INFLUENCE OF FORCED CONVECTION IN LIQUID INSIDE THE TIN ON DURATION OF STERILIZATION IN THE COURSE OF FISH PROCESSING

2017 ◽  
pp. 137-144
Author(s):  
Gennadiy Valentinovich Alexeev ◽  
Elena Igorevna Verboloz
Keyword(s):  
High Temperature ◽  
Liquid Phase ◽  
Forced Convection ◽  
Thermal Process ◽  
Processing Time ◽  
Fish Processing ◽  
Study Results ◽  
Equipment Modernization ◽  
Bottom To Top

The article focuses on the process of intensive mixing of liquid phase in the tin during high-temperature sterilization, i.e. sterilization when temperature of the heat carrier reaches 150-160°C. It has been stated that for intensification of the thermal process during sterilization of tinned fish with liquid filling it is preferable to turn a tin from bottom to top. This operation helps to increase the driving power of the process and to shorten warming time. Besides, high-temperature sterilization carried out according to experimental modes, where the number of tin turnovers is calculated, greatly shortens processing time and improves quality of the product. In this case there is no superheating, all tins are evenly heated. The study results will contribute to equipment modernization and to preserving valuable food qualities.

Research on High-Temperature Properties of Typical Iron Ores Used in China and its Blending Optimization

2011 ◽  
Vol 201-203 ◽  
pp. 1780-1786 ◽  
Author(s):  
Sheng Li Wu ◽  
Oliveira Dauter ◽  
Yu Ming Dai ◽  
Jian Xu ◽  
Hong Chen
Keyword(s):  
High Temperature ◽  
Liquid Phase ◽  
Iron Ore ◽  
Experimental Results ◽  
Iron Ores ◽  
High Temperature Properties ◽  
Bonding Phase ◽  
Low Levels

High-temperature properties of 10 samples of iron ore from Brazil, Australia and China were measured. Several conclusions were made based on these experimental results. Assimilability of Brazilian ore, Australian ore and Chinese ore concentrate were low, high and medium, respectively. Optimal fluidity of liquid phase was observed in 2 types of Brazilian ores (BR-B, BR-C), 1 type of Australian ore (AU-C) and 1 type of Chinese ore (CH-D). For self-strength of the bonding phase, Australian ore presented low levels, while Brazilian and Chinese ore presented high levels. According to the experimental results of high-temperature properties of iron ore, schemes of ore blending optimization were designed and sinter pot test using these blends were performed. The results indicated that ore blends composed of 30~45% Brazilian ores + 25~50% Australian ores + 20~30% Chinese concentrates presented excellent sintering results, considering both the performance of the processing and quality of the sinter. Therefore this experiment has proved that ore blending optimization combining high temperature properties can lead to more efficient sintering mixes.

Lightweight Aggregate Made of Desulfurized Fly Ash and Bottom Ash after Magnetic Separation

2012 ◽  
Vol 174-177 ◽  
pp. 1450-1454
Author(s):  
Yoo Taek Kim ◽  
Seung Gu Kang ◽  
Chang Sam Kim
Keyword(s):  
High Temperature ◽  
Liquid Phase ◽  
Sintering Temperature ◽  
Raw Materials ◽  
Bottom Ash ◽  
Lightweight Aggregate ◽  
Core Region ◽  
The Other ◽  
Black Core

This research provides a comparison of ALAs which was made up of two different raw materials, that is, MDFA and MDBA which were produced from fluidized bed type boiler of power plant and then magnetically separated. ALAs made up of MDFA had too much liquid phase at high temperature; on the other hand, those made up of MDBA showed a black core region as well as good distribution of various sizes of pores inside ALA. Although a good quality of ALA can be made of MDBA only, the optimum composition was obtained under the conditions of MDBA:DS=5:5 and at 1200°C. Nonetheless for its high sintering temperature, MDBA is a prospective recycling material for making lightweight aggregate.

Penatalaksanaan IMD pada Ibu Postpartum Sectio Caesarea Mempengaruhi Status Gizi dan Kecepatan Produksi ASI

2020 ◽  
Vol 2 (2) ◽  
pp. 112-120
Author(s):  
Nursari Abdul Syukur ◽  
Susi Purwanti
Keyword(s):  
Breast Milk ◽  
Nutritional Status ◽  
Milk Production ◽  
Quantitative Research ◽  
Milk Protein ◽  
Sectio Caesarea ◽  
Control Group ◽  
P Value ◽  
Study Results

Many mothers who give birth to Sectio Caesarea (SC) do not Initiate Early Breastfeeding (IMD), which fails exclusive breastfeeding. This study aimed to determine the effect of IMD management in postpartum SC mothers on nutritional status, speed of milk production, and quality of breast milk protein. Method: quantitative research with quasi approach experiment. The research design used was a pre-post-test control non-equivalent control group. A sampling of this study used the Consecutive method sampling with a sample of 20 mothers who gave birth by cesarean section (SC). Hypothesis testing uses the independent t-test and the Mann-Whitney test. The study results showed an influence on the management of IMD in postpartum SC mothers on the speed of ASI production (p-value=0.004) and nutritional status (p-value=0.028). There was no effect of IMD management on postpartum SC mothers on the quality of breast milk protein (p-value = 0.543). This study recommends that the hospital implement an IMD promotion program before the abdominal wall is closed as a form of intervention to increase milk production and maternal nutritional status

