A STUDY ON THE DESIGNING AND CONSTRUCTING TAMA CEMETERY —THE PROCESS OF DESIGN CHANGES IN A PHASED CONSTRUCTION—

2021 ◽  
Vol 77 (1) ◽  
pp. 33-49
Author(s):  
Katsufumi OWADA ◽  
Ushio SAITO
Keyword(s):  
Design Changes

Parallel Computing for Tire Simulations

2011 ◽  
Vol 39 (3) ◽  
pp. 193-209 ◽  
Author(s):  
H. Surendranath ◽  
M. Dunbar
Keyword(s):  
High Performance ◽  
Effective Means ◽  
Cost Effective ◽  
Turnaround Time ◽  
Careful Consideration ◽  
Rolling Contact ◽  
Element Analysis ◽  
Parallel Solvers ◽  
Design Changes ◽  
Highly Nonlinear

Abstract Over the last few decades, finite element analysis has become an integral part of the overall tire design process. Engineers need to perform a number of different simulations to evaluate new designs and study the effect of proposed design changes. However, tires pose formidable simulation challenges due to the presence of highly nonlinear rubber compounds, embedded reinforcements, complex tread geometries, rolling contact, and large deformations. Accurate simulation requires careful consideration of these factors, resulting in the extensive turnaround time, often times prolonging the design cycle. Therefore, it is extremely critical to explore means to reduce the turnaround time while producing reliable results. Compute clusters have recently become a cost effective means to perform high performance computing (HPC). Distributed memory parallel solvers designed to take advantage of compute clusters have become increasingly popular. In this paper, we examine the use of HPC for various tire simulations and demonstrate how it can significantly reduce simulation turnaround time. Abaqus/Standard is used for routine tire simulations like footprint and steady state rolling. Abaqus/Explicit is used for transient rolling and hydroplaning simulations. The run times and scaling data corresponding to models of various sizes and complexity are presented.

INFLUENCE OF DESIGN CHANGES IN PNEUMATIC SEEDING DEVICES ON THE QUALITY INDICATORS OF SEEDING

2020 ◽  
pp. 67-70
Author(s):  
B.KH. AKHALAYA ◽  
◽  
YU.KH SHOGENOV ◽  
S.I. STAROVOITOV ◽  
◽  
...  
Keyword(s):  
Quality Indicators ◽  
Design Changes

Reed bed treatment systems for sewage treatment in the United Kingdom - the first 10 years’ experience

1995 ◽  
Vol 32 (3) ◽  
pp. 317-327 ◽  
Author(s):  
P. Cooper ◽  
B. Green
Keyword(s):  
Root Zone ◽  
Sewage Treatment ◽  
Horizontal Flow ◽  
Water Industry ◽  
Soil Systems ◽  
Design Changes ◽  
Flow Systems ◽  
Group A ◽  
Reed Bed ◽  
The Uk

The UK Water Industry first became interested in Reed Bed Treatment Systems for sewage in 1985. Early problems were experienced with soil-based horizontal-flow systems of the Root Zone type. The problems were overcome by national co-ordination of a development programme and international co-operation by an EC Expert Contact Group. A number of different types of systems have now been developed and the systems are now being accepted. The paper reviews the development of these systems for secondary and tertiary treatment and nitrification and mentions development of systems for other forms of treatment. The design changes made to overcome the problems are described. These include the gradual move to the use of gravel-based systems because of the difficulty experienced with over-land flow in the soil systems. The sizing of the systems is described together with performance data for the original horizontal-flow and the more recently developed vertical-flow systems. Treatment at secondary and tertiary levels is illustrated and the potential for nitrification. Early problems with reed growth have been overcome by planting with port-grown seedlings. After 10 years the process is generally accepted by the Water Industry as an appropriate treatment for villages and there are now between 200 and 300 systems in operation.

