scholarly journals Control of Deformation of Elastic Polymer-Abrasive Circles at their Wear

2022 ◽  
Author(s):  
D. Podashev
Keyword(s):  
Cutting Speed ◽  
High Strength ◽  
Wear Intensity ◽  
Process Performance ◽  
Finishing Process ◽  
Continuous Surface ◽  
High Strength Aluminum Alloys ◽  
Deformation Correction ◽  
Elastic Polymer

Abstract. The article is devoted to the study of the wear intensity of elastic polymer-abrasive circles when processing the surfaces of parts made of high-strength aluminum alloys. Empirical dependencies of wear on cutting speed and tool deformation are obtained, on the basis of which method of tool deformation correction with long-term, continuous surface treatment is proposed. In practice, such a procedure is necessary due to the loss of process performance that occurs due to the reduction of tool deformation due to wear. The proposed technique allows to effectively control the finishing process as the tool is worn out.

Deformation and fracture behavior of an Al-Li-Cu-Mg-Zr alloy 8090

1990 ◽  
Vol 48 (4) ◽  
pp. 974-975
Author(s):  
D.M. Jiang ◽  
B.D. Hong
Keyword(s):  
High Strength ◽  
Deformation And Fracture ◽  
Fracture Behaviors ◽  
Aluminum Lithium ◽  
Carbon Fiber Reinforced Composites ◽  
Peak Aged ◽  
Aluminum Lithium Alloys ◽  
High Strength Aluminum Alloys ◽  
Lithium Alloys ◽  
Zr Alloy

Aluminum-lithium alloys have been recently got strong interests especially in the aircraft industry. Compared to conventional high strength aluminum alloys of the 2000 or 7000 series it is anticipated that these alloys offer a 10% increase in the stiffness and a 10% decrease in density, thus making them rather competitive to new up-coming non-metallic materials like carbon fiber reinforced composites.The object of the present paper is to evaluate the inluence of various microstructural features on the monotonic and cyclic deformation and fracture behaviors of Al-Li based alloy. The material used was 8090 alloy. After solution treated and waster quenched, the alloy was underaged (190°Clh), peak-aged (190°C24h) and overaged (150°C4h+230°C16h). The alloy in different aging condition was tensile and fatigue tested, the resultant fractures were observed in SEM. The deformation behavior was studied in TEM.

Subcritical Crack Growth and Long-Term Strength in Rock and High-Strength and Ultra Low-Permeability Concrete

2009 ◽  
Vol 58 (6) ◽  
pp. 525-532 ◽  
Author(s):  
Yoshitaka NARA ◽  
Masafumi TAKADA ◽  
Daisuke MORI ◽  
Hitoshi OWADA ◽  
Tetsuro YONEDA ◽  
...  
Keyword(s):  
Crack Growth ◽  
Subcritical Crack Growth ◽  
High Strength ◽  
Low Permeability ◽  
Term Strength

KUBOTA KNC-03

Alloy Digest ◽  
2010 ◽  
Vol 59 (1) ◽  
Keyword(s):  
Compressive Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Temperature Performance ◽  
Resistance To Oxidation

Abstract Kubota KNC-03 is a grade with a combination of high strength and excellent resistance to oxidation. These properties make this alloy suitable for long-term service at temperature up to 1250 deg C (2282 deg F). This datasheet provides information on physical properties, hardness, elasticity, tensile properties, and compressive strength as well as creep. It also includes information on high temperature performance as well as casting and joining. Filing Code: Ni-676. Producer or source: Kubota Metal Corporation, Fahramet Division. See also Alloy Digest Ni-662, April 2008.

ATI 6-2-4-2

Alloy Digest ◽  
2020 ◽  
Vol 69 (8) ◽  
Keyword(s):  
Tensile Strength ◽  
Titanium Alloy ◽  
High Temperature ◽  
Creep Strength ◽  
High Strength ◽  
Heat Treating ◽  
Good Combination ◽  
Long Term Stability ◽  
Temperature Performance

Abstract ATI 6-2-4-2 is a near-alpha, high strength, titanium alloy that exhibits a good combination of tensile strength, creep strength, toughness, and long-term stability at temperatures up to 425 °C (800 °F). Silicon up to 0.1% frequently is added to improve the creep resistance of the alloy. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as creep. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: Ti-169. Producer or Source: ATI.

scholarly journals Surface Modification of Aluminum 6061-O Alloy by Plasma Electrolytic Oxidation to Improve Corrosion Resistance Properties

Coatings ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 4
Author(s):  
Dmitry V. Dzhurinskiy ◽  
Stanislav S. Dautov ◽  
Petr G. Shornikov ◽  
Iskander Sh. Akhatov
Keyword(s):  
Corrosion Resistance ◽  
Aluminum Alloy ◽  
Aluminum Alloys ◽  
Plasma Electrolytic Oxidation ◽  
Electrochemical Impedance ◽  
High Strength ◽  
Electrolytic Oxidation ◽  
Coating Layers ◽  
Plasma Electrolytic ◽  
High Strength Aluminum Alloys

