scholarly journals Utilization of Lime Sludge Activated by Salt in Egyptian Expansive Soil Improvement

2021 ◽  
Vol 9 (2) ◽  
Author(s):  
Carmen M. Sharaby ◽  
Mohie Eldin M. El mashad ◽  
Mona A. Fakhry ◽  
Marwa H. Salama
Keyword(s):  
Expansive Soils ◽  
Expansive Soil ◽  
Soil Improvement ◽  
Liquid Limit ◽  
Engineering Properties ◽  
Chloride Salt ◽  
Industrial Solid Waste ◽  
Positive Effects ◽  
Lime Sludge ◽  
The Impact

Expansive soils are active clays which cause engineering problems all over the world. This research deals with the impact of lime sludge (LS) as industrial solid waste from sugar-cane factory and sodium chloride salt (NaCl) on engineering properties of expansive soil. In this research, an analytical study of chemical and physical properties of Egyptian expansive soil in Sixth of October City was made as a case study. The laboratory results showed improvement of chemical, microstructural properties and thus the engineering properties of this soil. The results of chemical analysis showed the ability of soil to improve pH; soil alkalinity raise to the required level of stabilization. After soil treatment, Microstructure scanning electron with energy dispersive spectroscopy (SEM-EDX) analyses showed that new cementitious compounds are formed and soil was changed from a weak dispersed structure to strong flocculated structure. It was also observed by increasing LS and NaCl concentrations the plastic limit increased and the liquid limit decreased, hence decreased plasticity index; the rate of soil free swelling is decreased due to change of expansive soil texture. Therefore, lime sludge activated by NaCl has positive effects on engineering properties of soil. By this way we protect the environment from industrial solid wastes.  

scholarly journals A Review on Expansive Soils Stabilized with Different Pozzolanic Materials

2022 ◽  
Vol 28 (1) ◽  
pp. 1-18
Author(s):  
Ahmed Al-Kalili ◽  
Ahmed S. Ali ◽  
Abbas J. Al-Taie
Keyword(s):  
Expansive Soils ◽  
Expansive Soil ◽  
High Volume ◽  
Engineering Properties ◽  
Collapsible Soil ◽  
Calcined Clay ◽  
Wide Range ◽  
Pozzolanic Materials ◽  
Materials Used ◽  
Furnace Slag

Soils that cause effective damages to engineer structures (such as pavement and foundation) are called problematic or difficult soils (include collapsible soil, expansive soil, etc.). These damages occur due to poor or unfavorited engineering properties, such as low shear strength, high compressibility, high volume changes, etc. In the case of expansive soil, the problem of the shrink-swell phenomenon, when the soil reacts with water, is more pronounced. To overcome such problems, soils can be treated or stabilized with many stabilization ways (mechanical, chemical, etc.). Such ways can amend the unfavorited soil properties. In this review, the pozzolanic materials have been selected to be presented and discussed as chemical stabilizers. The selected pozzolanic materials are traditional, industrial, or byproducts, ashes of agricultural wastes, and calcined-clay types. They are lime, cement, blast furnace slag, fly ash, silica fume, rice husk ash, sugarcane straw ash, egg ash, coconut husk ash, and metakaolin. In general, the stabilization of expansive soils with pozzolanic materials has an essential impact on swelling and Atterberg-limits and positively affects compaction and strength parameters. However, there is a wide range for the percentages of pozzolanic materials used as stabilizers. The content (15% to 20%) is the most ratios of the stabilizers used as an optimal percentage, and beyond this ratio, the addition of the pozzolanic materials produces an undesirable effect.

scholarly journals Effect of Compaction Energy on Engineering Properties of Expansive Soil

2017 ◽  
Vol 3 (8) ◽  
pp. 610 ◽  
Author(s):  
Sadam Hussain
Keyword(s):  
Expansive Soils ◽  
Energy Levels ◽  
Expansive Soil ◽  
Substantial Improvement ◽  
Engineering Properties ◽  
Engineering Structures ◽  
Expansive Clays ◽  
Swell Potential ◽  
Compaction Energy ◽  
Strength And Deformation

Swelling of expansive clays is one of the great hazards, a foundation engineer encounters. Each year expansive soils cause severe damage to residences, buildings, highways, pipelines, and other civil engineering structures. Strength and deformation parameters of soils are normally related to soil type and moisture. However, surprisingly limited focus has been directed to the compaction energy applied to the soil. Study presented herein is proposed to examine the effect of varying compaction energy of the engineering properties i.e. compaction characteristics, unconfined compressive strength, California bearing ratio and swell percentage of soil. When compaction energy increased from 237 KJ/m3 to 1197 KJ/m3, MDD increased from 1.61 g/cm3 to 1.75 g/cm3, OMC reduced from 31.55 percent to 21.63 percent, UCS increased from 110.8 to 230.6 KPa, and CBR increased from mere 1 percent to 10.2 percent. Results indicate substantial improvement in these properties. So, compacting soil at higher compaction energy levels can provide an effective approach for stabilization of expansive soils up to a particular limit. But if the soil is compacted more than this limit, an increase in swell potential of soil is noticed due to the reduction in permeability of soil.

