scholarly journals The stability of major and trace element concentrations from musts to Champagne during the production process

OENO One ◽  
2022 ◽  
Vol 56 (1) ◽  
pp. 29-40
Author(s):  
Robin Cellier ◽  
Sylvain Berail ◽  
Ekaterina Epova ◽  
Julien Barre ◽  
Fanny Claverie ◽  
...  

Thirty-nine Champagnes from six different brands originating from the AOC Champagne area were analyzed for major and trace element concentrations in the context of their production processes and in relation to their geographical origins. Inorganic analyses were performed on the must (i.e., grape juice) originating from different AOC areas and the final Champagne. The observed elemental concentrations displayed a very narrow range of variability. Typical concentrations observed in Champagne are expressed in mg/L for elements such as K, Ca, Mg, Na, B, Fe, A, and Mn. They are expressed in µg/L for trace elements such as Sr, Rb, Ba, Cu, Ni, Pb Cr and Li in decreasing order of concentrations. This overall homogeneity was observed for Sr and Rb in particular, which showed a very narrow range of concentrations (150 < Rb < 300 µg/L and 150 < Sr < 350 µg/L) in Champagne. The musts contained similar levels of concentration but showed slightly higher variability since they are directly influenced by the bedrock, which is quite homogenous in the AOC area being studied. Besides the homogeneity of the bedrock, the overall stability of the concentrations recorded in the samples can also be directly linked to the successive blending steps, both at the must level and prior to the final bottling. A detailed analysis of the main additives, sugar, yeast and bentonite, during the Champagne production process, did not show a major impact on the elemental signature of Champagne.

1996 ◽  
Vol 06 (03n04) ◽  
pp. 517-522 ◽  
Author(s):  
YOSHINORI KOSHIKAWA ◽  
NOBUAKI ARAI ◽  
WATARU SAKAMOTO ◽  
KOJI YOSHIDA

Trace element concentrations in short necked clam Ruditapes philippinarum marked shells with iron rusting were determined by particle induced X-ray emission (PIXE) method. Element such as Ca, Mn, Fe, Zn, Sr, and Br were detected in the shells. The Fe/Ca X-ray intensity ratio decreased exponentially on the day after marking. It was concluded that the higher Fe concentration on marked clams was caused by attached iron rusting. The concentrations of Fe, Br, and Sr differed among the 3 stations (Kamaya, Shigaki, and Iwatani), suggesting that elemental concentrations may be related to the growth of clams.


Author(s):  
Diana Flood

Migratory fish-eating birds occupy the highest trophic positions of aquatic ecosystems and as such serve as invaluable end-point indicators of the presence and bioaccumulation of anthropogenic contaminants. The birds’ main route of contaminant exposure is through food consumption. Migration can complicate this pathway by introducing numerous feeding habitats and thus, potential sources of contamination. Birds possess a number of depuration mechanisms that permit them to reduce their contaminant burden, namely the elimination of metals and mercury (Hg) through their feathers, feces and eggs. Trace element concentrations found in the feathers reflect the contaminants circulating in the body at the time of feather growth, representing local exposure and potential mobilization from internal tissues. Molt schedules and patterns are important considerations when selecting feathers to link feeding ecology with contaminants, as migratory birds’ feathers grow on and represent different sites. Stable nitrogen (δ15N) and carbon (δ13C) and hydrogen isotopes (δD) can reveal feeding ecology and habitat use during their annual cycle. Consequently, anthropogenic and natural sources of metal accumulation can be linked to those ecological variables. This study will examine the assimilation of trace element in male Caspian Tern (Sterna caspia) and Double-crested Cormorant (Phalacrocorax auritus) breast feathers grown on wintering sites and stable isotope signatures will be used to determine origin of contaminants. The aims for this study are to determine (i) whether isotopic signatures of feathers grown on wintering sites can explain variations in feather trace element concentrations, (ii) whether isotopes can determine the source of contamination, and (iii) whether differences in trace elements between individuals are determined by location of wintering ground or species.


1976 ◽  
Vol 10 (2) ◽  
pp. 74-76 ◽  
Author(s):  
Richard P. Hoffmann ◽  
Daniel M. Ashby

The use of trace-elements in intravenous hyperalimentation solutions has been recommended for long-term therapy. Very little information is available concerning the presence of these nutrients as contaminants in commercially available solutions. In view of this, the concentrations of copper and zinc were measured in twenty solutions by atomic absorption. The results indicate that the amounts present may be significant in certain solutions.


