scholarly journals Building Information Modeling for Housing Renovation - Example for Ukraine

2019 ◽  
Vol 27 (2) ◽  
pp. 97-107 ◽  
Author(s):  
Nikolai Siniak ◽  
Sabina Źróbek ◽  
Vsevolod Nikolaiev ◽  
Sergey Shavrov
Keyword(s):  
Facility Management ◽  
Information Modeling ◽  
Information Support ◽  
Eastern European ◽  
Engineering Construction ◽  
Information Models ◽  
Building Information ◽  
Eastern European Countries ◽  
Tool Building ◽  
Documentation Tool

Abstract Building Information Modelling (BIM) is the latest software technology used widely by many construction businesses - big and small - particularly within the Architecture Engineering Construction (AEC) sector. Besides being a design and documentation tool, building information models (BIM) provide a platform for enhanced knowledge base collaboration, the potential to manage modification, and therefore the capability to provide information support throughout the lifecycle of an apartment building. A big share of the eastern European construction industries remains excluded from BIM technology and the potential advantages it will hand over to their business, particularly for renovation projects. It requies the involvement of all stakeholders to realize higher-level coordination, productivity, visualization and value efficiencies. The advantages of BIM exploitation for renovation projects are considered in the article. Tendencies in the development of BIM technologies throughout the globe and in eastern European countries on example of Ukraine are shown. Examples of the exploitation of local building information systems in realizing renovation processes are given, and proposals for policymakers in terms of applying BIM technologies in housing renovation activities and facility management are formulated.

scholarly journals BIM, GIS and semantic models of cultural heritage buildings

2016 ◽  
Vol 15 (2) ◽  
pp. 27-42 ◽  
Author(s):  
Pavel Tobiáš
Keyword(s):  
Cultural Heritage ◽  
Facility Management ◽  
Engineering Construction ◽  
Additional Information ◽  
Current State ◽  
Information Models ◽  
Building Information ◽  
Heritage Buildings ◽  
3D Information ◽  
Gis Software

<p>Even though there has been a great development of using building information models in the AEC (Architecture/Engineering/Construction) sector recently, creation of models of existing buildings is still not very usual. The cultural heritage documentation is still, in most cases, kept in the form of 2D drawings while these drawings mostly contain only geometry without semantics, attributes or definitions of relationships and hierarchies between particular building elements. All these additional information would, however, be very providential for the tasks of cultural heritage preservation, i.e. for the facility management of heritage buildings or for reconstruction planning and it would be suitable to manage all geometric and non-geometric information in a single 3D information model. This paper is based on the existing literature and focuses on the historic building information modelling to provide information about the current state of the art. First, a summary of available software tools is introduced while not only the BIM tools but also the related GIS software is considered. This is followed by a review of existing efforts worldwide and an evaluation of the facts found.</p>

A scan to as-built building information modeling workflow: a case study in Malaysia

2019 ◽  
Vol 18 (4) ◽  
pp. 923-940
Author(s):  
Abdul Rahman Ahsan Usmani ◽  
Abdalrahman Elshafey ◽  
Masoud Gheisari ◽  
Changsaar Chai ◽  
Eeydzah Binti Aminudin ◽  
...  
Keyword(s):  
Laser Scanning ◽  
Building Information Modeling ◽  
Laser Scanner ◽  
Facility Management ◽  
Information Modeling ◽  
Content Type ◽  
Information Models ◽  
Building Information ◽  
Building Information Models

Purpose Three dimensional (3 D) laser scanner surveying is widely used in many fields, such as agriculture, mining and heritage documentation and can be of great benefit for as-built documentation in construction and facility management domains. However, there is lack of applied research and use cases integrating 3 D laser scanner surveying with building information modeling (BIM) for existing facilities in Malaysia. This study aims to develop a scan to as-built BIM workflow to use 3 D laser scanner surveying and create as-built building information models of an existing complex facility in Malaysia. Design/methodology/approach A case study approach was followed to develop a scan to as-built BIM workflow through four main steps: 3 D laser scanning, data preprocessing, data registration and building information modeling. Findings This case study proposes a comprehensive scan to as-built BIM workflow which illustrates all the required steps to create a precise 3 D as-built building information model from scans. This workflow was successfully implemented to the Eco-Home facility at the Universiti Teknologi Malaysia. Originality/value Scan to as-built BIM is a digital alternative to manual and tedious process of documentation of as-built condition of a facility and provides a detail process using laser scans to create as-built building information models of facilities.

