scholarly journals Comparison of Seismic Performance of RCC Normal Structure, Structure with Shear Wall and Structure with Friction Damper

2021 ◽  
Vol 9 (9) ◽  
pp. 2122-2123
Author(s):  
Asrarul Haq
Keyword(s):  
Urban Areas ◽  
Response Spectrum ◽  
Three Dimensional ◽  
Shear Walls ◽  
Building Design ◽  
Normal Structure ◽  
Shear Wall ◽  
Friction Damper ◽  
High Rise ◽  
As Stress

Abstract: There are several natural calamities, including flooding. worst natural disaster – quake, drought, tornado, hurricanes, and earthquake are the most devastating. Since it leaves a trail of injuries and financial losses fear-inducing behaviors. Implementation is necessary When it comes to earthquake codes in building design, earthquakes are like a wake a wake-up call is made. Urban areas in India are seeing a growth in the popularity of medium-rise as well as high rise R.C.-framed apartment complexes with storey counts ranging from 8 to 10 and even greater than 20. R.C. framed buildings of these heights are equipped with shear walls to resist lateral loads. Thus, it's important to understand how they affect storey drift and stiffness, as well as shear and moments, as well as stress within the shear walls. In order to determine the strength of the building's shear wall, a three-dimensional analysis is performed by Response spectrum. In this study we will be using a shear wall on one structure and friction dampers on another, we will create and analyses a 30-story high-rise structure and compare the results based on the parameters listed above, by using E-tabs software. Keywords: E-tabs, Response spectrum, Friction damper, Shear wall, Earthquake

scholarly journals EFFICIENT THREE-DIMENSIONAL MODELLING OF HIGH-RISE BUILDING STRUCTURES

2013 ◽  
Vol 19 (6) ◽  
pp. 811-822 ◽  
Author(s):  
Mohammed Jameel ◽  
A. B. M. Saiful Islam ◽  
Mohammed Khaleel ◽  
Aslam Amirahmad
Keyword(s):  
Three Dimensional ◽  
Shear Walls ◽  
Shear Wall ◽  
Frame Structure ◽  
Building Structures ◽  
Structural Behaviour ◽  
High Rise ◽  
Structural Responses ◽  
Wall Openings ◽  
Storey Building

A multi-storey building is habitually modelled as a frame structure which neglects the shear wall/slab openings along with the inclusion of staircases. Furthermore, the structural strength provided by shear walls and slabs is not precisely incorporated. With increasing building height, the effect of lateral loads on a high-rise structure increases substantially. Inclusion of shear walls and slabs with the frame leads to improved lateral stiffness. Besides, their openings may play imperative role in the structural behaviour of such buildings. In this study, 61 multi-storey building configurations have been modelled. Corresponding analyses are performed to cope with the influence of shear walls, slabs, wall openings, masonry walls and staircases in addition to frame modelling. The finite element approach is used in modelling and analysis. Structural responses in each elemental combination are evaluated through equivalent static and free vibration analyses. The assessment reveals that inclusion of only slab components with frame modelling contributes trivial improvement on structural performance. Conversely, the presence of shear wall slabs with frame improves the performance noticeably. Increasing wall openings decreases the structural responses. Furthermore, it is not recommended to model staircases in addition to frame–slab–shear wall modelling, unless the effect of wall openings and slab openings is adequately considered.

scholarly journals Response analysis of a multi-story building structure with a variety of horizontal irregularities and shear wall geometries

2021 ◽  
Vol 933 (1) ◽  
pp. 012008
Author(s):  
A H Prathama ◽  
M Teguh ◽  
F Saleh
Keyword(s):  
Urban Areas ◽  
Response Spectrum ◽  
Structural Models ◽  
Shear Walls ◽  
Shear Wall ◽  
Response Analysis ◽  
Base Shear ◽  
Drift Ratio ◽  
Story Drift ◽  
Story Building

Abstract The growing growth of human activities has led to changes in housing patterns in urban areas. The land crisis in urban areas has made land prices uneconomical, so buildings are designed vertically. One solution to resist earthquakes in multi-story buildings is to add a shear wall structure with the proper profile and layout. Shear wall designs with variations influence the base shear, drift ratio, lateral deflection, and story drift patterns. This study presents the structural response comparison of buildings against variations in the profile and layout of shear walls subjected to earthquake loads. Force Based Design method utilizing the response spectrum approach was adopted in the analysis and carried out using SAP200. Six structural models comprise a frame without shear walls, three L-profile shear walls, two I-profile (straight) shear walls. The simulation results of the overall structural models show that the profile and layout configuration of shear walls in the frame structure of a multi-story building correlates directly to the performance of base shear, drift ratio, and story drift with relatively comparative conditions.

