scholarly journals Influence of Shear Wall on Seismic Response of a Structure

2021 ◽  
Vol 9 (9) ◽  
pp. 1054-1060
Author(s):  
Siddhesh Bisane
Keyword(s):  
Structural Analysis ◽  
Shear Walls ◽  
Shear Wall ◽  
Main Concern ◽  
Structural Members ◽  
Lateral Loads ◽  
Comprehensive Understanding ◽  
High Rise ◽  
Story Drift ◽  
Wall Following

Abstract: Structural analysis is the science of determining the effects of different loads on structures. Structural stability and stiffness are a main concern in any high-rise structures. Shear walls are structural members that are mainly responsible for resisting lateral loads predominant on structures. They are mainly responsible to increase the stiffness, reduce story drift and displacement. In order to have a comprehensive understanding about the contribution of shear wall, following research is carried out. This research involves comparing two G+16 structures; one without a shear wall and one with it. The structure has 4 bays of 3m each along X direction and Z direction. In this, we will see how shear wall resists lateral sway and reduces story drift and increases stiffness. As the height increases, the shear wall absorbs more lateral load than the frame. The software to be used for analysis is STAADPro. Keywords: STAADPro, Stiffness, storey displacement, storey drift.

scholarly journals Evaluation of Steel Plate Shear Wall Performance with Different Sections and Arrangements of Stiffeners and its Effect on Project Management during Construction and Improvement of the Building

2021 ◽  
Vol 11 (1) ◽  
pp. 6043-6063
Author(s):  
Ali Jafarian ◽  
Seyed Babak Jafarian
Keyword(s):  
Steel Plate ◽  
Nonlinear Dynamic Analysis ◽  
Shear Walls ◽  
Shear Wall ◽  
Economic Benefits ◽  
Lateral Loads ◽  
Steel Plate Shear Wall ◽  
High Rise ◽  
Earthquake Force ◽  
The Future

Considering the increase in the current construction process and the future needs of Iran, the necessity to use high-rise buildings for reduction in urbanization costs and optimal use of land will be inevitable in the future. The performance of steel plate shear wall system as a modern global system, which has an effective application in high-rise buildings and also brings economic benefits compared to previous systems, is evaluated in this study. Steel Plate Shear Walls (SPSW) are a new type of system resistant to wind and earthquake lateral loads, which dates back to the 1970s. In this research, eight samples of shear wall with various stiffening arrangements and sections with ST37 and ST52 alloys are modeled. To evaluate the nonlinear dynamic analysis, the samples are subjected to the San Fernando earthquake force and are modeled and analyzed by ABAQUS software based on the finite element theory. The results of analyzing the samples indicate better performance of the system with stiffener in both vertical and horizontal directions. Also, the use of sections with ST52 alloy has improved the performance of the shear wall by approximately 40%.

scholarly journals COMPUTATIONAL ASSESSMENT FOR SEISMOLOGICAL PERFORMANCE OF MULTISTOREY FLAT SLAB STRUCTURES WITH (AT SPECIFIC POSITIONS) AND WITHOUT SHEAR WALLS

2021 ◽  
Vol 6 (3) ◽  
Author(s):  
Shaikh Jafar Shaikh Ismail ◽  
L. G. Patil
Keyword(s):  
Shear Walls ◽  
Shear Wall ◽  
Lateral Stiffness ◽  
Lateral Loads ◽  
Dead Load ◽  
Flat Slab ◽  
Variable Parameters ◽  
High Rise ◽  
Main Factors ◽  
Seismic Investigation

