scholarly journals The formation of different Mg-Al LDHs (Mg/Al=2:1) under hydrothermal conditions and their application for Zn2+ ions removal

2014 ◽  
Vol 46 (1) ◽  
pp. 95-106 ◽  
Author(s):  
A. Bankauskaite ◽  
K. Baltakys
Keyword(s):  
Crystal Structure ◽  
Chemical Nature ◽  
Simultaneous Thermal Analysis ◽  
X Ray Diffraction ◽  
Hydrothermal Conditions ◽  
X Ray ◽  
Ion Removal ◽  
Ft Ir ◽  
Scanning Electron ◽  
Hydroxide Hydrate

The formation of different Mg-Al LDHs (Mg/Al = 2:1) under hydrothermal conditions (200?C; 4-24 h) was investigated in the 4MgCO3?Mg(OH)2?5H2O - ?-Al2O3/Al(OH)3 - H2O and Mg5(CO3)4(OH)2?4H2O - ?-Al2O3 - H2O systems. It was determined that chemical nature of the initial Mg containing components changes the formation mechanism of the synthesis products during isothermal curing. Magnesium aluminum hydroxide hydrate is crystallized by using 4MgCO3?Mg(OH)2?5H2O as starting material while hydroxide hydrate in the Mg5(CO3)4(OH)2?4H2O presence. The sequence of the compounds formation is presented. It should be noted that different modifications of Al containing components have only a slight influence on the meixnerite-type LDH hydrothermal synthesis. It was determined that after 45 min of sorption all Zn2+ ions are incorporated into the crystal structure of hydrotalcite. It should be underlined that crystallinity of the latter compound do not change during ion exchange experiments. Thus, the latter compound can be used as adsorbent for Zn2+ ion removal. Synthesized samples were characterized by powder X-Ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), simultaneous thermal analysis (STA) and scanning electron microscopy (SEM).

Synthesis of Zeolite X from Bentonite via Hydrothermal Method

2020 ◽  
Vol 990 ◽  
pp. 144-148
Author(s):  
Suphada Srilai ◽  
Worapak Tanwongwal ◽  
Kobchai Onpecth ◽  
Thanapat Wongkitikun ◽  
Kollayut Panpiemrasda ◽  
...  
Keyword(s):  
Crystal Structure ◽  
Hydrothermal Method ◽  
The Other ◽  
X Ray Diffraction ◽  
Zeolite X ◽  
Sem Images ◽  
X Ray ◽  
Ft Ir ◽  
Scanning Electron

Zeolite X were successfully synthesized from bentonite from Lopburi province, in Thailand using the two-step of hydrothermal method under optimum condition without calcination. The first step of hydrothermal were obtained at 200 °C for 3 h to remove unreacted impurity minerals such as quartz and muscovite. The secondary step of hydrothermal were obtained at 90 °C for 120 h for synthesis of zeolite X. The characterization of zeolite X were examined by x-ray diffraction (XRD), scanning electron microscopy (SEM), and infrared spectroscopy (FT-IR), respectively. The crystal structure of product was determined as zeolite X by XRD. The morphology of SEM images for zeolite X is octahedral shape. FTIR spectra are in accordance with the other characterization results.

Crystal Structure and Optical Spectra of Er:NaLaxYb9-x(SiO4)6O2 (x=0,3,5,7,9) Crystals Prepared through a Hydrothermal Routine

2009 ◽  
Vol 79-82 ◽  
pp. 1711-1714
Author(s):  
Wen Yan Zhang ◽  
Chun Hua Lu ◽  
Ya Ru Ni ◽  
Yan Zhang ◽  
Zhong Zi Xu ◽  
...  
Keyword(s):  
Crystal Structure ◽  
Apatite Structure ◽  
X Ray Diffraction ◽  
Hydrothermal Conditions ◽  
Hexagonal System ◽  
X Ray ◽  
Subsequent Calcination ◽  
Nano Rods ◽  
First Time ◽  
Scanning Electron

