scholarly journals Optimizing fertigation of eggplant production in hydroponic coco-peat substrate

2020 ◽  
Vol 21 (2) ◽  
pp. 129-145
Author(s):  
Edouard Tabet ◽  
◽  
Reda Awali ◽  
Dalida Darazi ◽  
Chadi Hosri ◽  
...  
Keyword(s):  
Conventional Method ◽  
Plant Size ◽  
Fertilizer Application ◽  
Production Cycle ◽  
Limiting Factor ◽  
Average Mass ◽  
The Third ◽  
Maximum Value ◽  
High Investment ◽  
The Difference

This research aims at optimizing eggplant cultivation by comparing hydroponic fertigation recipes in coco-peat substrate with traditional soil cultivation. The first two groups of 36 plants each are fertilized according to the recipes recommended by two companies (A and B), treatments 1 and 2 respectively. The third is fertilized according to the conventional method in the soil adopted by farmers (group C). Company A applies standard fertilizer application protocol throughout the life of the plant with a stable pH and electro conductivity of 6 and 2.8 mS / cm respectively. Company B applies an upward fertilizer scheme during the plant's production cycle with a stable pH of 5.6, but an electro conductivity that varies from 2.1 mS / cm at the vegetative phase to 2.5 mS / cm from the appearance of the 1st fruit. Despite its high investment, the two hydroponic treatments T1 and T2 showed greater plant size (127 cm and 129 cm respectively at the 12th week), more fruits (15 fruits per plant each week, compared to 8 fruits per plant in the soil), and higher yield (average mass per plant reached a maximum value at the 11th week of 1.192 g for T1 and 1,189 g for T2 compared to 499 g for the soil). The difference in revenues shows a negligible financial advantage in favor of Company B. Adopting fertilization recipe of Company A or B is not a limiting factor at the financial level hence either one of the two formulations is adequate.

scholarly journals Optimal plot size for experimental trials with Opuntia cactus pear

2019 ◽  
Vol 42 ◽  
pp. e42579
Author(s):  
Bruno Vinícius Castro Guimarães ◽  
Sérgio Luiz Rodrigues Donato ◽  
Ignacio Aspiazú ◽  
Alcinei Místico Azevedo ◽  
Abner José de Carvalho
Keyword(s):  
Selection Criteria ◽  
Production Cycle ◽  
Cactus Pear ◽  
The Third ◽  
Plot Size ◽  
Experimental Area ◽  
Experimental Variation ◽  
The Difference ◽  
Experimental Trials ◽  
Plot Design

The objective of the study with ‘Gigante’ cactus pear was to determine the size of plots that optimize the implementation of experiments with greater accuracy, spatial adequacy and efficiency of use of the experimental area by the Hatheway method (1961). The experiment was conducted in a uniform spacing of 2.0 x 0.2 m with 384 basic experimental units (BEUs). The vegetative descriptors were evaluated in the third production cycle. The coefficient of experimental variation (CVe) is the factor with the greatest influence for the experimental plot design; followed by the parameters - index d, which determines the difference to be detected between treatments; by the number of replications and, finally, by the number of treatments, which has the smallest effect on the plot size (BEUs). For the efficiency of use of the experimental area - EUEA, one can select larger plots (three BEU) with a lower number of repetitions (three) or smaller plots (two UEB) with a higher number of repetitions (10) with the same level of accuracy to evaluate the yield of ‘Gigante’ cactus pear. However, the selection criteria are based on the smallest experimental area, reflecting the maximum of EUEA. Useful plots with eight basic units are considered efficient for experiments with cactus pear.

Ragam Bangunan Perundang-Undangan Hukum Keluarga di Negera-Negara Muslim Modern: Kajian Tipologis

2018 ◽  
Vol 11 (1) ◽  
pp. 49-60
Author(s):  
Miftahul Huda
Keyword(s):  
Saudi Arabia ◽  
United Arab Emirates ◽  
Islamic Law ◽  
Family Law ◽  
Marriage Law ◽  
The Third ◽  
Muslim Countries ◽  
Fourth Type ◽  
Modern Family ◽  
The Difference