In present era, there is a huge scarcity of vacant land led to the development of the high rise structures. For the construction of high rise buildings, normal R.C.C. system is not suitable. These problems can overcome by using flat slab system along with shear wall arrangements. It is very essential that the shear wall position should be appropriate in structure so as to achieve the lateral stiffness and solid structure against lateral loads. In this work, two main factors i.e. with drop panels and without drop panels have been considered for 12 storey structures. In each factor 5 models of various locations of shear wall is taken for consideration. For stabilization of variable parameters such as storey displacement, storey stiffness and storey shear etc the seismic investigation & design of structures had carried out in software ETABS. After performing seismic investigation & design of all the structures, result shows that if we provide shear wall at incorrect or inappropriate locations then it will only increase the dead load and cost of the structure. So the final outcomes we have achieved is to provide shear walls at desired position where lateral loads are more predominantly acting on the structures

scholarly journals Effect of Location of Shear wall on Torsional Performance of Symmetric and Asymmetric High Rise Building

2021 ◽  
Vol 9 (VI) ◽  
pp. 5237-5243
Author(s):  
Hridya. K
Keyword(s):  
Shear Walls ◽  
Shear Wall ◽  
Lateral Loads ◽  
Base Shear ◽  
Flat Slab ◽  
High Rise ◽  
High Rise Building ◽  
Wide Range ◽  
The Cost ◽  
Post Tensioned

Torsion force is a load that is a applied to a building through torque. The torque applied creates a shear stress. If a torsion force is large enough, it can cause a building to undergo a twisting action. The main aim of the project is to study the effect of location of shear wall on torsional performance of symmetric and asymmetric high-rise building ,post tensioned slabs are being used in the construction of building hence the thesis also analyze these post tensioned slab structures by changing shear wall configuration. Post tensioned slab structures have weak resistance to lateral loads. so to provide stiffness to structures against lateral forces shear walls are used. A study of 30 storey building in zone III, is considered and determine various parameters like base shear, storey drift, and storey displacement.post-tensioning is a mature technology as it provide efficient, economic and elegant structural solutions for a wide range of applications. Post-tensioned flat slab could be a better option compared to RCC flat slab, in respect of the cost of project and time of construction. ETABS 2017 software is used for the analysis.

scholarly journals Parametric Study of Buildings with and Without Shear Walls for Seismic Performance

2020 ◽  
Author(s):  
P.N. Pagare ◽  
P. R. Bhosale ◽  
A.P. Birar ◽  
V.D. Hayatnagarkar ◽  
D.C. Sawant
Keyword(s):  
Shear Walls ◽  
Shear Wall ◽  
Frame Structure ◽  
Dual Frame ◽  
Lateral Loads ◽  
Structural System ◽  
Soft Storey ◽  
High Rise ◽  
Seismic Shear ◽  
Earthquake Load

Shear walls are structural systems which provide stability to structures from lateral loads like wind, seismic loads. As shear wall resist major portions of lateral loads in the lowest portions of the buildings and the frame supports the lateral loads in the upper portions of the building which is suited for soft storey high rise building. The properties of these seismic shear walls dominate the response of the building and therefore, it is important to evaluate the seismic response of the walls appropriately. In this present study, main focus is to determine the solution for shear walls behavior in multi-storey building. Effectiveness of shear walls has been studied with the help of six different models. Model one is bare frame structural system, model two is dual frame structural system and model three is a complete shear wall structural system with internal walls in y-direction and model four is a similar model having internal shear walls in x-direction, model five is again a dual frame having columns at exterior and shear walls in interior placed in y-direction and model six is also an dual frame structure having columns at exterior and shear walls at interior placed in x-direction. An earthquake load is applied to a building of G+15 stories located in zone III, type of soil II and various other factors are considered. Parameters like displacement and storey drift are calculated in all the cases replacing column with shear walls and their locations.

scholarly journals A Comparative Study on Shear Wall Concept in Accordance to its Seismic Behavior

2018 ◽  
Vol 7 (4.5) ◽  
pp. 182
Author(s):  
Deepna U ◽  
Arjun S Menon ◽  
S Balamurugan
Keyword(s):  
Seismic Performance ◽  
Steel Plate ◽  
Shear Walls ◽  
Shear Wall ◽  
Lateral Loads ◽  
Steel Plate Shear Wall ◽  
Composite Shear Wall ◽  
Story Drift ◽  
Comparison Of The Results ◽  
Composite Shear

