scholarly journals Quality Control of Raw Materials on Red Snapper (Lutjanus sp.) Freezing Process in PT. Tridaya Jaya Manunggal Pasuruan East Java

2021 ◽  
Vol 10 (2) ◽  
pp. 85
Author(s):  
Winona Valeria Siregar ◽  
M. Nur Ghoyatul Amin
Keyword(s):  
Quality Control ◽  
Production Process ◽  
Raw Materials ◽  
Secondary Data ◽  
Red Snapper ◽  
Second Grade ◽  
Freezing Process ◽  
Market Values ◽  
Control Procedures

Red snappers are fishery commodities which have high market values. Raw materials of red snappers are important elements which determine the quality of the final products. Therefore, an enhancement of raw materials quality should be conducted through quality supervision and examination when the raw materials are retrieved, stored, and about to enter production process. The aim of this fieldwork practice is to find out the raw materials quality control on red snapper freezing process in PT. Tridaya Jaya Manunggal Pasuruan, East Java. The data taken consists of primary and secondary data which are processed descriptively. Data collection techniques through observation, interviews, active participation and literature review. PT. Tridaya Jaya Manunggal has implemented quality control on production process, starting from raw materials retrieval until these raw materials become final products. The quality control of raw red snappers were done in accordance with the quality control procedures which are plan, do, check, and action. The results of implementing quality control which were executed with organoleptic examination, temperature, Total Volatile Base (TVB), microbiology, and heavy metals on raw red snappers. Raw materials which didn’t meet the required standard were rejected, and then they were processed to be second grade products.

scholarly journals ANALISIS SISTEM PENGAWASAN KUALITAS PRODUK PADA PT INDUSTRI SANDANG NUSANTARA UNIT PATAL SECANG DI MAGELANG JAWA TENGAH

2014 ◽  
Vol 5 (2) ◽  
Author(s):  
Listiani Listiani
Keyword(s):  
Quality Control ◽  
Control System ◽  
Production Process ◽  
Raw Materials ◽  
Employee Performance ◽  
Fish Bone ◽  
Quality Control System ◽  
Observation Data ◽  
And Control

This research is aimed to determine the quality control system of production process in PT Industri Sandang Nusantara unit Patal Secang, measure the efectivity of quality control system by using control P-Chart and determine factors that cause defect product. This research is explorative descriptive by case study method. Data used in this research is the procedure of production process and the number of defect product. Product used in this company is  thread R30/1 UW and R 40/1 UW PT Industri Sandang Nusantara Unit Patal Secang in 24 periods of production between April – Mei 2006. Data is collected by interview, documentation, and observation. Data is analyzed by control p-chart and fish bone diagram. The conclusion of this research are: (1) The quality control system which is consists of controlling raw materials, production process and final product is appropriate with the company’s standard; (2) the number of defect product R 30/1 UW is 26.956 bale with the average 0.0167; Control P Chart shows that there are three periods which are out of control. They are in April 30, Mei 5 and 21, 2006. (3) The number of final product R 40/1 UW is 2159 bale with the average 0.0214; control p-chart shows that there are tw periods which are out of control. They are ini Mei 6 and Mei 12, 2006. (4) Factors that cause defect product are obsolete machines, employee performance, control system, and raw materials. Based on that condition, management should impove the controlling of machines, improve motivation and commitment of the employee, improve the method of inspection and control the quality of raw materials.

scholarly journals Analysis of quality control in efforts to reduce the level of product defects at PT. MAG

2020 ◽  
Vol 8 ◽  
pp. 428-436
Author(s):  
Isna Zulfa Azmi ◽  
Oktora Yogi Sari
Keyword(s):  
Quality Control ◽  
Production Process ◽  
Product Quality ◽  
Six Sigma ◽  
Raw Materials ◽  
Analysis Tool ◽  
Factors Affecting ◽  
And Control ◽  
Dmaic Method