The Behaviour of High-Rise Building with or without Shear Wall under Different Earthquakes

CONSTRUCTION ◽  
2021 ◽  
Vol 1 (2) ◽  
pp. 93-101
Author(s):  
Saffuan Wan Ahmad ◽  
Muhammad Aimran Amzar Kamarudin ◽  
Wan Aniq Ridhwan Wan Ariffin
Keyword(s):  
Seismic Analysis ◽  
Response Spectrum ◽  
Time History ◽  
Shear Walls ◽  
Shear Wall ◽  
Seismic Action ◽  
Base Shear ◽  
Soft Story ◽  
High Rise ◽  
The One

On the 5th June 2015, an earthquake hit Ranau, Sabah with a magnitude of 6.0 that caused 18 casualties and several injuries are one of the examples that show Malaysia is not safe from any seismic event. Most of the structure in Malaysia was designed not to include seismic action.  Furthermore, an area that has a high density of population such as in the central region (Klang valley) and several main cities in Malaysia has less available land to build landed housing and uses high-rise apartments as an alternative. High-rise buildings that are normally having problems with soft story mechanisms and plan irregularity which could lead to severe damage when earthquakes happen. This study aims to observe the response of high-rise buildings when under different earthquakes in the presence of shear walls. To achieve this objective two models were modelled and analyzed by using ETABS software, the one with a shear wall and the one with no shear wall. The methods used in this study were the response spectrum method and time-history analysis. In the end, the parameters observed were base shear, story stiffness, story drift, and story displacement. The observations highlighted that the effect of earthquake intensities shows a significant effect. The acquired results indicated that the building with the shear wall is more resistant and strong structures as compared to buildings without shear wall when undergoing seismic analysis.

scholarly journals Evaluation of Steel Plate Shear Wall Performance with Different Sections and Arrangements of Stiffeners and its Effect on Project Management during Construction and Improvement of the Building

2021 ◽  
Vol 11 (1) ◽  
pp. 6043-6063
Author(s):  
Ali Jafarian ◽  
Seyed Babak Jafarian
Keyword(s):  
Steel Plate ◽  
Nonlinear Dynamic Analysis ◽  
Shear Walls ◽  
Shear Wall ◽  
Economic Benefits ◽  
Lateral Loads ◽  
Steel Plate Shear Wall ◽  
High Rise ◽  
Earthquake Force ◽  
The Future

Considering the increase in the current construction process and the future needs of Iran, the necessity to use high-rise buildings for reduction in urbanization costs and optimal use of land will be inevitable in the future. The performance of steel plate shear wall system as a modern global system, which has an effective application in high-rise buildings and also brings economic benefits compared to previous systems, is evaluated in this study. Steel Plate Shear Walls (SPSW) are a new type of system resistant to wind and earthquake lateral loads, which dates back to the 1970s. In this research, eight samples of shear wall with various stiffening arrangements and sections with ST37 and ST52 alloys are modeled. To evaluate the nonlinear dynamic analysis, the samples are subjected to the San Fernando earthquake force and are modeled and analyzed by ABAQUS software based on the finite element theory. The results of analyzing the samples indicate better performance of the system with stiffener in both vertical and horizontal directions. Also, the use of sections with ST52 alloy has improved the performance of the shear wall by approximately 40%.

scholarly journals SEISMIC ANALYSIS OF MULTISTORIED IRREGULAR AND REGULAR BUILDING WITH MASONARY INFILLS

2021 ◽  
Vol 5 (12) ◽  
Author(s):  
Ashutosh Shrivastava ◽  
Rajesh Chaturvedi
Keyword(s):  
Urban Areas ◽  
Seismic Analysis ◽  
Response Spectrum ◽  
Pushover Analysis ◽  
Seismic Zone ◽  
Soft Storey ◽  
High Rise ◽  
Frame Building ◽  
Performance Point ◽  
Open Ground

Nowadays, as in the urban areas the space available for the construction of buildings is limited. So in limited space we have to construct such type of buildings which can be used for multiple purposes such as lobbies, car parking etc. To fulfill this demand, high rise buildings is the only option available. The performance of a high rise building during strong earthquake motion depends on the distribution of stiffness, strength and mass along both the vertical and horizontal directions. If there is discontinuity in stiffness, strength and mass between adjoining storeys of a building then such a building is known as irregular building. The present study focuses on the seismic performance of regular and vertical irregular building with and without masonary infills. In the present study G+11 building is considered for the analysis with modelling and analysis done on ETABS software v17.0.1. The earthquake forces are calculated as per IS 1893 (part 1): 2016 for seismic zone III. The width of strut is calculated by using equivalent diagonal strut method. Total five models are considered for the analysis i.e. regular building with bare frame, regular building with masonary infill, soft storey building with open ground storey, mass irregular building with masonary infill and vertical geometric irregular building with masonary infill. The non-linear static analysis (pushover analysis) and linear dynamic analysis (response spectrum analysis) are performed for all the models and thereby compare their results. From analysis, the parameters like performance point, time period, maximum storey displacement, maximum storey drifts, storey shears and overturning moments are determined and also comparative study is done for all the models. From the comparison, it is observed that the vertical geometric irregular building shows better performance under seismic loading and bare frame building shows inferior performance. Moreover, the performance of masonary infilled frame building is f

scholarly journals Influence of Shear Wall on Seismic Response of a Structure

2021 ◽  
Vol 9 (9) ◽  
pp. 1054-1060
Author(s):  
Siddhesh Bisane
Keyword(s):  
Structural Analysis ◽  
Shear Walls ◽  
Shear Wall ◽  
Main Concern ◽  
Structural Members ◽  
Lateral Loads ◽  
Comprehensive Understanding ◽  
High Rise ◽  
Story Drift ◽  
Wall Following

