scholarly journals Development of Betamethasone Dipropionate-Loaded Nanostructured Lipid Carriers for Topical and Transdermal Delivery

2019 ◽  
Vol 18 (1) ◽  
pp. 26-44 ◽  
Author(s):  
Pierre A. Hanna ◽  
Mamdouh M. Ghorab ◽  
Shadeed Gad
Keyword(s):  
Oleic Acid ◽  
Drug Release ◽  
Ex Vivo ◽  
Drug Loading ◽  
Skin Penetration ◽  
Nanostructured Lipid Carriers ◽  
Betamethasone Dipropionate ◽  
Topical Formulation ◽  
Scanning Calorimetry ◽  
Acid Percentage

Introduction: Betamethasone dipropionate is a highly effective corticosteroid anti-inflammatory. However, the main drawback of its topical use is the limited skin penetration into deeper skin layers. Also, its systemic use has shown many side effects. </P><P> Objective: The goal of this research was to formulate betamethasone dipropionate in nanostructured lipid carriers (NLC) formulae that contain oleic acid to aid its penetration to deeper skin layers and to aid absorption to local regions upon topical application. </P><P> Methods: NLC formulae were prepared by high shear homogenization then sonication. Formulae were characterized for their particle size, size distribution, electric potential, occlusion factor, entrapment efficiency, drug loading, transmission electron microscopy, in vitro drug release, and ex vivo skin penetration. Compatibility of ingredients with drug was tested using differential scanning calorimetry. Formulae were shown to have appropriate characteristics. NLC formulae were superior to traditional topical formulation in drug release. </P><P> Results: Upon testing ex vivo skin penetration, betamethasone dipropionate prepared in NLC formulae was shown to penetrate more efficiently into skin layers than when formulated as a traditional cream. NLC formulation that contained higher percentage of oleic acid showed higher penetration and higher amount of drug to pass through skin. </P><P> Conclusion: In general, NLC with lower oleic acid percentage was shown to deliver betamethasone dipropionate more efficiently into deeper skin layers while that of a higher oleic acid percentage was shown to deliver the drug more efficiently into deeper skin layers and through the skin, transdermally.

Formulation Optimization and Evaluation of Nanostructured Lipid Carriers Containing Valsartan

2013 ◽  
Vol 6 (2) ◽  
pp. 2077-2086
Author(s):  
Ravish J Patel ◽  
Zil P Patel
Keyword(s):  
Drug Release ◽  
Oral Bioavailability ◽  
Ex Vivo ◽  
Drug Loading ◽  
Nanostructured Lipid Carriers ◽  
Spherical Particles ◽  
Lymphatic Absorption ◽  
Scanning Calorimetry ◽  
First Pass

Nanostructured lipid carriers (NLCs), a lipid based colloidal carrier system, offer many advantages such as increase the solubility, improves the bioavailability and therapeutic efficacy. Incorporation of liquid lipid can improve the drug loading capacity in the NLCs. Valsartan is an antihypertensive drug with low oral bioavailability ranging from 10-35% because of poor solubility and extensive first pass hepatic metabolism. The purpose of present study was to develop and characterize the valsartan loaded nanostructured lipid carriers (Val-NLCs) to enhance the solubility, bypass the hepatic first-pass metabolism, and enhance the lymphatic absorption leading to greater oral bioavailability. Valsartan loaded NLCs were prepared by melt emulsification method and optimized using a two level full factorial design. Effect of content of Capmul MCM EP on crystallinity of tristearin was studied by differential scanning calorimetry (DSC) method. The particle size, entrapment efficiency, drug loading and zeta potential values of optimized batch were 62±0.494 nm, 86.59±0.671, 8.65±0.06 % and -17.4 mV, respectively. TEM images showed spherical particles with diameter of around 50 nm. In vitro drug release of 70% was observed at the end of 12 hrs. Ex-vivo drug release of 90% was observed in 2 hrs. Stability study indicated that the prepared Val-NLCs suspension was stable at refrigerator conditions for one month. Lyophilization produced free flowing Val-NLCs powder from suspension and was easy to reconstitute. Based on these results, it is concluded that NLCs are promising drug delivery for improving the oral bioavailability of valsartan.

