scholarly journals Influential parameters of nitrogen oxides emissions for microturbine swirl burner with pilot burner

2010 ◽  
Vol 64 (4) ◽  
pp. 357-363 ◽  
Author(s):  
Miroljub Adzic ◽  
Marija Zivkovic ◽  
Vasko Fotev ◽  
Aleksandar Milivojevic ◽  
Vuk Adzic
Keyword(s):  
Thermal Power ◽  
High Energy ◽  
Nox Emission ◽  
Swirl Number ◽  
Main Burner ◽  
Swirl Flows ◽  
Wide Range ◽  
Micro Turbine ◽  
Influential Parameters ◽  
Pilot Burner

Swirl burners are the most common type of device in wide range of applications, including gas turbine combustors. Due to their characteristics, swirl flows are extensively used in combustion systems because they enable high energy conversion in small volume with good stabilization behavior over the wide operating range. The flow and mixing process generated by the swirl afford excellent flame stability and reduced NOx emissions. Experimental investigation of NOx emission of a purposely designed micro turbine gas burner with pilot burner is presented. Both burners are equipped with swirlers. Mixtures of air and fuel are introduced separately: through the inner swirler - primary mixture for pilot burner, and through the outer swirler - secondary mixture for main burner. The effects of swirl number variations for the both burners were investigated, including parametric variations of the thermal power and air coefficient. It was found that the outer swirler affects the emission of NOx only for the air coefficient less than 1.4. The increase of swirl number resulted in decrease of NOx emission. The inner swirler and thermal power were found to have negligible effect on emission.

scholarly journals Experimental Investigation on the Effects of the Geometry of the Pilot Burner on Main Flame

Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 1115
Author(s):  
Cheol Woo Lee ◽  
In Su Kim ◽  
Jung Goo Hong
Keyword(s):  
Experimental Investigation ◽  
Thermal Damage ◽  
The Novel ◽  
Main Burner ◽  
Wide Range ◽  
Vertical Location ◽  
Burner Flame ◽  
Real Size ◽  
Flame Shape ◽  
Pilot Burner

Various kinds of pilot burners were experimentally investigated to examine the effects of their geometry and their location relative to the main burner of a real size combustor. In addition, a wide range of fuel equivalence ratios were investigated to analyze the feasibility of the novel pilot burner for the conventional burner application. From the results, it is shown that the novel pilot burner with multi air holes had a thin, straight, long and stable pilot flame, while the conventional pilot burner had a thick, lifted, short and unstable flame. It is also shown that the novel pilot burner with an upper air flow hole had a straight pilot flame which led to less thermal damage to the burner combustor. This study suggests that not only pilot burner flame shape but also the vertical location of the pilot burner from the main burner combustor has a significant effect on combustor durability.

Microfabrication research at the National Submicron Facility

1983 ◽  
Vol 41 ◽  
pp. 86-89
Author(s):  
E.D. Wolf
Keyword(s):  
Integrated Circuits ◽  
Particle Physics ◽  
High Speed ◽  
New Technology ◽  
High Energy ◽  
High Energy Particle ◽  
New Science ◽  
Wide Range ◽  
Intermediate Domain ◽  
Circuit Function

Most microelectronics devices and circuits operate faster, consume less power, execute more functions and cost less per circuit function when the feature-sizes internal to the devices and circuits are made smaller. This is part of the stimulus for the Very High-Speed Integrated Circuits (VHSIC) program. There is also a need for smaller, more sensitive sensors in a wide range of disciplines that includes electrochemistry, neurophysiology and ultra-high pressure solid state research. There is often fundamental new science (and sometimes new technology) to be revealed (and used) when a basic parameter such as size is extended to new dimensions, as is evident at the two extremes of smallness and largeness, high energy particle physics and cosmology, respectively. However, there is also a very important intermediate domain of size that spans from the diameter of a small cluster of atoms up to near one micrometer which may also have just as profound effects on society as “big” physics.