scholarly journals Investigation on the performance of ‘Fino’ materials to stabilize expansive soil: A case study in Yeka Sub-City, Addis Ababa, Ethiopia

2021 ◽  
Vol 6 (2) ◽  
pp. 044-050
Author(s):  
Tsion Mindaye ◽  
Emer Tucay Quezon ◽  
Temesgen Ayna
Keyword(s):  
Soil Stabilization ◽  
Addis Ababa ◽  
Research Result ◽  
Expansive Soil ◽  
Liquid Limit ◽  
Engineering Properties ◽  
Natural State ◽  
Dry Density ◽  
Maximum Dry Density ◽  
Proctor Test

Expansive soil swells when it is wet, and it will shrink when it dries. Due to this behavior of the soil, the strength and other properties of soil are inferior. To improve its properties, it is necessary to stabilize the soil with different stabilizers. Soil stabilization is a process to treat the soil to maintain, alter, or improve expansive soil performance. In this study, the potential of 'Fino' as stabilizing additive to expansive soil was investigated for the improving engineering properties of expansive soil to be used as subgrade material. The evaluation involved the determination of the Free Swell test, CBR test, Atterberg's limits, and the Proctor test of expansive soil in its natural state as well as when mixed with varying proportions of 'Fino.' The practices were performed on six proportions 5%, 10%, 15%, 20%, 25% and 30 % with expansive soil. The research result indicated a considerable reduction in Swelling, and the Maximum dry Density of soil was improved. Optimum moisture content decreased in increasing 'Fino.' At 30% of 'Fino,' the CBR values of expansive soil increased from 1.06% to 5.94%, Liquid Limit decreased from 95.2% to 29.4%, plasticity index decreased from 57.24% to 17.82% and the degree of expansion of the natural subgrade soil has reduced from "very high to medium." Hence, it is concluded that the 'Fino' at 30% has shown significant improvement in the expansive soil's engineering properties meeting the ERA and AASHTO Standard specifications requirements for road subgrade material.

Utilization of Mosul City Demolition Waste to Improve some Soil Engineering Properties

2020 ◽  
Vol 857 ◽  
pp. 374-382
Author(s):  
Omar K. Mohialdeen ◽  
Suhail I.A. Khattab ◽  
Kossay K. Al-Ahmady
Keyword(s):  
Los Angeles ◽  
Expansive Soil ◽  
Liquid Limit ◽  
Engineering Properties ◽  
Demolition Waste ◽  
Optimum Water Content ◽  
Stabilized Soil ◽  
The University ◽  
Compaction Properties ◽  
Optimum Water

The present research has been conducted to trace the various effects of Mosul city demolition waste materials (DMs), on the geotechnical properties of clay. The properties of the samples have already been investigated and evaluated. Moreover, cement has been added to upgrade these properties. Finally, the fine demolition has been added to a highly expansive soil selected from the site of the University of Mosul to reduce the swelling potential. In fact, the experimental work includes: The Abrasion, index and compaction properties, swelling and strength of stabilized and treated expansive soil. The laboratory tests include the testing of consistency limits, unconfined compressive strength (UCS), compaction (standard and modified), swelling, consolidation, and Abrasion test by Los Angeles Machine. The Results show that, increasing the old and new demolition (OD and ND) percentages lead to a decrease of liquid limit and plasticity index of clay, respectively. The increase in maximum γdry for the clay has been noticed when the OD and ND content has been added from 5 to 25%. A reduction of optimum water content (opt) for clay was optimized also by increasing the demolitions percentage to 25%. Also, the UCS strength values of the clay have been increased by increasing the demolition materials (DMs) percentage from 5 to 25%. The odometer characteristics, including the swelling and consolidation of DMs-clay mixtures, were controlled mainly by the type of the demolition. The final result indicates that the presence of old and new demolition waste could improve the clay engineering properties of the stabilized soil. Untreated and cement treated (OD) and (ND) materials could be successfully used as a base or sub-base for road.

