scholarly journals Diazonium Salts: Versatile Molecular Glues for Sticking Conductive Polymers to Flexible Electrodes

2018 ◽  
Author(s):  
Momath Lo ◽  
Rémi Pires ◽  
Karim Diaw ◽  
Diariatou Gningue-Sall ◽  
Mehmet A. Oturan ◽  
...  
Keyword(s):  
Thin Films ◽  
Indium Tin Oxide ◽  
Electrochemical Impedance ◽  
Conductive Polymers ◽  
Protective Coatings ◽  
Thin Layers ◽  
Diazonium Salts ◽  
Power Sources ◽  
Hydrophobic Character ◽  
Soft Electronics

Adhesion of polymers to surfaces is of upmost importance in timely applications such as protective coatings, biomaterials, sensors, new power sources and soft electronics. In this context, this work examines the role of molecular interactions in the adhesion of polypyrrole thin films to flexible Indium Tin Oxide (ITO) electrodes grafted with aryl layers from various diazonium salts, namely 4-carboxybenzenediazonium (ITO-CO2H), 4-sulfonicbenzenediazonium (ITO-SO3H), 4-N,N dimethylbenzenediazonium (ITO-N(CH3)2), 4-aminobenzenediazonium (ITO-NH2), 4-cyanobenzenediazonium (ITO-CN) and 4-N-phenylbenzenediazonium (ITO-NHPh). It was demonstrated that PPy thin layers were adherent to these surfaces, whereas adhesion failure was noted on bare ITO, following simple solvent washing or sonication. Adhesion of the polypyrrole was investigated in terms of the hydrophilic/hydrophobic character of the underlying aryl layer as probed by contact angle measurements. It was found that sulfonic acid doped polypyrrole (PPy-BSA) thin films were preferably deposited on the most hydrophobic surfaces. More importantly, the redox properties and electrochemical impedance of PPy were closely related to the hydrophobic character of the aryl layers. This work demonstrates that diazonium compounds are unique molecular glues for conductive polymers, and permit to tune their interfacial properties. With diazonium-based robust, architectured interfaces, one can design high performance materials for e.g.sensors, printed soft electronics and flexible thermoelectrics.

scholarly journals Diazonium Salts: Versatile Molecular Glues for Sticking Conductive Polymers to Flexible Electrodes

Surfaces ◽  
2018 ◽  
Vol 1 (1) ◽  
pp. 43-58 ◽  
Author(s):  
Momath Lo ◽  
Rémi Pires ◽  
Karim Diaw ◽  
Diariatou Gningue-Sall ◽  
Mehmet A. Oturan ◽  
...  
Keyword(s):  
Thin Films ◽  
Indium Tin Oxide ◽  
Electrochemical Impedance ◽  
Conductive Polymers ◽  
Protective Coatings ◽  
Thin Layers ◽  
Diazonium Salts ◽  
Power Sources ◽  
Hydrophobic Character ◽  
Soft Electronics

Adhesion of polymers to surfaces is of the upmost importance in timely applications such as protective coatings, biomaterials, sensors, new power sources and soft electronics. In this context, this work examines the role of molecular interactions in the adhesion of polypyrrole thin films to flexible Indium Tin Oxide (ITO) electrodes grafted with aryl layers from various diazonium salts, namely 4-carboxybenzenediazonium (ITO-CO2H), 4-sulfonicbenzenediazonium (ITO-SO3H), 4-N,N-dimethylbenzenediazonium (ITO-N(CH3)2), 4-aminobenzenediazonium (ITO-NH2), 4-cyanobenzenediazonium (ITO-CN) and 4-N-phenylbenzenediazonium (ITO-NHPh). It was demonstrated that PPy thin layers were adherent to all aryl-modified surfaces, whereas adhesive failure was noted for bare ITO following simple solvent washing or sonication. Adhesion of polypyrrole was investigated in terms of hydrophilic/hydrophobic character of the underlying aryl layer as probed by contact angle measurements. It was found that sulfonic acid-doped polypyrrole (PPy-BSA) thin films were preferably deposited on the most hydrophobic surfaces. More importantly, the redox properties and electrochemical impedance of PPy were closely related to the hydrophobic character of the aryl layers. This work demonstrates that diazonium compounds are unique molecular glues for conductive polymers and permit to tune their interfacial properties. With robust, diazonium-based architectured interfaces, one can design high performance materials for e.g., sensors, printed soft electronics and flexible thermoelectrics.