In the present investigation, the plasma electrolytic oxidation (PEO) process was employed to form aluminum oxide coating layers to enhance corrosion resistance properties of high-strength aluminum alloys. The formed protective coating layers were examined by means of scanning electron microscopy (SEM) and characterized by several electrochemical techniques, including open circuit potential (OCP), linear potentiodynamic polarization (LP) and electrochemical impedance spectroscopy (EIS). The results were reported in comparison with the bare 6061-O aluminum alloy to determine the corrosion performance of the coated 6061-O alloy. The PEO-treated aluminum alloy showed substantially higher corrosion resistance in comparison with the untreated substrate material. A relationship was found between the coating formation stage, process parameters and the thickness of the oxide-formed layers, which has a measurable influence on enhancing corrosion resistance properties. This study demonstrates promising results of utilizing PEO process to enhance corrosion resistance properties of high-strength aluminum alloys and could be recommended as a method used in industrial applications.

scholarly journals High-strength and fibrous capsule–resistant zwitterionic elastomers

2021 ◽  
Vol 7 (1) ◽  
pp. eabc5442
Author(s):  
Dianyu Dong ◽  
Caroline Tsao ◽  
Hsiang-Chieh Hung ◽  
Fanglian Yao ◽  
Chenjue Tang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Mechanical Strength ◽  
High Strength ◽  
Design Principles ◽  
Fibrous Capsule ◽  
High Mechanical Strength ◽  
Capsule Formation ◽  
Locking Mechanism ◽  
Fibrous Capsule Formation

The high mechanical strength and long-term resistance to the fibrous capsule formation are two major challenges for implantable materials. Unfortunately, these two distinct properties do not come together and instead compromise each other. Here, we report a unique class of materials by integrating two weak zwitterionic hydrogels into an elastomer-like high-strength pure zwitterionic hydrogel via a “swelling” and “locking” mechanism. These zwitterionic-elastomeric-networked (ZEN) hydrogels are further shown to efficaciously resist the fibrous capsule formation upon implantation in mice for up to 1 year. Such materials with both high mechanical properties and long-term fibrous capsule resistance have never been achieved before. This work not only demonstrates a class of durable and fibrous capsule–resistant materials but also provides design principles for zwitterionic elastomeric hydrogels.

scholarly journals Optimising the performance of a lab-scale tidal flow reed bed system treating agricultural wastewater

2004 ◽  
Vol 50 (8) ◽  
pp. 65-72 ◽  
Author(s):  
Y.Q. Zhao ◽  
G. Sun ◽  
C. Lafferty ◽  
S.J. Allen
Keyword(s):  
Tidal Flow ◽  
High Strength ◽  
Pollutant Removal ◽  
Inorganic Pollutants ◽  
Operational Conditions ◽  
Agricultural Wastewater ◽  
Major Route ◽  
Reed Bed ◽  
Ammoniacal Nitrogen Removal

A gravel-based tidal flow reed bed system was operated with three different strategies in order to investigate its optimal performance for the treatment of a high strength agricultural wastewater. According to the three strategies, individual reed beds were saturated and unsaturated with the wastewater for different periods while reasonably stable hydraulic and organic loadings were maintained. Experimental results demonstrated that the system produced the highest pollutant removal efficiencies with a relatively short saturated period and long unsaturated period, highlighting the importance of oxygen transfer into reed bed matrices during the treatment. Significant removals of some major organic and inorganic pollutants were achieved under all three operational conditions. Nitrification was not the major route of ammoniacal-nitrogen removal when the system was under high organic loading. Due to the filtration of suspended solids and the accumulation of biomass, gradual clogging of the reed bed matrices took place, which caused concerns over the long-term efficiency of the tidal flow system.

scholarly journals Accelerated discovery of high-strength aluminum alloys by machine learning

2020 ◽  
Vol 1 (1) ◽  
Author(s):  
Jiaheng Li ◽  
Yingbo Zhang ◽  
Xinyu Cao ◽  
Qi Zeng ◽  
Ye Zhuang ◽  
...  
Keyword(s):  
Machine Learning ◽  
Aluminum Alloys ◽  
Mechanical Performance ◽  
High Strength ◽  
Cost Effective ◽  
Alloy System ◽  
Processing Route ◽  
Specific Strength ◽  
Cu Alloy ◽  
High Strength Aluminum Alloys

Abstract Aluminum alloys are attractive for a number of applications due to their high specific strength, and developing new compositions is a major goal in the structural materials community. Here, we investigate the Al-Zn-Mg-Cu alloy system (7xxx series) by machine learning-based composition and process optimization. The discovered optimized alloy is compositionally lean with a high ultimate tensile strength of 952 MPa and 6.3% elongation following a cost-effective processing route. We find that the Al8Cu4Y phase in wrought 7xxx-T6 alloys exists in the form of a nanoscale network structure along sub-grain boundaries besides the common irregular-shaped particles. Our study demonstrates the feasibility of using machine learning to search for 7xxx alloys with good mechanical performance.

Sign in / Sign up

Export Citation Format

Share Document