The consequences of lateral loads like earthquake loads, wind loads and blast forces are achieving utmost concern nowadays. Imparting sufficient strength and stability in counter to the lateral loads is one of the major challenges faced by every designer. Therefore Proper understanding of the Seismic performance of different types of shear walls is necessary for structural engineers so as to safeguard the structure against lateral loads. The present paper describes the comparison of the seismic performance of high rise buildings and optimizing the thickness of RCC shear wall, Steel Plate Shear Wall (SPSW) and composite shear wall for (G+20) stories. The design and analysis of the  building with RCC shear wall, steel plate shear wall and composite shear wall is carried out using software ETABS. Effect of varying thickness of shear panels and comparison of the results of story drift and story shear is presented.  

scholarly journals Model Analysis and Optimization of BIM Technology in High-rise Shear Wall Residential Structure

2019 ◽  
Vol 267 ◽  
pp. 02001
Author(s):  
Liangli Xiao ◽  
Yan Liu ◽  
Zhuang Du ◽  
Zhao Yang ◽  
Kai Xu
Keyword(s):  
Structural Analysis ◽  
Collaborative Design ◽  
Structural Model ◽  
Structural Information ◽  
Shear Wall ◽  
Structure Design ◽  
Secondary Development ◽  
Optimized Design ◽  
Analysis Model ◽  
High Rise

This study combines specific high-rise shear wall residential projects with the Revit to demonstrate BIM application processes. The use of R-Star CAD may help to realize the link barrier of the building information model and the structural analysis software PKPM. Sequentially, the information supplement of the structural analysis model is completed by extracting the structural information with the Revit secondary development. By the collaborative design platform based on BIM technology, the paper examines the collision check of structural model, conducts collision analysis on other professional models and modifies the design scheme for conflict points. After the statistics of material usage, an optimized design is proposed. The findings of this paper could contribute to provide some reference for the specific application of BIM in structural design and realize the application of BIM technology in the process of building structure design.

scholarly journals Analisis Pengaruh Lokasi Dinding Geser Terhadap Pergeseran Lateral Bangunan Bertingkat Beton Bertulang 5 Lantai

2021 ◽  
Vol 4 (1) ◽  
pp. 16
Author(s):  
Leonardus Setia Budi Wibowo ◽  
Dermawan Zebua
Keyword(s):  
Lateral Displacement ◽  
Shear Walls ◽  
Seismic Loading ◽  
Shear Wall ◽  
Structural System ◽  
Earthquake Force ◽  
Earthquake Resistant ◽  
Story Drift ◽  
Frame System ◽  
Rc Shear Wall

Indonesia is one of the countries in the earthquake region. Therefore, it is necessary to build earthquake-resistant buildings to reduce the risk of material and life losses. Reinforced Concrete (RC) shear walls is one of effective structure element to resist earthquake forces. Applying RC shear wall can effectively reduce the displacement and story-drift of the structure. This research aims to study the effect of shear wall location in symmetric medium-rise building due to seismic loading. The symmetric medium rise-building is analyzed for earthquake force by considering two types of structural system. i.e. Frame system and Dual system. First model is open frame structural system and other three models are dual type structural system. The frame with shear walls at core and centrally placed at exterior frames showed significant reduction more than 80% lateral displacement at the top of structure.

Analysis of Effective Location of Shear Wall for High Rise Building with U – Configuration

2021 ◽  
Vol 23 (2) ◽  
pp. 167-176
Author(s):  
Sekar Mentari ◽  
Rosi Nursani
Keyword(s):  
Lateral Displacement ◽  
Center Of Mass ◽  
Shear Walls ◽  
Shear Wall ◽  
Rotational Axis ◽  
Moment Frame ◽  
Earthquake Loads ◽  
High Rise ◽  
Live Loads ◽  
Special Moment Frame

