Life cycle assessment of three water supply systems: importation, reclamation and desalination

2009 ◽  
Vol 9 (4) ◽  
pp. 439-448 ◽  
Author(s):  
E. Lyons ◽  
P. Zhang ◽  
T. Benn ◽  
F. Sharif ◽  
K. Li ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Water Supply ◽  
Energy Use ◽  
Water System ◽  
Water Supply Systems ◽  
Seawater Desalination ◽  
Future Demands ◽  
The Impact ◽  
Supply Systems

The issues of water supply and management will become more and more critical as the global population increases. In order to meet future demands, water supply systems must be developed to maximize the use of locally available water. It is also important to minimize the impact of water system developments on the environment. In this study, the overall environmental impacts were compared for water importation, reclamation and seawater desalination to address the water scarcity in areas where local supplies are not sufficient. The city of Scottsdale, Arizona was chosen for this study. Life Cycle Assessment (LCA) was performed and it suggests that seawater desalination has the highest impact whereas reclamation shows a relatively lower impact. However, Importation and reclamation systems have comparable results for several damage categories. The impacts of facility operations are significantly higher than the construction phase even when the life-span of infrastructure reduces from 50 year to 10 year. Due to the high impacts associated with the energy use during plant operations, different energy mixes were analyzed for their capabilities to lower the environmental burden.

scholarly journals A scalable and spatiotemporally resolved agricultural life cycle assessment of California almonds

2021 ◽  
Author(s):  
Elias Marvinney ◽  
Alissa Kendall
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Water Supply ◽  
Energy Use ◽  
Energy Intensity ◽  
Central Valley ◽  
San Joaquin Valley ◽  
Impact Categories ◽  
Freshwater Use ◽  
California's Central Valley

Abstract Purpose California’s Central Valley produces more than 75% of global commercial almond supply, making the life cycle performance of almond production in California of global interest. This article describes the life cycle assessment of California almond production using a Scalable, Process-based, Agronomically Responsive Cropping System Life Cycle Assessment (SPARCS-LCA) model that includes crop responses to orchard management and modeling of California’s water supply and biomass energy infrastructure. Methods A spatially and temporally resolved LCA model was developed to reflect the regional climate, resource, and agronomic conditions across California’s Central Valley by hydrologic subregion (San Joaquin Valley, Sacramento Valley, and Tulare Lake regions). The model couples a LCA framework with region-specific data, including water supply infrastructure and economics, crop productivity response models, and dynamic co-product markets, to characterize the environmental performance of California almonds. Previous LCAs of California almond found that irrigation and management of co-products were most influential in determining life cycle CO2eq emissions and energy intensity of California almond production, and both have experienced extensive changes since previous studies due to drought and changing regulatory conditions, making them a focus of sensitivity and scenario analysis. Results and discussion Results using economic allocation show that 1 kg of hulled, brown-skin almond kernel at post-harvest facility gate causes 1.92 kg CO2eq (GWP100), 50.9 MJ energy use, and 4820 L freshwater use, with regional ranges of 2.0–2.69 kg CO2eq, 42.7–59.4 MJ, and 4540–5150 L, respectively. With a substitution approach for co-product allocation, 1 kg almond kernel results in 1.23 kg CO2eq, 18.05 MJ energy use, and 4804 L freshwater use, with regional ranges of 0.51–1.95 kg CO2eq, 3.68–36.5 MJ, and 4521–5140 L, respectively. Almond freshwater use is comparable with other nut crops in California and globally. Results showed significant variability across subregions. While the San Joaquin Valley performed best in most impact categories, the Tulare Lake region produced the lowest eutrophication impacts. Conclusion While CO2eq and energy intensity of almond production increased over previous estimates, so too did credits to the system for displacement of dairy feed. These changes result from a more comprehensive model scope and improved assumptions, as well as drought-related increases in groundwater depth and associated energy demand, and decreased utilization of biomass residues for energy recovery due to closure of bioenergy plants in California. The variation among different impact categories between subregions and over time highlight the need for spatially and temporally resolved agricultural LCA.

scholarly journals Energy implications of the millennium drought on urban water cycles in Southeast Australian cities

