Assessment of recommended and acceptable image quality indicators’ values, based on materials, obtained with various aerial surveying systems for mapping purposes

2021 ◽  
Vol 975 (9) ◽  
pp. 30-40
Author(s):  
I.A. Anikeeva
Keyword(s):  
Quality Indicators ◽  
Random Noise ◽  
Joint Analysis ◽  
Natural Conditions ◽  
Technical Parameters ◽  
Technical Control ◽  
Airborne Imaging ◽  
Acceptable Image Quality ◽  
Calibration Parameters

The results of fine quality indicators assessment for images, obtained with various aerial surveying systems for mapping purposes are presented. The values of parameters that characterize technical conditions, technical parameters of airborne imaging and technologic settings for imagery postprocessing, natural conditions of aerial surveying are determined. The author presents a comparative analysis of fine quality indicators assessment both for photos, the quality of which was found to be satisfactory as production technical control results and those rejected due to some relevant indicators (haze, blurring, etc) and accepted unsuitable for creating cartographic products based on them. It is shown, that some quality indicators, such as spatial resolution, sharpness and the degree (standard deviation) of random noise, are advisable to be determined at performing factory calibration of aerial cameras and included in certificate as well as other calibration parameters as metrological characteristics of the obtained imagery. Acceptable values of fine quality indicators, obtained during joint analysis of previous theoretical researches results and experimental verification, based on images, obtained by various aerial surveying systems for mapping purposes were generalized and recommended during the research.

Method of numerical estimating aerial images indicators quality for mapping purposes

2021 ◽  
Vol 968 (2) ◽  
pp. 29-37
Author(s):  
I.A. Anikeeva
Keyword(s):  
Random Noise ◽  
Experimental Studies ◽  
Aerial Images ◽  
Practical Application ◽  
Correct Color ◽  
Numerical Assessment ◽  
Airborne Imaging ◽  
Imaging Sensors ◽  
Color Rendering

The task of assessing the quality of aerial imagery, obtained for mapping, in terms of vision properties, is very ambiguous due to the lack of objective criteria and evaluation methods. A system of indicators for aerial images quality and methods of their numerical assessment is presented. The fine aerial image’s quality is characterized by a set of its structural and gradation properties. The structural properties of the image are determined by the actual spatial resolution and photographic sharpness. Gradation properties of an image are characterized by the correct color rendering, the level of random noise and information completeness indicators – haze, radiometric resolution and the percentage of information loss in illumination and shadows.Methods of evaluating these indicators are formulated, and their recommended and acceptable numerical values are determined analytically. To clarify and correct the obtained analytical recommended and acceptable numerical values of the image quality indicators of their practical application possibility and further experimental studies are necessary with materials, obtained through various airborne imaging sensors for mapping.

scholarly journals Investigation of the Influence of Gas Turbine Power Stations on the Quality of Electric Energy in the Associated Petroleum Gas Utilization

2021 ◽  
Vol 14 (1) ◽  
pp. 299
Author(s):  
Anton Petrochenkov ◽  
Aleksandr Romodin ◽  
Dmitriy Leyzgold ◽  
Andrei Kokorev ◽  
Aleksandr Kokorev ◽  
...  
Keyword(s):  
Gas Turbine ◽  
Power Quality ◽  
Quality Indicators ◽  
Power Distribution ◽  
Electric Energy ◽  
Joint Analysis ◽  
Power Station ◽  
Power Stations ◽  
Gas Utilization

The problem of the quality of electric energy in the utilization of petroleum gas is considered. The article presents the results of the development of a mathematical description of power supply systems with gas turbine power stations based on two-shaft gas turbine units. The typical power distribution scheme of a gas turbine power station is given. The joint analysis of the generation modes of the gas turbine power station and the detected deviations of the power quality indicators values was carried out. The influence of the used mode on the power quality indicators is determined. As a result, the factors of operation of a gas turbine power station that affects power quality are identified, and recommendations for their elimination are given.

Criteria for evaluation of the coordinate measurements quality of parts geometric parameters at pilot-experimental production

2019 ◽  
pp. 3-8
Author(s):  
N.Yu. Bobrovskaya ◽  
M.F. Danilov
Keyword(s):  
Quality Indicators ◽  
Quality Management System ◽  
Technical Specification ◽  
Experimental Production ◽  
Technological Heredity ◽  
Coordinate Measurements ◽  
Reasonable Choice ◽  
The Stability ◽  
Geometric Elements

