scholarly journals Physical factors for medical rehabilitation of patients with Lyme-borreliosis

2003 ◽  
Vol 2 (3) ◽  
pp. 86-93
Author(s):  
G. G. Ryeshetova ◽  
Ye. V. Titskaya ◽  
T. N. Zaripova ◽  
T. B. Pyerova ◽  
N. M. Shevtsova ◽  
...  
Keyword(s):  
Lyme Borreliosis ◽  
Physical Factor ◽  
The State ◽  
Medical Rehabilitation ◽  
Physical Factors ◽  
Treatment Technology ◽  
Good Tolerance ◽  
Second Stage ◽  
Two Stages

Investigations made on 96 patients with chronic Lyme-borreliosis accompanied with predominant joint affection have allowed to ground scientifically an advisability of two-stages treatment, with administration of physical factor complex at the second stage. A treatment technology has been developed that allowed to improve significantly the state of 82,4% of patients with good tolerance.

scholarly journals Mineralogical Code in Russian Color Names

2021 ◽  
pp. 42-65
Author(s):  
Yu. A. Griber
Keyword(s):  
Demographic Characteristics ◽  
The State ◽  
Russian Language ◽  
Professional Experience ◽  
Second Stage ◽  
Russian Speakers ◽  
Frequency Of Use ◽  
Two Stages ◽  
Comprehensive Study ◽  
Modern Russian

The results of a comprehensive study of color names derived from the names of colored stones in the system of color names of the modern Russian language are presented in the article. The research was conducted in 2018-2020 in two stages using the methods of content analysis and an online psycholinguistic experiment. At the first stage, the state of the semantic group of names of colored stones, potential objects-referents of color names, was assessed by analyzing four different groups of sources: specialized dictionaries of colored stones, dictionaries of color, individual author's dictionaries of color names and explanatory dictionaries of the modern Russian language. At the second stage, the state of the color terms formed from the names of colored stones in the active vocabulary of modern Russian speakers was investigated on the basis of data from an online psycholinguistic experiment, in which 2,457 people aged 16 to 95 took part. The results of a comparative analysis of the lists of colored stones-prototypes of color names in the passive and active dictionaries of the speakers of the modern Russian language are presented. The scope of denotation and the function of color names derived from the names of colored stones are considered. Particular attention is paid to the analysis of the derivative productivity of the names of referent objects of the studied class and the frequency of use of individual color names in the responses of Russian speakers with different socio-demographic characteristics (gender, age, professional experience).

SCHEME FOR IMPLEMENTING ASSISTED CLONING OF AN UNKNOWN THREE-PARTICLE THREE-DIMENSION EQUATORIAL ENTANGLED STATE

2009 ◽  
Vol 07 (03) ◽  
pp. 653-660 ◽  
Author(s):  
PENG-CHENG MA ◽  
YOU-BANG ZHAN
Keyword(s):  
Bell State ◽  
The State ◽  
Entangled State ◽  
Three Dimension ◽  
Maximally Entangled State ◽  
Second Stage ◽  
Unknown State ◽  
State Measurement ◽  
Two Stages ◽  
State Case

In this paper, we proposed a protocol which can produce a perfect copy of an unknown three-particle three-dimension equatorial entangled state with assistance from a state preparer. Two stages were included in this protocol. The first stage requires usual teleportation, after Alice's (the state sender) generalized Bell-state measurement. Bob (the state receiver) can get the original state with a certain probability. In the second stage, after having received Victor's (the state preparer) classical message, and using the rest resource of the teleportation process, the perfect copy of an original unknown state can be produced in Alice's place. Furthermore, we have also investigated that the quantum channel is a non-maximally entangled state case. Alice also can re-establish the original unknown state in the certain probability.

