scholarly journals Pertumbuhan dan Produksi Pucuk Kenikir pada Beberapa Komposisi Media Tanam dan Interval Pemanenan (The Growth and Shoot Production of Cosmos caudatus with Various Plant Media Composition and Harvesting Interval)

2021 ◽  
Vol 30 (2) ◽  
pp. 107
Author(s):  
Ismail Saleh ◽  
Ida Setya Wahyu Atmaja ◽  
Ray March Syahadat
Keyword(s):  
Experimental Design ◽  
Block Design ◽  
Wild Plant ◽  
Media Composition ◽  
Cosmos Caudatus ◽  
Randomized Block Design ◽  
Interval Effect ◽  
Shoot Production ◽  
The Media ◽  
Two Stages

<p>Kenikir dapat dimanfaatkan sebagai sayuran dengan cara mengonsumsi pucuknya. Kenikir banyak dijumpai sebagai tumbuhan liar sehingga diperlukan upaya untuk meningkatkan produksi pucuk kenikir. Produksi pucuk kenikir dapat dioptimalkan dengan melakukan perbaikan teknik budidaya, salah satunya pengaturan komposisi media tanam dan interval panen pucuk. Tujuan dari penelitian ini adalah untuk menganalisis pengaruh komposisi media tanam dan interval pemanenan terhadap pertumbuhan dan produksi pucuk kenikir. Penelitian dilaksanakan pada bulan Februari sampai dengan Mei 2019 di Kebun Percobaan Fakultas Pertanian UGJ, Cirebon. Percobaan dilakukan dalam dua tahap, yaitu pengaruh komposisi media tanam terhadap pertumbuhan dan produksi pucuk kenikir pada panen pertama serta pengaruh interaksi antara komposisi media tanam dan interval pemanenan terhadap produksi pucuk pada panen kedua. Rancangan percobaan pada percobaan pertama menggunakan Rancangan Acak Kelompok (RAK) satu faktor, yaitu komposisi media tanam dengan sembilan ulangan dan rancangan percobaan pada percobaan kedua menggunakan RAK faktorial dua faktor. Faktor pertama adalah komposisi media tanam dan faktor kedua adalah interval pemanenan dan diulang sebanyak tiga kali. Komposisi media tanam terdiri atas tanah, tanah : pukan (2:1), dan tanah : pukan (1:1). Interval pemanenan yang dicobakan terdiri atas tiga taraf, yaitu 10, 15, dan 20 hari. Hasil penelitian menunjukkan bahwa media tanam tanah : pukan (1:1) meningkatkan pertumbuhan dan produksi pucuk kenikir baik pada saat panen pertama maupun panen kedua. Interval pemanenan 20 hari menurunkan produksi pucuk total disebabkan interval pemanenan yang terlalu lama menyebabkan banyaknya pucuk kenikir yang berbunga sehingga menjadi tidak layak untuk dipanen.</p><p><strong>Keywords</strong></p><p>Interval pemanenan; Kenikir (Cosmos caudatus); Media tanam; Pertumbuhan; Produksi pucuk</p><p><strong>Abstract</strong></p><p>Cosmos caudatus can be used as vegetable by its shoots. Cosmos are found as wild plant so that efforts are needed to increase shoot production. Shoot production can be optimized by media composition and harvesting interval. This research objective was to investigate planting media composition and harvesting interval effect on growth and shoot production of cosmos. The research was carried out for three months at Cirebon. The experiment was carried out in two stages: (1) the effect of media composition on growth and shoot at the first harvest and (2) the effect of interaction between media composition and shoot harvesting interval at the second harvest. The experimental design for first experiment used Randomized Block Design (RBD), namely the composition of media of soil, 2:1 soil-manure and 1:1 soil-manure with nine replications. Meanwhile, we used two factor factorial RBD for second experiment. The first factor was the media composition and the second factor was three harvest interval with three replications. The result showed that planting media of soil and manure (1:1) increased the growth and shoot both in the first and second harvesting. The harvesting interval of 20 days decrease the total shoot because many branches to flower so they cannot be harvested.</p>

scholarly journals Technical and Economic Viability of Wheat with Forms of Application and Doses of Boron