Life Cycle of Construction Objects at Information Simulation of Buildings and Structures

2019 ◽  
pp. 65-72 ◽  
Keyword(s):  
Life Cycle ◽  
Construction Projects ◽  
Life Cycle Management ◽  
Information Modeling ◽  
Sources Of Information ◽  
Logical Scheme ◽  
Modeling Technology ◽  
Information Models ◽  
Building Information ◽  
The Russian Federation

The variants of the division of the life cycle of a construction object at the stages adopted in the territory of the Russian Federation, as well as in other countries are considered. Particular attention is paid to the exemplary work plan – "RIBA plan of work", used in England. A feature of this document is its applicability in the information modeling of construction projects (Building information Modeling – BIM). The article presents a structural and logical scheme of the life cycle of a building object and a list of works that are performed using information modeling technology at various stages of the life cycle of the building. The place of information models in the process of determining the service life of the building is shown. On the basis of the considered sources of information, promising directions for the development of the life cycle management system of the construction object (Life Cycle Management) and the development of the regulatory framework in order to improve the use of information modeling in construction are given.

scholarly journals BIM-Based Digital Twin and XR Devices to Improve Maintenance Procedures in Smart Buildings: A Literature Review

2021 ◽  
Vol 11 (15) ◽  
pp. 6810
Author(s):  
Corentin Coupry ◽  
Sylvain Noblecourt ◽  
Paul Richard ◽  
David Baudry ◽  
David Bigaud
Keyword(s):  
Academic Research ◽  
Facility Management ◽  
Information Modeling ◽  
Application Framework ◽  
Remote Collaboration ◽  
Smart Buildings ◽  
Digital Twin ◽  
Industrial Sectors ◽  
M Phase ◽  
Building Information

In recent years, the use of digital twins (DT) to improve maintenance procedures has increased in various industrial sectors (e.g., manufacturing, energy industry, aerospace) but is more limited in the construction industry. However, the operation and maintenance (O&M) phase of a building’s life cycle is the most expensive. Smart buildings already use BIM (Building Information Modeling) for facility management, but they lack the predictive capabilities of DT. On the other hand, the use of extended reality (XR) technologies to improve maintenance operations has been a major topic of academic research in recent years, both through data display and remote collaboration. In this context, this paper focuses on reviewing projects using a combination of these technologies to improve maintenance operations in smart buildings. This review uses a combination of at least three of the terms “Digital Twin”, “Maintenance”, “BIM” and “Extended Reality”. Results show how a BIM can be used to create a DT and how this DT use combined with XR technologies can improve maintenance operations in a smart building. This paper also highlights the challenges for the correct implementation of a BIM-based DT combined with XR devices. An example of use is also proposed using a diagram of the possible interactions between the user, the DT and the application framework during maintenance operations.

scholarly journals Development of the structure and composition of a building information classifier towards the application of BIM technologies

Vestnik MGSU ◽  
2020 ◽  
pp. 867-906 ◽  
Author(s):  
Vladimir A. Volkodav ◽  
Ivan A. Volkodav
Keyword(s):  
Construction Industry ◽  
Construction Projects ◽  
Life Cycles ◽  
Classification Systems ◽  
Information Modeling ◽  
Information Classification ◽  
Technical Requirements ◽  
Information Models ◽  
Building Information ◽  
The One

Abstract Introduction. Various building information classification systems are used internationally; their critical analysis makes it possible to highlight basic requirements applicable to the Russian classifier and substantiate its structure and composition. Materials and methods. Modern international building information classification systems, such as OmniClass (USA), Uniclass 2015 (UK), CCS (Denmark), and CoClass (Sweden), are considered in the article. Their structure, composition, methodological fundamentals are analyzed. In addition to international classification systems, Russian construction information classifiers are analyzed. Results. The structure of a building information classifier has been developed and tailored to the needs of BIM (building information modeling) and national regulatory and technical requirements. The classifier’s structure complies with the one recommended by ISO 12006-2:2015. Its composition has regard to the requirements that apply to the aggregation and unification of Russian classifiers, and it also benefits from the classifiers developed for and used by the construction industry. The proposed building information classifier has four basic categories and 21 basic classes. Conclusions. The proposed structure and composition of a building information classifier represent a unified and universal tool for communicating building information or presenting it in the standardized format in the consolidated information space designated for information models needed to manage life cycles of major construction projects.