scholarly journals Different Electrochemical Sensor Designs Based on Diazonium Salts and Gold Nanoparticles for Pico Molar Detection of Metals

Molecules ◽  
2020 ◽  
Vol 25 (17) ◽  
pp. 3903 ◽  
Author(s):  
Zouhair Ait-Touchente ◽  
Sana Falah ◽  
Erika Scavetta ◽  
Mohamed M. Chehimi ◽  
Rachid Touzani ◽  
...  
Keyword(s):  
Thin Films ◽  
Gold Nanoparticles ◽  
Indium Tin Oxide ◽  
Electrode Surface ◽  
Diazonium Salt ◽  
High Sensitivity ◽  
Diazonium Salts ◽  
Hybrid Nanomaterial ◽  
Ito Electrode ◽  
Hybrid Thin Films

We report a comparison of sensors’ performance of different hybrid nanomaterial architectures modifying an indium tin oxide (ITO) electrode surface. Diazonium salts and gold nanoparticles (AuNPs) were used as building units to design hybrid thin films of successive layers on the ITO electrode surface. Different architectures of hybrid thin films were prepared and characterized with different techniques, such as TEM, FEG-SEM, XPS, and EIS. The prepared electrodes were used to fabricate sensors for heavy metal detection and their performances were investigated using the square wave voltammetry (SWV) method. The comparison of the obtained results shows that the deposition of AuNPs on the ITO surface, and their subsequent functionalization by diazonium salt, is the best performing architecture achieving a high sensitivity in terms of the lower detection limit of pico molar.

Electrical Anisotropy of Thin Metal Films Growing on Dielectric Substrates

2002 ◽  
Vol 7 (2) ◽  
pp. 45-52
Author(s):  
L. Jakučionis ◽  
V. Kleiza
Keyword(s):  
Magnetic Field ◽  
Thin Films ◽  
Uniaxial Anisotropy ◽  
Metal Films ◽  
Thin Layers ◽  
Electrical Anisotropy ◽  
Electrical Field ◽  
Dielectric Substrates ◽  
Unequal Probability ◽  
Conductive Thin Films

Electrical properties of conductive thin films, that are produced by vacuum evaporation on the dielectric substrates, and which properties depend on their thickness, usually are anisotropic i.e. they have uniaxial anisotropy. If the condensate grow on dielectric substrates on which plane electrical field E is created the transverse voltage U⊥ appears on the boundary of the film in the direction perpendicular to E. Transverse voltage U⊥ depends on the angle γ between the applied magnetic field H and axis of light magnetisation. When electric field E is applied to continuous or grid layers, U⊥ and resistance R of layers are changed by changing γ. It means that value of U⊥ is the measure of anisotropy magnitude. Increasing voltage U0 , which is created by E, U⊥ increases to certain magnitude and later decreases. The anisotropy of continuous thin layers is excited by inequality of conductivity tensor components σ0 ≠ σ⊥. The reason of anisotropy is explained by the model which shows that properties of grain boundaries are defined by unequal probability of transient of charge carrier.

Injecting Inter-Layers and the Built-in Potential of Blue Polymer Light-Emitting Diodes

2000 ◽  
Vol 660 ◽  
Author(s):  
Thomas M. Brown ◽  
Ian S. Millard ◽  
David J. Lacey ◽  
Jeremy H. Burroughes ◽  
Richard H. Friend ◽  
...  
Keyword(s):  
Indium Tin Oxide ◽  
Light Emitting Diodes ◽  
Basic Structure ◽  
Thin Layers ◽  
Carrier Injection ◽  
Semiconducting Polymer ◽  
Light Emitting ◽  
Physical Mechanisms ◽  
Organic Solid ◽  
Polymer Light Emitting Diodes

ABSTRACTThe semiconducting-polymer/injecting-electrode heterojunction plays a crucial part in the operation of organic solid state devices. In polymer light-emitting diodes (LEDs), a common fundamental structure employed is Indium-Tin-Oxide/Polymer/Al. However, in order to fabricate efficient devices, alterations to this basic structure have to be carried out. The insertion of thin layers, between the electrodes and the emitting polymer, has been shown to greatly enhance LED performance, although the physical mechanisms underlying this effect remain unclear. Here, we use electro-absorption measurements of the built-in potential to monitor shifts in the barrier height at the electrode/polymer interface. We demonstrate that the main advantage brought about by inter-layers, such as poly(ethylenedioxythiophene)/poly(styrene sulphonic acid) (PEDOT:PSS) at the anode and Ca, LiF and CsF at the cathode, is a marked reduction of the barrier to carrier injection. The electro- absorption results also correlate with the electroluminescent characteristics of the LEDs.

