scholarly journals Development and Ex vivo evaluation of Rasagiline Mesylate mucoadhesive microemulsion for intranasal delivery using Box-Behnken design

2019 ◽  
Vol 8 (3) ◽  
pp. 2514-2522
Author(s):  
Krishnaveni Janapareddi ◽  
Anilgoud Kandhula

Rasagiline mesylate (RM), an irreversible, selective inhibitor of MAO-B enzyme, is used in the treatment of Parkinson’s disease as oral tablets. It has low oral bioavailability (36%) due to hepatic first pass metabolism. Oral route of administration is associated with nausea and vomiting. Hence present research work was aimed to develop intranasal RM- loaded mucoadhesive microemulsions for brain targeting via olfactory pathway. The microemulsions were developed using Box Behnken design and evaluated for globule size, PDI, Zeta potential, pH, viscosity and ex vivo permeation on excised porcine nasal mucosa. Based on drug solubility, Capmul MCM, Tween 20 and Transcutol P were selected as oil, surfactant and cosurfactant respectively. Microemulsions were prepared by water titration method. Pseudoternary phase diagrams were constructed and the levels of surfactants, oil were selected. The influence of independent variables such as oil, Smix and water on responses size, zeta potential and flux were studied with the help of polynomial equations, contour plots and 3D response surface plots generated by design expert software. Optimized microemulsion formulation (ME18) was composed of oil (Capmul MCM), Smix (Tween 20: Transcutol P; 1:1), water and drug in the ratio 5:42:65:5.The globule size, zeta potential and flux of the optimized microemulsion was 150 nm, -29.6 mV and 291.7 μg/cm2/h respectively. Mucoadhesive agent (Chitosan) was added at 0.5% concentration to optimized microemulsion formulation (MME18). The size, zeta potential and flux of the MME18 was 176.4 nm, 12.1 mV and 323.1 μg/cm2/h respectively. The flux of ME18 and MME 18 was significantly higher than drug solution. The enhancement ratio of MME 18 was 4.2 times to that of drug solution, indicating potential advantage of microemulsion formulation.

2020 ◽  
Vol 6 (1) ◽  
Author(s):  
Navneet Kumar ◽  
Rohan Aggarwal ◽  
Meenakshi K. Chauhan

Abstract Background Majorly, the reason for the permanent loss of vision is glaucoma. But the currently available common treatment methodologies such as eye drops have various disadvantages like patient incompliance due to repeated administration and poor (1–5%) bioavailability leading to poor efficiency. The objective of this research was to formulate Eudragit-based nanoparticles of levobunolol incorporated into a contact lens to obtain sustained ocular delivery of levobunolol at the therapeutics level. Eudragit nanoparticles of levobunolol were formulated by nanoprecipitation methodology utilizing different ratios of Eudragit S100 and polyvinyl alcohol. The prepared nanoparticles were evaluated and optimized by efficiency of entrapment, particle size, morphology of surface and zeta potential. The optimized nanoparticles were then entrapped into the matrix of the contact lens by the soaking method which were then characterized and compared for optical clarity study, equilibrium swelling study, shelf life and in vitro drug release in simulated tear fluid followed by ex vivo transcorneal permeation study. Results Formulation F3 was obtained as optimized nanoparticle formulation with 102.61 nm ± 3.92 of particle size, − 22.2 mV ± 2.76 of zeta potential and 86.995% ± 1.902 of efficiency of entrapment. The equilibrium swelling index and transmittance of nanoparticle incorporated into contact lenses showed better results when compared to drug solution-loaded lenses. In vitro release indicated more sustained drug profiles (84.33% ± 0.34 of drug release over a period of 12 days) as compared to drug solution-loaded lenses (89.282% ± 0.900 of drug release over a period of 3 days). Ex vivo transcorneal permeation studies showed more permeation (6.75% ± 0.170) through contact lenses as compared to marketed eye drops (3.03% ± 0.088). Conclusion This research demonstrates the remarkable results of drug-laden contact lenses to serve as a great medium for the continued delivery of ocular drugs without affecting the physical and optical characteristics of the lens content.