SIGA3D

2012 ◽  
pp. 806-828 ◽  
Author(s):  
Clément Mignard ◽  
Christophe Nicolle
Keyword(s):  
Geometric Modeling ◽  
Structural Heterogeneity ◽  
Facility Management ◽  
Information Modeling ◽  
Semantic Heterogeneity ◽  
Remote Server ◽  
Gis Data ◽  
Building Information ◽  
Collaborative Platform ◽  
Lifecycle Management

The interoperability of Information Systems has been a research topic for over thirty years. While some forms of heterogeneity have been settled by the adoption of standards, some domains, such as the Urban Information Modeling (UIM), require specific research. The UIM combines information from the domain of Building Information Modeling (BIM) with Geographic Information System (GIS) within a collaborative platform. Using this platform, a set of heterogeneous actors takes part in the lifecycle of the urban environment through a 3D digital model. This ambition is faced with several gaps such as resolution of semantic heterogeneity in the lifecycle management system, the resolution of structural heterogeneity between 2D geo-referenced modeling and 3D geometric modeling, or problem solving scalability for real-time 3D display from a remote server for managing a real environment of several million square meters. In this chapter, the authors present the SIGA3D European Project trying to overcome these obstacles into a Web collaborative platform combining BIM and GIS data and processes for Urban Facility Management.

GREEN BUILDING AND BIODIVERSITY: FACILITATING BIRD FRIENDLY DESIGN WITH BUILDING INFORMATION MODELS

2016 ◽  
Vol 11 (2) ◽  
pp. 116-130 ◽  
Author(s):  
Karen Kensek ◽  
Ye Ding ◽  
Travis Longcore
Keyword(s):  
Building Materials ◽  
Green Building ◽  
Building Design ◽  
Visual Programming ◽  
Information Modeling ◽  
Indoor Environmental Quality ◽  
Information Models ◽  
Building Information ◽  
The Impact ◽  
Bird Collisions

Green buildings should respect nature and endeavor to mitigate harmful effects to the environment and occupants. This is often interpreted as creating sustainable sites, consuming less energy and water, reusing materials, and providing excellent indoor environmental quality. Environmentally friendly buildings should also consider literally the impact that they have on birds, millions of them. A major factor in bird collisions with buildings is the choice of building materials. These choices are usually made by the architect who may not be aware of the issue or may be looking for guidance from certification programs such as LEED. As a proof of concept for an educational tool, we developed a software-assisted approach to characterize whether a proposed building design would earn a point for the LEED Pilot Credit 55: Avoiding Bird Collisions. Using the visual programming language Dynamo with the common building information modeling software Revit, we automated the assessment of designs. The approach depends on parameters that incorporate assessments of bird threat for façade materials, analyzes building geometry relative to materials, and processes user input on building operation to produce the assessment.

scholarly journals A three-step process for reporting progress in detail engineering using BIM, based on experiences from oil and gas projects

2019 ◽  
Vol 26 (4) ◽  
pp. 648-667 ◽  
Author(s):  
Øystein Mejlænder-Larsen
Keyword(s):  
Construction Projects ◽  
Oil And Gas ◽  
Case Study Research ◽  
Oil And Gas Industry ◽  
Information Modeling ◽  
Content Type ◽  
Step Process ◽  
Information Models ◽  
Building Information ◽  
Building Information Models