The increasing number of bag factories throughout Indonesia that have well-known brands and every manufacturer is required to provide products of good quality. Poor product quality will cause consumers to move to other similar products. So in the production of bags, the thing that must be considered by the company is the quality of its products. In this study the authors aim to analyze quality control in a production process and identify several factors that cause disability in the product, PT. MAG is a bag company that is demanded to control the quality of the production process. This study uses a six sigma analysis tool consisting of five steps, namely using the DMAIC method (Define, Measure, Analyze, Improve, and Control). Based on the results of the study there are three types of disabilities in the production process, including cutting, zippers and broken bag straps with an average sigma value of 2.48 with a DPMO value of 20256.92. Factors affecting the production process are human, machine, environment, equipment, raw materials, and methods. In this case the company can use the Six Sigma method because it is still in the medium category.

scholarly journals ANALISIS QUALITY CONTROL MUTU MINYAK KELAPA SAWIT DI PT. PERKEBUNAN LEMBAH BHAKTI ACEH SINGKIL

2020 ◽  
Vol 1 (2) ◽  
pp. 72-78
Author(s):  
Yulianto
Keyword(s):  
Quality Control ◽  
Moisture Content ◽  
Production Process ◽  
Palm Oil ◽  
Raw Materials ◽  
Oil Quality ◽  
Selling Price ◽  
Average Quality ◽  
A Company

This study aims to determine the analysis of the quality control of palm oil quality in PT. Lembah Bhakti Aceh Singkil Plantation. The function of implementing quality control is to control the quality of the initial input in the form of completion of raw materials, the production process, to the process of output of finished goods. This study uses several methods, namely filtration and titration. The average quality of palm oil at FFA levels ranges from 3.39 to 4.97 with a max.3 standard, a moisture content ranging from 0.12 to 0.3% with a max standard. 0.2%, and impurities levels ranged from 0.015-0.025% with the max standard. 0.02%. Based on the results of the study it can be concluded that the measurement of quality control that is carried out is very influential in product quality, so that it can affect the income. Where the income of a company depends on the CPO oil selling price in PMKS PT. Perkebunan Lembah Bhakti. The selling value in marketing is very dependent on the quality of the CPO.

scholarly journals Quality certificates for homeopathic matrices

2021 ◽  
Vol 10 (36) ◽  
pp. 224-225
Author(s):  
Virginia Teresa Cegalla ◽  
Amarilys de Toledo Cesar
Keyword(s):  
Quality Control ◽  
Production Process ◽  
Raw Materials ◽  
Packaging Materials ◽  
Minimum Information ◽  
Homeopathic Medicine ◽  
The Matrix ◽  
High Dilutions

Background: To produce homeopathic medicines, pharmacies need raw materials (mother tinctures and diluted-agitated solutions, named “matrices”), provided by insumes suppliers. The “matrices” are ultra high dilutions and can not be tested against Analysis Reports. Aims: to propose alternatives to the matrices Analysis Report; to contribute to the quality of homeopathic medicines and treatment. Method: search of information present in the documentation provided from 2 national and 3 European suppliers in order to develop criteria. Discussion: the needed concepts for compliance with the orders throughout their production process were presented. The control of information involved in the process allows to trace the production of matrices, providing an indication of the quality with which they were obtained. Each supplier gives different approach to issuing a document, calling it Certificate of Conformity Protocol Preparation, Manufacturing Certificate or Quality Certificate. Summarizing, it is a supplier's declaration, which involves the quality control of raw materials, packaging materials and of the process used, but not a report that enables customers to repeat the analysis. A model was proposed for a Certificate of Quality, with the minimum information needed to indicate to the pharmacies that there is a control of the process. This certificate shall contain statements about the process. Conclusion: Quality Certificate seems to be the best document to ensure the pharmacy that the matrix obtained presents characteristics compatible with the preparation of a quality homeopathic medicine.

scholarly journals Pengendalian Mutu Pada Proses Produksi Di Tiga Usaha Kecil Menengah Tahu Kabupaten Bogor

2016 ◽  
Vol 4 (2) ◽  
pp. 112
Author(s):  
Devi Sonalia ◽  
Musa Hubeis
Keyword(s):  
Quality Control ◽  
Production Process ◽  
Control Chart ◽  
Secondary Data ◽  
Influential Factor ◽  
Analysis Tool ◽  
Pareto Chart ◽  
Cause And Effect ◽  
Cause And Effect Diagram