Compact back-scattered electrons' energy analyzer for standard SEM

1994 ◽  
Vol 52 ◽  
pp. 488-489
Author(s):  
S. Likharev ◽  
A. Kramarenko ◽  
V. Vybornov
Keyword(s):  
Depth Resolution ◽  
High Energy ◽  
Primary Beam ◽  
Layer By Layer ◽  
Energy Analyzer ◽  
High Energy Part ◽  
Small Window ◽  
Energy Part ◽  
Wide Range ◽  
High Voltage Supply

At present time the interest is growing considerably for theoretical and experimental analysis of back-scattered electrons (BSE) energy spectra. It was discovered that a special angle and energy nitration of BSE flow could be used for increasing a spatial resolution of BSE mode, sample topography investigations and for layer-by layer visualizing of a depth structure. In the last case it was shown theoretically that in order to obtain suitable depth resolution it is necessary to select a part of BSE flow with the directions of velocities close to inverse to the primary beam and energies within a small window in the high-energy part of the whole spectrum.A wide range of such devices has been developed earlier, but all of them have considerable demerit: they can hardly be used with a standard SEM due to the necessity of sufficient SEM modifications like installation of large accessories in or out SEM chamber, mounting of specialized detector systems, input wires for high voltage supply, screening a primary beam from additional electromagnetic field, etc. In this report we present a new scheme of a compact BSE energy analyzer that is free of imperfections mentioned above.

scholarly journals Low-Energy Electron Damage to Condensed-Phase DNA and Its Constituents

2021 ◽  
Vol 22 (15) ◽  
pp. 7879
Author(s):  
Yingxia Gao ◽  
Yi Zheng ◽  
Léon Sanche
Keyword(s):  
Condensed Phase ◽  
Genetic Material ◽  
High Energy ◽  
Dna Lesions ◽  
Low Energy ◽  
Experimental Investigations ◽  
Experimental Conditions ◽  
Strand Breaks ◽  
Sequence Of Events ◽  
Wide Range

The complex physical and chemical reactions between the large number of low-energy (0–30 eV) electrons (LEEs) released by high energy radiation interacting with genetic material can lead to the formation of various DNA lesions such as crosslinks, single strand breaks, base modifications, and cleavage, as well as double strand breaks and other cluster damages. When crosslinks and cluster damages cannot be repaired by the cell, they can cause genetic loss of information, mutations, apoptosis, and promote genomic instability. Through the efforts of many research groups in the past two decades, the study of the interaction between LEEs and DNA under different experimental conditions has unveiled some of the main mechanisms responsible for these damages. In the present review, we focus on experimental investigations in the condensed phase that range from fundamental DNA constituents to oligonucleotides, synthetic duplex DNA, and bacterial (i.e., plasmid) DNA. These targets were irradiated either with LEEs from a monoenergetic-electron or photoelectron source, as sub-monolayer, monolayer, or multilayer films and within clusters or water solutions. Each type of experiment is briefly described, and the observed DNA damages are reported, along with the proposed mechanisms. Defining the role of LEEs within the sequence of events leading to radiobiological lesions contributes to our understanding of the action of radiation on living organisms, over a wide range of initial radiation energies. Applications of the interaction of LEEs with DNA to radiotherapy are briefly summarized.

scholarly journals Optically transparent and very thin structure against electromagnetic pulse (EMP) using metal mesh and saltwater for shielding windows

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Duy Tung Phan ◽  
Chang Won Jung
Keyword(s):  
Electromagnetic Pulse ◽  
Low Cost ◽  
High Energy ◽  
Metal Plate ◽  
Optical Transparency ◽  
Shielding Effectiveness ◽  
Concrete Wall ◽  
Metal Mesh ◽  
Wide Range ◽  
Optically Transparent

AbstractAn electromagnetic pulse (EMP) with high energy can damage electronic equipment instantly within a wide range of thousands of kilometers. Generally, a metal plate placed inside a thick concrete wall is used against an EMP, but it is not suitable for an EMP shielding window, which requires not only strong shielding effectiveness (SE) but also optical transparency (OT). In this paper, we propose a very thin and optically transparent structure with excellent SE for EMP shielding window application. The proposed structure consists of a saltwater layer held between two glass substrates and two metal mesh layers on the outside of the glass, with a total thickness of less than 1.5 cm. The SE and OT of the structure are above 80 dB and 45%, respectively, which not only meet the requirement of EMP shielding for military purposes but also retain the procedure of good observation. Moreover, the OT of the structure can be significantly improved using only one metal mesh film (MMF) layer, while the SE is still maintained high to satisfy the required SE for home applicants. With the major advantages of low cost, optical transparency, strong SE, and flexible performance, the proposed structure can be considered a good solution for transparent EMP shielding windows.