For the first time, nano-scale rods of NaLaxYb9-x(SiO4)6O2 (x=1,3,5,7,9) crystals (NLS) activated with Er3+ have been synthesized through a mild hydrothermal conditions with subsequent calcination. The as-obtained products were characterized by the X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FTIR). The results indicate that the compound has an apatite structure and crystallizes in the hexagonal system, space group P63/m. The excitation spectrum and emission spectrum were also emplyed to investigate the optical properties of the nano-rods. The Er3+ doped NLS exhibit green/red up-conversion luminescence under excitation with a diode laser at 980 nm.

scholarly journals An investigation of polyhedral deformation in two mixed-metal diarsenates: SrZnAs2O7and BaCuAs2O7

2015 ◽  
Vol 71 (4) ◽  
pp. 330-337 ◽  
Author(s):  
Sabina Kovač ◽  
Ljiljana Karanović ◽  
Tamara Đorđević
Keyword(s):  
Crystal Structure ◽  
Single Crystal ◽  
General Formula ◽  
Three Dimensional ◽  
X Ray Diffraction ◽  
Hydrothermal Conditions ◽  
X Ray ◽  
Open Framework ◽  
Geometrical Characteristics ◽  
Barium Copper

Two isostructural diarsenates, SrZnAs2O7(strontium zinc diarsenate), (I), and BaCuAs2O7[barium copper(II) diarsenate], (II), have been synthesized under hydrothermal conditions and characterized by single-crystal X-ray diffraction. The three-dimensional open-framework crystal structure consists of corner-sharingM2O5(M2 = Zn or Cu) square pyramids and diarsenate (As2O7) groups. Each As2O7group shares its five corners with five differentM2O5square pyramids. The resulting framework delimits two types of tunnels aligned parallel to the [010] and [100] directions where the large divalent nine-coordinatedM1 (M1 = Sr or Ba) cations are located. The geometrical characteristics of theM1O9,M2O5and As2O7groups of known isostructural diarsenates, adopting the general formulaM1IIM2IIAs2O7(M1II= Sr, Ba, Pb;M2II= Mg, Co, Cu, Zn) and crystallizing in the space groupP21/n, are presented and discussed.

A 2-D Zn(II) coordination polymer based on 4,5-imidazoledicarboxylate and bis(benzimidazole) ligands: synthesis, crystal structure and fluorescence properties

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Xinzhao Xia ◽  
Lixian Xia ◽  
Geng Zhang ◽  
Yuxuan Jiang ◽  
Fugang Sun ◽  
...  
Keyword(s):  
Crystal Structure ◽  
Coordination Polymer ◽  
Zigzag Chain ◽  
Supramolecular Framework ◽  
X Ray Diffraction ◽  
Hydrothermal Conditions ◽  
Hydrogen Bond Interaction ◽  
X Ray ◽  
New Type ◽  
Solid State Fluorescence

Abstract In this work, a new type of zinc(II) coordination polymer {[Zn(HIDC)(BBM)0.5]·H2O} n (Zn-CP) was synthesized using 4,5-imidazoledicarboxylic acid (H3IDC) and 2,2-(1,4-butanediyl)bis-1,3-benzimidazole (BBM) under hydrothermal conditions. Its structure has been characterized by infrared spectroscopy, elemental analysis and single crystal X-ray diffraction analysis. The Zn(II) ion is linked by the HIDC2− ligand to form a zigzag chain by chelating and bridging, and then linked by BBM to form a layered network structure. Adjacent layers are further connected by hydrogen bond interaction to form a 3-D supramolecular framework. The solid-state fluorescence performance of Zn-CP shows that compared with free H3IDC ligand, its fluorescence intensity is significantly enhanced.