<p><em>Today the growth of Small and Medium Enterprises (SMEs) is increasing significantly along with the rise in competitiveness in this field. Accordingly entrepreneurs who want to get into the competition and do not want to be left behind by other SMEs in the business field have to pay attention to the quality of their product. The purpose of this study are: (1) to analyze the quality control (QC) on the production process in SMEs of Tofu (soybean cake) as Tahu  Bambu, Tahu Bandung Ashor and Tahu Bandung; (2) to  identify the factors which cause damage of Tofu as Tahu Bambu, Tahu Bandung Ashor and Tahu Bandung; (3) to identify the most influential factor affecting  the quality  of Tofu as Tahu Bambu, Tahu Bandung Ashor and Tahu Bandung; and (4) to assess the QC on the production process in the above three unit. The data used in this study were primary and secondary data. Primary data were obtained through direct observation and interviews with the SMEs, while the secondary data were taken from the internet and references such as books, journals and theses. Analysis tool used were Pareto Diagram, Cause and Effect Diagram and Control Chart. It is from Cause-Effect diagram that the factors affecting damage in three SMEs of Tahu were revealed, i.e human, raw materials, machines and tools, methods and environment with the main cause of most influence through analysis Pareto diagram is one piece. Quality control of the SMEs Tahu Bambu and SMEs Tahu Bandung  analyzed using by p Control Charts indicated that they were controlled.</em><strong><em></em></strong></p><p><em>Keywords: </em><em>Quality controls, Cause and effect diagram, Pareto chart, Control chart</em><strong></strong></p>

scholarly journals The Application of Powerpoint Media in Thematic Learning in The Second Grade of Elementary School

2019 ◽  
Vol 2 (1) ◽  
pp. 32
Author(s):  
Uzima Candrawati
Keyword(s):  
Lesson Plan ◽  
Secondary Data ◽  
Primary Data ◽  
Second Grade ◽  
Content Standards ◽  
Analysis Technique ◽  
Basic Competency ◽  
Thematic Learning ◽  
Depth Interviews

This study aimed to adjust the predetermined theme with the theme implemented. In addition, giving interesting presentations to students, and teachers can improve the quality of human resources in the field of technology and information. This study used a qualitative approach. Data sources consisted of primary data and secondary data through procedures for collecting data with participatory observation, in-depth interviews, and documentation studies. The data analysis technique in this study used domain techniques, taxonomic techniques, compound techniques, and theme techniques. For the process of checking the validity of the data, a triangulation process was carried out to obtain accurate research results. The results of the study obtained that in thematic learning using the Lesson Plan (RPP) to achieve a basic competency set out in the Content Standards and described in the syllabus through various learning behaviors of students.

scholarly journals PENERAPAN STATISTICAL QUALITY CONTROL (SQC) PADA PENGENDALIAN MUTU MINYAK TELON (STUDI KASUS DI PT.X)

AGROINTEK ◽  
2019 ◽  
Vol 13 (1) ◽  
pp. 72
Author(s):  
Andan Linggar Rucitra ◽  
S Fadiah
Keyword(s):  
Quality Control ◽  
Raw Materials ◽  
Control Process ◽  
Statistical Quality Control ◽  
Statistical Quality ◽  
Quality Control Process ◽  
Fishbone Diagram ◽  
Potential Factor ◽  
Measurement Of Success

<p><em>Telon oil is</em><em> one of </em><em> </em><em>the </em><em>traditional medicine in the form of </em><em> </em><em>liquid preparations that serves to provide a sense of warmth to the wearer. PT</em><em>.X</em><em> is one of the companies that produce</em><em> </em><em>telon</em><em> oil</em><em>.</em><em> To maintain</em><em> the quality of telon oil from PT.X</em><em> product</em><em>, required overall quality control that is starting from the quality control of raw materials, quality control process to the quality control of the final product. The purpose of this research is to know the application of Statistical Quality Control (SQC) in controlling the quality of telon oil in PT X. </em><em>F</em><em>inal product</em><em> quality</em><em> become one of the measurement of success of a process, so it needs a good quality control. SQC method used in this research is Pareto Diagram and Cause and Effect Diagram. Pareto diagram is a bar graph </em><em>that </em><em>show the problem based on the order of the number of occurrences of the most number of problems until the least happened. A causal diagram is often called a fishbone diagram, a tool for identifying potential causes of an effect or problem. The result of applying the method indicates that 80% defect is caused by unsuitable volume and on the incompatibility of Expired Date (ED) code. The damage is caused by several factors namely the method, labor, and machine while the most potential factor is the volume conformity to reduce the number of defect products.</em></p>