2017 ◽  
Vol 18 (1) ◽  
pp. 214-221
Author(s):  
K. L. Lam ◽  
P. A. Lant ◽  
S. J. Kenway
Keyword(s):  
Water Supply ◽  
Water Conservation ◽  
Energy Use ◽  
Water Supply Systems ◽  
Urban Water ◽  
Demand Side ◽  
Related Energy ◽  
Millennium Drought ◽  
Wide Range ◽  
Supply Systems

Abstract During the Millennium Drought in Australia, a wide range of supply-side and demand-side water management strategies were adopted in major southeast Australian cities. This study undertakes a time-series quantification (2001–2014) and comparative analysis of the energy use of the urban water supply systems and sewage systems in Melbourne and Sydney before, during and after the drought, and evaluates the energy implications of the drought and the implemented strategies. In addition, the energy implications of residential water use in Melbourne are estimated. The research highlights that large-scale adoption of water conservation strategies can have different impacts on energy use in different parts of the urban water cycle. In Melbourne, the per capita water-related energy use reduction in households related to showering and clothes-washing alone (46% reduction, 580 kWhth/p/yr) was far more substantial than that in the water supply system (32% reduction, 18 kWhth/p/yr). This historical case also demonstrates the importance of balancing supply- and demand-side strategies in managing long-term water security and related energy use. The significant energy saving in water supply systems and households from water conservation can offset the additional energy use from operating energy-intensive supply options such as inter-basin water transfers and seawater desalination during dry years.

scholarly journals Managing Water Quality in Intermittent Supply Systems: The Case of Mukono Town, Uganda

Water ◽  
2020 ◽  
Vol 12 (3) ◽  
pp. 806
Author(s):  
Takuya Sakomoto ◽  
Mahmood Lutaaya ◽  
Edo Abraham
Keyword(s):  
Water Quality ◽  
Water Supply ◽  
Health Hazard ◽  
Water Quality Monitoring ◽  
Economic Feasibility ◽  
Water Supply Systems ◽  
Chemical Contamination ◽  
Intermittent Water Supply ◽  
The Impact ◽  
Supply Systems

Intermittent water supply networks risk microbial and chemical contamination through multiple mechanisms. In particular, in the cities of developing countries, where intrusion through leaky pipes are more prevalent and the sanitation systems coverage is low, contaminated water can be a public health hazard. Although countries using intermittent water supply systems aim to change to continuous water supply systems—for example, Kampala city is targeting to change to continuous water supply by 2025 through an expansion and rehabilitation of the pipe infrastructure—it is unlikely that this transition will happen soon because of rapid urbanisation and economic feasibility challenges. Therefore, water utilities need to find ways to supply safe drinking water using existing systems until gradually changing to a continuous supply system. This study describes solutions for improving water quality in Mukono town in Uganda through a combination of water quality monitoring (e.g., identifying potential intrusion hotspots into the pipeline using field measurements) and interventions (e.g., booster chlorination). In addition to measuring and analyses of multiple chemical and microbial water quality parameters, we used EPANET 2.0 to simulate the water quality dynamics in the transport pipeline to assess the impact of interventions.

scholarly journals Multi-objective optimization of energy and greenhouse gas emissions in water pumping and treatment

2020 ◽  
Vol 82 (12) ◽  
pp. 2745-2760
Author(s):  
Iliana Cardenes ◽  
Afreen Siddiqi ◽  
Mohammad Mortazavi Naeini ◽  
Jim W. Hall
Keyword(s):  
Energy Consumption ◽  
Water Supply ◽  
Greenhouse Gas Emissions ◽  
Greenhouse Gas ◽  
Energy Use ◽  
Water Supply Systems ◽  
Urban Water Supply ◽  
Multi Objective Optimization ◽  
Gas Emissions ◽  
Supply Systems