X-ray powder diffraction data of LaNi0.5Ti0.45Co0.05O3, LaNi0.45Co0.05Ti0.5O3, and LaNi0.5Ti0.5O3 perovskites

2021 ◽  
pp. 1-6
Author(s):  
Mariana M. V. M. Souza ◽  
Alex Maza ◽  
Pablo V. Tuza
Keyword(s):  
Crystal Structure ◽  
Rietveld Method ◽  
Pechini Method ◽  
Powder Diffraction Data ◽  
X Ray Diffraction ◽  
Unit Cell Parameters ◽  
X Ray ◽  
Cell Parameters ◽  
Modified Pechini Method ◽  
Scanning Electron

In the present work, LaNi0.5Ti0.45Co0.05O3, LaNi0.45Co0.05Ti0.5O3, and LaNi0.5Ti0.5O3 perovskites were synthesized by the modified Pechini method. These materials were characterized using X-ray fluorescence, scanning electron microscopy, and powder X-ray diffraction coupled to the Rietveld method. The crystal structure of these materials is orthorhombic, with space group Pbnm (No 62). The unit-cell parameters are a = 5.535(5) Å, b = 5.527(3) Å, c = 7.819(7) Å, V = 239.2(3) Å3, for the LaNi0.5Ti0.45Co0.05O3, a = 5.538(6) Å, b = 5.528(4) Å, c = 7.825(10) Å, V = 239.5(4) Å3, for the LaNi0.45Co0.05Ti0.5O3, and a = 5.540(2) Å, b = 5.5334(15) Å, c = 7.834(3) Å, V = 240.2(1) Å3, for the LaNi0.5Ti0.5O3.

scholarly journals Enhanced apatite precipitation on a biopolymer-coated bioactive glass

2015 ◽  
Vol 1 (1) ◽  
Author(s):  
M. Araújo ◽  
M. Miola ◽  
A. Venturello ◽  
G. Baldi ◽  
J. Perez ◽  
...  
Keyword(s):  
Bioactive Glass ◽  
Body Fluid ◽  
Organic Coating ◽  
Medical Applications ◽  
Sintering Process ◽  
X Ray Diffraction ◽  
Ph Measurements ◽  
X Ray ◽  
Ft Ir ◽  
Scanning Electron

AbstractIn this work, sintered pellets of a silica-based bioactive glass were dip-coated with a biocompatible natural-derived polymer in order to investigate the influence of the organic coating on the glass bioactivity. After the sintering process optimization, uncoated and coated pellets have been characterized by means of scanning electron microscopy with energy dispersive spectroscopy (SEM, EDS), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) and pH measurements, after the immersion in a simulated body fluid (SBF). An increased apatite forming ability and a better control of the pH during soaking of the samples in SBF were observed in the presence of the biopolymer. This result opens a new insight on the simple fabrication of highly bioactive hybrid inorganic-organic materials for medical applications.

Mesenchymal Stem Cell Response to Surface Altered Porous Ti

2015 ◽  
Vol 638 ◽  
pp. 67-72
Author(s):  
Ana Maria Salantiu ◽  
Florin Popa ◽  
Petru Pascuta ◽  
Olga Soritau ◽  
Noemi Dirzu ◽  
...  
Keyword(s):  
Stem Cell ◽  
X Ray Diffraction ◽  
X Ray ◽  
Chemically Modified ◽  
Porous Ti ◽  
Average Porosity ◽  
Ft Ir ◽  
Cell Testing ◽  
Scanning Electron

This work aims to investigate the influence of surface conditioning of porous Ti for enhancing its biological activity, as assessed by in vitro stem cell testing. Porous Ti samples with an average porosity of 32% were processed by Powder Metallurgy with dextrin as a space holder. The samples were subjected to H2O2 treatment to form an enhanced TiO2 film, followed by a heat treatment at 400°C and 600°C aiming to the crystallization of the as-formed amorphous titanium oxide. Samples characterization was performed by Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FT-IR) and X-Ray Diffraction (XRD). The treated surfaces revealed to be made of both anatase and rutile TiO2, with groove–shaped structure and cracks on the surface of the TiO2 film. The intrinsic biocompatibility of the chemically modified porous Ti surfaces was assessed in vitro. In our cell culture tests, stem cells were found to attach and proliferate better on the chemically treated Ti surfaces compared to the control untreated Ti surfaces.