Effect of chemical stabilisation on index and engineering properties of a remoulded expansive soil

2021 ◽  
pp. qjegh2020-142
Author(s):  
E. Ramanjaneya Raju ◽  
B. R. Phanikumar ◽  
M. Heeralal
Keyword(s):  
Expansive Soil ◽  
Dry Weight ◽  
Liquid Limit ◽  
Strength Characteristics ◽  
Engineering Properties ◽  
Compaction Characteristics ◽  
Swell Index ◽  
Granulated Blast Furnace Slag ◽  
Free Swell ◽  
Furnace Slag

This note presents the effect of lime, cement, fly ash and ground granulated blast furnace slag (GGBS) on free swell index (FSI), liquid limit (LL), plasticity index (PI), compaction characteristics, hydraulic conductivity (k) and strength characteristics of an expansive soil. The effect of the above chemicals on California bearing ratio (CBR) was also presented. Lime content was varied as 0%, 1%, 2%, 4% and 6% and the amounts of other additives were varied as 0%, 5%, 10%, 15% and 20% by dry weight of the soil. FSI, LL and PI decreased significantly with increasing additive contents. Compaction characteristics also improved with increasing additive contents. Strength characteristics showed improvement at higher additive contents especially at higher curing periods. CBR (determined in soaked condition) also increased significantly with increasing additive contents.

Stabilization of black cotton soil by using cement, lime and rice husk in flexible pavements

2018 ◽  
Vol 7 (2.1) ◽  
pp. 24
Author(s):  
Sajja Satish ◽  
Shyam Prakash Koganti ◽  
Kommineni Hemantha Raja ◽  
Kaza Raaga Sai
Keyword(s):  
Rice Husk ◽  
Expansive Soil ◽  
Liquid Limit ◽  
Engineering Properties ◽  
Black Cotton Soil ◽  
Optimum Dose ◽  
Sieve Analysis ◽  
Construction Work ◽  
Subgrade Soil ◽  
Cbr Test

Expansive soil (Black cotton soil) is very weak and does not have enough stability for any type of construction work. To make the subgrade soil stable, by improving its engineering properties is very essential. In the present work, stabilization of subgrade soil by using Sand and Cement varying percentage of cement as 2%, 3%, 5% and constant percentage of sand by weight of soil, Rice Husk of 5%, 7%, 10%, and Lime is used to enhance the strength of subgrade soil. The purpose of this study is to determine the optimum dose of the stabilizer, which improves the strength and bearing capacity of soil less which is suitable for pavement structure. To evaluate the strength of soil, various tests have been performed such as Sieve analysis, Liquid limit, Plastic limit, Specific gravity, Compaction (OMC, MDD) and CBR test in the laboratory. The result shows that the use of the above materials in combination increases the California Bearing Ratio values (CBR). By using the CBR value the design of pavements to carry traffic in the range of 1 to 10 msa and 10 – 150 msa is calculated as per IRC: 37 – 2001.

scholarly journals Evaluation for the Leaching of Cr from Coal Gangue Using Expansive Soils

Processes ◽  
2019 ◽  
Vol 7 (8) ◽  
pp. 478 ◽  
Author(s):  
Yan Zhang ◽  
Hassan Baaj ◽  
Rong Zhao
Keyword(s):  
Heavy Metal ◽  
Compressive Strength ◽  
Unconfined Compressive Strength ◽  
Building Materials ◽  
Negative Impact ◽  
Expansive Soil ◽  
Coal Gangue ◽  
Engineering Properties ◽  
Leaching Behavior ◽  
The Impact

Coal gangue can cause significant heavy metal pollution in mining areas, which would have a negative impact on the environment and human health. The objective of this research is to investigate the relationship between expansive soil amount and the leaching behavior of Chromium from coal gangue and the engineering properties of coal gangue used as building materials. The leaching behavior of Chromium from coal gangue was observed using atomic absorption spectrometry. A column leaching experiment was conducted to examine the impact of leaching time and heavy metal concentration. Furthermore, the unconfined compressive strength test was employed to evaluate the engineering properties of coal gangue with expansive soil. The results of the study demonstrate that pH of leachate solutions, leaching time, and expansive soil amounts in mixtures have important influence on Chromium concentration. The leachate solutions, which behave like alkaline, provide a positive environment for adsorbing Cr. Adding expansive soil can reduce leached concentrations of Chromium from coal gangue when compared to leachate of original coal gangue. It was found that 30% expansive soil was an improved solution because it delayed the cumulative concentration to reach the limitation line. Moreover, the unconfined compressive strength of coal gangue was boosted through adding expansive soil.

