scholarly journals Visible-light-driven photocatalytic degradation of rhodamine B in water by BiOClxI1−x solid solutions

2020 ◽  
Vol 81 (5) ◽  
pp. 1080-1089
Author(s):  
Huan-Yan Xu ◽  
Dan Lu ◽  
Qu Tan ◽  
Xiu-Lan He ◽  
Shu-Yan Qi
Keyword(s):  
Electron Microscopy ◽  
Solid Solutions ◽  
Rhodamine B ◽  
Diffuse Reflectance Spectroscopy ◽  
Bet Surface Area ◽  
Order Kinetic ◽  
X Ray Diffraction ◽  
Sunlight Irradiation ◽  
Transmission Electron ◽  
Visible Light Driven

Abstract Bismuth oxyhalides (BiOXs, X = Cl, Br and I) are emerging photocatalytic materials with unique layered structure, flexible band structure and superior photocatalytic activity. The purpose of this study was to develop a facile alcoholysis route to prepare BiOClxI1−x nanosheet solid solutions at room temperature. X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), UV-vis diffuse reflectance spectroscopy (UV-vis DRS), photoluminescence emission spectroscopy (PL) and Brunauer–Emmett–Teller (BET) surface area analyzer were used to characterize the as-prepared photocatalysts. These results revealed that two-dimension BiOClxI1−x nanosheet solid solutions could be obtained with high percentage of {001} crystal facets exposed. Moreover, the formation of solid solution could regularly change the optical absorption thresholds and band gaps of BiOClxI1−x photocatalysts. The photocatalytic experiments indicated that BiOCl0.75I0.25 exhibited the highest photocatalytic performance for the degradation of Rhodamine B (RhB) under simulated sunlight irradiation and the photocatalytic process followed a pseudo-first-order kinetic equation. A possible mechanism of RhB photodegradation over BiOClxI1−x solid solutions was proposed based on the structural properties of BiOClxI1−x solid solutions and RhB photosensitization.

scholarly journals Cypermethrin elimination using Fe-TiO2 nanoparticles supported on coconut palm spathe in a solar flat plate photoreactor

2020 ◽  
Vol 29 ◽  
pp. 2633366X2090616
Author(s):  
Ricardo Andrés Solano Pizarro ◽  
Adriana Patricia Herrera Barros
Keyword(s):  
Electron Microscopy ◽  
Flat Plate ◽  
Diffuse Reflectance Spectroscopy ◽  
Cocos Nucifera ◽  
Operating Costs ◽  
Bet Surface Area ◽  
Gas Chromatography Mass Spectrometry ◽  
X Ray Diffraction ◽  
Molar Ratios ◽  
Transmission Electron

In this research, the photocatalytic degradation of cypermethrin using iron-titanium dioxide (Fe-TiO2) nanoparticles supported in a biomaterial was evaluated. The nanoparticles of TiO2 were synthesized by the green chemistry method assisted by ultrasound and doped by chemical impregnation using Fe+3:Ti molar ratios of 0, 0.05, 0.075 and 0.1 to make efficient use of direct sunlight ( λ > 310 nm). All nanoparticles were immobilized on the surface of coconut spathe ( Cocos nucifera). The degradation was carried out at room temperature and natural pH in a flat plate solar reactor, on which the composite material was subjected. The concentration of cypermethrin was determined after 12,000 J m−2 of accumulated radiation from gas chromatography–mass spectrometry and the resulting material was characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, Fourier-transform infrared spectroscopy, ultraviolet–visible diffuse reflectance spectroscopy, and Brunauer-Emmett-Teller (BET) surface area. The best results were achieved with the use of Evonik TiO2 P-25, Fe:Ti = 0 and Fe:Ti = 0.05 in suspension, with percentages of degradation of cypermethrin of 99.84%, 99.62%, and 100%, respectively. However, the materials supported on the biomaterial of coconut allowed to reach degradation percentages higher than 80%, with the advantage that it minimizes operating costs, as they are not necessarily filtering or centrifuging processes to separate the catalyst.