Abstract: Structural analysis is the science of determining the effects of different loads on structures. Structural stability and stiffness are a main concern in any high-rise structures. Shear walls are structural members that are mainly responsible for resisting lateral loads predominant on structures. They are mainly responsible to increase the stiffness, reduce story drift and displacement. In order to have a comprehensive understanding about the contribution of shear wall, following research is carried out. This research involves comparing two G+16 structures; one without a shear wall and one with it. The structure has 4 bays of 3m each along X direction and Z direction. In this, we will see how shear wall resists lateral sway and reduces story drift and increases stiffness. As the height increases, the shear wall absorbs more lateral load than the frame. The software to be used for analysis is STAADPro. Keywords: STAADPro, Stiffness, storey displacement, storey drift.

Analysis of Effective Location of Shear Wall for High Rise Building with U – Configuration

2021 ◽  
Vol 23 (2) ◽  
pp. 167-176
Author(s):  
Sekar Mentari ◽  
Rosi Nursani
Keyword(s):  
Lateral Displacement ◽  
Center Of Mass ◽  
Shear Walls ◽  
Shear Wall ◽  
Rotational Axis ◽  
Moment Frame ◽  
Earthquake Loads ◽  
High Rise ◽  
Live Loads ◽  
Special Moment Frame

Indonesia is one of the countries that is prone to earthquakes. In addition to the dead loads, superimposed dead loads, and live loads, the design of buildings in Indonesia must be concerned with earthquake loads. Installing shear walls in the building structure as the Special Moment Frame Dual System is one of a solution to withstand earthquake loads. However, the location of shear walls must be considered, especially in buildings with horizontal irregularities. This study aims to determine the optimum location of the shear walls in a 10-storey building that has U-configuration with dynamic earthquake loads. This research is a numerical simulation ran by modelling the structure with software. To know the effect of the shear wall’s location on a building, several variations of the shear wall configuration with different positions have been conducted. It can be seen the lateral displacement of each floor and the shear force are the response structure to withstand the dynamic earthquake loads. Shear walls that are located close to the center of mass of the building are the optimum variation because the position of the shear wall is the closest to the core area of the building, which is the rotational axis of the building.

A Stress Analytical Solution of Steel Reinforced Concrete Transfer Beam

2010 ◽  
Vol 163-167 ◽  
pp. 1329-1332
Author(s):  
Bin Liang ◽  
Meng Yang
Keyword(s):  
Finite Element ◽  
Reinforced Concrete ◽  
Shear Walls ◽  
Shear Wall ◽  
Nonlinear Finite Element ◽  
Nonlinear Finite Element Method ◽  
Element Calculation ◽  
Steel Reinforced Concrete ◽  
High Rise ◽  
Tension Member

The structural behavior of a steel reinforced concrete (SRC) transfer beam in high-rise building is studied in the paper. Mechanical properties and deformation characteristics between transfer beam and shear wall are analyzed by an analytic approach and the nonlinear finite element method. The stress analytical solutions for the SRC transfer beam are obtained and agree with finite element calculation data in an actual project. The results show that the beam can be as an eccentric tension member, meanwhile the performance of shear wall must be considered. And it also shows that the shear stress and vertical compressed stress must be considered in end both transfer beam and shear wall and there is interaction between the beam and the shear walls above. The results can be used to describe the behavior of the SRC transfer beam under complicated loads.

scholarly journals Effect of Shear Wall on RC Building of Varying Heights

2019 ◽  
Vol 8 (12) ◽  
pp. 766-770
Keyword(s):  
Aspect Ratio ◽  
Response Spectrum ◽  
Shear Walls ◽  
Shear Wall ◽  
Seismic Zone ◽  
Lateral Loads ◽  
Base Shear ◽  
Aspect Ratios ◽  
Rc Building ◽  
The Comparative Study

Earthquake is an unexpected and expensive disaster for both livelihood and economy. In the modern day construction, there has been a lot of importance to make the structure resistant against lateral loads for multi storied building. Shear walls are an option of lateral load resisting system. The Concept of designing shear wall is to provide building structure with sufficient strength and deformation capacity to sustain the demands imposed by lateral loads with adequate margin of safety. The study focuses on effect of shear wall on R.C. building at different heights. For this purpose five models of different heights 15m, 30m, 45m, 60m and 75m and with different aspect ratios of 1.33, 0.66, 0.44, 0.33 and 0.26 respectively have been considered. All the models were designed for seismic zone V. For analysis purpose response spectrum method of analysis is considered as per IS: 1893-2002. The comparative study has been done for base shear, storey displacement, storey drift and storey stiffness. Utilization of shear walls when placed at corners of the building of low aspect ratio in high rise buildings is more effective compared to the low rise buildings of higher aspect ratio, as it gives the larger base shear and lesser displacement. The storey stiffness and storey drift is greatly improved when shear wall is placed at corners of the building

Sign in / Sign up

Export Citation Format

Share Document