scholarly journals Electrode Cooling Effect on Out-of-Phase Electrothermal Streaming in Rotating Electric Fields

2017 ◽  
Author(s):  
Weiyu Liu ◽  
Yukun Ren ◽  
Ye Tao ◽  
Xiaoming Chen ◽  
Qisheng Wu
Keyword(s):  
Electric Field ◽  
Electric Fields ◽  
Heat Dissipation ◽  
Electrode Array ◽  
Substrate Material ◽  
Microfluidic Chips ◽  
Metal Electrodes ◽  
Bulk Fluid ◽  
Dependent Flow ◽  
Electrothermal Flow

In this work, we focus on investigating electrothermal flow in a rotating electric field (ROT-ETF), with primary attention paid to the horizontal traveling-wave electrothermal (TWET) vortex induced at the center of the electric field. The frequency-dependent flow profiles in the microdevice are analyzed using different heat transfer models. Accordingly, we address in particular the importance of electrode cooling in ROT-ETF as metal electrodes of high thermal conductivity while substrate material of low heat dissipation capability are employed to develop such microfluidic chips. Under this circumstance, cooling of electrode array due to external natural convection on millimeter-scale electrode pads for external wire connection occurs and makes the internal temperature maxima shift from the electrode plane to a bit of distance right above the cross-shaped interelectrode gaps, giving rise to reversal of flow rotation from a typical repulsion-type to attraction-type induction vortex, which is in good accordance with our experimental observations of co-field TWET streaming at frequencies on the order of reciprocal charge relaxation time of the bulk fluid. These results point out a way to make a correct interpretation of out-of-phase electrothermal streaming behavior, which holds great potential for handing high-conductivity analytes in modern microfluidic systems.

Electric Field-Assisted Positioning of Neurons on Pt Microelectrode Arrays

2003 ◽  
Vol 773 ◽  
Author(s):  
Shalini Prasad ◽  
Mo Yang ◽  
Xuan Zhang ◽  
Yingchun Ni ◽  
Vladimir Parpura ◽  
...  
Keyword(s):  
Electric Field ◽  
Electrical Activity ◽  
Electric Fields ◽  
Microelectrode Array ◽  
Electrode Array ◽  
Sprague Dawley ◽  
A Cell ◽  
Neuron Patterning

AbstractCharacterization of electrical activity of individual neurons is the fundamental step in understanding the functioning of the nervous system. Single cell electrical activity at various stages of cell development is essential to accurately determine in in-vivo conditions the position of a cell based on the procured electrical activity. Understanding memory formation and development translates to changes in the electrical activity of individual neurons. Hence, there is an enormous need to develop novel ways for isolating and positioning individual neurons over single recording sites. To this end, we used a 3x3 multiple microelectrode array system to spatially arrange neurons by applying a gradient AC field. We characterized the electric field distribution inside our test platform by using two dimensiona l finite element modeling (FEM) and determined the location of neurons over the electrode array. Dielectrophoretic AC fields were utilized to separate the neurons from the glial cells and to position the neurons over the electrodes. The neurons were obtained from 0-2-day-old rat (Sprague-Dawley) pups. The technique of using electric fields to achieve single neuron patterning has implications in neural engineering, elucidating a new and simpler method to develop and study neuronal activity as compared to conventional microelectrode array techniques.

Controlled Separation and Trapping of Particles Using Two-frequency DEP

2005 ◽  
Author(s):  
Sophie Loire ◽  
Yanting Zhang ◽  
Frederic Bottausci ◽  
Noel C. MacDonald ◽  
Igor Mezic
Keyword(s):  
Electric Field ◽  
Electric Fields ◽  
Traveling Wave ◽  
Electrode Array ◽  
Theoretical Work ◽  
Single Frequency ◽  
Ac Electroosmosis ◽  
Biomedical Analysis ◽  
Precise Control ◽  
Flow Effects

We present numerical simulations and experiments on dielectrophoretic (DEP) separation and trapping performed in a titanium-based microchannel linear electrode array. The use of electric fields and in particular dielectrophoresis (DEP) have a great potential to help miniaturize and increase the speed of biomedical analysis. Precise control and manipulation of micro/nano/bio particles inside those miniaturized devices depend greatly on our understanding of the phenomena induced by AC electric fields inside microchannels and how we take advantage of them. The studied DEP devices are composed of two parts: the inter-digitated titanium electrodes and the channel. The electrode substrate is constituted of two layers to form 4-phase traveling wave. Each electrode is 20 μm wide and separated from the other by a gap of 20 μm. The channel is 200 μm wide, 50 μm deep and 6 mm long. The device is designed to generate inhomogeneities in electric-field magnitude. This allows positive and negative DEP (p-DEP and n-DEP). Moreover, it can also produce inhomogeneities in electric-field phase, hence authorizing traveling wave DEP (twDEP). It is also capable of inducing two-frequency DEP, in contrast with most of the previous, single-frequency, designs. The advantages of two-frequency DEP were shown by theoretical work (Chang et al. 2003) and permit precise and optimal control of particles movements. We show that fluid flow effects are substantial and can affect the particle motion in a positive (enhanced trapping) and negative (trapping when separation is desired) way. We discuss the effects of AC-electroosmosis, electrothermal and dielectrophoresis combined. We discuss the advantages of two-frequency dielectrophoretic handling of bioparticles. We investigate the limits of particle size that can be accurately controlled.