scholarly journals 115 The Beef Industry in a Post-Pandemic World

2021 ◽  
Vol 99 (Supplement_1) ◽  
pp. 40-40
Author(s):  
Derrell S Peel
Keyword(s):  
Supply Chains ◽  
Inventory Management ◽  
Service Sector ◽  
Food Service ◽  
Consumer Products ◽  
Labor Management ◽  
Beef Industry ◽  
Design Changes ◽  
The Face ◽  
Retail Grocery

Abstract The onset of the COVID-19 pandemic in 2020 caused unprecedented shocks and disruptions in the cattle and beef industry. The shutdown of food service in March 2020 caused an unparalleled stacking of food demand on the retail grocery sector. The rigidity and specialized nature of food service and retail grocery supply chains, compounded by a surge in consumer demand at retail grocery, resulted in temporary shortages of meat in other consumer products in supermarkets. The food service sector recovered somewhat over many weeks but remained diminished through the balance of 2020 and beyond. In April 2020, COVID-19 infections affected the labor forces of many meat packing and processing facilities and resulted in significant reductions in beef packing and further processing for eight to twelve weeks. This caused additional product shortages in retail grocery and food service sectors. These impacts have raised many questions about how the beef industry might adapt to be more resilient in the face of such profound disruptions. Possible changes include more use of multi-purpose facilities (less specialized for food service or retail grocery supply chains); design changes in new plants and retrofitting existing facilities to reduce human health impacts; changes in labor management; changes in inventory management; and changes in business supply chain management and risk assessment practices.

scholarly journals Radial Turbine Design for Solar Chimney Power Plants

Energies ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 674
Author(s):  
Paul Caicedo ◽  
David Wood ◽  
Craig Johansen
Keyword(s):  
Power Plants ◽  
Reference Frames ◽  
Three Dimensional ◽  
Discrete Ordinates ◽  
Large Area ◽  
Solar Chimney ◽  
Cfd Simulations ◽  
Radial Turbine ◽  
Design Changes ◽  
Turbine Design

Solar chimney power plants (SCPPs) collect air heated over a large area on the ground and exhaust it through a turbine or turbines located near the base of a tall chimney to produce renewable electricity. SCPP design in practice is likely to be specific to the site and of variable size, both of which require a purpose-built turbine. If SCPP turbines cannot be mass produced, unlike wind turbines, for example, they should be as cheap as possible to manufacture as their design changes. It is argued that a radial inflow turbine with blades made from metal sheets, or similar material, is likely to achieve this objective. This turbine type has not previously been considered for SCPPs. This article presents the design of a radial turbine to be placed hypothetically at the bottom of the Manzanares SCPP, the only large prototype to be built. Three-dimensional computational fluid dynamics (CFD) simulations were used to assess the turbine’s performance when installed in the SCPP. Multiple reference frames with the renormalization group k-ε turbulence model, and a discrete ordinates non-gray radiation model were used in the CFD simulations. Three radial turbines were designed and simulated. The largest power output was 77.7 kW at a shaft speed of 15 rpm for a solar radiation of 850 W/m2 which exceeds by more than 40 kW the original axial turbine used in Manzanares. Further, the efficiency of this turbine matches the highest efficiency of competing turbine designs in the literature.

scholarly journals Intrinsic Value and Perceived Essentialism of Culture Heritage Sites as Tools for Planning Interventions

2021 ◽  
Vol 13 (9) ◽  
pp. 5078
Author(s):  
Magdalena Roszczynska-Kurasinska ◽  
Anna Domaradzka ◽  
Anna Wnuk ◽  
Tomasz Oleksy
Keyword(s):  
Cultural Heritage ◽  
Local Community ◽  
Social Acceptance ◽  
Intrinsic Value ◽  
Community Members ◽  
Online Questionnaire ◽  
Heritage Sites ◽  
Design Changes ◽  
Culture Heritage ◽  
Response To Change