Study the Possibility of Controlling the Magnitude and Distribution of Residual Stress in the Surface Layer of the Product after the Process Double Duplex Burnishing

2016 ◽  
Vol 862 ◽  
pp. 262-269 ◽  
Author(s):  
Radoslaw Patyk ◽  
Łukasz Bohdal ◽  
Agnieszka Kułakowska
Keyword(s):  
Residual Stress ◽  
Surface Layer ◽  
Maximum Stress ◽  
Rolling Process ◽  
Geometrical Parameters ◽  
Treatment Technology ◽  
Second Stage ◽  
Product Surface ◽  
Two Stages ◽  
Maximum Stresses

In the first stage, on the semi-fabrication surface, one embossed regular asperities about needed outline (triangular, rounding, rounding-linear, trapezoid or other) and parameters depending from the needed properties of the article's surface layer. In the second stage the asperities are burnished (smooth burnishing), till the needed asperities equalized. Burnishing rolling process in the duplex type consist of two stages. In the first stage, on the semi-fabrication surface, one embossed regular asperities about needed outline (triangular, rounding, rounding-linear, trapezoid or other) and parameters depending from the needed properties of the article's surface layer. In the second stage the asperities are burnished (smooth burnishing), till the needed asperities equalized. It causes shaping own stresses, which will be occurred on the needed depth. In the dependence from the destination of the parts, it is necessary to give adequate values of the maximum stresses and adequate depth of their occurring. In this aim burnishing rolling process type duplex must be realized repeatedly, but in the next stages of embossing asperities, their height is lower than the previous, and the outline of the asperity and its geometrical parameters depends from the needed layout of the own stress in the product. In the proposed treatment technology, in the finishing (the last) operation of duplex burnishing, it is possible to shaping needed value of the maximum stress (σmax(1)), depth of their layout (h0(1)) and layout of the own stresses, but also shaping needed geometrical structure of the product surface. Analysis of the possibility of own stresses steering can be realized by changing factors: regular outline of the asperity (triangular, rounding, rounding-linear) and their parameters (height, vertical angle, rounding radius), asperities space, depth of pile and smooth burnishing, number of upcoming one by one crossing in hybrid burnishing (embossing of asperity and their burnishing), position of the burnishing tools in the next steps. The article presents the results of experimental and numerical (using FEM) of a double burnishing duplex in terms of the possibility of controlling the magnitude and distribution of residual stress in the surface layer products.

scholarly journals Method of Abdominal Cavity Postoperative Infiltrates Treatment in Children with Appendiceal Peritonitis

2016 ◽  
Vol 23 (3) ◽  
Author(s):  
M. G. Melnichenko ◽  
V. V. Antoniuk ◽  
L. P. Tkachenko
Keyword(s):  
Abdominal Cavity ◽  
Physical Factors ◽  
Utility Model ◽  
Second Stage ◽  
Abdominal Region ◽  
Two Stages ◽  
The Impact ◽  
Rectal Suppositories

Treatment of postoperative abdominal infiltrates in children operated on appendicular peritonitis with the use of antibiotics and physical factors on the abdominal region according to the utility model includes two stages. The first stage involves regional antibacterial electrophoresis and therapeutic antibacterial microclysters. The second stage includes the impact of diadynamic therapy in infiltration projection and NSAIDs as rectal suppositories.

Altered Fine Structure of B Lymphocytes Correlated with Defective Terminal Differentiation

1973 ◽  
Vol 31 ◽  
pp. 386-387
Author(s):  
Dale E. Bockman ◽  
L. Y. Frank Wu ◽  
Alexander R. Lawton ◽  
Max D. Cooper
Keyword(s):  
Immune Deficiency ◽  
B Lymphocytes ◽  
Plasma Cells ◽  
Present Report ◽  
Specific Antigen ◽  
Terminal Differentiation ◽  
Second Stage ◽  
Two Stages ◽  
Deficiency Diseases ◽  
Cell Line Generation

B-lymphocytes normally synthesize small amounts of immunoglobulin, some of which is incorporated into the cell membrane where it serves as receptor of antigen. These cells, on contact with specific antigen, proliferate and differentiate to plasma cells which synthesize and secrete large quantities of immunoglobulin. The two stages of differentiation of this cell line (generation of B-lymphocytes and antigen-driven maturation to plasma cells) are clearly separable during ontogeny and in some immune deficiency diseases. The present report describes morphologic aberrations of B-lymphocytes in two diseases in which second stage differentiation is defective.