2019 ◽  
Vol 486 (5) ◽  
pp. 613-619
Author(s):  
M. Yu. Semenov ◽  
V. A. Snytko ◽  
Yu. M. Semenov ◽  
A. V. Silaev ◽  
L. N. Semenova

The metal composition of water and bottom sediments of southern Lake Baikal tributaries was studied and the water migration coefficients for micro- and trace elements were calculated. The map showing the study area divided into zones according to their ability to provide the certain water quality was drawn. The significant differences in mineralization, macro- and trace element composition between Lake Baikal water and tributary waters were found out. It was shown that values of water migration coefficients calculated for macro elements are similar in southern and main tributaries whereas coefficient values calculated for trace elements are quite different. This is due to dissolved matter sources such as rocks and deep ground waters which chemical composition is not typical for landscapes of Lake Baikal basin. The contribution of southern tributaries to macro element composition of lake water is between 7 and 15%, whereas tributaries contribution to trace element composition can hardly be evaluated because of higher element concentrations in riverine waters. The lower trace element concentrations in lake water with respect to riverine one is due to trace element migration in the form of complex organic compounds: long water residence time in lake favors to organic compounds decay by means of microbial- and photo-degradation followed by metal precipitation.


2021 ◽  
Author(s):  
◽  
Monique Francis Holmes

<p>Heavy metals in the marine environment are a worldwide issue due to their toxicity, non-biodegradability and their ability to accumulate and magnify in organisms. Increased human activity has caused higher inputs of heavy metals, resulting in escalated pressures on delicate coastal ecosystems. A means of assessing the natural environment and how it is changing in response to pollution and other environmental degradation is through the use of biological indicator or biomonitor species. These organisms provide information on the bioavailability of metals present in the environment. In recent years amphipods, a diverse order of small crustaceans, have been increasingly used as bioindicators of disturbed aquatic communities. They are widespread and important components of many food webs, and likely to be frequently exposed to metal contamination through both sediment and seawater. The aim of this research was two-fold: 1) to use amphipods to examine variation across sites and species in concentration of 20+ trace elements and 2) to examine whether the uptake of two metals, copper (Cu) and neodymium (Nd), is mediated by the presence of the other metal or an elevated seawater temperature.  To investigate variation of trace element concentrations across sites, the amphipod Eusiroides monoculoides was collected from three sites in the Wellington region, approximately 5 km apart: Oriental Bay, Evans Bay and Point Halswell. To investigate differences amongst species comparisons were made between Eusiroides monoculoides, Apohyale papanuiensis and Sunamphitoe mixtura when they occurred at the same site. Analysing the trace element concentrations of 36 metals was done using an Inductively Coupled Mass Spectrometer (ICPMS). Overall, although these sites were not greatly distant from each other, there were differences among sites. Evans Bay in general had the highest concentration of trace elements. Further, there were also species-specific differences and S. mixtura was the species with the highest concentration of trace elements. There was also a size effect, where the average dry weight of S. mixtura was negatively related to the concentration of trace elements in the body.  To assess the effects of heavy metals Cu and Nd in both an ambient (14 °C) and elevated (20 °C) temperature, an experiment was run at Victoria University’s Coastal Ecology Lab (VUCEL). Sand hoppers, Bellorchestia quoyana, were collected from a single site in Wellington (Scorching Bay) and assigned to eight treatments: ambient and warm controls in raw seawater and ambient and warm seawater doped with Cu, Nd and Cu and Nd together. Amphipods from treatments with Cu and Nd added had significantly higher concentrations of these metals from the controls, however temperature had no effect, and neither was there an interaction between the metals. Similar to S. mixtura from the field study, dry weight of B. quoyana was negatively related to the concentration of trace elements in the body.  Results from this work demonstrate that when using amphipods as bioindicator species it is important to consider species and size specific effects. This thesis also provides baseline data for 20+ elements from three Wellington sites and demonstrates that there can be unexpected variation across relatively small spatial scales. The laboratory experiment did not yield results that coincided with the consensus of the literature. The experiment showed that at least in this case, temperature did not mediate the uptake of metals and there was a negative relationship between size and metal uptake.</p>


Animals ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 1052
Author(s):  
Yolanda Cedeño ◽  
Marta Miranda ◽  
Inmaculada Orjales ◽  
Carlos Herrero-Latorre ◽  
Maruska Suárez ◽  
...  

