Features of pore formation of semiconductors by example zinc selenide and indium phosphide

2012 ◽  
Vol 16 (5) ◽  
pp. 13-17
Author(s):  
V.V. Kidalov ◽  
O.V. Marakhovskyi ◽  
Ya.O. Cychikova ◽  
H.O. Sukach

The paper represent a methodology and mechanizm of obtaining porous layers in ZnSe and InP substrates by photoelectochemical etching in acid solutions. Morphology of the surface was investigated by using scanning electron microscopy. By using energy dispersion X-ray analysis method (EDAX) was determined chemical composition of the obtained film`s surface

Clay Minerals ◽  
2011 ◽  
Vol 46 (3) ◽  
pp. 461-471 ◽  
Author(s):  
Z. Klika ◽  
P. Pustková ◽  
M. Dudová ◽  
P. Čapková ◽  
Ch. Kliková ◽  
...  

AbstractThe adsorption of methylene blue (MB) on montmorillonite from acid solutions has not yet been studied in detail. In this paper the adsorption of this dye on Ca/SAz montmorillonite from 0.32, 0.80 and 1.60 M HCl solutions at ambient temperature and after 2 hours leaching was carefully studied and evaluated. Under the above conditions the MB/SAz intercalates formed are practically insoluble. In contrast to the adsorption of methylene blue on montmorillonite from aqueous solutions, the adsorption from acid solutions consists of two adsorption waves. The intercalated samples from the first and second waves were studied using X-ray powder diffraction (XRD), FTIR, Vis spectroscopy, and scanning electron microscopy (SEM) equipped with a microprobe system. The adsorption of MB in the first wave is attributed to ion exchange of the dye cationic species (MB+, MB22+, H-aggregates, MBH2+ and H+) for the original interlayer cations of montmorillonite. The percentages of MBH2+ and H+ based on total adsorbed MB were estimated for varying HCl concentrations. The second adsorption wave is linked to the precipitation of MB species on the outer MB/SAz surface.


2016 ◽  
Vol 22 (1) ◽  
pp. 87-98 ◽  
Author(s):  
Nina Zupančič ◽  
Miloš Miler ◽  
Stanka Šebela ◽  
Simona Jarc

AbstractMicro-scale observations in karst caves help to identify different processes that shaped local morphology. Scanning electron microscopy/energy-dispersive X-ray spectroscopy inspection of speleothems from two karst caves in Slovenia, Predjama and Črna Jama, confirmed the presence of sub-angular to sub-rounded detrital fragments of clay minerals, feldspars, quartz, Fe-oxides/hydroxides, rutile and Nb-rutile, xenotime, kassite, allanite, fluorapatite, epidote, ilmenite, monazite, sphene, and zircon, between 2 and 50 μm across. These occur in porous layers separating calcite laminae in the clayey coating on the layer below the surface of the speleothems, and are also incorporated within actual crystals. It is likely that they are derived from the weathered rocks of the Eocene flysch. Probably they were first transported into the caves by floodwaters forming cave sediments. Later, depending upon the climate conditions, they were moved by air currents or by water to the surface of active speleothems. They might also be redeposited from overlying soils enriched with wind-transported minerals from the flysch, or from higher passages filled with weathered flysch sediment, by drip water percolating through the fissured limestone. As some of the identified minerals are carriers of rare earth elements, Ti and Zr, their presence could affect any palaeoclimatic interpretations that are based upon the geochemical composition of the speleothems.


1992 ◽  
Vol 260 ◽  
Author(s):  
J. S. Reid ◽  
R. P. Ruiz ◽  
E. Kolawa ◽  
J. S. Chen ◽  
J. Madok ◽  
...  

ABSTRACTThin films of sputtered, amorphous Ta36Si14N50 (a metallic conductor) and Si3N4 (an insulator) were evaluated as encapsulants for (100)-oriented InP substrates. Thicknesses of both films were approximately 100 nm. During a 15 min annealing in Ar, liberated phosphorus was gettered by a <Si>ISiO2ITa(100 nm) collector placed face-to-face on encapsulated or non-encapsulated InP. The stability of the InP with the encapsulant was characterized by backscattering spectrometry, scanning electron microscopy, and x-ray diffraction. As measured by 4He++ backscattering spectrometry, detectable amounts of phosphorus do not arise in the Ta collectors for the Ta-Si-N and Si3N4 encapsulation schemes until 650 and 700°C, respectively. Failure of the Ta36Si14N50 film is catastrophic at 700°C whereas the Si3N4 film degrades locally commencing at 600°C.


Author(s):  
Hariprasad Reddy Ponnapureddy ◽  
Rama Vara Prasad Chavali ◽  
Rakesh J Pillai

This paper aims at establishing the influence of acidic and alkalinepore fluids on the swell behaviour of an expansive soil. Aseries of laboratory one dimensional free swell tests were performedto study the behaviour of soil in acidic and alkaline environment.Three different concentrations of sodium hydroxide andsulphuric acid solutions were used as pore fluids to understandthe influence of variable concentrations on the swell behaviourof soil. Results showed that, the swelling of soil that interactedwith sodium hydroxide solution initially increased at lower concentrationand then decreased with increase in concentration.In contrast, the swelling initially decreased at lower concentrationof sulphuric acid and then increased with increase inconcentration of solution. The complexity in the swell behaviourof contaminated soil was assessed by thoroughly investigatingthe mineralogy and microstructure alterations by carrying outX-ray diffraction analysis, Scanning electron microscopy andEnergy dispersive analysis of X-ray at the end of interaction.


