scholarly journals Analisa Isolasi Pipa Generator Mesin Stirling Tipe Alpha Sudut Fasa 180°

2021 ◽  
Vol 6 (1) ◽  
pp. 1-7
Author(s):  
Dhimas Satria ◽  
Rina Lusiani ◽  
Erny Listijorini ◽  
Aswata
Keyword(s):  
Heat Loss ◽  
Phase Angle ◽  
Stirling Engine ◽  
Compression Process ◽  
Stirling Cycle ◽  
Compression Speed ◽  
Stirling Engines ◽  
Pipe Insulation ◽  
Alpha Type ◽  
The Ideal

This research is a development of previous research, where in the previous research, a design innovation was carried out on an alpha-type stirling engine by making the phase angle to 180o, with the aim of reducing the effect when the cold cylinder is compressed, because the phase angle currently used is (90o) with disadvantages, namely the cold cylinder is perpendicular to the top, so that the compression process against gravity. But in previous studies, the generator pipe was too long, causing a lot of energy or heat loss (heat loss) so that the compression speed was small. So that in the research, innovated and analyzed the pipe insulation of alpha-type stirling engine generators, alpha-type stirling engines, 180o phase angle. The research method used is to use the thermodynamic approach with Schmidt theory and the theory of the ideal cycle stirling engine. while the simulation is done using the Ideal Stirling Cycle Calculator. Results investigated shows that providing insulation on the generator pipes of an alpha-type stirling engine for an alpha-type stirling engine with a 180o phase angle is proven to reduce a lot of energy or heat loss (heat loss) due to too long generator pipes, with a heat loss value ratio of 226.66 W for the pipe. generator that uses insulation whose value is smaller than the value of the heat loss when the generator pipe without using isocation is 1,584.12 W.

scholarly journals Efficiency Reduction in Stirling Engines Resulting from Sinusoidal Motion

Energies ◽  
2018 ◽  
Vol 11 (11) ◽  
pp. 2887 ◽  
Author(s):  
Salvatore Ranieri ◽  
Gilberto Prado ◽  
Brendan MacDonald
Keyword(s):  
Thermal Efficiency ◽  
Thermal Power ◽  
Heat Sources ◽  
Sinusoidal Motion ◽  
Wide Range ◽  
Stirling Engines ◽  
Isothermal Analysis ◽  
The Impact ◽  
Alpha Type ◽  
The Ideal

Stirling engines have a high potential to produce renewable energy due to their ability to use a wide range of sustainable heat sources, such as concentrated solar thermal power and biomass, and also due to their high theoretical efficiencies. They have not yet achieved widespread use and commercial Stirling engines have had reduced efficiencies compared to their ideal values. In this work we show that a substantial amount of the reduction in efficiency is due to the operation of Stirling engines using sinusoidal motion and quantify this reduction. A discrete model was developed to perform an isothermal analysis of a 100cc alpha-type Stirling engine with a 90 ∘ phase angle offset, to demonstrate the impact of sinusoidal motion on the net work and thermal efficiency in comparison to the ideal cycle. For the specific engine analyzed, the maximum thermal efficiency of the sinusoidal cycle was found to have a limit of 34.4%, which is a reduction of 27.1% from Carnot efficiency. The net work of the sinusoidal cycle was found to be 65.9% of the net work from the ideal cycle. The model was adapted to analyze beta and gamma-type Stirling configurations, and the analysis revealed similar reductions due to sinusoidal motion.

Design of a Small Renewable Resource Model based on the Stirling Engine with Alpha and Beta Configurations

2017 ◽  
Vol 8 (2) ◽  
pp. 360
Author(s):  
Faisal Zahari ◽  
Muhammad Murtadha Othman ◽  
Ismail Musirin ◽  
Amirul Asyraf Mohd Kamaruzaman ◽  
Nur Ashida Salim ◽  
...  
Keyword(s):  
Temperature Variation ◽  
Waste Heat ◽  
Renewable Resource ◽  
Stirling Engine ◽  
Heat Energy ◽  
Maintenance Cost ◽  
Resource Model ◽  
Stirling Cycle ◽  
Cooling Agent ◽  
Stirling Engines