2019 ◽  
Vol 14 (1) ◽  
pp. 1
Author(s):  
Annis Catur Adi ◽  
Nelly Setiawaty ◽  
Atsarina Anindya ◽  
Heni Rachmawati

Vitamin A is an essential nutrient to support the function of vision, growth, and immune system. Vitamin A cannot be synthesized in the body hence must be obtained through foods or supplements. However, oral administration of vitamin A is often hindered by poor absorption due to its hydrophobic nature and by its easily degradable nature by light and oxygen, particularly at high temperature. This study aimed to prepare a self-assembly vitamin A nanoemulsion with a high loading capacity to improve vitamin A absorption accross intestinal mucosa and to slow down its degradation process. The nanoemulsion was composed by glyceryl monooleate, Cremophor RH-40, and PEG 400 (1:8:1), then titrated with aqueous phase. The nanoemulsion characterization included globule size evaluation, size distribution, zeta potential, globule morphology, entrapment efficiency, physical and chemical stabilities, and ex vivo penetration test on New Zealand albino rabbit intestines. The vitamin A nanoemulsion was found to form transparent and nano-sized emulsions even when loaded with 16.67% vitamin A. The formula also produced 58.1±2.0 nm spherical globules with -0.69 mV zeta potential. Entrapment efficiency of vitamin A in the nanoemulsion was higher than 95%. The nanoemulsion shows stable after storage for 10 days at room temperature, as well as able to increase penetration rate compared to free vitamin A. Taken together, our established vitamin A nanoemulsion has a good stability and was proved to increase vitamin A absorption through intestinal mucosa while simultaneously decreased the vitamin A degradation rate.


Author(s):  
Pallavi M Chaudhari ◽  
Madhavi A Kuchekar

Objective: The aim of this study was to develop a nanoemulsion for topical delivery. Methods: Topical nanoemulsion was prepared by homogenization method. Box-behnken design was utilized to study the effect of oil, surfactant and Co-surfactant, on droplet size, entrapment efficiency and drug release. Nabumetone a non-steroidal anti-inflammatory drug was incorporated in castor oil with Tween 80 and Polyethylene glycol 600 to form the nanoemulsion by homogenization method. The nanoemulsion was further subjected to different evaluation parameters and ex-vivo study. The crystalline nature of drug was confirmed by powder X-ray diffraction studies. Drug-excipient compatibility was confirmed by Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), respectively. Results: The average globule size of nabumetone-containing nanoemulsion decreased with decrease in concentration of oil and surfactant. Nanoemulsion was evaluated by pH, rheology, globule size, zeta potential, scanning electron microscopy, DSC, FTIR spectroscopy, and stability. In vitro drug release shows maximum 84.35% permeation rate through cellophane membrane and ex-vivo drug release shows 86.32% permeation rate through goat skin. Conclusion: Thus, the nanoemulsion formulated showed good results regarding topical delivery.


Author(s):  
Swati Jagdale ◽  
Sujata Brahmane ◽  
Anuruddha Chabukswar

Background: Tizanidine hydrochloride acts centrally as a muscle relaxant. It is used for the treatment of painful muscle spasm, spasticity associated with multiple sclerosis or spinal cord injury and treatment of muscle spasticity in spinal cord disease. Tizanidine hydrochloride belongs to BCS class II. It has low oral bioavailability and short halflife. Incorporating this drug in microemulgel is an excellent way to overcome problems associated with the drug. Objective: Present research work was aimed to develop and optimize a microemulsion based gel system for tizanidine hydrochloride. Methods: Screening of oil, surfactant and co-surfactant was carried out. Ternary phase diagram was constructed to obtain concentration range of components. The prepared microemulsion was evaluated for pH, globule size, zeta potential, conductivity, density and viscosity. 32 level factorial design was applied to study the effect of concentration of carbopol 934 and HPMC K15M on % cumulative drug release and viscosity of microemulgel using software Design Expert. Microemulgel was evaluated for pH, spreadability, viscosity, syneresis, drug content, bioadhesive strength, in-vitro as well as ex-vivo diffusion study. Results: Microemulsion was prepared by using isopropyl myristate as oil, tween 80 as a surfactant and transcutol P as cosurfactant. Largest transparent microemulsion region was found with Smix ratio of 1:1. FE-SEM showed globule size 28μm for batch B1 and zeta potential was -1.27mV indicating good stability of the microemulsion. Optimised batch was F6 which showed 92% drug release within 8 hours. It followed the Korsmeyer-Peppas model. Conclusion: A stable, effective and elegant microemulgel formulation, exhibiting good in-vitro and ex-vivo drug release was formulated.