Abstract A large part of operating costs in urban water supply networks is usually due to energy use, mostly in the form of electricity consumption. There is growing pressure to reduce energy use to help save operational costs and reduce carbon emissions. However, in practice, reducing these costs has proved to be challenging because of the complexity of the systems. Indeed, many water utilities have concluded that they cannot practically achieve further energy savings in the operation of their water supply systems. This study shows how a hybrid linear and multi-objective optimization approach can be used to identify key energy consumption elements in a water supply system, and then evaluate the amount of investment needed to achieve significant operational gains at those points in the supply network. In application to the water supply system for the city of London, the method has shown that up to 18% savings in daily energy consumption are achievable. The optimal results are sensitive to discount rate and the financial value placed on greenhouse gas emissions. Valuation of greenhouse gas emissions is necessary to incentivise high levels of energy efficiency. The methodology can be used to inform planning and investment decisions, with specific focus on reducing energy consumption, for existing urban water supply systems.

scholarly journals Mobile crowd participation to root small-scale piped water supply systems in India and Bangladesh

2019 ◽  
Vol 9 (1) ◽  
pp. 139-151 ◽  
Author(s):  
A. Mink ◽  
B. A. Hoque ◽  
S. Khanam ◽  
D. Van Halem
Keyword(s):  
Water Supply ◽  
Water System ◽  
Internet Access ◽  
Water Quality Monitoring ◽  
Small Scale ◽  
Water Supply Systems ◽  
Smartphone Applications ◽  
Piped Water ◽  
Supply Systems ◽  
Mobile Crowd

Abstract In the arsenic-contaminated Ganges-Brahmaputra-Meghna Delta in India and Bangladesh, small-scale piped water supply seems a promising way to provide safe drinking water to households in the region. The use of smartphone applications can support monitoring of the system and enhance local engagement and empowerment. In this paper the scope for mobile crowd participation as a research and monitoring tool for piped water supply systems in Bihar, India and in Khulna and Chittagong, Bangladesh is investigated. In these areas, the use of smartphones and internet access are growing rapidly and smartphone applications would enable real-time water quality monitoring, payment of water bills, awareness creation, and a dialogue between the end-user and the water supplier. To identify the relevance and acceptability of piped water supply and smartphone monitoring, four surveys with potential end-users were conducted. Based on these surveys we conclude that in the investigated areas there is a desire for piped water systems, that households already own smartphones with internet access, and that there is an interest in smartphone monitoring. The enabling environment to deploy mobile crowd participation for piped water system monitoring stimulates further research towards an investigation of potential functionalities and the actual development of such an application.

scholarly journals Life Cycle Assessment on Different Synthetic Routes of ZIF-8 Nanomaterials

Energies ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4998
Author(s):  
Vasileios Ntouros ◽  
Ioannis Kousis ◽  
Dimitra Papadaki ◽  
Anna Laura Pisello ◽  
Margarita Niki Assimakopoulos
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Environmental Sustainability ◽  
Energy Use ◽  
Renewable Energy Sources ◽  
Electricity Consumption ◽  
Research Activity ◽  
Synthetic Routes ◽  
The Impact

In the last twenty years, research activity around the environmental applications of metal–organic frameworks has bloomed due to their CO2 capture ability, tunable properties, porosity, and well-defined crystalline structure. Thus, hundreds of MOFs have been developed. However, the impact of their production on the environment has not been investigated as thoroughly as their potential applications. In this work, the environmental performance of various synthetic routes of MOF nanoparticles, in particular ZIF-8, is assessed through a life cycle assessment. For this purpose, five representative synthesis routes were considered, and synthesis data were obtained based on available literature. The synthesis included different solvents (de-ionized water, methanol, dimethylformamide) as well as different synthetic steps (i.e., hours of drying, stirring, precursor). The findings revealed that the main environmental weak points identified during production were: (a) the use of dimethylformamide (DMF) and methanol (MeOH) as substances impacting environmental sustainability, which accounted for more than 85% of the overall environmental impacts in those synthetic routes where they were utilized as solvents and as cleaning agents at the same time; (b) the electricity consumption, especially due to the Greek energy mix which is fossil-fuel dependent, and accounted for up to 13% of the overall environmental impacts in some synthetic routes. Nonetheless, for the optimization of the impacts provided by the energy use, suggestions are made based on the use of alternative, cleaner renewable energy sources, which (for the case of wind energy) will decrease the impacts by up to 2%.

Sign in / Sign up

Export Citation Format

Share Document