This study was designed (i) to establish reference ranges for the essential trace element and background levels of toxic element exposure in the healthy/normal dog population, and (ii) to evaluate whether trace element concentrations vary in dogs suffering from different pathologies. Blood serum samples were collected from 187 healthy and diseased dogs at the Veterinary Teaching Hospital, Faculty of Veterinary Medicine, University of Santiago de Compostela (northwest Spain). The samples were acid digested, and the concentrations of trace elements (Co, Cr, Cu, Fe, Mn, Mo, Ni, Se and Zn) and toxic elements (As, Cd, Hg and Pb) were determined by inductively coupled plasma-mass spectrometry (ICP-MS). This enabled us to establish reference ranges for the essential trace elements and the level of toxic element exposure in dogs, and to identify several clinical situations associated with variations in trace elements in serum. Relative to concentrations in healthy control dogs, statistically significant differences were observed in the concentrations of Cu (significantly higher in hepatic, inflammatory/infectious and oncological categories), Mo (significantly higher in renal category), Se (significantly lower in gastrointestinal category) and Zn (significantly lower in gastrointestinal, inflammatory/infectious and renal categories). Trace element concentrations can be a cause or consequence of disease, and the study findings indicate that trace element determination in serum provides useful information on the pathogenesis of certain diseases. Further research on the serum concentrations of trace elements, particularly in relation to other biochemical parameters and diagnostic tools, may provide valuable information for the diagnosis of diseases in dogs and the disease prognosis.


2017 ◽  
Author(s):  
Niels J. de Winter

Abstract. Bivalve shells record changes in their environment in the chemical composition of their shells and are frequently used as paleoclimate archives. However, many studies have shown that physiological changes related to growth of the bivalve may overprint these chemical tracers. In the present study, a new approach is presented that models growth and development of bivalve shells without a priori knowledge of the physiology of the species. The model uses digitized growth increments in a cross section of the shell together with basic assumptions of the shape of the shell in order to model changes in shell length, thickness, volume, mass and growth rate at a daily resolution through the lifetime of the bivalve. This approach reconstructs the growth history of bivalves based on their shell without the need for a culture experiment, paving the way for growth rate estimations based on fossil bivalve shells. Combination of the growth model with 2D X-Ray Fluorescence trace element mapping allows the incorporation of trace elements into the shell to be modelled in 3D through the bivalve's lifetime. This approach yields records of integrated total-shell trace element concentrations and accumulation rates, which shed light on the rates and mechanisms by which these trace elements are incorporated into the shells of bivalves. Application of growth and trace element modelling on a set of modern pacific oyster shells of well-known origin and comparison of model results with conventional trace element transects highlights the importance of considering heterogeneity in mineralogy, mineralization rates and chemical composition within the shells of bivalves. These insights lead to a better understanding of the complexity of trace element concentrations in bivalve shells, which can then be applied as proxies for the reconstruction of sub-annual changes in palaeoenvironmental conditions over geological timescales.