Author(s):  
DIVYA AJMEERA ◽  
SARANGAPANI MANDA ◽  
KRISHNAVENI JANAPAREDDI ◽  
SUSMITHA KOLLURI

Objective: To develop a new cationic nanoemulsion (NE) for ophthalmic delivery of indomethacin (IND) to improve the permeability and retention time of formulations, thereby improving the drug's ocular bioavailability. Methods: Based on the solubility profile of indomethacin in various solvents, captex 8000 was selected as oil phase, span 20 as a surfactant and tween 20 as co-surfactant to construct pseudo ternary phase diagrams and nanoemulsion region was recognized. Sonication was used as the method of NE preparation. Optimization was done using 32 factorial designs by considering the oil and the ratio of surfactant to co-surfactant (Smix) quantities as independent variables and evaluated for different physicochemical properties. Ex vivo transcorneal permeability was studied using bovine cornea, the In vivo drug pharmacokinetics of optimized NE and marketed formulation were assessed in rabbit aqueous humor and also in plasma. Results: The mean globule size, zeta potential, viscosity, refractive index, pH, surface tension and the osmolarity values for the prepared indomethacin nanoemulsions (IND-NEs) were found between 129.8±1.1 to 191.4±1.6 nm,+13.20±4.6 to+23.45±4.82, 15.3±0.1 to 32.7±0.0 mPas, 1.346±0.007 to 1.386±0.005, 5.5±0.4 to 6.9±0.9, 32.0±2.6 to 52.3±3.4 mN/m and 303-395 mOsm/l respectively and all these values found to be falling under the recommended values for ophthalmic use. From the In vitro release studies, it was found that the IND-NEs exhibited sustained drug release with 67.91±2.01 to 95.90±1.93 % drug release at 24h when compared to the drug solution which showed 99.81±5.21 % drug release within 2h. The Ex vivo drug permeation through the corneal membrane at 4h from the optimized NE and drug solution was found to be 524±1.5 µg/cm2 and 175±2.6 µg/cm2 respectively. Further, the optimized NE was found to be nonirritant with the lowest ocular irritation potential (Iirr) of 1 towards the rabbit's eyes. The area under the drug concentration vs. time curve for 24h (AUC (0–24h)) for optimized NE and the marketed formulation was found to be 1514.99 ng/ml/h and 974.14 ng/ml/h in aqueous humour; 2266.83 ng/ml/h and 778.15 ng/ml/h in plasma respectively. Conclusion: Due to its improved corneal absorption and prolonged drug release along with less systemic absorption, the optimized NE offers an effective postoperative treatment with increased ocular bioavailability and improved patient compliance with a decrease in the number of installations per day and a decrease or disappearance of systemic side effects of IND.


2020 ◽  
Vol 10 (6) ◽  
pp. 766-777
Author(s):  
Inayat B. Pathan ◽  
Mahesh Sakhare ◽  
Wahid Ambekar ◽  
Chitral M. Setty

Background: Transdermal delivery of meloxicam is advantageous than the oral route in the treatment of pain management. Objective: The goal of the present study is to formulate and evaluate meloxicam (MX) loaded nanosuspensions based gel for transdermal application. Methods: The formulation parameters were optimized using Box Behnken design (BBD) taking three independent variables and three responses. Formulations were evaluated for particle size (nm), polydispersity index (PDI), zeta potential (mV), ex vivo permeation, in vivo study, morphology, FTIR, skin irritation and, stability study. Optimized formulation having Poloxamer 188 (0.4 mg), PVP K30 (0.5 mg) and sonication time (60 min.) demonstrated smaller particle size (159.2 ± 3.5 nm), low PDI (0.120 ± 0.01) and higher zeta potential value (-29 ± 4mV). Results: In the ex vivo study, MX-NG showed a significant increase (p<0.05) in the flux (24.40 ± 2.6 μg/cm2/h) of meloxicam through the human cadaver skin as compared to other formulations. In the in- vivo study, MX-NG showed a significant (p<0.05) increase in anti-inflammatory activity as compared to marketed gel. Conclusion: Thus, it is concluded that the developed meloxicam loaded nanosuspensions based gel showed maximum therapeutic effects in rats.