<p>This paper presents the conceptual design of Stirling engine based Alpha and Beta configurations. The performances of Stirling engine based Beta configuration will be expounded elaborately in the discussion. The Stirling engines are durable in its operation that requires less maintenance cost.  The methodology for both configurations consists of thermodynamic formulation of Stirling Cycle, Schmidt theory and few composition of flywheel and Ross-Yoke dimension. Customarily, the Stirling engine based Beta configuration will operate during the occurrence of low and high temperature differences emanating from any type of waste heat energy. A straightforward analysis on the performance of Stirling engine based Beta configuration has been performed corresponding to the temperature variation of cooling agent. The results have shown that the temperature variation of cooling agent has a direct effect on the performances of Stirling engine in terms of its speed, voltage and output power. </p>

Thermodynamic Analysis and Performance Investigation of an Alpha-Type Stirling Engine

2012 ◽  
Author(s):  
E. D. Rogdakis ◽  
I. P. Koronaki ◽  
G. D. Antonakos
Keyword(s):  
Thermodynamic Analysis ◽  
Power Output ◽  
System Performance ◽  
Engine Performance ◽  
Energy Systems ◽  
Stirling Engine ◽  
Operating Conditions ◽  
System Capacity ◽  
Stirling Engines ◽  
Alpha Type

The Stirling engine, as an external combustion engine, can be powered using a variety of heat sources including the continuous combustion process thus achieving significantly reduced emissions. Energy systems powered by a Stirling engines meet the needs of various applications not only in the domestic and industrial sections but in military and space gadgets as well. Stirling engines can also be used as cryocoolers in medical applications where they are called to achieve very low temperatures. Each energy system using Stirling Engine optimizes its performance in specific operating conditions. The system capacity depends on the geometric and structural characteristics, the design of the unit, the environment in which the engine is allowed to it works as well as the size of the load. In order to study the function and the efficiency of Stirling energy systems a CHP SOLO 161V -ALPHA TYPE STIRLING ENGINE was installed in the Laboratory of Applied Thermodynamics of NTUA. A thermodynamic analysis has been conducted using appropriate computing codes. The effect of each independent variable on the system performance was investigated. The study was divided into distinct levels of detail, bringing out each variable. Initially, the performance of the heat engine was examined assuming an ideal regenerator. Then, the effectiveness of the regenerator was evaluated as well as its effect on the engine performance, while the effect of the pressure drop and the energy dissipation on the engine efficiency was also investigated. Measurements were conducted using different operational conditions concerning the heating load of the engine. The effect of the geometrical characteristics of the regenerator on power output and engine performance was examined based on the results of a simulation analysis. Moreover, the power output and the efficiency of the machine in relation to the thermal load of the unit and the average pressure of the working medium were investigated. Major performance input characters affecting geometrical and operational parameters of the unit were identified leading to unit optimization with specific combinations leading to increased system performance. Simulation results were validated by comparison to corresponding values obtained by relative experiments conducted with the SOLO unit. Finally, a sensitivity analysis was performed in order to investigate the effect of the operating conditions on the performance of an alpha type Stirling Engine.

scholarly journals Thermodynamic Model for Performance Analysis of a Stirling Engine Prototype

Energies ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 2655 ◽  
Author(s):  
Miguel Torres García ◽  
Elisa Carvajal Trujillo ◽  
José Vélez Godiño ◽  
David Sánchez Martínez
Keyword(s):  
Heat Transfer ◽  
Decision Making ◽  
Stirling Engine ◽  
Decision Making Process ◽  
Actual Behavior ◽  
Isothermal Model ◽  
Working Cycle ◽  
Stirling Engines ◽  
Expected Values ◽  
The Ideal

In this study, the results of simulations generated from different thermodynamic models of Stirling engines are compared, including characterizations of both instantaneous and indicated operative parameters. The aim was to develop a tool to guide the decision-making process regarding the optimization of both the performance and reliability of Stirling engines, such as the 2.9 kW GENOA 03 unit—the focus of this work. The behavior of the engine is characterized using two different approaches: an ideal isothermal model, the simplest of those available, and analysis using the ideal adiabatic model, which is more complex than the first. Some of the results obtained with the referred ideal models deviated considerably from the expected values, particularly in terms of thermal efficiency, so a set of modifications to the ideal adiabatic model are proposed. These modifications, mainly related to both heat transfer and fluid friction phenomena, are intended to overcome the limitations due to the idealization of the engine working cycle, and are expected to generate results closer to the actual behavior of the Stirling engine, despite the increase in the complexity derived from the modelling and simulation processes.