The criteria of the coordinate measurements quality at pilot-experimental production based on contemporary methods of quality management system and traditional methods of the measurements quality in Metrology are considered. As an additional criterion for quality of measurements, their duration is proposed. Analyzing the problem of assessing the quality of measurements, the authors pay particular attention to the role of technological heredity in the analysis of the sources of uncertainty of coordinate measurements, including not only the process of manufacturing the part, but all stages of the development of design and technological documentation. Along with such criteria as the degree of confidence in the results of measurements; the accuracy, convergence, reproducibility and speed of the results must take into account the correctness of technical specification, and such characteristics of the shape of the geometric elements to be controlled, such as flatness, roundness, cylindrical. It is noted that one of the main methods to reduce the uncertainty of coordinate measurements is to reduce the uncertainty in the initial data and measurement conditions, as well as to increase the stability of the tasks due to the reasonable choice of the basic geometric elements (measuring bases) of the part. A prerequisite for obtaining reliable quality indicators is a quantitative assessment of the conditions and organization of the measurement process. To plan and normalize the time of measurements, the authors propose to use analytical formulas, on the basis of which it is possible to perform quantitative analysis and optimization of quality indicators, including the speed of measurements.

Using the alveograph in developing requirements for the quality of flour for wafer sheet production

2020 ◽  
Vol 29 (12) ◽  
pp. 52-58
Author(s):  
E.P. Meleshkina ◽  
◽  
S.N. Kolomiets ◽  
A.S. Cheskidova ◽  
◽  
...  
Keyword(s):  
Rheological Properties ◽  
Quality Indicators ◽  
Wheat Flour ◽  
Mathematical Statistics ◽  
Intended Purpose ◽  
The Future ◽  
Relationship Of ◽  
The Relationship

Objectively and reliably determined indicators of rheological properties of the dough were identified using the alveograph device to create a system of classifications of wheat and flour from it for the intended purpose in the future. The analysis of the relationship of standardized quality indicators, as well as newly developed indicators for identifying them, differentiating the quality of wheat flour for the intended purpose, i.e. for finished products. To do this, we use mathematical statistics methods.

The impact of sex, gender and healthcare system on quality of care among young adults with acute myocardial infarction

2020 ◽  
Vol 41 (Supplement_2) ◽  
Author(s):  
V Raparelli ◽  
L Pilote ◽  
H Behlouli ◽  
J Dziura ◽  
H Bueno ◽  
...  
Keyword(s):  
Myocardial Infarction ◽  
Acute Myocardial Infarction ◽  
Young Adults ◽  
Quality Of Care ◽  
Healthcare System ◽  
Quality Indicators ◽  
Funding Source ◽  
Post Discharge ◽  
Single Payer

Abstract Background The quality of care among young adults with acute myocardial infarction (AMI) may be related to biological sex, psycho-socio-cultural (gender) determinants or healthcare system-level factors. Purpose To examine whether sex, gender, and the type of healthcare system influence the quality of AMI care among young adults. Methods A total of 4,564 AMI young adults (<55 years) (59% women, 47 years, 66% US) were analyzed from the VIRGO and GENESIS-PRAXY studies consisting of single-payer (Canada, Spain) versus multipayer (US) systems. For each patient treated in each system we calculated a quality of care score (QCS) for pre-AMI (1-year pre admission), in-hospital, and post-AMI (1-year post discharge) phases of care (number of quality indicators received divided by the total number [range=0–100%], with higher scores indicating better quality). Ordinal logistic or linear regression models, and 2-way interactions between sex, gender and healthcare system were tested. Results Women in the multipayer system had the highest risk factor burden. Across the phases of care for AMI, 20% of quality indicators were missed in both sexes. High stress, earner status, and social support were associated with a higher QCS in the pre-AMI phase, whereas only employment and earner status were associated with QCS in all other phases. In the pre-AMI phase, women had higher QCS than men, mainly in the single-payer system (adjusted-OR=1.85, 95% CI 1.46,2.35 vs. 1.07, 95% CI 0.84,1.36, P-interaction= 0.002). Regardless of sex, only employment status had a greater effect in the multipayer system (adjusted-OR=0.59, 95% CI 0.44,0.78 vs 1.13, 95% CI 0.89,1.44, P-interaction <0.001). In the in-hospital phase, women had a lower QCS than men, especially in the multipayer system (adjusted-mean-difference: −2.48, 95% CI-3.87, −1.08). Employment was associated with a higher QCS (2.0, 95% CI 0.9–3.17, P-interaction >0.05). Finally, in the post-AMI phase, men and women had a lower QCS, predominantly in the multipayer system. However, primary earners had higher QCS regardless of system. Conclusion Sex, gender, and healthcare system affected the quality of care after AMI. Women had a poorer in-hospital than men and both women and men had suboptimal post-discharge care. Being unemployed lowered the quality of care, more so in the multipayer system. Funding Acknowledgement Type of funding source: Public grant(s) – National budget only. Main funding source(s): Canadian Institutes of Health and Research (CIHR)

scholarly journals Quality in Assisted Living: Does It Lie in the Eyes of the Beholder?