2015 ◽  
Vol 51 (3) ◽  
pp. 721-731 ◽  
Author(s):  
Surjyanarayan Mandal ◽  
Snigdha Das Mandal ◽  
Krishna Chuttani ◽  
Bharat Bhushan Subudhi

This study aimed at designing mucoadhesive microemulsion gel to enhance the brain uptake of Ibuprofen through intranasal route. Ibuprofen loaded mucoadhesive microemulsion (MMEI) was developed by incorporating polycarbophil as mucoadhesive polymer into Capmul MCM based optimal microemulsion (MEI) and was subjected to characterization, stability, mucoadhesion and naso-ciliotoxicity study. Brain uptake of ibuprofen via nasal route was studied by performing biodistribution study in Swiss albino rats. MEI was found to be transparent, stable and non ciliotoxic with 66.29 ± 4.15 nm, -20.9 ± 3.98 mV and 98.66 ± 1.01% as average globule size, zeta potential and drug content respectively. Transmission Electron Microscopy (TEM) study revealed the narrow globule size distribution of MEI. Following single intranasal administration of MMEI and MEI at a dose of 2.86 mg/kg, uptake of ibuprofen in the olfactory bulb was around 3.0 and 1.7 folds compared with intravenous injection of ibuprofen solution (IDS). The ratios of AUC in brain tissues to that in plasma obtained after nasal administration of MMEI were significantly higher than those after intravenous administration of IDS. Findings of the present investigation revealed that the developed mucoadhesive microemulsion gel could be a promising approach for brain targeting of ibuprofen through intranasal route.


Author(s):  
Ashwin Kumar Tulasi ◽  
Anil Goud Kandhula ◽  
Ravi Krishna Velupula

Topiramate is a second-generation antiepileptic drug used in partial, generalized seizures as an oral tablet. Oral route of administration is most convenient but shows delayed absorption. Moreover, in emergency cases, parenteral administration is not possible as it requires medical assistance. Hence, the present study was aimed to develop topiramate mucoadhesive nanoparticles for intranasal administration using ionotropic gelation method. The developed nanoparticles were evaluated for physico-chemical properties like particle size, zeta potential, surface morphology, drug content, entrapment efficiency, in vitro drug release, mucoadhesive strength, and ex vivo permeation studies in excised porcine nasal mucosa. Optimized nanoparticle formulation (T9) was composed oil mucoadhesive agent (Chitosan 1% w/w), cross linking polymer (TPP) and topiramate 275mg, 100mg and 4% respectively. It showed particle size of 350nm, high encapsulation efficacy and strong mucoadhesive strength. In vitro drug diffusion of optimized formulation showed 95.12% release of drug after 180min. Ex-vivo permeation of drug across nasal mucosa was   88.05 % after 180min. Nasocilial toxicity studies showed optimized formulation did not damage the nasal mucosa. Thus, the intranasal administration of topiramate using chitosan can be a promising alternative for brain targeting and the treatment of epilepsy.


2020 ◽  
Vol 10 ◽  
Author(s):  
Divya Thakur ◽  
Gurpreet Kaur ◽  
Sheetu Wadhwa ◽  
Ashana Puri

Background: Metronidazole (MTZ) is an anti-oxidant and anti-inflammatory agent with beneficial therapeutic properties. The hydrophilic nature of molecule limits its penetration across the skin. Existing commercial formulations have limitations of inadequate drug concentration present at target site, which requires frequent administration and poor patient compliance. Objective: The aim of current study was to develop and evaluate water in oil microemulsion of Metronidazole with higher skin retention for treatment of inflammatory skin disorders. Methods: Pseudo ternary phase diagrams were used in order to select the appropriate ratio of surfactant and co-surfactant and identify the microemulsion area. The selected formulation consisted of Capmul MCM as oil, Tween 20 and Span 20 as surfactant and co-surfactant, respectively, and water. The formulation was characterized and evaluated for stability, Ex vivo permeation studies and in vivo anti-inflammatory effect (carrageenan induced rat paw edema, air pouch model), anti-psoriatic activity (mouse-tail test). Results: The particle size analyses revealed average diameter and polydispersity index of selected formulation to be 16 nm and 0.373, respectively. The results of ex vivo permeation studies showed statistically higher mean cumulative amount of MTZ retained in rat skin from microemulsion i.e. 21.90 ± 1.92 μg/cm2 which was 6.65 times higher as compared to Marketed gel (Metrogyl gel®) with 3.29 ± 0.11 μg/cm2 (p<0.05). The results of in vivo studies suggested the microemulsion based formulation of MTZ to be similar in efficacy to Metrogyl gel®. Conclusion: Research suggests efficacy of the developed MTZ loaded microemulsion in treatment of chronic skin inflammatory disorders.


Sign in / Sign up

Export Citation Format

Share Document