2018 ◽  
Vol 10 (4) ◽  
pp. 306 ◽  
Author(s):  
Fernando S. Galindo ◽  
Marcelo C. M. Teixeira Filho ◽  
Salatiér Buzetti ◽  
Eduardo H. M. Boleta ◽  
Willian L. Rodrigues ◽  
...  
Keyword(s):  
Experimental Design ◽  
Block Design ◽  
Leaf Tissue ◽  
Economic Viability ◽  
No Tillage ◽  
Wheat Grain ◽  
Economic Return ◽  
Randomized Block Design ◽  
Tillage System ◽  
Irrigated Wheat

Boron is one of the most limiting micronutrients in grains production system in Brazil. In this way, the objective was to evaluate the effect of forms of application and doses of boron in irrigated wheat grain yield evaluating the economic terms in Cerrado region. The experiment was conducted in no-tillage system in an Oxisol with clay texture in Selvíria, MS, Brazil. The experimental design was a randomized block design with four replicates, arranged in a 4 × 3 factorial scheme: four doses of boron (0, 1, 2 and 4 kg ha-1) with boric acid source (B = 17%); and three apllication forms: a) in desiccation of the predecessor straw, together with herbicide; b) at the time of sowing, in soil along with the formulated fertilization seeding and c) via leaf tissue with the application of post emergent herbicide. The application of 2 kg ha-1 provides greater grain yields, but the highest economic return was obtained at the dose of 1 kg ha-1, with application in soil, ensuring profitability from production of irrigated wheat in the Cerrado.

scholarly journals Nutritional Requirement of Sugarcane Cultivars

2018 ◽  
Vol 10 (4) ◽  
pp. 361 ◽  
Author(s):  
Vinicius S. G. da Silva ◽  
Mauro W. de Oliveira ◽  
Vilma M. Ferreira ◽  
Terezinha B. A. Oliveira ◽  
Elaine R. Galvão ◽  
...  
Keyword(s):  
Experimental Design ◽  
Block Design ◽  
Nutritional Requirements ◽  
Nutritional Requirement ◽  
Sugarcane Varieties ◽  
The Past ◽  
Randomized Block Design ◽  
Productive Potential ◽  
New Varieties

Sugarcane produces a large amount of biomass, extracts and accumulates high amounts of nutrients. In the literature the nutritional requirements for most cultivated varieties in the past are found, however there is little information on the new varieties currently planted. The objective of this study was to evaluate the nutritional requirement of four sugarcane varieties, currently very planted, in the cycles of plant-cane, first and second ratoon. The study was installed in a Yellow Oxisol. The experimental design was a randomized block design, with five replications, and four treatments: RB867515, RB92579, SP813250 and VAT90212. During maturation of the cane, in the three evaluation cycles, the productivity of natural biomass and the nutritional requirement of macronutrients of the varieties were determined. It was evidenced that the cultivars of sugarcane are of high productive potential and resemble the accumulation of biomass, observing a yield of 158, 128 and 107 t ha-1 in the cycles of plant-cane, first and second ratoon. Regarding the nutritional requirement, the varieties did not differ among them and expressed the following order of need in the plant-cane K > N > Ca > Mg > S > P, in the first and second ratoon, the sequence observed was K > N > Ca > S > Mg > P.

scholarly journals Phenotypic stability and genetic gains in six-year girth growth of Hevea clones

1999 ◽  
Vol 34 (7) ◽  
pp. 1223-1232 ◽  
Author(s):  
Paulo de Souza Gonçalves ◽  
Alberto Kazutoshi Fujihara ◽  
Altino Aldo Ortolani ◽  
Ondino Cleante Bataglia ◽  
Nelson Bortoletto ◽  
...  
Keyword(s):  
Experimental Design ◽  
Regression Coefficient ◽  
Block Design ◽  
Rubber Tree ◽  
Phenotypic Stability ◽  
Plateau Region ◽  
Genetic Gains ◽  
Paulo State ◽  
Randomized Block Design ◽  
Clonal Variance