Plasma-assisted deposition of indium tin oxide thin films by sublimation using an anodic vacuum arc discharge

2021 ◽  
pp. 138731
Author(s):  
Bert Scheffel ◽  
Olaf Zywitzki ◽  
Thomas Preußner ◽  
Torsten Kopte
Keyword(s):  
Thin Films ◽  
Tin Oxide ◽  
Indium Tin Oxide ◽  
Arc Discharge ◽  
Vacuum Arc ◽  
Oxide Thin Films

scholarly journals PANI-Based Wearable Electrochemical Sensor for pH Sweat Monitoring

Chemosensors ◽  
2021 ◽  
Vol 9 (7) ◽  
pp. 169
Author(s):  
Francesca Mazzara ◽  
Bernardo Patella ◽  
Chiara D’Agostino ◽  
Maria Giuseppina Bruno ◽  
Sonia Carbone ◽  
...  
Keyword(s):  
Thin Films ◽  
Indium Tin Oxide ◽  
Electrochemical Sensors ◽  
Flexible Substrate ◽  
Sensor Performance ◽  
Non Invasive ◽  
Static Contact ◽  
Sweat Sample ◽  
Constant Potential ◽  
Interference Tests

Nowadays, we are assisting in the exceptional growth in research relating to the development of wearable devices for sweat analysis. Sweat is a biofluid that contains useful health information and allows a non-invasive, continuous and comfortable collection. For this reason, it is an excellent biofluid for the detection of different analytes. In this work, electrochemical sensors based on polyaniline thin films deposited on the flexible substrate polyethylene terephthalate coated with indium tin oxide were studied. Polyaniline thin films were abstained by the potentiostatic deposition technique, applying a potential of +2 V vs. SCE for 90 s. To improve the sensor performance, the electronic substrate was modified with reduced graphene oxide, obtained at a constant potential of −0.8 V vs. SCE for 200 s, and then polyaniline thin films were electrodeposited on top of the as-deposited substrate. All samples were characterized by XRD, SEM, EDS, static contact angle and FT-IR/ATR analysis to correlate the physical-chemical features with the performance of the sensors. The obtained electrodes were tested as pH sensors in the range from 2 to 8, showing good behavior, with a sensitivity of 62.3 mV/pH, very close to a Nernstian response, and a reproducibility of 3.8%. Interference tests, in the presence of competing ions, aimed to verify the selectivity, were also performed. Finally, a real sweat sample was collected, and the sweat pH was quantified with both the proposed sensor and a commercial pH meter, showing an excellent concordance.

scholarly journals High Power Impulse Magnetron Sputtering of In2O3/Sn Cold Sprayed Composite Target

Materials ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1228
Author(s):  
Marcin Winnicki ◽  
Artur Wiatrowski ◽  
Michał Mazur
Keyword(s):  
Thin Films ◽  
Magnetron Sputtering ◽  
High Voltage ◽  
High Power ◽  
Power Supply ◽  
Indium Tin Oxide ◽  
Volume Ratio ◽  
Cold Spraying ◽  
High Voltage Power Supply ◽  
Composite Target

High Power Impulse Magnetron Sputtering (HiPIMS) was used for deposition of indium tin oxide (ITO) transparent thin films at low substrate temperature. A hybrid-type composite target was self-prepared by low-pressure cold spraying process. Prior to spraying In2O3 and oxidized Sn powders were mixed in a volume ratio of 3:1. Composite In2O3/Sn coating had a mean thickness of 900 µm. HiPIMS process was performed in various mixtures of Ar:O2: (i) 100:0 vol.%, (ii) 90:10 vol.%, (iii) 75:25 vol.%, (iv) 50:50 vol.%, and (v) 0:100 vol.%. Oxygen rich atmosphere was necessary to oxidize tin atoms. Self-design, simple high voltage power switch capable of charging the 20 µF capacitor bank from external high voltage power supply worked as a power supply for an unbalanced magnetron source. ITO thin films with thickness in the range of 30–40 nm were obtained after 300 deposition pulses of 900 V and deposition time of 900 s. The highest transmission of 88% at λ = 550 nm provided 0:100 vol. % Ar:O2 mixture, together with the lowest resistivity of 0.03 Ω·cm.