Development of Sertaconazole Nitrate Loaded Nanostructured Lipid Carriers Gel Using Central Composite Design: In-vitro and Ex-vivo Evaluation

2020 ◽  
Vol 10 ◽  
Author(s):  
Moreshwar Patil ◽  
Pallavi Bhagade ◽  
Meghana Amale ◽  
Sandeep Sonawane ◽  
Sanjay Kshirsagar
Keyword(s):  
Drug Release ◽  
Central Composite Design ◽  
Total Lipid ◽  
High Speed ◽  
Ex Vivo ◽  
Entrapment Efficiency ◽  
Nanostructured Lipid Carriers ◽  
Topical Formulation ◽  
Central Composite

Aim: The aim of this study was to develop effective topical antifungal formulation containing sertaconazole nitrate. Background: Sertaconazole nitrate, topical antifungal was incorporated in solid-liquid lipid nanostructures and gelled further for topical application. Objective: The objective of this investigation was to develop a topical formulation containing sertaconazole nitrate which was incorporated in the solid state of matrix to prolong the release in deep skin infection and hence reduce the application frequency. Methods: The nanostructured lipid carriers of sertaconazole nitrate were developed by high speed homogenization followed by ultrasonication using Estosoft-GTS® (glyceryl tristearate) as a solid lipid, oleic acid as liquid lipid and Tween 80 as an emulsifier. Central composite design was used to optimize total lipid concentration and fraction of liquid lipid in the total lipid and its effect on entrapment efficiency and drug release was determined. Results: The carrier particles had an average size of 366.3 nm; entrapment efficiency in between 50.66% to 87.36%; cumulative drug release up to 92.90% and zeta potential of 7.43 mV. Characterization by FTIR indicated no negative interaction between drug and excipients, XRD showed disappearance of crystalline peaks of the encapsulated drug while DSC revealed complete solubilization of the drug. About 99.6% of drug was estimated by HPLC method. The drug release from gel and cream was 25.04% and 72.97% respectively. The lipid and gel excipients did not interfere with antifungal activity of the drug. Conclusion: The developed nanocarriers loaded gel were stable. It prolonged the drug release (for 24 hours) than marketed cream. It could be a promising concept for topical delivery of antifungal and anti-inflammatory materials.

The Development of Pemetrexed Diacid-Loaded Gelatin-Cloisite 30B (MMT) Nanocomposite for Improved Oral Efficacy Against Cancer: Characterization, In-Vitro and Ex-Vivo Assessment

2020 ◽  
Vol 17 (3) ◽  
pp. 246-256
Author(s):  
Kriti Soni ◽  
Ali Mujtaba ◽  
Md. Habban Akhter ◽  
Kanchan Kohli
Keyword(s):  
Drug Release ◽  
Oral Delivery ◽  
Ex Vivo ◽  
Confocal Laser ◽  
Release Mechanism ◽  
Scanning Calorimetry ◽  
Sem Images ◽  
Cloisite 30B ◽  
Ft Ir

Aim: The intention of this investigation was to develop Pemetrexed Diacid (PTX)-loaded gelatine-cloisite 30B (MMT) nanocomposite for the potential oral delivery of PTX and the in vitro, and ex vivo assessment. Background: Gelatin/Cloisite 30 B (MMT) nanocomposites were prepared by blending gelatin with MMT in aqueous solution. Methods: PTX was incorporated into the nanocomposite preparation. The nanocomposites were investigated by Fourier Transmission Infra Red Spectroscopy (FT-IR), Differential Scanning Calorimetry (DSC), Scanning Electron Microscope (SEM) X-Ray Diffraction (XRD) and Confocal Laser Microscopy (CLSM). FT-IR of nanocomposite showed the disappearance of all major peaks which corroborated the formation of nanocomposites. The nanocomposites were found to have a particle size of 121.9 ± 1.85 nm and zeta potential -12.1 ± 0.63 mV. DSC thermogram of drug loaded nanocomposites indicated peak at 117.165 oC and 205.816 oC, which clearly revealed that the drug has been incorporated into the nanocomposite because of cross-linking of cloisite 30 B and gelatin in the presence of glutaraldehyde. Results: SEM images of gelatin show a network like structure which disappears in the nanocomposite. The kinetics of the drug release was studied in order to ascertain the type of release mechanism. The drug release from nanocomposites was in a controlled manner, followed by first-order kinetics and the drug release mechanism was found to be of Fickian type. Conclusion: Ex vivo gut permeation studies revealed 4 times enhancement in the permeation of drug present in the nanocomposite as compared to plain drug solution and were further affirmed by CLSM. Thus, gelatin/(MMT) nanocomposite could be promising for the oral delivery of PTX in cancer therapy and future prospects for the industrial pharmacy.