Rubber tree [Hevea brasiliensis (Willd. ex Adr. de Juss.) Müell. Arg.] budgrafts of seven clones were evaluated on five contrasting sites in the plateau region of the São Paulo State, Brazil. The objective of this work was to study the phenotypic stability for girth growth. The experimental design was a randomized block design with three replications and seven treatments. Analysis of variance of girth at six-year plant growth indicated a highly significant clone x site interaction. Only linear sites and clone x site components of clone x year interaction were significant, indicating that the performance of clones over sites for this trait could be predicted. The clones GT 1 and PB 235 showed the greatest stability in relation to girth growth, with foreseen responses to change, introduced in the sites. The clones PB 235 and IAN 873 showed significative difference in relation to regression coefficient, representing clones with specific adaptability on favorable and unfavorable sites respectively. The clone GT 1 became the most promissory one in the study of stability and adaptability even showing low girth growth. Expected genetic gains from planting sites, along with estimates of clonal variance and repeatability of clonal means are generally greatest or close to the greatest when selection is done at the same site.

scholarly journals Optimation of In vitro Lateral Shoots Multiplication of Papaya (Carica papaya L.) “Callina” with BAP and NAA

2017 ◽  
Vol 4 (3) ◽  
pp. 102-107
Author(s):  
Darda Efendi ◽  
Mirza R Putra
Keyword(s):  
Carica Papaya ◽  
Clonal Propagation ◽  
Block Design ◽  
Shoot Multiplication ◽  
Plant Materials ◽  
Randomized Block Design ◽  
Lateral Shoots ◽  
Shoot Production ◽  
Set Up

Papaya is a popular fruit and is grown commercially in many subtropical and tropical countries. Papayas are generally grown from seeds; therefore the offsprings are not true-to-type and could come in three sexes, female, male, and hermaphrodite. Clonal propagation is required to obtain to grow true-to-type hermaphrodite papayas. In this research, we developed an in vitro protocol for shoot multiplication from lateral shoots from in vitro germinated papaya seedlings. The in vitro propagated plant materials could potentially be used as a source of papaya micro cuttings, or as scion for papaya grafting. The experiment was set up as a factorial experiment with NAA at 0, 0.1 and 0.5 mg.L-1, and BAP at 0, 0.1, 0.5, and 1.0 mg.L-1 in a completely randomized block design. BAP interacted with NAA in affecting the shoot production per explant. The optimum BAP and NAA concentration to produce lateral shoots was 0.54 mg. L-1 and 0.1 mg.L-1, respectively. Media without NAA reduced the number of lateral shoots and number of leaf per explant at any BAP concentration.Keywords: hermaphrodite, seeds, true to type, clonal propagation, micro cuttings.

scholarly journals Seleção de genótipos de batata-doce quanto à eficiência ao uso do fósforo em solos da região de cerrado

2013 ◽  
Vol 4 (4) ◽  
pp. 356-364
Author(s):  
Luziano Lopes Da Silva ◽  
Márcio Antônio Da Silveira ◽  
Rodrigo Ribeiro Fidelis ◽  
Rodrigo de Castro Tavares ◽  
Valéria Gomes Momenté ◽  
...  
Keyword(s):  
Experimental Design ◽  
Sweet Potato ◽  
Ipomoea Batatas ◽  
Block Design ◽  
Tuberous Root ◽  
Phosphorus Fertilization ◽  
Germplasm Bank ◽  
Randomized Block Design ◽  
The Family ◽  
Selection Of

The sweet potato (Ipomoea batatas (l.) Lam.) Lam) is a plant that produces tuberous root belonging to the family convolvulácea explored in practically all states of Brazil. The objective of this work was to select genotypes of the sweet potato as the efficiency of phosphorus use in cerrado soils with high and low availability of this nutrient. Were evaluated nine genotypes of sweet potato coming from the germplasm bank from the Federal University of the Tocantins, Brazil. The experimental design was in randomized block design with three replications being nine genotypes grown in two environments with low and high phosphorus availability, using doses of phosphorus fertilization from 20 and 120 kg ha-1 P2O5, applied at planting. To select genotypes suitable for environments proposed was used methodology for selection of the efficient use and response to phosphorus fertilization (efficiency and response). Genotype Amanda was classified as efficient and responsive, Barbara, Julia, Marcela and Carolina Vitoria as efficient, but not responsive and Livia, Duda, Ana Clara and Beatriz were classified as non-efficient, responsive but the absorption and utilization of phosphorus.