UNDERSTANDING ELECTRIC INTERACTIONS IN SUSPENSIONS IN GRADIENT AC ELECTRIC FIELDS I: EXPERIMENTAL

2011 ◽  
Vol 25 (07) ◽  
pp. 919-925
Author(s):  
YAN SHEN ◽  
ZHIYONG QIU ◽  
SHIGERU TADA
Keyword(s):  
Electric Field ◽  
Electric Fields ◽  
Corn Oil ◽  
Electrode Array ◽  
Ac Electric Fields ◽  
Ac Electric Field ◽  
Alpha Olefin ◽  
Dilute Suspensions ◽  
Spatially Periodic ◽  
Neutrally Buoyant

When neutrally buoyant poly alpha olefin particles in corn oil were exposed to a gradient ac electric field generated by a spatially periodic electrode array, these particles experienced the negative dielectrophoresis and instability in all the suspensions of concentration range from 0.01% to 5% (v/v). One critical particle concentration was experimentally determined as 1% (v/v) below which the particles in corn oil were segregated to form island-like structures in the lower electric field regions; and above which, particles only formed straight stripes. The island-like structure was suspended in the lowest electric field area. Specially designed experiments with a suspension of 1.126% (v/v) confirmed that there exists particle instability. Anisotropic properties of electric interactions are responsible for particle instability in all the suspensions of different concentrations and island-like structures were formed only in the dilute suspensions in which the particle instability has enough space to be developed.

Flow and Species Transport Control in Grooved Micro-Channels

2005 ◽  
Author(s):  
Jungyoon Hahm ◽  
Ali Beskok
Keyword(s):  
Electric Field ◽  
Electric Fields ◽  
Mixing Time ◽  
Micro Channel ◽  
Complex Flow ◽  
Species Transport ◽  
Micro Channels ◽  
Electric Field Direction ◽  
Transport Control ◽  
Dependent Flow

We demonstrate flow control concepts in a grooved micro-channel using selectively patterned, electroosmotically active surfaces and locally applied electric fields. This framework enables formation of rather complex flow patterns in simple micro-geometries. Ability to vary the electric field magnitude and its polarity also manifests time-dependent flow alterations, which results in flow and species transport control abilities. The results obtained in a single micro-groove constitute the proof of concept for flow and species transport control in an integrated serial micro-fluidic process, where multiple species can be trapped and released in prescribed amounts in a micro-channel with multiple grooves. The groove size determines volume of the entrapped species. In addition, each groove can simultaneously contain one or two species at the same time. The proposed flow and species transport control scheme allows control over the interspecies diffusion and mixing time and length scales by simply adjusting the electric field direction and its magnitude. We envision utilization of flow and species transport in a grooved micro channel, where combinatorial chemistry experiments can be performed using multiple grooves, where each groove can be addressed (filled, emptied or mixed) independently.

scholarly journals Reaction-free concentration gradient generation in spatially non-uniform AC electric fields

2022 ◽  
Author(s):  
Ran An ◽  
Adrienne Minerick
Keyword(s):  
Electric Field ◽  
Electric Fields ◽  
Concentration Gradient ◽  
Electrochemical Techniques ◽  
Hafnium Dioxide ◽  
Ion Concentration ◽  
Concentration Gradients ◽  
Free Concentration ◽  
Bulk Fluid ◽  
Ac Electric Fields

The ability to generate stable, spatiotemporally controllable concentration gradients is critical for both electrokinetic and biological applications such as directional wetting and chemotaxis. Electrochemical techniques for generating solution and surface gradients display benefits such as simplicity, controllability, and compatibility with automation. Here, we present an exploratory study for generating micro-scale spatiotemporally controllable gradients using a reaction-free electrokinetic technique in a microfluidic environment. Methanol solutions with ionic Fluorescein isothiocyanate (FITC) molecules were used as an illustrative electrolyte. Spatially non-uniform alternating current (AC) electric fields were applied using hafnium dioxide (HfO2) coated Ti/Au electrode pairs. Results from spatial and temporal analysis, along with control experiments suggest that the FITC ion concentration gradient in bulk fluid (over 50 µm from the electrode) was established due to spatial variation of electric field density, and was independent of electrochemical reactions at the electrode surface. The established ion concentration gradients depended on both amplitudes and the frequencies of the oscillating AC electric field. Overall, this work reports a novel approach for generating stable and spatiotemporally tunable gradients in a microfluidic chamber using a reaction-free electrochemical methodology.

