scholarly journals Isokinetic Strength of Rotators, Flexors and Hip Extensors is Strongly Related to Front Kick Dynamics in Military Professionals

2019 ◽  
Vol 68 (1) ◽  
pp. 145-155
Author(s):  
Michal Vagner ◽  
Jan Malecek ◽  
Luboš Tomšovský ◽  
Petr Kubový ◽  
Andrea Levitova ◽  
...  
Keyword(s):  
Lower Limb ◽  
Impact Force ◽  
Isokinetic Dynamometry ◽  
Main Condition ◽  
Impact Forces ◽  
Hip Flexion ◽  
Limb Flexion ◽  
Hip Rotation ◽  
Kicking Performance ◽  
Flexion And Extension

AbstractAchieving the maximum possible impact force of the front kick can be related to the isokinetic lower limb muscle strength. Therefore, we aimed to determine the regression model between kicking performance and the isokinetic peak net moment of hip rotators, flexors, and hip extensors and flexors at various speeds of contraction. Twenty-five male soldiers (27.7 ± 7.2 yrs, 83.8 ± 6.1 kg, 180.5 ± 6.5 cm) performed six barefoot front kicks, where impact forces (N) and kick velocity (m∙s-1) were measured. The 3D kinematics and isokinetic dynamometry were used to estimate the kick velocity, isokinetic moment of kicking lower limb hip flexors and extensors (60, 120, 240, 300°∙s-1), and stance lower limb hip internal and external rotators (30, 90°∙s-1). Multiple regression showed that a separate component of the peak moment concentric hip flexion and extension of the kicking lower limb at 90°∙s-1 can explain 54% of the peak kicking impact force variance (R2 = 0.54; p < 0.001). When adding the other 3 components of eccentric and concentric hip internal and external rotations at 30°∙s-1, the internal and external hip rotation ratios at 30°∙s-1 on the stance limb and the concentric ratio of kicking limb flexion and extension at 300°∙s-1 that explained the variance of impact force were 75% (p = 0.003). The explosive strength of kicking limb hip flexors and extensors is the main condition constraint for kicking performance. The maximum strength of stance limb internal and external rotators and speed strength of kicking limb hip flexors and extensors are important constraints of kicking performance that should be considered to improve the front kick efficiency.

Effect of Upper and Lower Extremity Control Strategies on Predicted Injury Risk During Simulated Forward Falls: A Study in Healthy Young Adults

2008 ◽  
Vol 130 (4) ◽  
Author(s):  
JiaHsuan Lo ◽  
James A. Ashton-Miller
Keyword(s):  
Kinetic Energy ◽  
Injury Risk ◽  
Impact Force ◽  
The Body ◽  
Whole Body ◽  
Joint Control ◽  
Negative Work ◽  
Impact Forces ◽  
Hip Flexion ◽  
The Impact

Fall-related wrist fractures are common at any age. We used a seven-link, sagittally symmetric, biomechanical model to test the hypothesis that systematically alterations in the configuration of the body during a forward fall from standing height can significantly influence the impact force on the wrists. Movement of each joint was accomplished by a pair of agonist and antagonist joint muscle torque actuators with assigned torque-angle, torque-velocity, and neuromuscular latency properties. Proportional-derivative joint controllers were used to achieve desired target body segment configurations in the pre- and∕or postground contact phases of the fall. Outcome measures included wrist impact forces and whole-body kinetic energy at impact in the best, and worst, case impact injury risk scenarios. The results showed that peak wrist impact force ranged from less than 1kN to more than 2.5kN, reflecting a fourfold difference in whole-body kinetic energy at impact (from less than 40J to more than 160J) over the range of precontact hip and knee joint angles used at impact. A reduction in the whole-body kinetic energy at impact was primarily associated with increasing negative work associated with hip flexion. Altering upper extremity configuration prior to impact significantly reduced the peak wrist impact force by up to 58% (from 919Nto2212N). Increased peak wrist impact forces associated greater shoulder flexion and less elbow flexion. Increasing postcontact arm retraction can reduce the peak wrist impact force by 28% (from 1491Nto1078N), but postcontact hip and knee rotations had a relatively small effect on the peak wrist impact force (8% reduction; from 1411Nto1303N). In summary, the choice of the joint control strategy during a forward fall can significantly affect the risk of wrist injury. The most effective strategy was to increase the negative work during hip flexion in order to dissipate kinetic energy thereby reducing the loss in potential energy prior to first impact. Extended hip or elbow configurations should be avoided in order to reduce forearm impact forces.