scholarly journals Keragaan Varietas Kubis (Brassica oleracea L) Dataran Rendah dengan Aplikasi Mulsa di Maluku

2020 ◽  
Vol 16 (1) ◽  
pp. 42-50
Author(s):  
Marietje Pesireron ◽  
Sheny S Kaihatu ◽  
Rein E Senewe
Keyword(s):  
Experimental Design ◽  
Block Design ◽  
Fruit Weight ◽  
Sticky Trap ◽  
Plastic Mulch ◽  
Yield Performance ◽  
Randomized Block Design ◽  
Study Results ◽  
Number Percentage ◽  
Brassica Oleracea L

The low yield of cabbage in Maluku is thought to due to the lack of attention of farmers to grow to crop because so far farmers think it can only grow well and forms crops in the highlands, so no one wants to grow cabbage. This study aimed to determine the yield performance of five cabbage varieties with the use of several types of mulches and was carried out in Gemba Village, Kairatu Subdistrict, Western Seram Regency. The experimental design used was the factorial Randomized Block Design with three replications and the farmers as replications. The first factor was five varieties of cabbage (Sehati-F1, Daehnfeldt, Green Hero, Green Coronet, KK-Koss), the second factor was the type of mulch, consisting of four types, namely: without mulch (M0), black silver plastic mulch, straw mulch, and husk mulch. The data obtained were analyzed with analysis of variance and DMRT test at the level of 5% if necessary. Parameters observed included plant height at 45 days after planting, leaf number, percentage of crop formation, percentage of pest and disease attacks, crop circumference per plant at harvest, fruit weight, and yield.  The study results showed that the five varieties tested with the use of various types of mulch had the potentials to be developed in Maluku. Varieties with the highest yields and very good adaptation to lowland environments in Maluku included Sehati-F1 and KK-Cross. Pest control by using plant-based pesticides in a combination with scheduled mechanical control (yellow plates, pitfalls, and stick traps) could reduce the levels of pest and disease attacks and the crops appeared healthy for consumption. Keywords: cabbage, lowland, mulch   ABSTRAK Rendahnya produksi kubis di Maluku diduga akibat kurangnya perhatian petani untuk bertanam kubis, yang dikarenakan selama ini petani mengira kubis hanya dapat tumbuh baik dan membentuk krop di dataran tinggi, sehingga sedikit petani yang mau berusahatani kubis. Kajian ini bertujuan mengetahui keragaan hasil lima varietas kubis dengan penggunaan berbagai jenis mulsa di desa Gemba, Kecamatan Kairatu, Kabupaten Seram Bagian Barat. Rancangan percobaan yang digunakan adalah rancangan acak kelompok faktorial dengan tiga ulangan dan petani sebagai ulangan. Faktor pertama adalah lima varietas kubis (Sehati-F1, Daehnfeldt, Green hero, Green Coronet, KK-Cross); faktor kedua adalah jenis mulsa yang terdiri dari empat macam, yaitu: tanpa mulsa (M0), mulsa plastic hitam perak, mulsa jerami dan mulsa sekam. Data yang diperoleh dianalisis menggunakan analisis ragam dan uji lanjut DMRT pada taraf 5% sesuai kebutuhan. Peubah-peubah yang diamati meliputi tinggi tanaman umur 45 hari setelah tanam (hst), jumlah daun, persentase pembentukan krop, persentase serangan hama dan penyakit, lingkar buah per tanaman saat panen, bobot buah dan hasil panen. Hasil penelitian menunjukkan bahwa kelima varietas yang di uji dengan penggunaan berbagai jenis mulsa sangat berpotensi untuk dibudidayakan di Maluku berdasarkan kemampuannya membentuk krop. Varietas dengan produksi tertinggi dan beradaptasi sangat baik terhadap lingkungan dataran rendah di lokasi penelitian adalah Sehati-F1 dan KK-Cross. Penggendalian hama dengan menggunakan pestisida nabati yang dikombinasikan dengan pengendalian secara mekanis (tampan kuning, pitfoll dan sticky trap) secara terjadwal dapat menurunkan tingkat serangan hama dan penyakit, dan menghasilkan tanaman-tanaman yang sehat. Kata Kunci: dataran rendah, kubis, mulsa, varietas