scholarly journals The Correlation between Physical Crosslinking and Water-Soluble Drug Release from Chitosan-Based Microparticles

Pharmaceutics ◽  
2020 ◽  
Vol 12 (5) ◽  
pp. 455
Author(s):  
Emilia Szymańska ◽  
Katarzyna Woś-Latosi ◽  
Julia Jacyna ◽  
Magdalena Dąbrowska ◽  
Joanna Potaś ◽  
...  
Keyword(s):  
Drug Release ◽  
Polymer Matrix ◽  
Drug Loading ◽  
Water Soluble ◽  
Dissolution Behavior ◽  
Complex Nature ◽  
Prolonged Release ◽  
Scanning Calorimetry ◽  
Burst Effect ◽  
The Impact

Microparticles containing water-soluble zidovudine were prepared by spray-drying using chitosan glutamate and beta-glycerophosphate as an ion crosslinker (CF). The Box–Behnken design was applied to optimize the microparticles in terms of their drug loading and release behavior. Physicochemical studies were undertaken to support the results from dissolution tests and to evaluate the impact of the crosslinking ratio on the microparticles’ characteristics. The zidovudine dissolution behavior had a complex nature which comprised two phases: an initial burst effect followed with a prolonged release stage. The initial drug release, which can be modulated by the crosslinking degree, was primarily governed by the dissolution of the drug crystals located on the microparticles’ surfaces. In turn, the further dissolution stage was related to the drug diffusion from the swollen polymer matrix and was found to correlate with the drug loading. Differential Scanning Calorimetry (DSC) studies revealed the partial incorporation of a non-crystallized drug within the polymer matrix, which correlated with the amount of CF. Although CF influenced the swelling capacity of chitosan glutamate microparticles, surprisingly a higher amount of CF did not impact the time required for 80% of the drug to be released markedly. The formulation with the lowest polymer:CF ratio, 3:1, was selected as optimal, providing satisfactory drug loading and displaying a moderate burst effect within the first 30 min of the study, followed with a prolonged drug release of up to 210 min.

scholarly journals Eudragit S-100 coated sodium alginate microspheres of naproxen sodium: Formulation, optimization and in vitro evaluation / Alginatne mikrosfere naproksen natrija obložene Eudragitom S-100: Priprava, optimizacija i in vitro vrednovanje

2012 ◽  
Vol 62 (4) ◽  
pp. 529-545 ◽  
Author(s):  
Anuj Chawla ◽  
Pooja Sharma ◽  
Pravin Pawar
Keyword(s):  
Drug Release ◽  
Sodium Alginate ◽  
Naproxen Sodium ◽  
Drug Loading ◽  
Size Analysis ◽  
Scanning Calorimetry ◽  
Sem Images ◽  
S 100 ◽  
Eudragit S 100

The aim of the study was to prepare site specific drug delivery of naproxen sodium using sodium alginate and Eudragit S-100 as a mucoadhesive and pH-sensitive polymer, respectively. Core microspheres of alginate were prepared by a modified emulsification method followed by cross-linking with CaCl2, which was further coated with the pH dependent polymer Eudragit S-100 (2.5 or 5 %) to prevent drug release in the upper gastrointestinal environment. Microspheres were characterized by FT-IR spectroscopy, X-ray diffraction, differential scanning calorimetry and evaluated by scanning electron microscopy, particle size analysis, drug loading efficiency, in vitro mucoadhesive time study and in vitro drug release study in different simulated gastric fluids. Stability studies of the optimized formulation were carried out for 6 months. SEM images revealed that the surface morphology was rough and smooth for core and coated microspheres, respectively. Core microspheres showed better mucoadhesion compared to coated microspheres when applied to the mucosal surface of freshly excised goat colon. The optimized batch of core microspheres and coated microspheres exhibited 98.42 ± 0.96 and 95.58 ± 0.74 % drug release, respectively. Drug release from all sodium alginate microsphere formulations followed Higuchi kinetics. Moreover, drug release from Eudragit S-100 coated microspheres followed the Korsmeyer-Peppas equation with a Fickian kinetics mechanism. Stability study suggested that the degradation rate constant of microspheres was minimal, indicating 2 years shelf life of the formulation.

scholarly journals Nanostructured Lipid Carrier Gel for the Dermal Application of Lidocaine: Comparison of Skin Penetration Testing Methods