The reality of the difference in applying Islamic law in the context of marriage law legislation in modern Muslim countries is undeniable. Tunisia and Turkey, for example, have practiced Islamic law of liberal nuance. Unlike the case with Saudi Arabia and the United Arab Emirates that still use the application of Islamic law as it is in their fiqh books. In between these two currents many countries are trying to apply the law in their own countries by trying to bridge the urgent new needs and local wisdom. This is widely embraced by modern Muslim countries in general. This paper reviews typologically the heterogeneousness of family law legislation of modern Muslim countries while responding to modernization issues. Typical buildings seen from modern family law reforms can be classified into four types. The first type is progressive, pluralistic and extradoctrinal reform, such as in Turkey and Tunisia. The second type is adaptive, unified and intradoctrinal reform, as in Indonesia, Malaysia, Morocco, Algeria and Pakistan. The third type is adaptive, unified and intradoctrinal reform, represented by Iraq. While the fourth type is progressive, unifiied and extradoctrinal reform, which can be represented by Somalia and Algeria.

Ragam Qiraat Al-Qur'an

SUHUF ◽  
2015 ◽  
Vol 2 (1) ◽  
pp. 53-72
Author(s):  
Ahmad Fathoni
Keyword(s):  
The Third ◽  
The Difference ◽  
The Way

The object of the study of the knowledge of the variety of the Quranic reading  is the  Qur'an itself. The focus is on the difference of the reading and its articulation. The method is based on the riwayat or narration which is originated from the Prophet (Rasulullah saw) and its use is to be one of the instruments to keep the originality of the Qur’an. The validity of the reading the Qur’an is to be judged based on the valid chain  (sanad ¡a¥ī¥)  in accord with the Rasm U£mānÄ« as well as with the  Arabic grammar. Whereas the qualification of its originality is divided into six stages as follow: the first is mutawātir, the second is masyhÅ«r, the third is āhād, the fourth is syaz, the fifth is maudū‘, and the six is mudraj. Of this six catagories, the readings which can be included in the catagory of mutawātir are Qiraat Sab‘ah (the seven readings) and Qiraat ‘Asyrah  (the ten readings). To study this knowledge of reading the Qur’an (ilmu qiraat), one is advised to know about special terms being used such as  qiraat  (readings), riwayat (narration), tarÄ«q (the way), wajh (aspect), mÄ«m jama‘, sukÅ«n mÄ«m jama‘ and many others.

Causation, Explanation, and the Metaphysics of Aspect

2018 ◽  
Author(s):  
Bradford Skow
Keyword(s):  
Background Condition ◽  
Structural Explanation ◽  
Levels Of Explanation ◽  
Lexical Aspect ◽  
The Third ◽  
Main Verb ◽  
The Difference ◽  
In Virtue Of

This book aims to answer the following questions: what is the difference between a cause and a background condition? What is it to manifest a disposition? Can dispositions be extrinsic? What is the most basic kind of causation? And, what might a structural explanation be? Each chapter takes up a subset of these questions; the chapters are written to be readable independently. The answers defended rely on three ideas. Two of those ideas use a distinction from the study of lexical aspect, namely the distinction between stative verbs and non-stative verbs. The first idea is that events go with non-stative verbs, in the sense that “If S, then an event occurred in virtue of the fact that S” is true when the main verb in the clause going in for “S” is non-stative. The second is that acting, doing something, goes with non-stative verbs, in the sense that “In Ving X did something” is true iff V is a non-stative verb. The third idea is about levels of explanation: “(A because B) because C” does not entail “A because C.”

Three Perspectives on Centrality

2020 ◽  
pp. 333-351
Author(s):  
Stephen P. Borgatti ◽  
Martin G. Everett
Keyword(s):  
Centrality Measures ◽  
Graph Invariant ◽  
Propagation Process ◽  
Centrality Measure ◽  
The Third ◽  
First Arrival ◽  
The Difference

This chapter presents three different perspectives on centrality. In part, the motivation is definitional: what counts as a centrality measure and what doesn’t? But the primary purpose is to lay out ways that centrality measures are similar and dissimilar and point to appropriate ways of interpreting different measures. The first perspective the chapter considers is the “walk structure participation” perspective. In this perspective, centrality measures indicate the extent and manner in which a node participates in the walk structure of a graph. A typology is presented that distinguishes measures based on dimensions such as (1) what kinds of walks are considered (e.g., geodesics, paths, trails, or unrestricted walks) and (2) whether the number of walks is counted or the length of walks is assessed, or both. The second perspective the chapter presents is the “induced centrality” perspective, which views a node’s centrality as its contribution to a specific graph invariant—typically some measure of the cohesiveness of the network. Induced centralities are computed by calculating the graph invariant, removing the node in question, and recalculating the graph invariant. The difference is the node’s centrality. The third perspective is the “flow outcomes” perspective. Here the chapter views centralities as estimators of node outcomes in some kind of propagation process. Generic node outcomes include how often a bit of something propagating passes through a node and the time until first arrival of something flowing. The latter perspective leads us to consider the merits of developing custom measures for different research settings versus using off-the-shelf measures that were not necessarily designed for the current purpose.

