scholarly journals Finite Element Software for Rubber Products Design

2018 ◽  
Vol 3 (1) ◽  
pp. 13-20
Author(s):  
Dávid Huri
Keyword(s):  
Finite Element ◽  
Complex Analysis ◽  
Large Deformations ◽  
Material Behavior ◽  
Nonlinear Material ◽  
Material Models ◽  
Finite Element Software ◽  
Highly Nonlinear ◽  
Wide Range ◽  
Different Types

Automotive rubber products are subjected to large deformations during working conditions, they often contact with other parts and they show highly nonlinear material behavior. Using finite element software for complex analysis of rubber parts can be a good way, although it has to contain special modules. Different types of rubber materials require the curve fitting possibility and the wide range choice of the material models. It is also important to be able to describe the viscoelastic property and the hysteresis. The remeshing possibility can be a useful tool for large deformation and the working circumstances require the contact and self contact ability as well. This article compares some types of the finite element software available on the market based on the above mentioned features.

Coupled Porohyperelastic Mass Transport (PHEXPT) Finite Element Models for Soft Tissues Using ABAQUS

2011 ◽  
Vol 133 (4) ◽  
Author(s):  
Jonathan P. Vande Geest ◽  
B. R. Simon ◽  
Paul H. Rigby ◽  
Tyler P. Newberg
Keyword(s):  
Finite Element ◽  
Mass Transport ◽  
Soft Tissues ◽  
Convective Transport ◽  
Finite Deformations ◽  
Nonlinear Material ◽  
Finite Element Models ◽  
Finite Element Software ◽  
Mobile Species ◽  
Highly Nonlinear

Finite element models (FEMs) including characteristic large deformations in highly nonlinear materials (hyperelasticity and coupled diffusive/convective transport of neutral mobile species) will allow quantitative study of in vivo tissues. Such FEMs will provide basic understanding of normal and pathological tissue responses and lead to optimization of local drug delivery strategies. We present a coupled porohyperelastic mass transport (PHEXPT) finite element approach developed using a commercially available ABAQUS finite element software. The PHEXPT transient simulations are based on sequential solution of the porohyperelastic (PHE) and mass transport (XPT) problems where an Eulerian PHE FEM is coupled to a Lagrangian XPT FEM using a custom-written FORTRAN program. The PHEXPT theoretical background is derived in the context of porous media transport theory and extended to ABAQUS finite element formulations. The essential assumptions needed in order to use ABAQUS are clearly identified in the derivation. Representative benchmark finite element simulations are provided along with analytical solutions (when appropriate). These simulations demonstrate the differences in transient and steady state responses including finite deformations, total stress, fluid pressure, relative fluid, and mobile species flux. A detailed description of important model considerations (e.g., material property functions and jump discontinuities at material interfaces) is also presented in the context of finite deformations. The ABAQUS-based PHEXPT approach enables the use of the available ABAQUS capabilities (interactive FEM mesh generation, finite element libraries, nonlinear material laws, pre- and postprocessing, etc.). PHEXPT FEMs can be used to simulate the transport of a relatively large neutral species (negligible osmotic fluid flux) in highly deformable hydrated soft tissues and tissue-engineered materials.

Finite Element Analysis on Nitinol Medical Applications

2002 ◽  
Author(s):  
Xiao-Yan Gong ◽  
Alan R. Pelton
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Material Behavior ◽  
Nonlinear Material ◽  
Uniaxial Tensile ◽  
Uniaxial Tensile Test ◽  
Element Analysis ◽  
Highly Nonlinear ◽  
Device Applications ◽  
Specific Material

Nitinol, an alloy of about 50% Ni and 50% Ti, is a very unique material. At constant temperature above its Austenite finish (Af) temperature, under uniaxial tensile test, the material is highly nonlinear and capable of large deformation to the ultimate strain on the order of 15%. This material behavior, known as superelasticity, along with its excellent biocompatibility and corrosion resistance, makes Nitinol a perfect material candidate for many medical device applications. However, the nonlinear material response also requires a specific material description to perform the stress analysis. The user developed material subroutine from HKS/West makes the simulation of the Nitinol devices possible. This article presents two case studies of the nonlinear finite element analysis using ABAQUS/Standard and the Nitinol UMAT.