Distributed Entropy Energy-Efficient Clustering algorithm for cluster head selection (DEEEC)

2020 ◽  
Vol 39 (6) ◽  
pp. 8139-8147
Author(s):  
Ranganathan Arun ◽  
Rangaswamy Balamurugan
Keyword(s):  
Energy Efficient ◽  
Clustering Algorithm ◽  
Cluster Head ◽  
Residual Energy ◽  
Energy Utilization ◽  
Sensor Nodes ◽  
Second Stage ◽  
Energy Efficient Clustering ◽  
Two Stages ◽  
Ch Selection

In Wireless Sensor Networks (WSN) the energy of Sensor nodes is not certainly sufficient. In order to optimize the endurance of WSN, it is essential to minimize the utilization of energy. Head of group or Cluster Head (CH) is an eminent method to develop the endurance of WSN that aggregates the WSN with higher energy. CH for intra-cluster and inter-cluster communication becomes dependent. For complete, in WSN, the Energy level of CH extends its life of cluster. While evolving cluster algorithms, the complicated job is to identify the energy utilization amount of heterogeneous WSNs. Based on Chaotic Firefly Algorithm CH (CFACH) selection, the formulated work is named “Novel Distributed Entropy Energy-Efficient Clustering Algorithm”, in short, DEEEC for HWSNs. The formulated DEEEC Algorithm, which is a CH, has two main stages. In the first stage, the identification of temporary CHs along with its entropy value is found using the correlative measure of residual and original energy. Along with this, in the clustering algorithm, the rotating epoch and its entropy value must be predicted automatically by its sensor nodes. In the second stage, if any member in the cluster having larger residual energy, shall modify the temporary CHs in the direction of the deciding set. The target of the nodes with large energy has the probability to be CHs which is determined by the above two stages meant for CH selection. The MATLAB is required to simulate the DEEEC Algorithm. The simulated results of the formulated DEEEC Algorithm produce good results with respect to the energy and increased lifetime when it is correlated with the current traditional clustering protocols being used in the Heterogeneous WSNs.

Analisis Kebutuhan Petunjuk Praktikum Berbasis Keterampilan Proses Sains untuk Mencapai Kemampuan Merancang Eksperimen

2019 ◽  
Vol 2 (2) ◽  
Author(s):  
Fitriah Khoirunnisa ◽  
Friska Septiani Silitonga ◽  
Veri Firmansyah
Keyword(s):  
Core Competence ◽  
Process Skills ◽  
Learning Materials ◽  
Science Process Skills ◽  
Second Stage ◽  
The Core ◽  
The Core Competence ◽  
Two Stages ◽  
Practical Instruction ◽  
Design Experiments

Penelitian ini bertujuan menganalisis kebutuhan petunjuk praktikum berbasis Keterampilan Proses Sains (KPS) untuk mencapai kemampuan merancang eksperimen pada materi kalor reaksi kalorimetri. Penelitian dilakukan terhadap peserta didik kelas XI SMA Negeri 2 Kota Tanjungpinang. Variabel penelitian mencakup analisis kebutuhan bahan ajar dan analisis kesesuaian Kompetensi Inti (KI) dan Kompetensi Dasar (KD). Jenis penelitian yang dilakukan adalah penelitian deskriptif kualitatif. Tahapan pertama dalam penelitian ini adalah menganalisis kebutuhan bahan ajar dengan cara membandingkan dua petunjuk praktikum yang selama ini telah digunakan di sekolah tersebut, ditinjau dari aspek struktur format penulisan, aspek kreativitas, dan aspek keterampilan proses sains yang terdapat dalam petunjuk praktikum. Sehingga didapatkan kesimpulan bahwa petunjuk praktikum yang selama ini digunakan tidak memberikan kesempatan kepada peserta didiknya untuk merancang eksperimen yang telah ditentukan. Tahapan kedua yaitu menganalisis kesesuaian kompetensi inti dan kompetensi dasar, yang bertujuan untuk menentukan indikator pencapaian kompetensi (IPK) yang akan menjadi acuan dalam mengembangkan petunjuk praktikum berbasis keterampilan proses sains. Dari kedua tahapan yang telah dilakukan maka dapat disimpulkan bahwa peserta didik memerlukan petunjuk praktikum yang mampu mengonstruksi pikiran dan mengaktifkan kinerja mereka, sehingga pendekatan Keterampilan Proses Sains menjadi pilihan dalam mengembangkan petunjuk praktikum yang sesuai dengan karakteristik kurikulum 2013.   This research aims to analyze the needs of Science Process Skills based Practical Instruction to achieve the ability to design experiments on the calor of reaction. This research was done to the students of class XI SMA Negeri 2 Tanjungpinang City. Research Variable includes the analysis of the needs of the learning materials and analysis of the suitability of the Core Competence (KI) and Basic Competence (KD). The type of research conducted is descriptive qualitative research. The first stages in this research is to analyze the needs of learning materials by comparing two practical instructions that had been implementing in the school, from the aspects of the structure of writing format, creativity, and science process skills embedded in practical instructions. The conclusion of this research that current practical instructions does not give an opportunity to the participants to design determined experiments. The second stage, namely analyzing the suitability of core competence and basic competence, which aims to determine the indicators of achievement of the competencies (GPA) which will be a reference in developing process skills-based teaching instructions science. Of the two stages that has been done then it can be concluded that learners need practical instructions to construct  thinking and and their performance, so the Science Process Skills approach is an option in developing practical instruction suitable for the characteristics of the curriculum of 2013.