Modelling and Fabrication of 3-D Carbon-MEMS for Dielectrophoretic Manipulation of Micro/Nanoparticles in Fluids

2009 ◽  
Vol 628-629 ◽  
pp. 435-440 ◽  
Author(s):  
Zi Rong Tang ◽  
M.Rizwan Malik ◽  
Tie Lin Shi ◽  
J. Gong ◽  
L. Nie ◽  
...  
Keyword(s):  
Electric Field ◽  
Electric Fields ◽  
Cross Sections ◽  
Microelectrode Array ◽  
Three Dimensional ◽  
Electrode Array ◽  
Nano Particles ◽  
Nano Technology ◽  
Aspect Ratios ◽  
Carbon Mems

Carbon-MEMS (C-MEMS) have emerged as a new category of devices for micro/nano technology with many potential applications. Dielectrophoretic manipulation of micro/nanoparticles with C-MEMS is studied in this paper. Through electric field distribution modeling in carbon electrode array, we analyze the strongest simulation effect results of electric field in three dimensional (3-D) surface plots depicting the magnitude of electric field in various cross sections at different heights above the channel floor for 2, 10, 30 and 50 μm high carbon electrodes. It is represented here that maximum intensity of electric field generates with the equality between the height above the channel floor and the height of the electrodes. Simulation parameters involved are for dielectrophoretic manipulation of micro/nano particles based on 3-D C-MEMS. The advantages of using 3-D C-MEMS electrodes over other techniques of creating high-throughput systems for dielectrophoretic manipulation environment surrounded by micro/nano horizons are: (i) complex microscale 3-D electrodes with high-aspect ratios can easily be shaped and patterned using conventional lithography (ii) carbon has a high window of stability thus allowing application of higher voltages (iii) there is no need for bulk micromachining or patterning electrodes on multiple planes (iv) the distance between electrodes can precisely be controlled through the lithography process. FEMLAB 3.4 Multiphysics Modeling software (COMSOL, Stockholm, Sweden) is used for the modeling of electric fields and one-layer C-MEMS microelectrode array was fabricated with SU-8 photoresist.

scholarly journals Reaction-free concentration gradient generation in spatially non-uniform AC electric fields

2022 ◽  
Author(s):  
Ran An ◽  
Adrienne Minerick
Keyword(s):  
Electric Field ◽  
Electric Fields ◽  
Concentration Gradient ◽  
Electrochemical Techniques ◽  
Hafnium Dioxide ◽  
Ion Concentration ◽  
Concentration Gradients ◽  
Free Concentration ◽  
Bulk Fluid ◽  
Ac Electric Fields

The ability to generate stable, spatiotemporally controllable concentration gradients is critical for both electrokinetic and biological applications such as directional wetting and chemotaxis. Electrochemical techniques for generating solution and surface gradients display benefits such as simplicity, controllability, and compatibility with automation. Here, we present an exploratory study for generating micro-scale spatiotemporally controllable gradients using a reaction-free electrokinetic technique in a microfluidic environment. Methanol solutions with ionic Fluorescein isothiocyanate (FITC) molecules were used as an illustrative electrolyte. Spatially non-uniform alternating current (AC) electric fields were applied using hafnium dioxide (HfO2) coated Ti/Au electrode pairs. Results from spatial and temporal analysis, along with control experiments suggest that the FITC ion concentration gradient in bulk fluid (over 50 µm from the electrode) was established due to spatial variation of electric field density, and was independent of electrochemical reactions at the electrode surface. The established ion concentration gradients depended on both amplitudes and the frequencies of the oscillating AC electric field. Overall, this work reports a novel approach for generating stable and spatiotemporally tunable gradients in a microfluidic chamber using a reaction-free electrochemical methodology.