Study on Photocatalytic Performance of F-Doped Nanometer TiO2

2011 ◽  
Vol 299-300 ◽  
pp. 171-174 ◽  
Author(s):  
Shao Feng Yan ◽  
Tong Sun
Keyword(s):  
Electron Microscopy ◽  
Rhodamine B ◽  
Diffuse Reflectance ◽  
Photocatalytic Performance ◽  
Diffuse Reflectance Spectroscopy ◽  
Synthesis Method ◽  
Order Kinetic ◽  
Transmission Electron ◽  
Ft Ir ◽  
Photocatalytic Performances

F-doped TiO2 by hydrothermal synthesis method is prepared in this paper. By basis of sunlight and porous nickels as the carriers, the samples were characterized by Transmission electron microscopy (TEM), scanning electron microscopy (SEM), infra-red (FT-IR) and diffuse reflectance spectroscopy (UV-vis). The photocatalytic performances of the samples were estimated by degrading Rhodamine B. which indicates that the reaction of photocatalytic degradation of Rhodamine B follows the zero order kinetic law. The photocatalytic performances are increased by F-doped. And F optimum doping dosage is 2.0%. After calcination at 500°C, the photocatalytic performance of the sample has not been obvious improved.

scholarly journals Synthesis of porous LaFeO3 prepared by nanocasting method for photo-Fenton degradation of oily-containing wastewater

2021 ◽  
Vol 11 (1) ◽  
pp. xx-xx
Author(s):  
Nga Phan To ◽  
Lien Nguyen Hong ◽  
Tuyen Le Van ◽  
Nhan Phan Chi ◽  
Huyen Phan Thanh
Keyword(s):  
Electron Microscopy ◽  
Catalytic Activity ◽  
Visible Light ◽  
Diffuse Reflectance Spectroscopy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Catalytic Activities ◽  
Transmission Electron ◽  
Visible Light Driven ◽  
Adsorption Desorption

Porous LaFeO3 were synthesised by nanocasting method using mesoporous silica (SBA-15) as a hard template and used as a visible-light-driven photocatalyst. The as-synthesised LaFeO3 photocatalyst were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray Diffraction (XRD), N2 adsorption-desorption, and Ultraviolet–Visible Diffuse Reflectance Spectroscopy (UV-vis DRS). The photo-Fenton catalytic activities of porous LaFeO3 were investigated for the degradation of oily-containing wastewater. The results showed that porous LaFeO3 had better photo-Fenton catalytic activity under visilbe light irradiation than pure LaFeO3. The remarkable improvement photo-Fenton catalytic activity of porous LaFeO3 material could be attributed to the synergistic effect of adsorption and visible light photo-Fenton processes thanks to its porous structure.

scholarly journals Synthesis of Ce1−xPdxO2−δ Solid Solution in Molten Nitrate

Catalysts ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 640
Author(s):  
Hideaki Sasaki ◽  
Keisuke Sakamoto ◽  
Masami Mori ◽  
Tatsuaki Sakamoto
Keyword(s):  
Electron Microscopy ◽  
Solid Solution ◽  
Solid Solutions ◽  
Photoelectron Spectroscopy ◽  
Synthesis Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Co Precipitation ◽  
Ionic States

CeO2-based solid solutions in which Pd partially substitutes for Ce attract considerable attention, owing to their high catalytic performances. In this study, the solid solution (Ce1−xPdxO2−δ) with a high Pd content (x ~ 0.2) was synthesized through co-precipitation under oxidative conditions using molten nitrate, and its structure and thermal decomposition were examined. The characteristics of the solid solution, such as the change in a lattice constant, inhibition of sintering, and ionic states, were examined using X-ray diffraction (XRD), scanning electron microscopy–energy-dispersive X-ray spectroscopy (SEM−EDS), transmission electron microscopy (TEM)−EDS, and X-ray photoelectron spectroscopy (XPS). The synthesis method proposed in this study appears suitable for the easy preparation of CeO2 solid solutions with a high Pd content.