Purpose Traditionally, progress in detail engineering in construction projects is reported based on estimates and manual input from the disciplines in the engineering team. Reporting progress on activities in an engineering schedule manually, based on subjective evaluations, is time consuming and can reduce accuracy, especially in larger and multi-disciplinary projects. How can progress in detail engineering be reported using BIM and connected to activities in an engineering schedule? The purpose of this paper is to introduce a three-step process for reporting progress in detail engineering using building information modeling (BIM) to minimize manual reporting and increase quality and accuracy. Design/methodology/approach The findings of this paper are based on the studies of experiences from the execution of projects in the oil and gas industry. Data are collected from an engineering, procurement and construction (EPC) contractor and two engineering contractors using case study research. Findings In the first step, control objects in building information models are introduced. Statuses are added to control objects to fulfill defined quality levels related to milestones. In the second step, the control objects with statuses are used to report visual progress and aggregated in an overall progress report. In the third step, overall progress from building information models are connected to activities in an engineering schedule. Originality/value Existing research works related to monitoring and reporting progress using a BIM focus on construction and not on detail engineering. The research demonstrates that actual progress in detail engineering can be visualized and reported through the use of BIM and extracted to activities in an engineering schedule through a three-step process.

scholarly journals Automatically Generating a MEP Logic Chain from Building Information Models with Identification Rules

2019 ◽  
Vol 9 (11) ◽  
pp. 2204 ◽  
Author(s):  
Ya-Qi Xiao ◽  
Sun-Wei Li ◽  
Zhen-Zhong Hu
Keyword(s):  
Data Structure ◽  
Topological Analysis ◽  
Failure Detection ◽  
Facility Management ◽  
Graph Data ◽  
Information Models ◽  
Average Accuracy ◽  
Connection Table ◽  
Building Information ◽  
Building Information Models

In mechanical, electrical, and plumbing (MEP) systems, logic chains refer to the upstream and downstream connections between MEP components. Generating the logic chains of MEP systems can improve the efficiency of facility management (FM) activities, such as locating components and retrieving relevant maintenance information for prompt failure detection or for emergency responses. However, due to the amount of equipment and components in commercial MEP systems, manually creating such logic chains is tedious and fallible work. This paper proposes an approach to generate the logic chains of MEP systems using building information models (BIMs) semi-automatically. The approach consists of three steps: (1) the parametric and nonparametric spatial topological analysis within MEP models to generate a connection table, (2) the transformation of MEP systems and custom information requirements to generate the pre-defined and user-defined identification rules, and (3) the logic chain completion of MEP model based on the graph data structure. The approach was applied to a real-world project, which substantiated that the approach was able to generate logic chains of 15 MEP systems with an average accuracy of over 80%.

scholarly journals ABGS: A System for the Automatic Generation of Building Information Models from Two-Dimensional CAD Drawings

2020 ◽  
Vol 12 (17) ◽  
pp. 6713
Author(s):  
Youngsoo Byun ◽  
Bong-Soo Sohn
Keyword(s):  
Computer Aided Design ◽  
Low Cost ◽  
3D Models ◽  
Automatic Generation ◽  
Information Modeling ◽  
Two Dimensional ◽  
Efficient Design ◽  
Information Models ◽  
Building Information ◽  
Floor Plans

Building Information Modeling (BIM) refers to 3D-based digital modeling of buildings and infrastructure for efficient design, construction, and management. Governments have recognized and encouraged BIM as a primary method for enabling advanced construction technologies. However, BIM is not universally employed in industries, and most designers still use Computer-Aided Design (CAD) drawings, which have been used for several decades. This is because the initial costs for setting up a BIM work environment and the maintenance costs involved in using BIM software are substantially high. With this motivation, we propose a novel software system that automatically generates BIM models from two-dimensional (2D) CAD drawings. This is highly significant because only 2D CAD drawings are available for most of the existing buildings. Notably, such buildings can benefit from the BIM technology using our low-cost conversion system. One of the common problems in existing methods is possible loss of information that may occur during the process of conversion from CAD to BIM because they mainly focus on creating 3D geometric models for BIM by using only floor plans. The proposed method has an advantage of generating BIM that contains property information in addition to the 3D models by analyzing floor plans and other member lists in the input design drawings together. Experimental results show that our method can quickly and accurately generate BIM models from 2D CAD drawings.

Sign in / Sign up

Export Citation Format

Share Document