scholarly journals Increased risk of preeclampsia after use of paracetamol during pregnancy – causal or coincidence?

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Hetti von Hellens ◽  
Leea Keski-Nisula ◽  
Heidi Sahlman
Keyword(s):  
Third Trimester ◽  
Retrospective Case ◽  
Reverse Causation ◽  
Gestational Period ◽  
The Third ◽  
Precise Data ◽  
Increased Risk ◽  
Study Population ◽  
The Difference ◽  
Risk Of Preeclampsia

Abstract Background The maternal use of paracetamol during pregnancy has been associated with the development of preeclampsia. This study aims to clarify whether the connection is causal or whether it is due to reverse causation. Methods This study is a continuation of the retrospective case cohort study examining 2,508 pregnant women using a variety of drugs and the development of preeclampsia (1,252 women with preeclampsia and 1,256 controls). For the purposes of this study, more precise data was collected from several hospital databases of the women among this cohort who had reported taking paracetamol during pregnancy (indications, gestational period etc.); this was evaluated in association with the development of preeclampsia. Results 5.5% (100 cases and 37 controls) of all the study population (2,508) had clearly reported paracetamol use. Women with preeclampsia had used significantly more often paracetamol during pregnancy compared to controls (cases 8.0%, controls 2.9%, p < 0.001). The difference was most evident in the third trimester (after the 29th GW) and the use of paracetamol was associated with both mild and severe preeclampsia. Headache and “general pain” were the most common indications for medication among all paracetamol users. Conclusions The use of paracetamol in the third trimester of pregnancy was associated with preeclampsia. This observation indicates that association between paracetamol use and preeclampsia is probably due to reverse causation, i.e. women with preeclampsia experience more headaches due to preeclampsia symptoms since this association was not detected with the use of paracetamol in earlier stages of pregnancy.

scholarly journals Novel Route Planning Method to Improve the Operational Efficiency of Capacitated Operations. Case: Application of Organic Fertilizer

2021 ◽  
Vol 3 (3) ◽  
pp. 458-477
Author(s):  
Mahdi Vahdanjoo ◽  
Claus G. Sorensen
Keyword(s):  
Organic Fertilizer ◽  
Route Planning ◽  
Fertilizer Application ◽  
Operational Efficiency ◽  
Application Rate ◽  
Simultaneous Optimization ◽  
Limiting Factor ◽  
Application Process ◽  
Optimal Sequence ◽  
Proposed Model

A field area coverage-planning algorithm has been developed for the optimization and simulation of capacitated field operations such as the organic fertilizer application process. The proposed model provides an optimal coverage plan, which includes the optimal sequence of the visited tracks with a designated application rate. The objective of this paper is to present a novel approach for route planning involving two simultaneous optimization criteria, non-working distance minimization and the optimization of application rates, for the capacitated field operations such as organic fertilizer application to improve the overall operational efficiency. The study and the developed algorithm have shown that it is possible to generate the optimized coverage plan based on the required defined capacity of the distributer. In this case, the capacity of the distributer is not considered a limiting factor for the farmers. To validate this new method, a shallow injection application process was considered, and the results of applying the optimization algorithm were compared with the conventional methods. The results show that the proposed method increase operational efficiency by 19.7%. Furthermore, the applicability of the proposed model in robotic application were demonstrated by way of two defined scenarios.

scholarly journals How to talk with the family of a dying patient: anger to understanding, rage to compassion, loss to acceptance

2021 ◽  
pp. bmjspcare-2021-002971
Author(s):  
Moshe Y Flugelman
Keyword(s):  
Goal Setting ◽  
Stressful Situation ◽  
Family Needs ◽  
The Third ◽  
Single Entity ◽  
The Family ◽  
Patient Families ◽  
The Difference ◽  
Dying Patient