scholarly journals Silver Orthophosphate Immobilized on Flaky Layered Double Hydroxides as the Visible-Light-Driven Photocatalysts

2012 ◽  
Vol 2012 ◽  
pp. 1-6 ◽  
Author(s):  
Xianlu Cui ◽  
Yaogang Li ◽  
Qinghong Zhang ◽  
Hongzhi Wang
Keyword(s):  
Visible Light ◽  
Diffuse Reflectance Spectroscopy ◽  
Diffraction Field ◽  
X Ray Diffraction ◽  
Transmission Electron ◽  
Photocatalytic Activities ◽  
Visible Light Driven ◽  
Double Hydroxide ◽  
Double Hydroxides ◽  
Acid Red G

Flaky layered double hydroxide (FLDH) was prepared by the reconstruction of its oxide in alkali solution. The composites with FLDH/Ag3PO4mass ratios at 1.6 : 1 and 3 : 1 were fabricated by the coprecipitation method. The powders were characterized by X-ray diffraction, field-emission scanning electron microscopy, transmission electron microscope, and UV-vis diffuse reflectance spectroscopy. The results indicated that the well-distributed Ag3PO4in a fine crystallite size was formed on the surface of FLDH. The photocatalytic activities of the Ag3PO4immobilized on FLDH were significantly enhanced for the degradation of acid red G under visible light irradiation compared to bare Ag3PO4. The composite with the FLDH/Ag3PO4mass ratio of 3 : 1 showed a higher photocatalytic efficiency.

scholarly journals Microwave-assisted preparation of ZnS and ZnSe nanocrystals with different morphologies for photodegradation process of organic dyes

2019 ◽  
Author(s):  
Katarzyna Matras-Postolek ◽  
A. Zaba ◽  
S. Sovinska ◽  
D. Bogdal
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Organic Dyes ◽  
Zinc Sulphide ◽  
Conventional Heating ◽  
Bet Surface Area ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Vis Spectroscopy

Zinc sulphide (ZnS) and zinc selenide (ZnSe) and manganese-doped and un-doped with different morphologies from 1D do 3D microflowers were successfully fabricated in only a few minutes by solvothermal reactions under microwave irradiation. In order to compare the effect of microwave heating on the properties of obtained  nanocrystals, additionally the synthesis under conventional heating was conducted additionally in similar conditions. The obtained nanocrystals were systematically characterized in terms of structural and optical properties using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), diffuse reflectance UV-Vis spectroscopy (DR UV-Vis), Fourier-transform infrared spectroscopy (FT-IR), photoluminescence spectroscopy (PL), X-ray photoelectron spectroscopy (XPS) and Brunauer-Emmett-Teller (BET) surface area analysis. The photocatalytic activity of ZnSe, ZnS, ZnS:Mn and ZnSe:Mn nanocrystals with different morphologies was evaluated by the degradation of methyl orange (MO) and Rhodamine 6G (R6G), respectively. The results show that Mn doped NCs samples had higher coefficient of degradation of organic dyes under ultraviolet irradiation (UV).

The Influence of Introduction of Polyethylene Glycol on Synthesis of Bimodal Mesoporous γ-Al2O3

2013 ◽  
Vol 709 ◽  
pp. 89-92
Author(s):  
Xiang Li ◽  
Xin Mei Liu ◽  
Zi Feng Yan
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Polyethylene Glycol ◽  
Bet Surface Area ◽  
X Ray Diffraction ◽  
Relative Crystallinity ◽  
X Ray ◽  
Transmission Electron ◽  
Increasing Trend ◽  
Opposite Tendency

In the presence of polyethylene glycol (PEG2W),bimodal mesoporous γ-Al2O3 was successfully synthesized via hydrothermal method. The samples were respectively characterized by X-ray diffraction (XRD), N2 physisorption, transmission electron microscopy (TEM), thermogravimetric and differential scanning calorimeter (TG-DSC). Introduction of PEG2W can increase the relative crystallinity of AACH and γ-Al2O3. The BET surface area and pore volume of alumina shows an increasing trend with increasing of PEG2W content, while the pore size shows an opposite tendency. The PEG2W also plays an important role in inducing the formation of the nanorod-like alumina.