scholarly journals Review on Standardization of Ayurvedic Medicine

2021 ◽  
pp. 194-199
Author(s):  
Janmejay Pant ◽  
. Ripudhaman
Keyword(s):  
Quality Control ◽  
Raw Materials ◽  
Dosage Forms ◽  
Classical Literature ◽  
Scientific Methods ◽  
Ayurvedic Drugs ◽  
Drug Manufacturing ◽  
And Storage ◽  
Current Guidelines

Standardization in Ayurvedic formulations ensures the establishment of standards for the quality and purity of raw materials, quality control during the drug manufacturing process, production of a good quality finished product, storage and distribution to maintain the quality of the final product. It is an essential tool for establishing quality control methods for Ayurvedic drugs. In Ayurveda, standardization has been well defined and documented in the classical and contemporary texts. Still, these have been written with an individualistic intent and not for industrial or commercial purposes.  Careful contemplation of the classical literature of Ayurveda was done, the current guidelines of WHO on standardization of herbal drugs, latest researches on the same via the internet were explored and examined in the purview of the newest standardization procedures.  In this article, an attempt has been made to bring to light the classical references related to standardization, the milestones in this on-going pursuit have been exhibited, with the use of the latest scientific methods being incorporated for a standardized Ayurvedic drug. It can be concluded from the review that standardization in Ayurveda is an on-going process where one needs to be strictly vigilant about the new scientific methods to study the fine chemical procedures and the intermediate compounds formed, but at the same time be aware of the classical. Ayurvedic methods concepts of the procedure. Asava-arista's medicinal characteristics of Ayurvedic classical dosage forms, liquid dosage forms based on self-generated alcohol with faster absorption, long shelf life, and increased market conformity have led to a continuous rise in demand. New fermentation methods and packaging innovations tend to have been embraced by many Ayurvedic processing units. The importance of standardization of such goods is underlined by these advances in manufacturing, distribution and storage. Therefore, it is of concern to examine the latest manufacturing situation and the standardization of the dosage type regarding the procedure and the consistency and effectiveness of the finished product. In addition to the effort to include criteria of consistency and standardization, the study consists of an overview and deliberates on the importance of improvements made to the conventional preparation processes, ingredients and material used in the process and the potential impact on its efficacy.

scholarly journals Quality control of aluminium melt in production process

2016 ◽  
Vol 61 (Special Issue) ◽  
pp. S43-S47 ◽  
Author(s):  
M. Kotus ◽  
E. Jankajová ◽  
M. Petrík
Keyword(s):  
Quality Control ◽  
Chemical Composition ◽  
Production Process ◽  
Aluminium Alloy ◽  
Technological Process ◽  
Casting Alloy

The quality of aluminium alloy in the production process on the chemical composition basis was evaluated. The quality of casting alloy depends on the chemical composition of melt and on the technological process of production process. The basic elements such as Si, Cu, Fe, Mg and Al in melting were evaluated. The obtained data were compared with the guide data referred to in the standard for aluminium alloy.

Quality Control of EPS External Wall Thermal Insulation System

2011 ◽  
Vol 71-78 ◽  
pp. 4115-4119
Author(s):  
Xiao Qiu Ma
Keyword(s):  
Quality Control ◽  
Thermal Insulation ◽  
Raw Materials ◽  
Insulation System ◽  
Acceptance Criteria ◽  
Construction Quality ◽  
External Wall ◽  
Construction Methods

To ensure the construction quality of EPS external wall thermal insulation system , need to controll raw materials, construction conditions, construction methods and quality control acceptance criteria and other aspects

Sign in / Sign up

Export Citation Format

Share Document