Studi fortifikasi hidrolisat protein udang rebon (mysis relicta) pada mie sagu

2020 ◽  
Vol 6 (1) ◽  
pp. 039
Author(s):  
Trie Omitha Purba ◽  
Suparmi Suparmi ◽  
Dahlia Dahlia
Keyword(s):  
Experimental Method ◽  
Proximate Composition ◽  
Protein Hydrolysate ◽  
Quality Standards ◽  
Processing Technology ◽  
Fish Processing ◽  
Mysis Relicta ◽  
Marine Chemistry ◽  
Randomized Design

The study aimed to determine the effect of rebon shirmp (mysis relicta) protein hydrolisate fortification to the sago noodles and to observe the characteristics of the sago noodles produced. The research was carried on in February – April 2019 in the  Laboratory of Fish Processing Technology, Integrated Laboratories, and the Fisheries and Marine Chemistry Laboratories at the Universitas Riau. The method used was the experimental method, designedas a non-factorial complete randomized design. The treatment conducted was addingof rebon shrimp protein hydrolysate at 4 level concentrations (0%, 5%, 10% dan 15%). The variables assessed were the quality of organoleptic (appearance, texture, odor, flavor) and the proximate composition. The results showed that the proteinhydrolysate of rebon shrimp at concentration of 15% was the best treatment and in accordance to the quality standards of dried noodles (SNI 01-2974-1996), indicated bythe highest organoleptic qualityof the dried noodles produced, including: the appearance that was brown, less attractive, whole, less neat; the texture that was dry and compact; the aroma that was quite fragrant, spesific rebon shrimp; and the taste that was quite tasty and shrimp flavored. The proximate composition ofthe best product was presented by the content of moisture, ash, fat, protein, and carbohydrate at 7.55%,1.02%, 0.17%, 16.76%, and 74.49%, respectively.Keywords: Hydrolysate protein, rebon shrimp, sago noodles

Would you be more satisfied with your life if you travel more frequently?

2020 ◽  
Author(s):  
Chun-Chu Chen ◽  
Sui-Wen (Sharon) Zou ◽  
James F. Petrick
Keyword(s):  
Quality Of Life ◽  
Relevant Information ◽  
Life Domain ◽  
Travel And Tourism ◽  
Study Results ◽  
Personal Importance

This research intends to examine whether frequent travelers are more satisfied with their life as well as why these individuals travel more frequently than others. Derived from a sample of 500 Taiwanese respondents, the study results show that respondents attaching personal importance to tourism are more likely to gather travel-relevant information, resulting in more frequent travels. It is also found that frequent travelers are more satisfied with their life. These findings suggest that travel and tourism can be an important life domain affecting how people evaluate their overall quality of life.

Effect of high temperature stress on seed filling and nutritional quality of rice (Oryza sativa L.)

2020 ◽  
Vol 16 (2) ◽  
pp. 18-23
Author(s):  
K. PRAVALLIKA ◽  
C. ARUNKUMAR ◽  
A. VIJAYKUMAR ◽  
R. BEENA ◽  
V. G. JAYALEKSHMI
Keyword(s):  
Oryza Sativa ◽  
High Temperature ◽  
Temperature Stress ◽  
Nutritional Quality ◽  
High Temperature Stress ◽  
Seed Filling

Crystallization of Isotactic Poly(propylene) in Solution as Followed by Slow Calorimetry

1995 ◽  
Vol 60 (11) ◽  
pp. 1905-1924 ◽  
Author(s):  
Hong Phuong-Nguyen ◽  
Geneviève Delmas
Keyword(s):  
Molecular Weight ◽  
Crystal Growth ◽  
High Temperature ◽  
Heat Of Fusion ◽  
Complete Dissolution ◽  
Polymer Molecular Weight ◽  
Solvent Quality ◽  
Temperature Ramp ◽  
Poly Propylene

Dissolution, crystallization and second dissolution traces of isotactic poly(propylene) have been obtained in a slow temperature ramp (3 K h-1) with the C80 Setaram calorimeter. Traces of phase-change, in presence of solvent, are comparable to traces without solvent. The change of enthalpy on heating or cooling, ∆Htotal, over the 40-170 °C temperature range, is the sum of two contributions, ∆HDSC and ∆Hnetwork. The change ∆HDSC is the usual heat obtained in a fast temperature ramp and ∆Hnetwork is associated with a physical network whose disordering is slow and subject to superheating due to strain. When dissolution is complete, ∆Htotal is equal to ∆H0, the heat of fusion of perfect crystals. The values of ∆Htota for nascent and recrystallized samples are compared. Dissolution is the tool to evaluate the quality of the crystals. The repartition of ∆Htotal, into the two endotherms, reflects the quality of crystals. The crystals grown more rapidly have a higher fraction of network crystals which are stable at high T in the solvents. A complete dissolution, i.e. a high temperature (170 °C or more) is necessary to obtain good crystals. The effect of concentration, polymer molecular weight and solvent quality on crystal growth is analyzed.