scholarly journals Biomass-Derived Activated Carbon as a Catalyst for the Effective Degradation of Rhodamine B dye

Processes ◽  
2020 ◽  
Vol 8 (8) ◽  
pp. 926
Author(s):  
Shamim Ahmed Hira ◽  
Mohammad Yusuf ◽  
Dicky Annas ◽  
Hu Shi Hui ◽  
Kang Hyun Park
Keyword(s):  
Electron Microscopy ◽  
Activated Carbon ◽  
Rhodamine B ◽  
Photoelectron Spectroscopy ◽  
High Specific Surface Area ◽  
High Porosity ◽  
X Ray Diffraction ◽  
Experimental Conditions ◽  
X Ray ◽  
Transmission Electron

Activated carbon (AC) was fabricated from carrot waste using ZnCl2 as the activating agent and calcined at 700 °C for 2 h in a tube furnace. The as-synthesized AC was characterized using Fourier-transform infrared spectroscopy, X-ray diffraction analysis, scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, and Brunauer–Emmett–Teller analysis; the results revealed that it exhibited a high specific surface area and high porosity. Moreover, this material displayed superior catalytic activity for the degradation of toxic Rhodamine B (RhB) dye. Rate constant for the degradation of RhB was ascertained at different experimental conditions. Lastly, we used the Arrhenius equation and determined that the activation energy for the decomposition of RhB using AC was approximately 35.9 kJ mol−1, which was very low. Hopefully it will create a great platform for the degradation of other toxic dye in near future.

Synthesis and Characterization of Lead Sulfide Nanostructures with Different Morphologies via Simple Hydrothermal Method

2016 ◽  
Vol 35 (6) ◽  
pp. 559-566 ◽  
Author(s):  
Elaheh Esmaeili ◽  
Mohammad Sabet ◽  
Masoud Salavati-Niasari ◽  
Kamal Saberyan
Keyword(s):  
Electron Microscopy ◽  
Diffuse Reflectance ◽  
Diffuse Reflectance Spectroscopy ◽  
X Ray Diffraction ◽  
Product Size ◽  
X Ray ◽  
Transmission Electron ◽  
Hydrothermal Approach ◽  
Size And Morphology

AbstractPbS nanostructures were synthesized successfully via hydrothermal approach with a new precursor. The products were characterized with X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and UV–Vis diffuse reflectance spectroscopy (DRS). The effect of different sulfur sources were investigated on product size and morphology.

Characterization and their Fluorescence of Fe3+-Doped La2Zr2O7 Nanocrystals by a Salt-Assistant Combustion Method

2011 ◽  
Vol 306-307 ◽  
pp. 1257-1261 ◽  
Author(s):  
Yun Shan Bai ◽  
Lu De Lu ◽  
Jian Chun Bao
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Solid Solutions ◽  
Low Cost ◽  
Combustion Process ◽  
Combustion Method ◽  
Crystal Form ◽  
X Ray Diffraction ◽  
Visible Absorption ◽  
Transmission Electron

Nanocrystalline Fe3+-doped La2Zr2O7 series solid solutions were prepared by a convenient salt-assisted combustion process using glycine as fuel. The samples were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), Raman spectroscopy, transmission electron microscopy (TEM) and high-resolution transmission electron microscopy (HRTEM). The results showed the La ion can be partially replaced by Fe ion. The partial substituted products were still single-phase solid solutions and the crystal form remained unchanged. TEM images reveal that the products are composed of well-dispersed square-shaped nanocrystals. The method provides a convenient and low-cost route for the synthesis of nanostructures of oxide materials. The fluorescence of La1.8Fe0.2Zr2O7 nanocrystals was evaluated by the UV-visible absorption spectra and the fluorescence spectra. The results indicate that (LaxFe1-x)2Zr2O7 nanocrystals prepared by this method are a kind of potential fluorescent-emitted material.

Sign in / Sign up

Export Citation Format

Share Document