2021 ◽  
Vol 340 ◽  
pp. 01049
Author(s):  
Anton Loginov ◽  
Alexandr Aparnev

From hydrochloric acid solutions of strontium and tin(IV) by addition of ammonia until pH = 10 was obtained double hydroxide of strontium-tin(IV) SrSn(OH)6. The process of double hydroxide thermolysis and the phase composition of decomposition products were studied by differential thermal analysis, X-ray diffraction and scanning electron microscopy. It is shown that the main dehydration step is completed at a temperatureofnearly350°CandX-rayamorphousproductisformed which converts into the crystalline phase of strontium stannate at a temperature above 650°C.


Author(s):  
Ann Chidester Van Orden ◽  
John L. Chidester ◽  
Anna C. Fraker ◽  
Pei Sung

The influence of small variations in the composition on the corrosion behavior of Co-Cr-Mo alloys has been studied using scanning electron microscopy (SEM), energy dispersive x-ray analysis (EDX), and electrochemical measurements. SEM and EDX data were correlated with data from in vitro corrosion measurements involving repassivation and also potentiostatic anodic polarization measurements. Specimens studied included the four alloys shown in Table 1. Corrosion tests were conducted in Hanks' physiological saline solution which has a pH of 7.4 and was held at a temperature of 37°C. Specimens were mechanically polished to a surface finish with 0.05 µm A1203, then exposed to the solution and anodically polarized at a rate of 0.006 v/min. All voltages were measured vs. the saturated calomel electrode (s.c.e.).. Specimens had breakdown potentials near 0.47V vs. s.c.e.


Author(s):  
Vicki L. Baliga ◽  
Mary Ellen Counts

Calcium is an important element in the growth and development of plants and one form of calcium is calcium oxalate. Calcium oxalate has been found in leaf seed, stem material plant tissue culture, fungi and lichen using one or more of the following methods—polarized light microscopy (PLM), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and x-ray diffraction.Two methods are presented here for qualitatively estimating calcium oxalate in dried or fixed tobacco (Nicotiana) leaf from different stalk positions using PLM. SEM, coupled with energy dispersive x-ray spectrometry (EDS), and powder x-ray diffraction were used to verify that the crystals observed in the dried leaf with PLM were calcium oxalate.


Author(s):  
William P. Wergin ◽  
P. F. Bell ◽  
Rufus L. Chaney

In dicotyledons, Fe3+ must be reduced to Fe2+ before uptake and transport of this essential macronutrient can occur. Ambler et al demonstrated that reduction along the root could be observed by the formation of a stain, Prussian blue (PB), Fe4 [Fe(CN)6]3 n H2O (where n = 14-16). This stain, which is an insoluble precipitate, forms at the reduction site when the nutrient solution contains Fe3+ and ferricyanide. In 1972, Chaney et al proposed a model which suggested that the Fe3+ reduction site occurred outside the cell membrane; however, no physical evidence to support the model was presented at that time. A more recent study using the PB stain indicates that rapid reduction of Fe3+ occurs in a region of the root containing young root hairs. Furthermore the most pronounced activity occurs in plants that are deficient in Fe. To more precisely localize the site of Fe3+ reduction, scanning electron microscopy (SEM), x-ray analysis, and transmission electron microscopy (TEM) were utilized to examine the distribution of the PB precipitate that was induced to form in roots.


Author(s):  
M. L. Zimny ◽  
A. C. Haller

During hibernation the ground squirrel is immobile, body temperature reduced and metabolism depressed. Hibernation has been shown to affect dental tissues varying degrees, although not much work has been done in this area. In limited studies, it has been shown that hibernation results in (1) mobilization of bone minerals; (2) deficient dentinogenesis and degeneration of alveolar bone; (3) presence of calculus and tears in the cementum; and (4) aggrevation of caries and pulpal and apical tooth abscesses. The purpose of this investigation was to study the effects of hibernation on dental tissues employing scanning electron microscopy (SEM) and related x-ray analyses.


Author(s):  
Yun Lu ◽  
David C. Joy

High resolution scanning electron microscopy (SEM) and energy dispersive x-ray analysis (EDXA) were performed to investigate microparticles in blended cements and their hydration products containing sodium-rich chemical wastes. The physical appearance of powder particles and the morphological development at different hydration stages were characterized by using high resolution SEM Hitachi S-900 and by SEM S-800 with a EDX spectrometer. Microparticles were dispersed on the sample holder and glued by 1% palomino solution. Hydrated bulk samples were dehydrated by acetone and mounted on the holder by silver paste. Both fracture surfaces and flat cutting sections of hydrating samples were prepared and examined. Some specimens were coated with an 3 nm thick Au-Pd or Cr layer to provide good conducting surfaces. For high resolution SEM S-900 observations the accelerating voltage of electrons was 1-2 KeV to protect the electron charging. Microchemical analyses were carried out by S800/EDS equipped with a LINK detector of take-off angle =40°.


Sign in / Sign up

Export Citation Format

Share Document