ESTIMATING GAS AND ROCK OUTBURST RISK ON THE BASIS OF KNOWLEDGE AND EXPERIENCE – THE EXPERT SYSTEM BASED ON FUZZY LOGIC

2014 ◽  
Vol 59 (1) ◽  
pp. 41-52 ◽  
Author(s):  
Norbert Skoczylas
Keyword(s):  
Fuzzy Logic ◽  
Expert System ◽  
Mining Industry ◽  
Automatic Assessment ◽  
Science Field ◽  
Second Stage ◽  
Two Stages ◽  
Outburst Hazard

Abstract The Author endeavored to consult some of the Polish experts who deal with assessing and preventing outburst hazards as to their knowledge and experience. On the basis of this knowledge, an expert system, based on fuzzy logic, was created. The system allows automatic assessment of outburst hazard. The work was completed in two stages. The first stage involved researching relevant sources and rules concerning outburst hazard, and, subsequently, determining a number of parameters measured or observed in the mining industry that are potentially connected with the outburst phenomenon and can be useful when estimating outburst hazard. Then, the Author contacted selected experts who are actively involved in preventing outburst hazard, both in the industry and science field. The experts were anonymously surveyed, which made it possible to select the parameters which are the most essential in assessing outburst hazard. The second stage involved gaining knowledge from the experts by means of a questionnaire-interview. Subjective opinions on estimating outburst hazard on the basis of the parameters selected during the first stage were then systematized using the structures typical of the expert system based on fuzzy logic.

Integrated assessment and mapping of the environmental situation in the Russian Federation regions

2017 ◽  
Vol 924 (6) ◽  
pp. 6-16
Author(s):  
V.S. Tikunov ◽  
O.Yu. Chereshnia
Keyword(s):  
Russian Federation ◽  
Pollution Index ◽  
Pollution Level ◽  
Anthropogenic Pressure ◽  
Environmental Capacity ◽  
Environmental Friendliness ◽  
Second Stage ◽  
Environmental Situation ◽  
The Russian Federation ◽  
Two Stages

The article presents a methodology for a comprehensive assessment of the environmental situation in Russian Federation regions based on the pollution index and the index of the ecological tension. The evaluation was carried out in two stages. At the first stage, the degree of pollution of the atmosphere, hydrosphere and lithosphere of the regions was estimated on the basis of the emission of pollutants into the atmosphere, departing from stationary sources, the formation of solid domestic wastes (SDW) and the discharge of contaminated wastewater. Based on these three indicators, a pollution index was constructed that estimates aggregate pollution level. In the second stage, the authors made the estimation of loads generated by atmospheric emissions, solid waste and waste water discharged into the territory of each region, per capita and in relation to the environmental capacity of the economy. This allows us to take into account the area of pollution, anthropogenic pressure and environmental responsibility of the population, as well as the environmental friendliness of production. On the basis of relative indicators, the index of ecological tension was created.

Sign in / Sign up

Export Citation Format

Share Document