2020 ◽  
Vol 4 (Supplement_1) ◽  
pp. 726-727
Author(s):  
Diana White ◽  
Tunalilar Ozcan ◽  
Serena Hasworth ◽  
Jaclyn Winfree
Keyword(s):  
Quality Indicators ◽  
Residential Care ◽  
Assisted Living ◽  
Physical Environment ◽  
Sampling Strategy ◽  
Perceived Quality ◽  
Two Stage ◽  
Regulatory Perspective ◽  
To Receive

Abstract Quality is defined in multiple ways and by different stakeholders (e.g., residents, regulators, informed observers). Using a two-stage stratified sampling strategy, we collected data from N=241 residents living in 31 assisted living and residential care communities (AL/RC) in Oregon. Residents rated their overall satisfaction and satisfaction with the AL/RC as a place to live and to receive care. Each interviewer completed a facility profile summarizing their observations about the setting, including quality of staff-resident interactions and physical environment. Residents and interviewers were also asked whether they would recommend the community to others. Finally, we used deficiency citations given during regular inspections by the licensing agency to proxy regulatory perspective. Results show that perceived quality varied by stakeholder (e.g., residents’ assessments differed from deficiency citations). Given this variation, findings suggest that efforts to make quality indicators publicly available should include multiple measures and perspectives, especially residents.

P5599Prognostic impact of quality indicators on outcomes of acute aortic dissection in Japan

2019 ◽  
Vol 40 (Supplement_1) ◽  
Author(s):  
T Yamaguchi ◽  
M Nakai ◽  
Y Sumita ◽  
Y Miyamoto ◽  
H Matsuda ◽  
...  
Keyword(s):  
Aortic Dissection ◽  
Hospital Mortality ◽  
Quality Indicators ◽  
Acute Aortic Dissection ◽  
Vascular Diseases ◽  
Type A ◽  
Administrative Database ◽  
Type B ◽  
Practice Gaps

Abstract Background Despite recent advances in diagnosis and management, the mortality of acute aortic dissection (AAD) remains high. Purpose This study aims to develop quality indicators (QIs) for the management of AAD, and to evaluate the associations between QIs and outcomes of AAD in a Japanese nationwide administrative database. Methods A total of 18,348 patients suffered from AAD (Type A: 10,131, Type B: 8,217) in the Japanese Registry of All Cardiac and Vascular Diseases database between 2012 and 2015 were studied. A systematic review was performed to establish initial index items for QIs. Evaluation was performed through the expert consensus meeting using a Delphi method. Associations between developed QIs and the mortality were determined by multivariate mixed logistic regression analyses. Results A total of nine QIs (five structural and four processatic) were developed. Achievements of developed QIs (High: 7–9, Middle: 4–6, Low: 0–3) were significantly associated with lower in-hospital mortality even after adjustment for covariates in both type A (Middle: odds ratio [OR], 0.257; 95% confidence interval [CI], 0.211–0.312; P<0.001; High: OR, 0.064; 95% CI, 0.047–0.086; P<0.001 vs. Low) and type B (Middle: OR, 0.447; 95% CI, 0.338–0.590; P<0.001; High: OR, 0.128; 95% CI, 0.077–0.215; P<0.001 vs. Low). Additionally, achievements of structural and processatic QIs were consistently associated with reduced in-hospital mortality. QIs and in-hospital mortality Conclusions Developed QIs for AAD management were significantly associated with lower in-hospital mortality. Evaluation of each hospital's management with QIs could be helpful to equalize quality of treatment and to fill the evidence-to-practice gaps in the real-world treatment.

Using Assessing Care of Vulnerable Elders Quality Indicators to Measure Quality of Hospital Care for Vulnerable Elders

2007 ◽  
Vol 55 (11) ◽  
pp. 1705-1711 ◽  
Author(s):  
Vineet M. Arora ◽  
Martha Johnson ◽  
Jared Olson ◽  
Paula M. Podrazik ◽  
Stacie Levine ◽  
...  
Keyword(s):  
Quality Indicators ◽  
Hospital Care

scholarly journals Teledermatology in Times of COVID-19 Confinement: Comparing Patients’ and Physicians’ Satisfaction by the Standardized Brest Teledermatology Questionnaire

Dermatology ◽  
2021 ◽  
pp. 1-6
Author(s):  
Joachim W. Fluhr ◽  
Annie Gueguen ◽  
Delphine Legoupil ◽  
Emilie Brenaut ◽  
Claire Abasq ◽  
...  
Keyword(s):  
Main Question ◽  
Chronic Patients ◽  
Dermatology Department ◽  
Global Satisfaction ◽  
Technical Parameters ◽  
Face To Face ◽  
Almost All ◽  
Outpatient Settings