Comparative Study of Two Different Types of Human Mandible Boundary Conditions Used in Finite Element Calculations

2013 ◽  
Vol 436 ◽  
pp. 255-264 ◽  
Author(s):  
Jiří Valášek ◽  
Maxim Jurčenko ◽  
Zdeněk Florian
Keyword(s):  
Boundary Condition ◽  
Finite Element ◽  
Muscle Forces ◽  
Material Characteristic ◽  
Material Models ◽  
3D Cad ◽  
Finite Element Software ◽  
Lower Jaw ◽  
Different Types ◽  
Living Tissues

The aim of the presented work is compare a two different way of prescribing muscles and chewing force boundary condition. First variant of boundary condition consider muscle forces and their direction taken from literatures. Second variant of boundary condition consider muscles modeled as finite elements connecting lower jaw and skull together. At second variant a muscles material characteristic of Young ́s modulus was changed in range from 1e4 MPa to 2,1e5 MPa. Models of living tissues were created on base of CT images and modeled in 3D CAD software SolidWorks. Calculations were computed in the finite element software ANSYS. Material models were considered as homogenous, isotropic and linearly elastic for all parts. First, both variants of boundary condition were analyzed separately and after that, selected variables (as muscle forces and muscle direction scale factors) from both variant were compared together.

Thermal conduction modeling of composites by embedding technique

2021 ◽  
pp. 146442072110375
Author(s):  
Rafael Corrêa Salomão ◽  
Rogério Carrazedo
Keyword(s):  
Finite Element ◽  
Composite Materials ◽  
Degrees Of Freedom ◽  
Complex Analysis ◽  
Numerical Models ◽  
Material Behavior ◽  
Nonlinear Material ◽  
The Finite Element Method ◽  
Embedding Technique ◽  
Materials Modeling

Composite materials are extremely important in several industrial areas and have been thoroughly used to solve many engineering problems. In more recent years, new numerical models and manufacturing processes made interest grow on those materials. This work contributes to the state of the art of composite materials modeling by proposing an embedding technique for thermal problems using the finite element method. The technique relies on rewriting the reinforcement finite element variables according to the composite matrix finite element form functions. By doing so, it is possible to embed the reinforcement element without increasing the total number of degrees of freedom. The embedding method is capable of modeling the phase’s orientation as well as it’s placement. It’s also possible to make use of nonlinear conductive parameters to model nonlinear thermal problems. Numerical examples are described to show the technique’s capability. The numerical results show good agreement with references, as well as reducing the total number of degrees of freedom and being able to model nonlinear material behavior. Such characteristics make the model suitable to perform more complex analysis such as reliability, optimization, multi-physics, among others.

scholarly journals NUMERICAL MODELLING OF THE AIRFRAME DAMAGE GROWTH FOR THE ADHESIVE REPAIR JOINT CALCULATION

2018 ◽  
Vol 21 (3) ◽  
pp. 125-138
Author(s):  
A. A. Fedotov ◽  
A. V. Tsipenko ◽  
A. I. Lebedev
Keyword(s):  
Finite Element ◽  
Crack Growth ◽  
Information Technologies ◽  
Mechanical Response ◽  
Material Behavior ◽  
Nonlinear Material ◽  
Fatigue Properties ◽  
Damage Growth ◽  
Finite Element Software ◽  
Software Packages