High-temperature properties of liquid-phase-sintered α-SiC

2000 ◽  
Vol 282 (1-2) ◽  
pp. 109-114 ◽  
Author(s):  
Robert P. Jensen ◽  
William E. Luecke ◽  
Nitin P. Padture ◽  
Sheldon M. Wiederhorn
Keyword(s):  
High Temperature ◽  
Liquid Phase ◽  
High Temperature Properties

scholarly journals Investigation of the Heteroepitaxial Process Optimization of Ge Layers on Si (001) by RPCVD

Nanomaterials ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 928
Author(s):  
Yong Du ◽  
Zhenzhen Kong ◽  
Muhammet Toprak ◽  
Guilei Wang ◽  
Yuanhao Miao ◽  
...  
Keyword(s):  
High Temperature ◽  
Buffer Layer ◽  
Layer Thickness ◽  
Growth Temperature ◽  
Crystalline Quality ◽  
Initial Growth ◽  
Two Dimensional ◽  
High Quality ◽  
Reduced Pressure

This work presents the growth of high-quality Ge epilayers on Si (001) substrates using a reduced pressure chemical vapor deposition (RPCVD) chamber. Based on the initial nucleation, a low temperature high temperature (LT-HT) two-step approach, we systematically investigate the nucleation time and surface topography, influence of a LT-Ge buffer layer thickness, a HT-Ge growth temperature, layer thickness, and high temperature thermal treatment on the morphological and crystalline quality of the Ge epilayers. It is also a unique study in the initial growth of Ge epitaxy; the start point of the experiments includes Stranski–Krastanov mode in which the Ge wet layer is initially formed and later the growth is developed to form nuclides. Afterwards, a two-dimensional Ge layer is formed from the coalescing of the nuclides. The evolution of the strain from the beginning stage of the growth up to the full Ge layer has been investigated. Material characterization results show that Ge epilayer with 400 nm LT-Ge buffer layer features at least the root mean square (RMS) value and it’s threading dislocation density (TDD) decreases by a factor of 2. In view of the 400 nm LT-Ge buffer layer, the 1000 nm Ge epilayer with HT-Ge growth temperature of 650 °C showed the best material quality, which is conducive to the merging of the crystals into a connected structure eventually forming a continuous and two-dimensional film. After increasing the thickness of Ge layer from 900 nm to 2000 nm, Ge surface roughness decreased first and then increased slowly (the RMS value for 1400 nm Ge layer was 0.81 nm). Finally, a high-temperature annealing process was carried out and high-quality Ge layer was obtained (TDD=2.78 × 107 cm−2). In addition, room temperature strong photoluminescence (PL) peak intensity and narrow full width at half maximum (11 meV) spectra further confirm the high crystalline quality of the Ge layer manufactured by this optimized process. This work highlights the inducing, increasing, and relaxing of the strain in the Ge buffer and the signature of the defect formation.

scholarly journals High-Temperature Short-Time and Holder Pasteurization of Donor Milk: Impact on Milk Composition

Life ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 114
Author(s):  
Diana Escuder-Vieco ◽  
Juan M. Rodríguez ◽  
Irene Espinosa-Martos ◽  
Nieves Corzo ◽  
Antonia Montilla ◽  
...  
Keyword(s):  
High Temperature ◽  
Human Milk ◽  
Milk Composition ◽  
Donor Human Milk ◽  
High Temperature Short Time ◽  
Lactose Concentration ◽  
C 30 ◽  
Milk Banks ◽  
Short Time

Holder pasteurization (HoP; 62.5 °C, 30 min) is commonly used to ensure the microbiological safety of donor human milk (DHM) but diminishes its nutritional properties. A high-temperature short-time (HTST) system was designed as an alternative for human milk banks. The objective of this study was to evaluate the effect of this HTST system on different nutrients and the bile salt stimulated lipase (BSSL) activity of DHM. DHM was processed in the HTST system and by standard HoP. Macronutrients were measured with a mid-infrared analyzer. Lactose, glucose, myo-inositol, vitamins and lipids were assayed using chromatographic techniques. BSSL activity was determined using a kit. The duration of HTST treatment had a greater influence on the nutrient composition of DHM than did the tested temperature. The lactose concentration and the percentage of phospholipids and PUFAs were higher in HTST-treated than in raw DHM, while the fat concentration and the percentage of monoacylglycerides and SFAs were lower. Other nutrients did not change after HTST processing. The retained BSSL activity was higher after short HTST treatment than that following HoP. Overall, HTST treatment resulted in better preservation of the nutritional quality of DHM than HoP because relevant thermosensitive components (phospholipids, PUFAs, and BSSL) were less affected.

Sign in / Sign up

Export Citation Format

Share Document