamic Cycle ◽  
Internal Combustion ◽  
Research Problem ◽  
Combustion Engines ◽  
Operating Characteristics ◽  
Swept Volume

The modification of the downsizing trend of internal combustion engines towards rightsizing is a new challenge for constructors. The change in the displacement volume of internal combustion engines accompanying the rightsizing idea may in fact mean a reduction or increase of the defining swept volume change factors and thus may affect the change in the operating characteristics as a result of changes in combustion process parameters - a research problem described in this publication. Incidents of changes in the displacement volume were considered along with the change of the compression space and at the change of the geometric degree of compression. The new form of the mathematical dependence describing the efficiency of the thermodynamic cycle makes it possible to evaluate the opera-tion indicators of the internal combustion engine along with the implementation of the rightsizing idea. The work demonstrated the in-variance of cycle efficiency with different forms of rightsizing.

A comprehensive evaluation of water injection in the diesel engine

2021 ◽  
pp. 146808742110442
Author(s):  
Sebastian Welscher ◽  
Mohammad Hossein Moradi ◽  
Antonino Vacca ◽  
Peter Bloch ◽  
Michael Grill ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Internal Combustion Engines ◽  
Comprehensive Evaluation ◽  
Combustion Engine ◽  
Water Injection ◽  
Combustion Process ◽  
Internal Combustion ◽  
Exhaust Emission ◽  
Pressure Trace ◽  
High Level

Due to increasing climate awareness and the introduction of much stricter exhaust emission legislation the internal combustion engine technology faces major challenges. Although the development and state of technology of internal combustion engines generally reached a very high level over the last years those need to be improved even more. Combining water injection with a diesel engine, therefore, seems to be the next logical step in developing a highly efficient drive train for future mobility. To investigate these potentials, a comprehensive evaluation of water injection on the diesel engine was carried out. This study covers >560 individual operating points on the test bench. The tests were carried out on a single-cylinder derived from a Euro 6d four-cylinder passenger car with the port water injection. Furthermore, a detailed pressure trace analysis (PTA) was performed to evaluate various aspects regarding combustion, emission, etc. The results show no significant effects of water injection on the combustion process, but great potential for NOx reduction. It has been shown that with the use of water injection at water-to-fuel rates of 25%, 50%, and 100%, NOx reduction without deterioration of soot levels can be achieved in 62%, 40%, and 20% of the experiments, respectively. Furthermore, water injection in combination with EGR offers additional reduction in NOx emissions.

Application of Hyperbolic Tangent Approximation Model to Gasoline Direct Injection Engine Simulation

2017 ◽  
Author(s):  
Tomoyuki Hosaka ◽  
Taisuke Sugii ◽  
Eiji Ishii ◽  
Kazuhiro Oryoji ◽  
Yoshihiro Sukegawa
Keyword(s):  
Open Source ◽  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Direct Injection ◽  
Internal Combustion ◽  
Experimental Results ◽  
Gasoline Direct Injection ◽  
Pollutant Emissions ◽  
Mixture Formation ◽  
Hyperbolic Tangent

The improved fuel economy and low pollutant emissions are highly demanded for internal combustion engines. Gasoline Direct Injection (GDI) engine is the one of promising devices for highly efficient engine. However, GDI engines generally tend to emit more Particulate Matter (PM) than Port Fuel Injection (PFI) engine because the fuel sprayed from the injector can easily attach to the wall, which is the major origin of PM. Therefore, the precise analysis of the fuel/air mixture formation and the prediction of emissions are required. From the view of industrial use, Computational Fluid Dynamics (CFD) becomes a necessary tool for the various analyses including the fuel/air mixture formation, spray attachment on the cylinder wall, the in-cylinder turbulence formation, the combustion and emission etc. In our previous study, the flow and spray simulation in internal combustion engine has been conducted using OpenFOAM®, the open-source CFD toolbox. Since the engine involves the dynamic motion such as valve and piston, the morphing and mapping approach was employed. Furthermore, by virtue of open-source code, we have developed the methodology of the hybrid simulation from the internal nozzle flow to the fuel/air mixture in order to take into account detailed breakup process nearby injector nozzle. We expand the above research to the combustion simulation. For the combustion model, the Hyperbolic Tangent Approximation (HTA) model is adopted. The HTA model has a simple form of equation and one can easily implement; moreover, the HTA model has the following features: 1. capability of both laminar and turbulent flow, 2. the clearness of analytical derivation based on the functional approximation of the reaction progress variable distribution in a one-dimensional laminar flame. In the current study, the premixed flame is studied on a gasoline combustion engine. The simulations for in-cylinder engine are conducted with different Air/Fuel (A/F) ratio conditions, and the results are compared with the experimental results. The in-cylinder pressure agrees well with experimental results and the validity of the current methodology is confirmed.

Sign in / Sign up

Export Citation Format

Share Document