In the context of the predicted growth in air transportation, the additional attention will be paid to the organization of the competitive maintenance and repair operations for the commercial airplanes. The implementation of new technological processes for airframe repairs and the application of modern information technologies during the development of the repair procedures can be a significant advantage in the expanding market of post-production support of the commercial air fleet. Airframe adhesive repairs allow using lifting abilities of the materials more intensively, but application of the adhesive joints technology requires more complicated strength calculation procedure. It is advisable to utilize the modern finite element software packages to perform the reliable calculation. The capabilities of these software packages allow obtaining adequate computational results for adhesive repair joint parameters subjected to cyclic loads. This paper is concentrated on application of the finite element methods to simulate the crack growth in isotropic material and on methods for accelerated calculation of the mechanical response of cracked structures. Crack growth simulation is performed based on XFEM methods where the created finite element model is complemented with asymptotic imitation function of crack tip and with discontinuous jump function across the crack surfaces. Fatigue properties of the repair joint are modelled in accordance with direct cyclic approach, where a Fourier series approximation with time integration of the nonlinear material behavior is applied. After that, the result of integration at each point of the load history is used for the prediction of the material fatigue properties degradation at the next step of computation; this allows us to evaluate the material damage growth rate. Based on calculation results, a conclusion was made that the received numerical data match the full-scale test results; the time spent for calculation with the usage of accelerated computational methods was evaluated. 

scholarly journals A Study of Speed of the Boundary Element Method as applied to the Realtime Computational Simulation of Biological Organs

2014 ◽  
Vol 12 (2) ◽  
Author(s):  
Kirana Kumara P
Keyword(s):  
Boundary Element Method ◽  
Boundary Element ◽  
Computational Simulation ◽  
Material Model ◽  
Material Behavior ◽  
Nonlinear Material ◽  
Processing Unit ◽  
Material Models ◽  
Highly Nonlinear ◽  
Element Method

In this work, possibility of simulating biological organs in realtime using the Boundary Element Method (BEM) is investigated. Biological organs are assumed to follow linear elastostatic material behavior, and constant boundary element is the element type used.  First, a Graphics Processing Unit (GPU) is used to speed up the BEM computations to achieve the realtime performance. Next, instead of the GPU, a computer cluster is used.  Results indicate that BEM is fast enough to provide for realtime graphics if biological organs are assumed to follow linear elastostatic material behavior. Although the present work does not conduct any simulation using nonlinear material models, results from using the linear elastostatic material model imply that it would be difficult to obtain realtime performance if highly nonlinear material models that properly characterize biological organs are used. Although the use of BEM for the simulation of biological organs is not new, the results presented in the present study are not found elsewhere in the literature.

APPLICATION OF SYNTHETIC FIBER ROPES TO REDUCE BLAST RESPONSE OF A PORTAL FRAME

2006 ◽  
Vol 06 (04) ◽  
pp. 513-526 ◽  
Author(s):  
M. R. MOTLEY ◽  
R. H. PLAUT
Keyword(s):  
Finite Element ◽  
Large Deformations ◽  
Material Behavior ◽  
Synthetic Fiber ◽  
Plastic Strains ◽  
Finite Element Software ◽  
Stiffness Coefficients ◽  
Blast Response ◽  
Portal Frame ◽  
Relationship Of

A steel portal frame subjected to an external blast is analyzed. The use of diagonal synthetic fiber ropes to brace the frame is studied. The force-elongation relationship of the ropes when in tension is modeled either as a bilinear function with initial slackness, or a power law based on tests. The effect of the ropes in reducing deflections and plastic strains is determined using the finite element software ABAQUS/Explicit. Inclusion of the influence of strain-rate on the material behavior of the frame is important. Several blast magnitudes and rope stiffness coefficients are considered. Snap loads occur in the ropes if the blast is sufficiently large. Deformations and strains may be reduced significantly by the ropes, and failure may be prevented.

A Calculation Method of Magnetic Anomaly Field Distribution of Ellipsoid with Arbitrary Posture

2021 ◽  
Author(s):  
Song-tong Han ◽  
Bo Zhang ◽  
Xiao-li Rong ◽  
Lei-xiang Bian ◽  
Guo-kai Zhang ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Finite Element ◽  
Magnetic Anomaly ◽  
Field Distribution ◽  
Calculation Method ◽  
Gravity Potential ◽  
Anomaly Field ◽  
Finite Element Software ◽  
Wide Range ◽  
Distribution Equation