scholarly journals A Novel Strong Cyan Luminescence Emission of Tb2O3 Particles

2021 ◽  
Author(s):  
Fatma Unal
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Ammonium Carbonate ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
Terbium Oxide ◽  
X Ray ◽  
Ft Ir ◽  
Pl Emission ◽  
Scanning Electron

Abstract Terbium oxide (Tb2O3) particles (NPs) were synthesized by precipitation method using ammonium carbonate as precipitation agent. Effects of precursor molarity (0.1, 0.15 and 0.2 M) on photoluminescence (PL) behaviour of the NPs were investigated. The presence of the Tb2O3 phase was confirmed by X-Ray Diffraction (XRD) and Fourier-transform infrared spectroscopy (FT-IR) analyses. Morphological investigations of the produced powders were made by Field Emission Gun-Scanning Electron Microscopy (FEG-SEM). It showed that the morphology of Tb2O3 particles transformed from the nanograin chain to bundles morphology of rod-like as the amount of precursor molarity increased. Emission spectrum were investigated by Photoluminescence (PL) Spectroscopy. All the Tb2O3 particles exhibited the strongest peak at 493 nm ascribed to 5D4-7F6 (magnetic dipole (MD), C2) transition. The increase in the number of C2 sites released from the MD transition with the increase of the precursor molarity caused a negative increase in the b* (yellowness/blueness of the emission) value in the CIE diagram, indicating that the colour shifted to the blue region. The Tb2O3 particles produced by the precipitation method exhibited novel strong cyan colour and the PL emission intensity increased with increasing molarity.

Preparation and Photocatalytic Properties of Rod-Shaped TiO2 Based on Salix Fiber

2014 ◽  
Vol 609-610 ◽  
pp. 250-254
Author(s):  
Ya Bin Li ◽  
Jin Tian Huang ◽  
Yan Fei Pan
Keyword(s):  
Photocatalytic Performance ◽  
Sol Gel ◽  
Average Diameter ◽  
X Ray Diffraction ◽  
Nanocomposite Structure ◽  
X Ray ◽  
Infrared Spectrometer ◽  
Ft Ir ◽  
Degradation Of Methyl Orange ◽  
Scanning Electron

In the paper, the TiO2nanomaterials adopted the microcrystalline cellulose as the template by the template method and sol-gel method was prepared. Through the infrared spectrometer (FT-IR), scanning electron microscope (SEM), X-ray diffraction (XRD), the surface morphology, composition and the type of the samples were characterized respectively. The influence of the macro morphology of TiO2photocatalytic performance to use the reaction of decolorization and degradation of methyl orange as model was analyzed. The results showed that TiO2which was produced by the template of sallix fiber was Rod-shaped and the average diameter size of nanocomposite structure was 20.592 nm, which can provide a new method of producing other morphology of TiO2.

Study on the Properties of Doped La in BaBi4Ti4O15 Ceramic

2007 ◽  
Vol 26-28 ◽  
pp. 243-246
Author(s):  
Xing Hua Yang ◽  
Jin Liang Huang ◽  
Xiao Wang ◽  
Chun Wei Cui
Keyword(s):  
Crystal Structure ◽  
Grain Size ◽  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Sintering Temperature ◽  
Solid Phase ◽  
X Ray Diffraction ◽  
X Ray ◽  
Lanthanum Content ◽  
Scanning Electron

BaBi4-xLaxTi4O15 (BBLT) ceramics were prepared by conventional solid phase sintering ceramics processing technology. The crystal structure and the microstructure were detected by X-ray diffraction (XRD) and scanning electron microscope (SEM). The XRD analyses show that La3+ ions doping did not change the crystal structure of BBT ceramics. The sintering temperature increased from 1120°C to 1150°C with increasing Lanthanum content from 0 to 0.5, but it widened the sintering temperature range from 20°C to 50°C and refined the grain size of the BBT ceramic. Additionally, polarization treatment was performed and finally piezoelectric property was measured. As a result, the piezoelectric constant d33 of the 0.1at.% doped BBLT ceramics reached its highest value about 22pc/N at polarizing electric field of 8kV/mm and polarizing temperature of 120°C for 30min.

Sign in / Sign up

Export Citation Format

Share Document