Informing families about the impending or actual death of their relatives is one of the most challenging and complex tasks a physician may face. The following article describes goal setting and provides five roles/recommendations for conducting the encounter with patient families regarding the imminent or actual death of their relatives. Importantly, the encounter should be family-centred, and the physician should be highly attentive to family needs. The following roles should be applied based on family needs and should not be sequential as numbered. The first and basic role is to inform the family at the earliest possible time and as often as possible. The second goal of the physician is to convey to the family that their relative received the needed therapy during his hospitalisation or in the community. The third goal of the physician is to help the family reach acceptance of the death of their relative and leave the hospital having moved beyond anger and bargaining. The fourth goal of the physician during the encounters is to reduce or alleviate guilt by stating that nothing could have changed the course of the disease and that all efforts were made to save the patient. The fifth role of the physician is to try and help the family as a single entity and maintain their unity during this stressful situation. Following these roles/methods will help families in the stressful situation and will create the difference between anger and understanding, rage and compassion, and loss and acceptance.

scholarly journals 395 Impact of pig mortality on U.S. pig producers

2020 ◽  
Vol 98 (Supplement_4) ◽  
pp. 184-185
Author(s):  
Caleb M Shull
Keyword(s):  
Feed Efficiency ◽  
Management Practices ◽  
Production Systems ◽  
Research Priorities ◽  
Functional Approach ◽  
Production Cycle ◽  
Limiting Factor ◽  
Significant Challenge ◽  
The Relationship ◽  
Positive Step

Abstract Swine producers in the U.S. face a significant challenge. On top of the ever-changing market dynamics that lead to wide swings in profitability or loss, is an underlying issue of pig mortality that the industry must address. While significant improvements in total piglets born per litter have been achieved over the last 10 years, pig mortality has seen no improvement or has worsened (Figure 1). When expressed as a percentage of piglets born (excluding mummies), a total of 7.9% were recorded as stillborn and 13.4% died prior to weaning in 2019. Assuming a typical mortality range of 7–10% from weaning to harvest, a typical U.S. producer could expect to lose around 27–30% of all piglets born. In addition, the average producer had around 12% annual sow mortality (Figure 1). Litter size and post-weaning growth rate and feed efficiency will always factor heavily into research priorities due to the economic impact associated with those traits; however, the opportunity to drive value through reduction in pig losses across the production cycle is staggering. In defense of the industry, improving pig survival is not an easy task for a number of reasons. The sample size (i.e., number of pigs) required to do mortality research correctly is often a limiting factor for many production systems. Furthermore, a cross-functional approach is likely required to make significant improvements in mortality. Specifically, the relationship between genetics, health, and management practices warrant consideration. Recent collaboration across the industry to improve mortality is a positive step forward and this collaboration should continue moving forward.

Magnetocrystalline Anisotropy and Twinning Stress of 10M and 2M Martensites in Ni-Mn-Ga System

2006 ◽  
Vol 512 ◽  
pp. 195-200 ◽  
Author(s):  
Nariaki Okamoto ◽  
Takashi Fukuda ◽  
Tomoyuki Kakeshita ◽  
Tetsuya Takeuchi
Keyword(s):  
Magnetic Field ◽  
Shear Stress ◽  
Magnetocrystalline Anisotropy ◽  
Anisotropy Constant ◽  
The Other ◽  
Magnetic Shear ◽  
Maximum Value ◽  
Twinning Plane ◽  
Twinning Shear ◽  
The Difference

Ni2MnGa alloy with 10M martensite exhibits rearrangement of martensite variants (RMV) by magnetic field, but Ni2.14Mn0.92Ga0.94 with 2M martensite does not. In order to explain the difference, we measured uniaxial magnetocrystalline anisotropy constant Ku and the stress required for twinning plane movement τreq in these alloys. Concerning the former alloy, the maximum value of magnetic shear stress acting across twinning plane τmag, which is evaluated as |Ku| divided by twinning shear, becomes larger than τr eq. On the other hand, concerning the latter alloy, the maximum of τmag is only one-tenth of τreq at any temperature examined. Obviously, the relation, τmag> τr eq, is satisfied when RMV occurs by magnetic field and vice versa. In this martensite, the large twinning shear of 2M martensite is responsible for small τmag and large τreq.

Sign in / Sign up

Export Citation Format

Share Document