The ellipsoidal magnetization model has a wide range of application scenarios. For example, in aviation magnetic field prospecting, mineral prospecting, seabed prospecting, and UXO (unexploded ordnance) detection. However, because the existing ellipsoid magnetization formula is relatively complicated, the detection model is usually replaced by a dipole. Such a model increases the error probability and poses a significant challenge for subsequent imaging and pattern recognition. Based on the distribution of ellipsoid gravity potential and magnetic potential, the magnetic anomaly field distribution equation generated by the ellipsoid is deduced by changing the aspect ratio, making the ellipsoid equivalent to a sphere. The result of formula derivation shows that the two magnetic anomaly fields are consistent. This paper uses COMSOL finite element software to model UXO, ellipsoids, and spheres and analyzes magnetic anomalies. The conclusion shows that the ellipsoid model can completely replace the UXO model when the error range of 1nT is satisfied. Finally, we established two sets of ellipsoids and calculated the magnetic anomalous field distributions on different planes using deduction formulas and finite element software. We compared the experimental results and found that the relative error of the two sets of data was within [Formula: see text]‰. Error analysis found that the error distribution is standardized and conforms to the normal distribution. The above mathematical analysis and finite element simulation prove that the calculation method is simple and reliable and provides a magnetic field distribution equation for subsequent UXO inversion.

Response surface method strategies coupled with NLFEA for structural reliability analysis of prestressed bridges

2021 ◽  
Author(s):  
Silvia J. Sarmiento Nova ◽  
Jaime Gonzalez-Libreros ◽  
Gabriel Sas ◽  
Rafael A. Sanabria Díaz ◽  
Maria C. A. Texeira da Silva ◽  
...  
Keyword(s):  
Reliability Analysis ◽  
Response Surface ◽  
Response Surface Method ◽  
Structural Reliability ◽  
Limit State ◽  
Material Behavior ◽  
Nonlinear Material ◽  
State Function ◽  
Surface Method ◽  
Highly Nonlinear

<p>The Response Surface Method (RSM) has become an essential tool to solve structural reliability problems due to its accuracy, efficacy, and facility for coupling with Nonlinear Finite Element Analysis (NLFEA). In this paper, some strategies to improve the RSM efficacy without compromising its accuracy are tested. Initially, each strategy is implemented to assess the safety level of a highly nonlinear explicit limit state function. The strategy with the best results is then identified and used to carry out a reliability analysis of a prestressed concrete bridge, considering the nonlinear material behavior through NLFEA simulation. The calculated value of &#120573; is compared with the target value established in Eurocode for ULS. The results showed how RSM can be a practical methodology and how the improvements presented can reduce the computational cost of a traditional RSM giving a good alternative to simulation methods such as Monte Carlo.</p>

scholarly journals Key considerations for finite element modelling of the residuum–prosthetic socket interface

2020 ◽  
pp. 030936462096778
Author(s):  
JW Steer ◽  
PR Worsley ◽  
M Browne ◽  
Alex Dickinson
Keyword(s):  
Finite Element ◽  
Soft Tissue ◽  
Finite Element Modelling ◽  
Soft Tissues ◽  
Shear Stresses ◽  
Material Models ◽  
Element Modelling ◽  
Prosthetic Socket ◽  
Highly Nonlinear ◽  
Socket Interface

Background: Finite element modelling has long been proposed to support prosthetic socket design. However, there is minimal detail in the literature to inform practice in developing and interpreting these complex, highly nonlinear models. Objectives: To identify best practice recommendations for finite element modelling of lower limb prosthetics, considering key modelling approaches and inputs. Study design: Computational modelling. Methods: This study developed a parametric finite element model using magnetic resonance imaging data from a person with transtibial amputation. Comparative analyses were performed considering socket loading methods, socket–residuum interface parameters and soft tissue material models from the literature, to quantify their effect on the residuum’s biomechanical response to a range of parameterised socket designs. Results: These variables had a marked impact on the finite element model’s predictions for limb–socket interface pressure and soft tissue shear distribution. Conclusions: All modelling decisions should be justified biomechanically and clinically. In order to represent the prosthetic loading scenario in silico, researchers should (1) consider the effects of donning and interface friction to capture the generated soft tissue shear stresses, (2) use representative stiffness hyperelastic material models for soft tissues when using strain to predict injury and (3) interrogate models comparatively, against a clinically-used control.

Sign in / Sign up

Export Citation Format

Share Document