Enabling highly reversible sodium metal cycling across a wide temperature range with dual-salt electrolytes

2021 ◽  
Author(s):  
Akila C. Thenuwara ◽  
Pralav P. Shetty ◽  
Neha Kondekar ◽  
Chuanlong Wang ◽  
Weiyang Li ◽  
...  
Keyword(s):  
Wide Temperature Range ◽  
High Energy ◽  
Liquid Electrolyte ◽  
Metal Cycling ◽  
Temperature Range ◽  
Sodium Metal ◽  
Wide Range

A new dual-salt liquid electrolyte is developed that enables the reversible operation of high-energy sodium-metal-based batteries over a wide range of temperatures down to −50 °C.

scholarly journals Preparation of Synthetic Zeolites from Coal Fly Ash by Hydrothermal Synthesis

Materials ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1267
Author(s):  
David Längauer ◽  
Vladimír Čablík ◽  
Slavomír Hredzák ◽  
Anton Zubrik ◽  
Marek Matik ◽  
...  
Keyword(s):  
Fly Ash ◽  
Coal Combustion ◽  
Power Plants ◽  
Coal Fly Ash ◽  
Thermal Power ◽  
Product Analysis ◽  
Coal Combustion Products ◽  
X Ray ◽  
Wide Range ◽  
Silica Alumina

Large amounts of coal combustion products (as solid products of thermal power plants) with different chemical and physical properties cause serious environmental problems. Even though coal fly ash is a coal combustion product, it has a wide range of applications (e.g., in construction, metallurgy, chemical production, reclamation etc.). One of its potential uses is in zeolitization to obtain a higher added value of the product. The aim of this paper is to produce a material with sufficient textural properties used, for example, for environmental purposes (an adsorbent) and/or storage material. In practice, the coal fly ash (No. 1 and No. 2) from Czech power plants was firstly characterized in detail (X-ray diffraction (XRD), X-ray fluorescence (XRF), scanning electron microscopy with energy dispersive X-ray analysis (SEM-EDX), particle size measurement, and textural analysis), and then it was hydrothermally treated to synthetize zeolites. Different concentrations of NaOH, LiCl, Al2O3, and aqueous glass; different temperature effects (90–120 °C); and different process lengths (6–48 h) were studied. Furthermore, most of the experiments were supplemented with a crystallization phase that was run for 16 h at 50 °C. After qualitative product analysis (SEM-EDX, XRD, and textural analytics), quantitative XRD evaluation with an internal standard was used for zeolitization process evaluation. Sodalite (SOD), phillipsite (PHI), chabazite (CHA), faujasite-Na (FAU-Na), and faujasite-Ca (FAU-Ca) were obtained as the zeolite phases. The content of these zeolite phases ranged from 2.09 to 43.79%. The best conditions for the zeolite phase formation were as follows: 4 M NaOH, 4 mL 10% LiCl, liquid/solid ratio of 30:1, silica/alumina ratio change from 2:1 to 1:1, temperature of 120 °C, process time of 24 h, and a crystallization phase for 16 h at 50 °C.

scholarly journals Vector boson fusion at multi-TeV muon colliders

2020 ◽  
Vol 2020 (9) ◽  
Author(s):  
Antonio Costantini ◽  
Federico De Lillo ◽  
Fabio Maltoni ◽  
Luca Mantani ◽  
Olivier Mattelaer ◽  
...  
Keyword(s):  
Cross Sections ◽  
Vector Boson ◽  
High Energy ◽  
New Physics ◽  
Vector Boson Fusion ◽  
Weak Boson ◽  
Wide Range ◽  
Lepton Colliders ◽  
Muon Colliders ◽  
New Phenomena