In order to remain alive and relevant, cultural heritage sites have to react and adapt to changing context in a coherent manner, i.e., in a way that is in line with the memory and identity of the place. The incoherent changes, i.e., the transformations that according to the local community do not agree with a character of a place, can be destructive for the long-term vitality of urban cultural heritage. In this study, we test which factors influence social acceptance of different alternations within the context of urban historical gardens that might, in turn, ensure the resilience of the place. Our study focuses on the intangible qualities of the place measured by intrinsic value, perceived essentialism and anti-essentialism as important predictors shaping the response to change. The correlational study was conducted using an online questionnaire designed to empirically grasp intangible qualities of cultural heritage sites. Five hundred twenty-nine responses were included in the analysis. The study shows that perceived historic value, inherent value (uniqueness and importance of the place) and (anti-)essentialist character of a place capture the differences between parks well and enables the finding of interventions that are coherent with a site’s genius loci. Measuring intangible qualities of urban gardens can help to design changes that find higher approval among local community members and users of the site. We discuss how the analysis of an intrinsic value and essentialism allows for planning better spatial interventions that align with the human-centered approach to urban development.

scholarly journals Using Design Thinking to Improve Cook Stoves Development in Mexico

2021 ◽  
Vol 13 (7) ◽  
pp. 3843
Author(s):  
Elena Ferriz Bosque ◽  
Luisa M. Muneta ◽  
Gregorio Romero Rey ◽  
Berta Suarez
Keyword(s):  
Developing Countries ◽  
Design Thinking ◽  
Combustion Efficiency ◽  
Residential Energy ◽  
Traditional Use ◽  
Design Changes ◽  
Need To Evaluate ◽  
Cook Stoves ◽  
Design Options ◽  
Theoretical Analyses

A traditional use of bioenergy is the main source of residential energy in developing countries, essentially using firewood to cook, boil water or heating affecting people in developing countries. Improved kitchens are more efficient and less polluting, and there is a need to evaluate different design options to facilitate their adoption. There are different types of very economical improved cook stoves with high combustion efficiency. In Mexico, multiple projects about cook stoves have been carried out, the root of this study being one of them, the Patsari cook stoves. The goal of this project was to modify previous designs to align with the habits and traditions. This study shows the importance of including the participation of the users in the design of the portable model of the Patsari cook stoves, applying Design Thinking methodology. Many designs or design changes have been done on cook stoves by different researchers, but users do not adapt to them. This article, through a field study, shows the importance of theoretical analyses along with user experiences to facilitate the adoption of these improves cook stoves and ensure their success.

Improving Sustainability of Housing in Ghana through Energy Efficient Climate Control Strategies

2012 ◽  
Vol 608-609 ◽  
pp. 1698-1704
Author(s):  
Abdul Manan Dauda ◽  
Hui Gao
Keyword(s):  
Natural Ventilation ◽  
Energy Savings ◽  
Control Strategies ◽  
Internal Heat ◽  
Climate Control ◽  
Housing Design ◽  
Artificial Lighting ◽  
Testing Procedures ◽  
Mass Housing ◽  
Design Changes

This paper aims at explaining testing procedures used to evaluate the potential of natural ventilation and daylighting applications to passive design of housing in Ghana. The objectives of research were to reduce energy costs and increase the sustainability of housing. From the results of these experiments actual and potential designs are illustrated and discussed. Mass housing results in multi-storey buildings which require substantial artificial lighting and ventilation. Also, with the increasing usage of glass for windows and doors in Ghana, even the shaded depths of buildings require additional daylight usually resulting in more energy consumption. By supplementing the internal lighting levels with daylight, reducing the internal heat load by shading windows to direct radiation and the utilization of natural ventilation over air conditioning where possible, significant energy savings are could be achieved. The research proposes mass housing design changes such as: delivering daylight above the suspended ceiling into the depths of the building by horizontal light pipes and natural ventilation, utilizing stack effect and wind siphonage, etc.

Sign in / Sign up

Export Citation Format

Share Document