Identification of the most effective muscles in landing impact forces

2021 ◽  
pp. 175433712110324
Author(s):  
Marzieh Mojaddarasil ◽  
Mohammad Jafar Sadigh ◽  
Sayed Jalal Zahabi
Keyword(s):  
Lower Limb ◽  
Muscle Activation ◽  
Impact Force ◽  
Experimental Tests ◽  
The Body ◽  
Promising Tool ◽  
Impact Forces ◽  
Drop Landing ◽  
The Impact

The aim of this study was to evaluate the role of the main lower limb muscles in increasing or decreasing each lower limb joint impact force during drop landing. To do so, the body was modeled by a four-link musculoskeletal model consisting of eight main Hill-type muscles. Different drop landing scenarios were modeled by changing the activation levels of the considered muscles. In each landing simulation, the impact GRF and impact joint forces were obtained. In order to compare and rank the muscles with respect to their effect on each impact force, a computationally feasible zero-one (off-on) muscle activation analysis was proposed. The proposed approach revealed important features regarding the relation between different impact forces and muscle activations. Specifically, the results can be interpreted in terms of the role that each muscle potentially plays in causing or preventing certain injuries. Moreover, the results obtained from the analysis were further used to classify the muscles into four categories, depending on the effect they have on each impact force. The proposed theoretical analysis is seen to be a promising tool in predicting the role of muscles and their order of importance in the generation of lower limb impact forces in landing, without the need for experimental tests.

Legal Update: North Dakota Supreme Court: Third Edition of Guides is “Most Current”

1999 ◽  
Vol 4 (1) ◽  
pp. 6-7
Author(s):  
James J. Mangraviti
Keyword(s):  
Internal Rotation ◽  
External Rotation ◽  
Measurement Techniques ◽  
Fourth Edition ◽  
Hip Motion ◽  
The Difference ◽  
The Right ◽  
Hip Flexion ◽  
Hip Rotation ◽  
Hip Extension

Abstract The accurate measurement of hip motion is critical when one rates impairments of this joint, makes an initial diagnosis, assesses progression over time, and evaluates treatment outcome. The hip permits all motions typical of a ball-and-socket joint. The hip sacrifices some motion but gains stability and strength. Figures 52 to 54 in AMA Guides to the Evaluation of Permanent Impairment (AMA Guides), Fourth Edition, illustrate techniques for measuring hip flexion, loss of extension, abduction, adduction, and external and internal rotation. Figure 53 in the AMA Guides, Fourth Edition, illustrates neutral, abducted, and adducted positions of the hip and proper alignment of the goniometer arms, and Figure 52 illustrates use of a goniometer to measure flexion of the right hip. In terms of impairment rating, hip extension (at least any beyond neutral) is irrelevant, and the AMA Guides contains no figures describing its measurement. Figure 54, Measuring Internal and External Hip Rotation, demonstrates proper positioning and measurement techniques for rotary movements of this joint. The difference between measured and actual hip rotation probably is minimal and is irrelevant for impairment rating. The normal internal rotation varies from 30° to 40°, and the external rotation ranges from 40° to 60°.

Influence of Attached Masses on Impact Forces and Running Style in Heel-Toe Running

1987 ◽  
Vol 3 (3) ◽  
pp. 264-275 ◽  
Author(s):  
Alexander Bahlsen ◽  
Benno M. Nigg
Keyword(s):  
Body Mass ◽  
High Speed ◽  
Impact Force ◽  
Force Plate ◽  
The Body ◽  
Additional Mass ◽  
Impact Forces ◽  
Running Shoes ◽  
High Speed Film ◽  
Vertical Impact