scholarly journals ANALISIS PERCOBAAN FAKTORIAL UNTUK MELIHAT PENGARUH PENGGUNAAN ALAT PERAGA BLOK ALJABAR TERHADAP PRESTASI BELAJAR ALJABAR SISWA

2013 ◽  
Vol 2 (2) ◽  
pp. 1
Author(s):  
NI PUTU AYU MIRAH MARIATI ◽  
NI LUH PUTU SUCIPTAWATI ◽  
KARTIKA SARI
Keyword(s):  
Academic Achievement ◽  
Experimental Design ◽  
Block Design ◽  
Student Academic Achievement ◽  
Visual Aids ◽  
Geometry Model ◽  
Randomized Block Design ◽  
Algebraic Forms ◽  
Block Algebra ◽  
Better Than

The experimental design was applied in research in many different fields of science, such as in education, as used in this study. Block algebra visual aids is a visual aids in the form of the geometry model used to concretize understanding the variables and constants in the algebra which is an abstract concept. This visual aids are used as a basis for factoring algebraic forms. In connection with this, the aims of this research is to determine the effect of the application of algebra block in student academic achievement in class VII in the field of algebra in schools categorized as private, SSN (Sekolah Standar Nasional) and the previously categorized RSBI (Rintisan Sekolah Bertaraf Internasional). The method of analysis used in this study was two-factor experimental design in a randomized block design. The results showed that the academic achievement of students in the field of algebra after learning with block algebra visual aids obtained better than the academic achievement of students who received learning without using block algebra visual aids. Moreover, it also shows that the categories of schools have a significant effect on student achievement.

scholarly journals Germination and morphophysiology of passion fruit seedlings under salt water irrigation1

2018 ◽  
Vol 48 (3) ◽  
pp. 229-236 ◽  
Author(s):  
Jailma Ribeiro de Andrade ◽  
Aldair de Sousa Medeiros ◽  
Sebastião de Oliveira Maia Júnior ◽  
Leila de Paula Rezende ◽  
João Correia de Araújo Neto
Keyword(s):  
Salt Water ◽  
Block Design ◽  
Photosynthetic Apparatus ◽  
Passion Fruit ◽  
Growth And Yield ◽  
Leaf Biomass ◽  
Agricultural Crops ◽  
Randomized Block Design ◽  
Four Levels ◽  
Two Stages

ABSTRACT The use of salt water in irrigation can reduce the growth and yield of agricultural crops. This study aimed to assess the germination, emergence, physiology and growth of passion fruit seedlings of two varieties under salt water irrigation. The study was conducted in two stages: the first carried out in a laboratory and the second in a greenhouse, using a randomized block design, in a 2 x 4 factorial scheme, corresponding to two passion fruit varieties (BRS RC and BRS GA1) and four levels of irrigation water electrical conductivity (0.2 dS m-1, 2.2 dS m-1, 4.2 dS m-1 and 6.2 dS m-1), with four replications. The BRS GA1 variety exhibited the highest germination index and rate, in the germination stage, despite being more sensitive to salinity than the BRS RC. There was no damage to the photosynthetic apparatus in the BRS GA1 seedlings during growth, as demonstrated by the higher leaf biomass, when compared to the BRS RC variety.

scholarly journals Response of Wheat Plants to Combinations of Herbicides with Insecticides and Fungicides

2019 ◽  
Vol 37 ◽  
Author(s):  
M. VIECELLI ◽  
F.B. PAGNONCELLI JR. ◽  
M.M. TREZZI ◽  
B.M. CAVALHEIRO ◽  
R.C.R. GOBETTI
Keyword(s):  
Experimental Design ◽  
Grain Yield ◽  
Yield Components ◽  
Dry Matter ◽  
Block Design ◽  
Wheat Grains ◽  
Synergistic Interactions ◽  
Randomized Block Design ◽  
Relative Tolerance ◽  
Chemical Groups