Pharmaceutics ◽  
2019 ◽  
Vol 11 (7) ◽  
pp. 310 ◽  
Author(s):  
Stella Zsikó ◽  
Kendra Cutcher ◽  
Anita Kovács ◽  
Mária Budai-Szűcs ◽  
Attila Gácsi ◽  
...  
Keyword(s):  
Drug Release ◽  
Human Skin ◽  
Ex Vivo ◽  
Study Drug ◽  
Skin Penetration ◽  
Human Epidermis ◽  
Nanostructured Lipid Carrier ◽  
Experimental Findings

The aim of this research was to investigate the stability of a lidocaine-loaded nanostructured lipid carrier dispersion at different temperatures, formulate a nanostructured lipid carrier gel, and test the penetration profile of lidocaine from the nanostructured lipid carrier gel using different skin penetration modeling methods. The formulations were characterized by laser diffraction, rheological measurements and microscopic examinations. Various in vitro methods were used to study drug release, diffusion and penetration. Two types of vertical Franz diffusion cells with three different membranes, including cellulose, Strat-M®, and heat separated human epidermis were used and compared to the Skin-parallel artificial membrane permeability assay (PAMPA) method. Results indicated that the nanostructured lipid carrier dispersion had to be gelified as soon as possible for proper stability. Both the Skin-PAMPA model and Strat-M® membranes correlated favorably with heat separated human epidermis in this research, with the Strat-M® membranes sharing the most similar drug permeability profile to an ex vivo human skin model. Our experimental findings suggest that even when the best available in vitro experiment is selected for modeling human skin penetration to study nanostructured lipid carrier gel systems, relevant in vitro/in vivo correlation should be made to calculate the drug release/permeation in vivo. Future investigations in this field are still needed to demonstrate the influence of membranes and equipment from other classes on other drug candidates.

scholarly journals Formulation and Evaluation of Clarithromycin Loaded Nanostructured Lipid Carriers for the Treatment of Acne

2021 ◽  
pp. 26-38
Author(s):  
Pooja Shettigar ◽  
Marina Koland ◽  
S. M. Sindhoor ◽  
Ananth Prabhu
Keyword(s):  
Electron Microscopy ◽  
Particle Size ◽  
Drug Release ◽  
Ex Vivo ◽  
Entrapment Efficiency ◽  
Nanostructured Lipid Carriers ◽  
In Vitro Drug Release ◽  
Ex Vivo Permeation ◽  
Acne Treatment

Background: Clarithromycin is a macrolide antibiotic used in acne treatment, but it has poor solubility, which decreases its permeability through lipid barriers such as skin. Nanostructured lipid carriers can enhance the permeability of clarithromycin through the skin, thus improving its potential for controlling acne. Aim: To formulate and evaluate Nanostructured lipid carriers of clarithromycin for topical delivery in acne treatment Methods: Nanostructured lipid carriers were prepared by emulsification and ultrasonication methods using lipids such as glycerol monostearate and oleic with poloxamer 188 as stabilizer. These nano-carriers were optimized with the help of the Quality by Design (QbD) approach employing Design-Expert® software. The nanoparticles were characterized for particle size analysis, zeta potential, drug-excipient compatibility, entrapment efficiency, and surface morphology by Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM). The nano-carriers were also investigated for in vitro drug release and ex vivo permeation through excised goat skin. The optimized formulation was incorporated into topical carbopol gel base, formulated and examined for pH, viscosity, spreadability, in vitro drug release, ex vivo permeation, and stability under accelerated conditions. Results: The average particle size of the optimized nanoparticles was 164.8 nm, and zeta potential was -39.2 mV. FTIR studies showed that drug and lipids are compatible with each other. The morphology study by SEM and TEM showed spherical shaped particles. The entrapment efficiency of the optimized formulation was found to be 88.16%. In vitro drug release studies indicated sustained release from the formulation due to diffusion through the lipid matrix of the particles. The ex vivo permeation study using goat skin produced greater permeation from the NLC gel (89.5%) than marketed gel (65%) due to the lipid solubility of the nanoparticles in the skin. The formulation was stable under accelerated conditions. Conclusion: The optimized formulation can be considered as promising nano-carriers suitable for the sustained release of clarithromycin into the skin for effective control of acne.