Impact forces analysis in heel-toe running is often used to examine the reduction of impact forces for different running shoes and/or running techniques. Body mass is reported to be a dominant predictor of vertical impact force peaks. However, it is not evident whether this finding is only true for the real body mass or whether it is also true for additional masses attached to the body (e.g., running with additional weight or heavy shoes). The purpose of this study was to determine the effect of additional mass on vertical impact force peaks and running style. Nineteen subjects (9 males, 10 females) with a mean mass of 74.2 kg/56.2 kg (SD = 10.0 kg and 6.0 kg) volunteered to participate in this study. Additional masses were attached to the shoe (.05 and .1 kg), the tibia (.2, .4, .6 kg), and the hip (5.9 and 10.7 kg). Force plate measurements and high-speed film data were analyzed. In this study the vertical impact force peaks, Fzi, were not affected by additional masses, the vertical active force peaks, Fza, were only affected by additional masses greater than 6 kg, and the movement was only different in the knee angle at touchdown, ϵ0, for additional masses greater than .6 kg. The results of this study did not support findings reported earlier in the literature that body mass is a dominant predictor of external vertical impact force peaks.

The Effects of Upstream Flexible Barrier on the Debris Flow Entrainment and Impact Dynamics on a Terminal Barrier

2021 ◽  
Author(s):  
Hervé Vicari ◽  
C.W.W. Ng ◽  
Steinar Nordal ◽  
Vikas Thakur ◽  
W.A. Roanga K. De Silva ◽  
...  
Keyword(s):  
Debris Flow ◽  
Debris Flows ◽  
Impact Force ◽  
Dynamic Pressure ◽  
Pressure Coefficient ◽  
Flexible Barrier ◽  
Impact Forces ◽  
Flexible Barriers ◽  
The Impact ◽  
Bed Entrainment

The destructive nature of debris flows is mainly caused by flow bulking from entrainment of an erodible channel bed. To arrest these flows, multiple flexible barriers are commonly installed along the predicted flow path. Despite the importance of an erodible bed, its effects are generally ignored when designing barriers. In this study, three unique experiments were carried out in a 28 m-long flume to investigate the impact of a debris flow on both single and dual flexible barriers installed in a channel with a 6 m-long erodible soil bed. Initial debris volumes of 2.5 m<sup>3</sup> and 6 m<sup>3</sup> were modelled. For the test setting adopted, a small upstream flexible barrier before the erodible bed separates the flow into several surges via overflow. The smaller surges reduce bed entrainment by 70% and impact force on the terminal barrier by 94% compared to the case without an upstream flexible barrier. However, debris overflowing the deformed flexible upstream barrier induces a centrifugal force that results in a dynamic pressure coefficient that is up to 2.2 times higher than those recommended in guidelines. This suggests that although compact upstream flexible barriers can be effective for controlling bed entrainment, they should be carefully designed to withstand higher impact forces.

scholarly journals Comparison of branded rugby headguards on their effectiveness in reducing impact on the head

2018 ◽  
Vol 4 (1) ◽  
pp. e000361 ◽  
Author(s):  
Erin R A Frizzell ◽  
Graham P Arnold ◽  
Weijie Wang ◽  
Rami J Abboud ◽  
Tim S Drew
Keyword(s):  
Impact Force ◽  
Linear Acceleration ◽  
Baseline Measurement ◽  
Peak Acceleration ◽  
Impact Forces ◽  
Impact Attenuation ◽  
The Mean ◽  
Force Reduction ◽  
The Right ◽  
The Impact

AimTo compare the available brands of rugby headguards and evaluate their impact attenuation properties at various locations on the cranium, with regard to concussion prevention.MethodsSeven different branded headguards were fitted onto a rigid headform and drop-tested in three different positions. An accelerometer measured the linear acceleration the headform experienced on impact with the ground. Each test involved dropping the headform from a height that generated 103.8 g on average when bare, which is the closest acceleration to the upper limit of the concussion threshold of 100 g. A mean peak acceleration for each drop position was calculated and compared with the bare baseline measurement.ResultsEach headguard demonstrated a significant decrease in the mean peak acceleration from the baseline value (all p≤0.01). Overall the Canterbury Ventilator was the most effective headguard, decreasing the impact force on average by 47%. The least effective was the XBlades Elite headguard, averaging a force reduction of 27%. In five of the seven headguards, the right side of the headwear was the most effective at reducing impact force.ConclusionOverall, the results indicate that it would be beneficial to wear a headguard during rugby in order to reduce the impact forces involved in head collisions. There was also a clear difference in performance between the tested brands, establishing the Canterbury headguard as the most effective. However, only one model of headguard from each brand was tested, so further research evaluating all other models should be considered.