ABSTRACT: The combination of herbicides and other pesticides can influence weed and crop management. This study aimed to evaluate the response of the combination of different herbicides with insecticides or fungicides of different chemical groups on the development and yield of wheat grains of the cultivar ORS Vintecinco. The experimental design was a randomized block design with three replications. The experiment consisted of 33 treatments, as follows: control without application and application of the herbicides 2,4-D (1,005 g a.e. ha-1), bentazon (756 g a.i. ha-1), metsulfuron-methyl (3 g a.i. ha-1), and pyroxsulam (16 g a.i. ha-1), isolated or combined with the insecticides chlorfluazuron (15 g a.i. ha-1), chlorpyrifos (720 g a.i. ha-1), deltamethrin (5 g a.i. ha-1), and methomyl (5 g a.i. ha-1) or with the fungicides azoxystrobin (100 g a.i. ha-1), carbendazim (250 g a.i. ha-1), and propiconazole (190 g a.i. ha-1). Relative tolerance (RT), shoot dry matter (SDM), yield components, and grain yield were evaluated. In general, pyroxsulam had the highest number of synergistic interactions with insecticides and fungicides, reducing RT and SDM, especially the combination pyroxsulam + chlorpyrifos due to a lower RT level (45%) and higher SDM reduction (52%). All combinations of herbicides with the insecticide chlorpyrifos and most of the combinations with the fungicide propiconazole led to a reduction of grain yield when compared to their isolated application or to control without application.

scholarly journals PENGARUH PENAMBAHAN LUMPUR AKTIF PADA BIOFILTER ANOKSIK-OKSIK DALAM MENURUNKAN KADAR AMONIA AIR LIMBAH RUMAH SAKIT

2019 ◽  
Vol 13 (1) ◽  
pp. 49
Author(s):  
Wayan Trisna Dewi ◽  
I Wayan Budiarsa Suyasa ◽  
I Nyoman Rai
Keyword(s):  
Activated Sludge ◽  
Block Design ◽  
Quality Standard ◽  
Suspended Solid ◽  
Hospital Wastewater ◽  
Randomized Block Design ◽  
Increasing Demand ◽  
Two Stages ◽  
Demand For Health ◽  
And Control

Development of the population and the increasing demand for health services has led to the increase in the number of hospitals, both government hospital and privet hospitals. The presence of ammonia as a result of protein decomposition can be toxic in the waters. The application of anoxic-oxic biofilter system is an attempt to be able to reduce ammonia levels in hospital wastewater. In the process of anoxic-oxic biofilter, contact occurs between the gravel media and microorganism to form biofilms which can accelerate the degradation of organic matter and the nitrification process. This study aims to obtain the best activated sludge source in reducing ammonia levels of wastewater applied to the anoxic-oxic biofilter system applied. This research was contucted in two stages in which the first stage of active mud nursery was carried out from three sources, namely WWTP Wangaya Hospital Denpasar, WWTP of PTN Hospital Udayana University and WWTP of Bangli Hospital for six days. At this stage a Mixed Liquor Volatile Suspended Solid (MLVSS) value is measured which shows the growth rate of biomass in activated sludge. The second stage is applivation of avtivated sludge and control to the anoxic-oxic biofilter system to reduce ammonia levels in hospital wastewater for five days of processing. This study use a randomized block design with four treatments and three replication. The results showed that the best activated sludge was obtained through nursery from WWTP of Wangaya Denpasar Hospital which was shown by the highest biomass growth (MLVSS Value) of 2433.3 mg/L and the highest reduction in ammonia reached a final level of 0.53 mg/L. The levels of effectiveness of the process of decreasing ammonia levels by 94.70% and has been able to pass the specified quality standard effectiveness percentage (90%) for five days of processing. The value of this effectiveness is the highest compared to the controls and other activated sludge treatment.

Sign in / Sign up

Export Citation Format

Share Document