Facile Synthesis of Chitosan Based-(AMPS-co-AA) Semi-IPNs as a Potential Drug Carrier: Enzymatic Degradation, Cytotoxicity, and Preliminary Safety Evaluation

2019 ◽  
Vol 16 (3) ◽  
pp. 242-253 ◽  
Author(s):  
Kaleem Ullah ◽  
Muhammad Sohail ◽  
Abdul Mannan ◽  
Haroon Rashid ◽  
Aamna Shah ◽  
...  
Keyword(s):  
Drug Release ◽  
Oral Drug Delivery ◽  
Drug Carrier ◽  
Drug Loading ◽  
In Vitro Cytotoxicity ◽  
Oral Drug ◽  
Specific Enzyme ◽  
Oral Toxicity ◽  
Scanning Calorimetry

Objective: The study describes the development of chitosan-based (AMPS-co-AA) semi-IPN hydrogels using free radical polymerization technique. Methods: The resulting hydrogels were characterized using Fourier Transform Infrared Spectroscopy (FTIR), Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC), X-Ray diffraction (XRD), and Scanning Electron Microscopy (SEM). The successful crosslinking of chitosan, 2- Acrylamido-2-Methylpropane Sulfonic Acid (AMPS), and Acrylic Acid (AA) was confirmed by FT IR. Unloaded and drug-loaded hydrogels exhibited higher thermal stability after crosslinking compared to the individual components. XRD confirmed the decrease in crystallinity after hydrogel formation and molecular dispersion of Oxaliplatin (OXP) in the polymeric network. SEM showed rough, vague and nebulous surface resulting from crosslinking and loading of OXP. Results: The experimental results revealed that swelling and drug release were influenced by the pH of the medium being low at acidic pH and higher at basic pH. Increasing the concentration of chitosan and AA enhanced the swelling, drug loading and drug release while AMPS was found to act inversely. Conclusion: It was confirmed that the hydrogels were degraded more by specific enzyme lysozyme as compared to the non-specific enzyme collagenase. In-vitro cytotoxicity suggested that the unloaded hydrogels were non-cytotoxic while crude drug and drug-loaded hydrogel exhibited dose-dependent cytotoxicity against HCT-116 and MCF-7. Results of acute oral toxicity on rabbits demonstrated that the hydrogels are non-toxic up to 3900 mg/kg after oral administration, as no toxicity or histopathological changes were observed in comparison to control rabbits. These pH-sensitive hydrogels appear to provide an ideal basis as a safe carrier for oral drug delivery.

FORMULATION AND DEVELOPMENT OF EXTENDED RELEASE MATRIX PELLETS OF WATER INSOLUBLE AZILSARTAN MEDOXOMIL WITH SOLID DISPERSION

INDIAN DRUGS ◽  
2019 ◽  
Vol 56 (02) ◽  
pp. 21-30
Author(s):  
V. V. Pande ◽  
◽  
V. M. Sanklecha ◽  
S. R Arote
Keyword(s):  
Drug Release ◽  
Solid Dispersion ◽  
Extended Release ◽  
Guar Gum ◽  
Drug Loading ◽  
Scanning Calorimetry ◽  
Drug Content ◽  
Rate Kinetics ◽  
Evaporation Technique ◽  
Azilsartan Medoxomil

The present study involved the design and development of extended release matrix pellets of azilsartan medoxomil with its solid dispersion (Azil SD). A solid dispersion of azilsartan medoxomil was prepared with a carrier, Hypromallose acetate succinate (Affinisol 716G) by solvent evaporation technique. Extended release matrix pellets were prepared from Azil SD using a combination of polycarbophil, HPMC K4M, MCC and guar gum. AzilSD and the pellets were evaluated for various physicochemical properties such as solubility, drug loading, drug content, surface morphology and swelling behaviourand analysis carried out using Fourier transform infrared spectroscopy, differential scanning calorimetry and powder X-ray diffraction. The solubility and dissolution rate of Azil SD was 5.71 and 2.07 times greater, respectively.The optimized batch was selected based on 100% cumulative drug release in 12 hours. Formulation Batch F6 showed 99.19% CDR in 12 hours and drug content 97.89 %. The mechanism of the drug release rate kinetics of the Batch F6 followed the Korsmeyer-Peppas. Thus it can be concluded that Affinisol 716G based solid dispersion mechanism, enhances the solubility and dissolution of azilsartan medoxomil by using polycarbophil and HPMC K4M, forming an effective carrier for developing extended release matrix pellets.

Sign in / Sign up

Export Citation Format

Share Document