Author(s):  
E M Tanvir ◽  
Karen M Whitfield ◽  
Jack C Ng ◽  
P Nicholas Shaw

Abstract Essential and nonessential element concentrations in human blood provide important information on the nutritional status of individuals and can assist in the screening or diagnosis of certain disorders and their association with other causative factors. A simple and sensitive method, suitable for use with small sample volumes, for quantification of multiple trace element concentrations in whole blood and plasma has been developed using inductively coupled plasma-mass spectrometry. Method validation was performed using standard reference materials of whole blood and serum using varying sample treatments with nitric acid, water and hydrogen peroxide. The method was applied to quantify the trace element concentrations in whole blood and plasma samples (0.1 mL) from 50 adult blood donors in Queensland. The whole blood sample (5 mL) was collected in Vacutainer tubes with K2EDTA as anticoagulant. The developed method was able to quantify, in blood and plasma samples over a wide range of concentrations, several essential elements: cobalt, copper, zinc, iron, manganese and selenium; the nutritionally probably essential elements vanadium and strontium; and nonessential elements including lead, cadmium, arsenic, caesium, barium, thallium and uranium. Significant differences (P &lt; 0.0001) were observed between whole blood and plasma concentrations for 13 elements; 5 of the measured elements, cobalt (0.49 vs. 0.36 μg/L), copper (1.0 vs. 0.75 mg/L), strontium (28 vs. 16 μg/L), barium (1.5 vs. 0.64 μg/L) and thallium (0.06 vs. 0.03 μg/L), had higher mean concentrations in plasma than in blood. Whole blood concentrations of nine trace elements were significantly correlated (P &lt; 0.0001) with plasma concentrations. The distribution of the trace elements between human blood and plasma varied considerably for the different elements. These results indicate that, using a small sample volume, this assay is suitable for the evaluation of nutritional status as well as in monitoring human toxic elemental exposures.


2021 ◽  
Vol 11 (3) ◽  
pp. 1104
Author(s):  
Elżbieta Rytel ◽  
Agnieszka Tajner-Czopek ◽  
Agnieszka Kita ◽  
Agnieszka Tkaczyńska ◽  
Alicja Z. Kucharska ◽  
...  

The stability of acylated anthocyanins is still a new and unexplored subject of study. The changes in the contents of individual anthocyanins in colored-flesh potato tubers during processing have rarely been addressed in the literature. The aim of the present study was to determine how anthocyanin degradation and profiles are influenced in potatoes of the red-fleshed Herbie 26 variety by different methods of processing. Potato samples were divided into four categories to be analyzed, namely, raw material, potato cubes, French fries, and chips. The dried cubes, French fries, chips, semi-finished products, and finished products, obtained through laboratory processing, were examined for anthocyanin content and composition. The production process of cubes, chips, and French fries led to losses of the examined anthocyanins; however, these losses differed depending on the technological stage. The greatest losses of these compounds were determined after the final production processes, i.e., pre-frying, frying, and drying. Chip production led to the lowest losses of anthocyanins. Omitting the blanching stage in chip production allowed the retention of more anthocyanins. Pelargonidin-3-feruloylrutinoside-5-glucoside, having the highest percentage in the raw material (approximately 50%), followed by pelargonidin-3-caffeoylrutinoside-5-glucoside, proved to be the most thermally stable.


2018 ◽  
Vol 1 (1) ◽  
pp. a8-15
Author(s):  
LAURA DINES NGAU ◽  
BOON SIONG WEE ◽  
NAZARATUL ASHIFA ABD SALIM

Trace elements play a significant role in giving nutritional benefits to the body because they act as essential cofactors for all physiological processes. However, there are some trace elements which may bring more harm than good when entering the human body. Due to its ability to incorporate trace elements in an amount that is proportional to an individual’s dietary intake and environmental exposure, human fingernails are suitable biomarkers in assessing the health status of an individual as they reflect on the trace element concentration present in the body. This study has analysed fingernail samples of 23 adult females residing in Kuching and Kota Samarahan, Sarawak, Malaysia for four elements, namely Cd, Cu, Pb and Zn. By using flame atomic absorption spectroscopy (FAAS), the mean elemental concentrations found in fingernail samples of research participants were 171.8 ± 33.8 μg/g for Zn, 27.8 ± 14.8 μg/g for Cu and 2.64 ± 0.94 μg/g for Pb. Cd concentrations were not able to be detected as they were below the detection limits. A standard reference material, NIST 1568b Rice Flour was used to verify the methods used in elemental analysis using FAAS. Independent t-test which was used to compare the means of Zn and Cu between vegetarians and non-vegetarians showed no significant differences for both elements. Moreover, correlation analysis showed negative correlations between Cu/Zn pair and Pb/Zn pair, whereas significant positive correlation was obtained for Cu/Pb pair. The overall data from this study showed good agreements with data obtained from studies in other countries. Therefore, the current data in this study represents the latest background elemental concentrations in fingernails of the residents in Kuching and Kota Samarahan, Sarawak.Keywords: Adult females, fingernails, flame atomic absorption spectroscopy (FAAS), trace elements


Sign in / Sign up

Export Citation Format

Share Document