scholarly journals STUDY ON IMPACT FORCES OF THE UNDERWATER CAVITY PROJECTILE

2016 ◽  
Vol 54 (6) ◽  
pp. 797
Author(s):  
Nguyen Thai Dung ◽  
Nguyen Duc Thuyen
Keyword(s):  
Drag Force ◽  
Impact Force ◽  
Center Of Mass ◽  
Forward Direction ◽  
Cavity Wall ◽  
Impact Point ◽  
Impact Forces ◽  
Underwater Projectile ◽  
The Impact ◽  
Cavity Effect

The motion of the underwater projectile with cavity effect including two motions: the projectile moves in the forward direction, center of mass of the projectile rotation around its nose makes tail of the projectile impacts on the cavity wall. According to, the impact forces occur, they include the drag force at its none, the impact force at impact point. The paper studies the forces occur on during motion of the underwater cavity projectile. Added, this paper considers the effect of the length and distributive projectile to the magnitude of impact force and the drag force of the underwater cavity projectile.

Analysis of Parameters Affecting Impact Force Attenuation during Landing in Human Vertical Free Fall

1982 ◽  
Vol 11 (3) ◽  
pp. 141-147 ◽  
Author(s):  
J Mizrahi ◽  
Z Susak
Keyword(s):  
Early Phase ◽  
Impact Force ◽  
Body Position ◽  
Free Fall ◽  
Muscle Action ◽  
Impact Forces ◽  
Ground Roll ◽  
Vertical Landing

The characteristics of impact forces on the legs during vertical landing of human vertical free fall in different falling conditions were studied to reveal the parameters which take part in the attenuation of these impact forces. The following parameters were investigated: body position during landing, range of flexion of the joints of the legs at impact, usage of ground-roll immediately after impact and softness of the ground. The results indicate that joint movements and muscle action play a major role in reducing peak forces during landing. This emphasizes the importance of adequate training to improve the pre-programmed non-reflex muscle action, necessary in the early phase of impact.

scholarly journals The functional use of the reciprocal hip mechanism during gait for paraplegic patients walking in the Louisiana State University reciprocating gait orthosis

1999 ◽  
Vol 23 (2) ◽  
pp. 152-162 ◽  
Author(s):  
P. M. Dall ◽  
B. Müller ◽  
I. Stallard ◽  
J. Edwards ◽  
M. H. Granat
Keyword(s):  
Hip Joint ◽  
Swing Phase ◽  
Spinal Injuries ◽  
Small Contribution ◽  
State University ◽  
Hip Joints ◽  
Cable Tension ◽  
Louisiana State University ◽  
Hip Flexion ◽  
Limb Flexion

Reciprocally linked orthoses used for paraplegic walking have some form of linkage between the two hip joints. It has been assumed that flexion of the swinging leg is driven by extension of the stance leg. The aims of this study were to investigate the moments generated around the hip joint by the two cables in a Louisiana State University Reciprocating Gait Orthosis (LSU-RGO). Six (6) subjects were recruited from the Regional Spinal Injuries Centre at Southport, who were experienced RGO users. The cables were fitted with strain gauged transducers to measure cable tension. Foot switches were used to divide the gait into swing and stance phases. A minimum of 20 steps were analysed for each subject. Moments about the hip joint for each phase of gait were calculated. There were no moments generated by the front cable in 4 of the subjects. In only 2 subjects did the cable generate a moment that could assist hip flexion during the swing phase. These moments were very low and at best could only have made a small contribution to limb flexion. The back cable generated moments that clearly prevented bilateral flexion. It was concluded that the front cable, as used by these experienced RGO users, did not aid flexion of the swinging limb.

Sign in / Sign up

Export Citation Format

Share Document