Abstract High-energy lepton colliders with a centre-of-mass energy in the multi-TeV range are currently considered among the most challenging and far-reaching future accelerator projects. Studies performed so far have mostly focused on the reach for new phenomena in lepton-antilepton annihilation channels. In this work we observe that starting from collider energies of a few TeV, electroweak (EW) vector boson fusion/scattering (VBF) at lepton colliders becomes the dominant production mode for all Standard Model processes relevant to studying the EW sector. In many cases we find that this also holds for new physics. We quantify the size and the growth of VBF cross sections with collider energy for a number of SM and new physics processes. By considering luminosity scenarios achievable at a muon collider, we conclude that such a machine would effectively be a “high-luminosity weak boson collider,” and subsequently offer a wide range of opportunities to precisely measure EW and Higgs couplings as well as discover new particles.

scholarly journals The Growth of Semiconductor Thin Films Studied by RHEED

1990 ◽  
Vol 43 (5) ◽  
pp. 583
Author(s):  
GL Price
Keyword(s):  
Thin Films ◽  
Surface Science ◽  
High Vacuum ◽  
High Energy ◽  
Ultra High Vacuum ◽  
Large Area ◽  
Growth Modes ◽  
Semiconductor Thin Films ◽  
Wide Range ◽  
Recent Developments

Recent developments in the growth of semiconductor thin films are reviewed. The emphasis is on growth by molecular beam epitaxy (MBE). Results obtained by reflection high energy electron diffraction (RHEED) are employed to describe the different kinds of growth processes and the types of materials which can be constructed. MBE is routinely capable of heterostructure growth to atomic precision with a wide range of materials including III-V, IV, II-VI semiconductors, metals, ceramics such as high Tc materials and organics. As the growth proceeds in ultra high vacuum, MBE can take advantage of surface science techniques such as Auger, RHEED and SIMS. RHEED is the essential in-situ probe since the final crystal quality is strongly dependent on the surface reconstruction during growth. RHEED can also be used to calibrate the growth rate, monitor growth kinetics, and distinguish between various growth modes. A major new area is lattice mismatched growth where attempts are being made to construct heterostructures between materials of different lattice constants such as GaAs on Si. Also described are the new techniques of migration enhanced epitaxy and tilted superlattice growth. Finally some comments are given On the means of preparing large area, thin samples for analysis by other techniques from MBE grown films using capping, etching and liftoff.

Extension of the Combustion Stability Range in Dry Low NOx Lean Premixed Gas Turbine Combustor Using a Fuel Rich Annular Pilot Burner

2014 ◽  
Vol 136 (5) ◽  
Author(s):  
L. Rosentsvit ◽  
Y. Levy ◽  
V. Erenburg ◽  
V. Sherbaum ◽  
V. Ovcharenko ◽  
...  
Keyword(s):  
Gas Turbine ◽  
Combustion Zone ◽  
Combustion Instability ◽  
Experimental Results ◽  
Nox Emission ◽  
Combustion Stability ◽  
Stability Range ◽  
Numerical Effort ◽  
Lean Premixed ◽  
Pilot Burner

The present work is concerned with improving combustion stability in lean premixed (LP) gas turbine combustors by injecting free radicals into the combustion zone. The work is a joint experimental and numerical effort aimed at investigating the feasibility of incorporating a circumferential pilot combustor, which operates under rich conditions and directs its radicals enriched exhaust gases into the main combustion zone as the means for stabilization. The investigation includes the development of a chemical reactors network (CRN) model that is based on perfectly stirred reactors modules and on preliminary CFD analysis as well as on testing the method on an experimental model under laboratory conditions. The study is based on the hypothesis that under lean combustion conditions, combustion instability is linked to local extinctions of the flame and consequently, there is a direct correlation between the limiting conditions affecting combustion instability and the lean blowout (LBO) limit of the flame. The experimental results demonstrated the potential reduction of the combustion chamber's LBO limit while maintaining overall NOx emission concentration values within the typical range of low NOx burners and its delicate dependence on the equivalence ratio of the ring pilot flame. A similar result was revealed through the developed CHEMKIN-PRO CRN model that was applied to find the LBO limits of the combined pilot burner and main combustor system, while monitoring the associated emissions. Hence, both the CRN model, and the experimental results, indicate that the radicals enriched ring jet is effective at stabilizing the LP flame, while keeping the NOx emission level within the characteristic range of low NOx combustors.

Sign in / Sign up

Export Citation Format

Share Document