Preliminary Design and Adiabatic Analysis of a 3kW Free Piston Stirling Engine

2013 ◽  
Vol 325-326 ◽  
pp. 277-282 ◽  
Author(s):  
Chen Duan ◽  
Shui Ming Shu ◽  
Guo Zhong Ding ◽  
Ji Wei Yan
Keyword(s):  
Thermodynamic Analysis ◽  
Stirling Engine ◽  
Preliminary Design ◽  
Free Piston ◽  
Stirling Engines ◽  
Chp System ◽  
Free Piston Stirling Engine ◽  
The Ideal

In recent years, as one kind of Stirling engines, free piston Stirling engines are attracting world attention. Free piston Stirling engines could be applied to the solar dish system, micro-CHP system and so on. The development of a free piston Stirling engine is discussed in this paper. The ideal adiabatic model is used in the preliminary design of the free piston Stirling engine. The key parameters of the designed engine and the thermodynamic analysis are described in detail. Then the performance of the engine is obtained.

scholarly journals Cyclic Control Optimization Algorithm for Stirling Engines

Symmetry ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 873
Author(s):  
Raphael Paul ◽  
Karl Heinz Hoffmann
Keyword(s):  
Optimal Control ◽  
Optimal Control Problem ◽  
Control Problem ◽  
Limit Cycles ◽  
Stirling Engine ◽  
Maximum Power ◽  
Maximum Efficiency ◽  
Engine Model ◽  
Stirling Engines ◽  
The Ideal

The ideal Stirling cycle describes a specific way to operate an equilibrium Stirling engine. This cycle consists of two isothermal and two isochoric strokes. For non-equilibrium Stirling engines, which may feature various irreversibilities and whose dynamics is characterized by a set of coupled ordinary differential equations, a control strategy that is based on the ideal cycle will not necessarily yield the best performance—for example, it will not generally lead to maximum power. In this paper, we present a method to optimize the engine’s piston paths for different objectives; in particular, power and efficiency. Here, the focus is on an indirect iterative gradient algorithm that we use to solve the cyclic optimal control problem. The cyclic optimal control problem leads to a Hamiltonian system that features a symmetry between its state and costate subproblems. The symmetry manifests itself in the existence of mutually related attractive and repulsive limit cycles. Our algorithm exploits these limit cycles to solve the state and costate problems with periodic boundary conditions. A description of the algorithm is provided and it is explained how the control can be embedded in the system dynamics. Moreover, the optimization results obtained for an exemplary Stirling engine model are discussed. For this Stirling engine model, a comparison of the optimized piston paths against harmonic piston paths shows significant gains in both power and efficiency. At the maximum power point, the relative power gain due to the power-optimal control is ca. 28%, whereas the relative efficiency gain due to the efficiency-optimal control at the maximum efficiency point is ca. 10%.

scholarly journals Experimental evaluation of piston motion modification to improve the thermodynamic power output of a low temperature gamma Stirling engine

2021 ◽  
Vol 313 ◽  
pp. 04002
Author(s):  
Michael Nicol-Seto ◽  
David Nobes
Keyword(s):  
Low Temperature ◽  
Power Output ◽  
Stirling Engine ◽  
Maximum Power ◽  
Piston Motion ◽  
Heat Engines ◽  
Stirling Engines ◽  
Thermodynamic Performance ◽  
Engine Power ◽  
The Ideal

Stirling engines are a variety of heat engines which are capable of using heat from various sources including low temperature renewables. This work examines performance of a lab scale low temperature gamma type Stirling engine with a drive train modified with oval elliptical gears. The gears were added to dwell the engine piston motion to attempt to improve the thermodynamic performance of the engine by better replicating the ideal Stirling cycle. A variety of dwelling piston configurations were tested on both the displacer and power piston. It was observed that that the piston dwelling had the anticipated effect of changing the engine indicator diagrams to more closely resemble the ideal cycle, however there were no substantial improvements to maximum engine power. It was observed that dwelling the displacer piston caused substantial reductions to engine running speeds and resulted in maximum power being reduced. In the case of power piston dwelling the indicator diagram was enlarged and there were slight increases to maximum power production. Overall the added complexity of dwelled piston motion systems is not likely an advantageous method of increasing the power output of low temperature difference Stirling engines.