Characterization and Effective Utilization of Volcanic Ash for Soil Improvement

2012 ◽  
Vol 248 ◽  
pp. 292-297 ◽  
Author(s):  
Ahmad Rifa’i ◽  
Noriyuki Yasufuku ◽  
Kiyoshi Omine
Keyword(s):  
Volcanic Ash ◽  
Soil Stabilization ◽  
Early Stage ◽  
Soft Soil ◽  
Physical And Mechanical Properties ◽  
Soil Improvement ◽  
Liquid Limit ◽  
Engineering Properties ◽  
Engineering Practice ◽  
Effective Utilization

Volcanic ash becomes environmental important issues as waste material if it is not effectively reduced or reused. In engineering practice, utilization of volcanic ash as substitution material is limited. Indonesia has a large road on soft soil and volcanic ash. The objectives of this paper are focused to study the characterization, classification and utilization of volcanic ash as soil stabilization material which give benefit in engineering practice and also be environmental friendly material. Engineering properties, mineral composition and soil mixture characteristics involve physical and mechanical properties are discussed. Result shows that the effect of addition of volcanic ash after curing time 14 days can improve the engineering properties of soft soil, decrease liquid limit, change curve of grain size distribution, increase bearing capacity, and decrease swelling potential. The soil-volcanic ash mixture with 35% of volcanic ash and 5% of lime is obtained as optimum mixture design. This result is still early stage and need further study.

scholarly journals Enhancement of Expansive Soil with Addition of Wood Husk Ash and Silica Fume

2019 ◽  
Vol 9 (2) ◽  
pp. 320-323
Keyword(s):  
Silica Fume ◽  
Soil Stabilization ◽  
Clay Soil ◽  
Clayey Soil ◽  
Expansive Soils ◽  
Chemical Properties ◽  
Expansive Soil ◽  
Wood Ash ◽  
Engineering Properties ◽  
Experimental Investigations

Soil is the foundation material which supports loads from an overlying structure; it mainly consists of minerals, organic matter, liquids etc. In India the soil most present is Clay, using which the construction of sub grade is deemed problematic. as Clayey soils are expansive soils. The problem of using clayey soil for civil engineering constructions has been observed since early ages.. On the basis of type of soil, soil stabilization is undertaken and is a major technology in construction engineering. Soil strengthening refers to the process of enhancing physical, chemical and mechanical properties of soil to maintain its stability. In this investigation, an attempt has been made to improve the engineering properties of locally available clayey soil near Mahabalipuram by making a composite mix with silica fume and wood ash with equal composition in various proportions. Addition of such materials will increase the physical as well as chemical properties of the soil. study, experimental investigations are carried out to study the beneficial effects of stabilizing Clay soil using silica fume and wood ash with 3%, 5% and 7%. The tests were conducted in order to evaluate the improvement in strength characteristics of the sub graded soil. The parameters tested included the Atterberg limits, Modified Proctor Density, California bearing ratio (CBR). Results showed that the geotechnical parameters of clay soil improved substantially by the addition of wood husk ash and silica fume

scholarly journals Investigation on the performance of ‘Fino’ materials to stabilize expansive soil: A case study in Yeka Sub City, Addis Ababa, Ethiopia

2021 ◽  
Author(s):  
Emer Tucay Quezon ◽  
Tsion Mindaye
Keyword(s):  
Soil Stabilization ◽  
Addis Ababa ◽  
Research Result ◽  
Expansive Soil ◽  
Liquid Limit ◽  
Engineering Properties ◽  
Natural State ◽  
Dry Density ◽  
Maximum Dry Density ◽  
Proctor Test

Expansive soil swells when it is wet, and it will shrink when it dries. Due to this behavior of the soil, the strength and other properties of soil are inferior. To improve its properties, it is necessary to stabilize the soil with different stabilizers. Soil stabilization is a process to treat the soil to maintain, alter, or improve expansive soil performance. In this study, the potential of 'Fino' as stabilizing additive to expansive soil was investigated for the improving engineering properties of expansive soil to be used as subgrade material. The evaluation involved the determination of the Free Swell test, CBR test, Atterberg's limits, and the Proctor test of expansive soil in its natural state as well as when mixed with varying proportions of 'Fino.' The practices were performed on six proportions 5%, 10%, 15%, 20%, 25% and 30 % with expansive soil. The research result indicated a considerable reduction in Swelling, and the Maximum dry Density of soil was improved. Optimum moisture content decreased in increasing 'Fino.' At 30% of 'Fino,' the CBR values of expansive soil increased from 1.06% to 5.94%, Liquid Limit decreased from 95.2% to 29.4%, plasticity index decreased from 57.24% to 17.82% and the degree of expansion of the natural subgrade soil has reduced from "very high to medium." Hence, it is concluded that the 'Fino' at 30% has shown significant improvement in the expansive soil's engineering properties meeting the ERA and AASHTO Standard specifications requirements for road subgrade material.

Sign in / Sign up

Export Citation Format

Share Document