scholarly journals Direct measurement of the thermoelectric properties of electrochemically deposited Bi2Te3 thin films

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Jose Recatala-Gomez ◽  
Pawan Kumar ◽  
Ady Suwardi ◽  
Anas Abutaha ◽  
Iris Nandhakumar ◽  
...  
Keyword(s):  
Thin Films ◽  
Thermoelectric Properties ◽  
Bismuth Telluride ◽  
Indium Tin Oxide ◽  
Seed Layer ◽  
Room Temperature ◽  
Low Cost ◽  
Temperature Dependent ◽  
Temperature Heat ◽  
Electrochemically Deposited

Abstract The best known thermoelectric material for near room temperature heat-to-electricity conversion is bismuth telluride. Amongst the possible fabrication techniques, electrodeposition has attracted attention due to its simplicity and low cost. However, the measurement of the thermoelectric properties of electrodeposited films is challenging because of the conducting seed layer underneath the film. Here, we develop a method to directly measure the thermoelectric properties of electrodeposited bismuth telluride thin films, grown on indium tin oxide. Using this technique, the temperature dependent thermoelectric properties (Seebeck coefficient and electrical conductivity) of electrodeposited thin films have been measured down to 100 K. A parallel resistor model is employed to discern the signal of the film from the signal of the seed layer and the data are carefully analysed and contextualized with literature. Our analysis demonstrates that the thermoelectric properties of electrodeposited films can be accurately evaluated without inflicting any damage to the films.

scholarly journals Improving Performance of CIGS Solar Cells by Annealing ITO Thin Films Electrodes

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Chuan Lung Chuang ◽  
Ming Wei Chang ◽  
Nien Po Chen ◽  
Chung Chiang Pan ◽  
Chung Ping Liu
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Solar Cells ◽  
Indium Tin Oxide ◽  
Copper Indium Gallium Diselenide ◽  
Glass Substrates ◽  
Ito Film ◽  
Ito Thin Films ◽  
Cigs Solar Cells ◽  
Ito Films

Indium tin oxide (ITO) thin films were grown on glass substrates by direct current (DC) reactive magnetron sputtering at room temperature. Annealing at the optimal temperature can considerably improve the composition, structure, optical properties, and electrical properties of the ITO film. An ITO sample with a favorable crystalline structure was obtained by annealing in fixed oxygen/argon ratio of 0.03 at 400°C for 30 min. The carrier concentration, mobility, resistivity, band gap, transmission in the visible-light region, and transmission in the near-IR regions of the ITO sample were-1.6E+20 cm−3,2.7E+01 cm2/Vs,1.4E-03 Ohm-cm, 3.2 eV, 89.1%, and 94.7%, respectively. Thus, annealing improved the average transmissions (400–1200 nm) of the ITO film by 16.36%. Moreover, annealing a copper-indium-gallium-diselenide (CIGS) solar cell at 400°C for 30 min in air improved its efficiency by 18.75%. The characteristics of annealing ITO films importantly affect the structural, morphological, electrical, and optical properties of ITO films that are used in solar cells.

Chemical Vapor Deposition of Sr1−xBaxNb2O6 Thin Films Using Metal Alkoxide Precursors

2000 ◽  
Vol 15 (8) ◽  
pp. 1702-1708
Author(s):  
Ruichao Zhang ◽  
Ren Xu
Keyword(s):  
Thin Films ◽  
Chemical Vapor Deposition ◽  
Vapor Deposition ◽  
Single Phase ◽  
Chemical Vapor ◽  
Deposition Process ◽  
Thin Layers ◽  
Metal Alkoxide ◽  
Stoichiometry Control ◽  
Alkoxide Precursors

A novel two-step metalorganic chemical vapor deposition process was used in this study to prepare Sr1−xBaxNb2O6 (SBN) thin films. Two thin layers of single-phase SrNb2O6 and BaNb2O6 were deposited alternately on a silicon substrate, and the solid solution of SBN was obtained by high-temperature annealing. The stoichiometry control of the SrNb2O6 and the BaNb2O6 thin films was achieved through deposition process control, according to the evaporation characteristics of double metal alkoxide. The evaporation behavior of double metal alkoxide precursors SrNb2(1-OC4H9)12 and BaNb2(1-OC4H9)12 was studied, and the results were compared with the evaporation of single alkoxide Nb(1-OC4H9)5.

Sign in / Sign up

Export Citation Format

Share Document