Indonesia is one of the countries that is prone to earthquakes. In addition to the dead loads, superimposed dead loads, and live loads, the design of buildings in Indonesia must be concerned with earthquake loads. Installing shear walls in the building structure as the Special Moment Frame Dual System is one of a solution to withstand earthquake loads. However, the location of shear walls must be considered, especially in buildings with horizontal irregularities. This study aims to determine the optimum location of the shear walls in a 10-storey building that has U-configuration with dynamic earthquake loads. This research is a numerical simulation ran by modelling the structure with software. To know the effect of the shear wall’s location on a building, several variations of the shear wall configuration with different positions have been conducted. It can be seen the lateral displacement of each floor and the shear force are the response structure to withstand the dynamic earthquake loads. Shear walls that are located close to the center of mass of the building are the optimum variation because the position of the shear wall is the closest to the core area of the building, which is the rotational axis of the building.

scholarly journals EFFICIENT THREE-DIMENSIONAL MODELLING OF HIGH-RISE BUILDING STRUCTURES

2013 ◽  
Vol 19 (6) ◽  
pp. 811-822 ◽  
Author(s):  
Mohammed Jameel ◽  
A. B. M. Saiful Islam ◽  
Mohammed Khaleel ◽  
Aslam Amirahmad
Keyword(s):  
Three Dimensional ◽  
Shear Walls ◽  
Shear Wall ◽  
Frame Structure ◽  
Building Structures ◽  
Structural Behaviour ◽  
High Rise ◽  
Structural Responses ◽  
Wall Openings ◽  
Storey Building

A multi-storey building is habitually modelled as a frame structure which neglects the shear wall/slab openings along with the inclusion of staircases. Furthermore, the structural strength provided by shear walls and slabs is not precisely incorporated. With increasing building height, the effect of lateral loads on a high-rise structure increases substantially. Inclusion of shear walls and slabs with the frame leads to improved lateral stiffness. Besides, their openings may play imperative role in the structural behaviour of such buildings. In this study, 61 multi-storey building configurations have been modelled. Corresponding analyses are performed to cope with the influence of shear walls, slabs, wall openings, masonry walls and staircases in addition to frame modelling. The finite element approach is used in modelling and analysis. Structural responses in each elemental combination are evaluated through equivalent static and free vibration analyses. The assessment reveals that inclusion of only slab components with frame modelling contributes trivial improvement on structural performance. Conversely, the presence of shear wall slabs with frame improves the performance noticeably. Increasing wall openings decreases the structural responses. Furthermore, it is not recommended to model staircases in addition to frame–slab–shear wall modelling, unless the effect of wall openings and slab openings is adequately considered.

Experimental Study on Behavior of Shear Walls Built with Precast Two-way Hollow Slabs for Different Axial-Load Ratios

2013 ◽  
Vol 351-352 ◽  
pp. 833-837
Author(s):  
Ji Liang Liu ◽  
Hui Chen Cui ◽  
Ming Jin Chu ◽  
Jian Qun Hou
Keyword(s):  
Shear Failure ◽  
Precast Concrete ◽  
Failure Process ◽  
Compressive Load ◽  
Shear Walls ◽  
Shear Wall ◽  
Shear Capacity ◽  
Lateral Loads ◽  
Compression Load ◽  
New Type

The shear wall built with precast two-way hollow slab is an innovated precast concrete shear wall suitable for housing industrialization. Two shear walls built with precast two-way hollow slabs were tested pseudo-statically under low cyclic lateral loads to acquire their failure process and modes. The effect of the axial compression load was investigated. The study proved that vertical cracks along the vertical holes of the new type shear wall have been appeared to avoid brittle shear failure, and the shear wall developed integral section wall to walls-columns combination. As the results, the shear walls have the adequate deformability. The test results showed that with the increase of axial compressive ratio, crack development has been limited and the energy dissipation capacity has been improved. It also can be found that with the increase of the axial compressive load, shear capacity of the new type shear walls have been improved.

Sign in / Sign up

Export Citation Format

Share Document