The French government imposed the first COVID-19 pandemic lockdown from March 17 until May 11, 2020. Only emergency cases and teledermatology (TD) were allowed in outpatient settings. A standardized questionnaire was developed to compare the satisfaction level of patients and their treating physicians. Our main question was whether the patients would perceive TD as a valid alternative for direct physical face-to-face consultation. Eighty-two patients and their 4 treating dermatologists from one dermatology department participated in the study (43 females, 39 males) with a mean age of 46.6 years (SD ±23.9). The reason for TD was a chronic disease in the majority (87.8%), and mainly as a follow-up (96.3%). Regarding satisfaction, almost all categories rated around 9 on a 0–10 verbal analogue scale. The same level of global satisfaction could be seen between the patients and the physicians as well as for the quality of the patient-physician relation and whether all questions could be addressed during the TC. Physicians showed significantly higher scores than patients only for the category of “length” of the consultation. Gender, age, as well as distance between the clinic and home of the patient were not influencing factors for satisfaction. Regarding the technical parameters, the evaluation was mostly comparable for patients and physicians, but overall lower than the relational satisfaction parameters, especially for image quality. Patients were significantly more motivated to continue the TD after the lockdown than their treating dermatologists. We see an interest for implementing TD in specialized centers with chronic patients coming from remote places for regular follow-ups. TD cannot replace in-person patient-physician interaction, but was helpful during the lockdown. As a result, TD might become part of dermatology training to prepare for future lockdown situations.

IMPACT OF INNOVATIVE METHOD OF PREPARING TOBACCO LEAVES FOR DRYING ON THE BASIC PARAMETERS OF QUALITY OF TOBACCO RAW MATERIAL

2019 ◽  
Author(s):  
Е.Е. Ульянченко
Keyword(s):  
Chemical Composition ◽  
Quality Indicators ◽  
Raw Materials ◽  
Raw Material ◽  
Tobacco Leaves ◽  
Commercial Grade ◽  
Innovative Method ◽  
Main Indicator ◽  
Basic Parameters

Исследовано влияние приема прорезания средней жилки на основные качественные показатели табачного сырья. Исследования проводили на листьях основных сортотипов табака Трапезонд и Остролист по массовым ломкам. Прорезание жилки осуществляли на инновационном оборудовании экспериментальном образце линии подготовки листьев табака к сушке ЛПТС360 (ВНИИТТИ, Краснодар). Качество табачного сырья с прорезанной жилкой определяли по товарным сортам, технологическим и курительным свойствам, химическому составу по методикам лабораторного контроля ВНИИТТИ. Инновационный способ подготовки табака к сушке в едином потоке с применением технологического оборудования, включающего прорезатель, выявил положительный технологический результат. Установлена эффективность приема прорезания средней жилки: срок естественной сушки листьев с прорезанной жилкой сократился в 2,5 раза выход 1го товарного сорта сырья составил 74,60 87,93 выход волокна сырья с прорезанной жилкой превышает минимальное значение технологических норм (75) в 1,15 1,26 раз условный расход сырья на единицу курительных изделий меньше норматива на 6 25 улучшен основной показатель химического состава табачного сырья (число Шмука) в 1,6 4,6 раза у сортотипа Трапезонд, в 1,2 1,5 раза у сортотипа Остролист дегустационные свойства сырья не ухудшились. Инновационный способ подготовки листьев табака к сушке, включающий прием прорезания средней жилки, рекомендуется для применения в производстве табачного сырья. The influence of middle vein cutting method on the main quality indicators of tobacco raw materials is studied. Studies were carried out on the leaves of the main varieties of tobacco Trapezond and Ostrolist, on mass breakdowns. Vein cutting was carried out on the innovative equipment of the line of preparation of tobacco leaves for drying LPTS360 (GNU VNIITTI RAA, Krasnodar). The quality of tobacco raw materials with a cut vein was determined by commercial grades, technological and Smoking properties, chemical composition in accordance with the methods VNIITTI. An innovative method of preparing tobacco for drying in a single stream with the use of technological equipment, including a cutter, revealed a positive technological result. The period of natural drying of leaves with cut veins decreased by 2,5 times. The yield of the 1st commercial grade of raw materials was 74,60 87,93. The output of the fiber raw material with cut vein exceeds the minimum value of technological norms (75) in 1,15 1,26 times. Conditional consumption of raw materials per unit of Smoking products is less than the norm by 6 25. The method of cutting the middle vein of the leaves improves the main indicator in the chemical composition of tobacco raw materials (Schmuck ratio) 1,6 4,6 times in the variety Trapezond and 1,2 1,5 times in the variety Ostrolist. The tasting properties of raw materials have not deteriorated. Analysis of raw material quality indicators showed that the innovative method of cutting the middle vein is effective and recommended for use in the production of tobacco raw materials.

Sign in / Sign up

Export Citation Format

Share Document