scholarly journals Idealization of The Real Stirling Cycle

2016 ◽  
Vol 14 (3) ◽  
pp. 19-27 ◽  
Author(s):  
Libor Červenka
Keyword(s):  
Simulation Model ◽  
Simulation Software ◽  
Stirling Engine ◽  
The Real ◽  
Stirling Cycle ◽  
The Ideal

Abstract The paper presents a potential idealization of the real Stirling cycle. This idealization is performed by modifying the piston movement corresponding to the ideal Stirling cycle. The focus is on the cycle thermodynamics with respect to the indicated efficiency and indicated power. A detailed 1-D simulation model of a Stirling engine is used as a tool for this assessment. The model includes real non-zero volumes of heater, regenerator, cooler and connecting pipe. The model is created in the GT Power commercial simulation software.

scholarly journals Stirling-Engine in a Novel Alphagamma Configuration – a Key for Maintenance-free Operation

2021 ◽  
Vol 313 ◽  
pp. 08006
Author(s):  
Josef Frauscher ◽  
Franz Diermaier ◽  
Hans-Jürgen Brandt ◽  
Michael Gschwendtner
Keyword(s):  
Experimental Data ◽  
Friction And Wear ◽  
Stirling Engine ◽  
Work Output ◽  
Polytropic Model ◽  
Stirling Engines ◽  
Conducting Research ◽  
Development Step ◽  
Good Agreement ◽  
The Ideal

Since 2001, Frauscher Thermal Motors have been conducting research in the field of thermodynamic machines, in particular Stirling engines of various types. One important development step is the invention of a Stirling engine in an alphagamma® configuration. In this configuration, the expansion piston is designed as a differential piston with its ring surface connected to the cold volume. In this paper, the design advantages of the alphagamma® configuration in comparison with a traditional alpha configuration are shown analytically by using a polytropic model as a modification of the ideal adiabatic analysis. The findings were confirmed by also simulating the proposed alphagamma® configuration in a Sage model which was validated against experimental data with very good agreement. The results of both methods show that the counter-productive compression work can be reduced to almost zero – which makes the compression piston a displacer and explains the name alphagamma® – with the expansion work also reduced for the same net work output. As a consequence, the forces on the pistons, and thus, on the bearings can be significantly reduced, also leading to smaller piston side-loads, less friction and wear. The combination of all advantages allows the design of a mechanically sound and inexpensive machine.

Stirling Engine Technology for Parabolic Dish-Stirling System Based on Concentrating Solar Power (CSP)

2015 ◽  
Vol 785 ◽  
pp. 576-580 ◽  
Author(s):  
Liaw Geok Pheng ◽  
Rosnani Affandi ◽  
Mohd Ruddin Ab Ghani ◽  
Chin Kim Gan ◽  
Jano Zanariah
Keyword(s):  
High Efficiency ◽  
Combustion Engine ◽  
Renewable Energy Sources ◽  
Stirling Engine ◽  
Energy Sources ◽  
Heat Engines ◽  
Stirling Engines ◽  
Parabolic Dish ◽  
Mechanical Devices ◽  
And Control

Solar energy is one of the more attractive renewable energy sources that can be used as an input energy source for heat engines. In fact, any heat energy sources can be used with the Stirling engine. Stirling engines are mechanical devices working theoretically on the Stirling cycle, or its modifications, in which compressible fluids, such as air, hydrogen, helium, nitrogen or even vapors, are used as working fluids. When comparing with the internal combustion engine, the Stirling engine offers possibility for having high efficiency engine with less exhaust emissions. However, this paper analyzes the basic background of Stirling engine and reviews its existing literature pertaining to dynamic model and control system for parabolic dish-stirling (PD) system.

Sign in / Sign up

Export Citation Format

Share Document