Tuning the Electric Field Response of MOFs by Rotatable Dipolar Linkers

2019 ◽  
Author(s):  
Johannes P. Dürholt ◽  
Babak Farhadi Jahromi ◽  
Rochus Schmid
Keyword(s):  
Electric Field ◽  
Electric Fields ◽  
Structural Changes ◽  
Dielectric Behavior ◽  
Two Dimensions ◽  
Dielectric Constants ◽  
Electric Response ◽  
Dipole Strength ◽  
Metal Organic ◽  
Dynamics Simulations

Recently the possibility of using electric fields as a further stimulus to trigger structural changes in metal-organic frameworks (MOFs) has been investigated. In general, rotatable groups or other types of mechanical motion can be driven by electric fields. In this study we demonstrate how the electric response of MOFs can be tuned by adding rotatable dipolar linkers, generating a material that exhibits paralectric behavior in two dimensions and dielectric behavior in one dimension. The suitability of four different methods to compute the relative permittivity κ by means of molecular dynamics simulations was validated. The dependency of the permittivity on temperature T and dipole strength μ was determined. It was found that the herein investigated systems exhibit a high degree of tunability and substantially larger dielectric constants as expected for MOFs in general. The temperature dependency of κ obeys the Curie-Weiss law. In addition, the influence of dipolar linkers on the electric field induced breathing behavior was investigated. With increasing dipole moment, lower field strength are required to trigger the contraction. These investigations set the stage for an application of such systems as dielectric sensors, order-disorder ferroelectrics or any scenario where movable dipolar fragments respond to external electric fields.

scholarly journals Meta-Deflectors Made of Dielectric Nanohole Arrays with Anti-Damage Potential

Photonics ◽  
2021 ◽  
Vol 8 (4) ◽  
pp. 107
Author(s):  
Haichao Yu ◽  
Feng Tang ◽  
Jingjun Wu ◽  
Zao Yi ◽  
Xin Ye ◽  
...  
Keyword(s):  
Electric Field ◽  
Electric Fields ◽  
Laser Cutting ◽  
High Complexity ◽  
Damage Potential ◽  
Optical Components ◽  
Nanohole Arrays ◽  
Intense Light ◽  
Polarization Of Light ◽  
Air Hole

In intense-light systems, the traditional discrete optical components lead to high complexity and high cost. Metasurfaces, which have received increasing attention due to the ability to locally manipulate the amplitude, phase, and polarization of light, are promising for addressing this issue. In the study, a metasurface-based reflective deflector is investigated which is composed of silicon nanohole arrays that confine the strongest electric field in the air zone. Subsequently, the in-air electric field does not interact with the silicon material directly, attenuating the optothermal effect that causes laser damage. The highest reflectance of nanoholes can be above 99% while the strongest electric fields are tuned into the air zone. One presentative deflector is designed based on these nanoholes with in-air-hole field confinement and anti-damage potential. The 1st order of the meta-deflector has the highest reflectance of 55.74%, and the reflectance sum of all the orders of the meta-deflector is 92.38%. The optothermal simulations show that the meta-deflector can theoretically handle a maximum laser density of 0.24 W/µm2. The study provides an approach to improving the anti-damage property of the reflective phase-control metasurfaces for intense-light systems, which can be exploited in many applications, such as laser scalpels, laser cutting devices, etc.

scholarly journals Integrating flexible electronics for pulsed electric field delivery in a vascularized 3D glioblastoma model

2021 ◽  
Vol 5 (1) ◽  
Author(s):  
Marie C. Lefevre ◽  
Gerwin Dijk ◽  
Attila Kaszas ◽  
Martin Baca ◽  
David Moreau ◽  
...  
Keyword(s):  
Electric Field ◽  
Electric Fields ◽  
Flexible Electronics ◽  
Soft Tissues ◽  
Multiphoton Microscopy ◽  
Membrane Integrity ◽  
Tumor Model ◽  
Pulsed Electric Fields ◽  
In Ovo ◽  
Cell Membrane Integrity

AbstractGlioblastoma is a highly aggressive brain tumor, very invasive and thus difficult to eradicate with standard oncology therapies. Bioelectric treatments based on pulsed electric fields have proven to be a successful method to treat cancerous tissues. However, they rely on stiff electrodes, which cause acute and chronic injuries, especially in soft tissues like the brain. Here we demonstrate the feasibility of delivering pulsed electric fields with flexible electronics using an in ovo vascularized tumor model. We show with fluorescence widefield and multiphoton microscopy that pulsed electric fields induce vasoconstriction of blood vessels and evoke calcium signals in vascularized glioblastoma spheroids stably expressing a genetically encoded fluorescence reporter. Simulations of the electric field delivery are compared with the measured influence of electric field effects on cell membrane integrity in exposed tumor cells. Our results confirm the feasibility of flexible electronics as a means of delivering intense pulsed electric fields to tumors in an intravital 3D vascularized model of human glioblastoma.

Sign in / Sign up

Export Citation Format

Share Document