scholarly journals The Problems of Weed Management by Herbicide Systems Applied in Maize

2008 ◽  
Vol 48 (1) ◽  
pp. 119-128 ◽  
Author(s):  
Hanna Gołebiowska
Keyword(s):  
Weed Control ◽  
Weed Management ◽  
High Efficiency ◽  
Alluvial Soils ◽  
Western Region ◽  
Weed Species ◽  
Control Effectiveness ◽  
Herbicide Mixture ◽  
Weed Infestation ◽  
Anthemis Arvensis

The Problems of Weed Management by Herbicide Systems Applied in Maize Detailed recognition of weed infestation state and degree in south-western region of Poland provided the basis for starting field experiment on three types of soils aiming at the assessment of weed control effectiveness by means of suitably selected herbicide systems. High efficiency of weed elimination on alluvial soils was obtained due to herbicide mixture mesotrione + nicosulfuron in split doses. In the experiment established on brown soils the mentioned weed species were most satisfactorily controlled by herbicide mixture applied according to infestation degree: mesotrione + nicosulfuron i rimsulfuron + adjuvant + dicamba applied once in full doses. The mixture rimsulfuron + adjuvant + dicamba showed to be the most efficient regarding the weeds typical for alluvial soils, except for Elymus repens, numerously occurring in the experiment, which exhibited medium sesitivity, as well as winter forms of Anthemis arvensis. Mixture of rimsulfuron + adjuvant + florasulam + 2,4- D allowed to eliminate undesired plants on that soil stand in the most efficient way and to achieve the highest grain yield.

scholarly journals Weed Suppressive Ability of Cover Crop Mixtures Compared to Repeated Stubble Tillage and Glyphosate Treatments

Agriculture ◽  
2018 ◽  
Vol 8 (9) ◽  
pp. 144 ◽  
Author(s):  
Alexandra Schappert ◽  
Miriam Messelhäuser ◽  
Marcus Saile ◽  
Gerassimos Peteinatos ◽  
Roland Gerhards
Keyword(s):  
Weed Control ◽  
Weed Management ◽  
Cover Crop ◽  
Management Practice ◽  
Soil Tillage ◽  
Control Treatment ◽  
Weed Species ◽  
Deep Soil ◽  
Great Ability ◽  
Weed Infestation

The utilization of an effective stubble management practice can reduce weed infestation before and in the following main crop. Different strategies can be used, incorporating mechanical, biological, and chemical measures. This study aims at estimating the effects of cover crop (CC) mixtures, various stubble tillage methods, and glyphosate treatments on black-grass, volunteer wheat and total weed infestation. Two experimental trials were conducted in Southwestern Germany including seven weed management treatments: flat soil tillage, deep soil tillage, ploughing, single glyphosate application, dual glyphosate application, and a CC mixture sown in a mulch-till and no-till system. An untreated control treatment without any processing was also included. Weed species were identified and counted once per month from October until December. The CC mixtures achieved a black-grass control efficacy of up to 100%, whereas stubble tillage and the single glyphosate treatment did not reduce the black-grass population, on the contrary it induced an increase of black-grass plants. The dual glyphosate application showed, similar to the CC treatments, best results for total weed and volunteer wheat reduction. The results demonstrated, that well developed CCs have a great ability for weed control and highlight that soil conservation systems do not have to rely on chemical weed control practices.

Bio-efficacy of post emergence herbicides in boro rice nursery as well as main field and their residual effects on non-target microorganisms

2020 ◽  
Vol 57 (3) ◽  
pp. 199-210
Author(s):  
Rajib Kundu ◽  
Mousumi Mondal ◽  
Sourav Garai ◽  
Ramyajit Mondal ◽  
Ratneswar Poddar
Keyword(s):  
Weed Control ◽  
Weed Management ◽  
Field Experiments ◽  
Block Design ◽  
Resistance Index ◽  
Residual Effects ◽  
Cost Ratio ◽  
Main Field ◽  
Weed Species ◽  
Similar Treatment

Field experiments were conducted at research farm of Bidhan Chandra Krishi Viswavidyalaya, Kalyani, West Bengal, India (22°97' N latitude and 88°44' E longitude, 9.75 m above mean sea level) under natural weed infestations in boro season rice (nursery bed as well as main field) during 2017-18 and 2018-19 to evaluate the herbicidal effects on weed floras, yield, non-target soil organisms to optimize the herbicide use for sustainable rice-production. Seven weed control treatments including three doses of bispyribac-sodium 10% SC (150,200, and 250 ml ha-1), two doses of fenoxaprop-p-ethyl 9.3% EC (500 and 625 ml ha-1), one weed free and weedy check were laid out in a randomized complete block design, replicated thrice. Among the tested herbicides, bispyribac-sodium with its highest dose (250 ml ha-1) resulted in maximum weed control efficiency, treatment efficiency index and crop resistance index irrespective of weed species and dates of observation in both nursery as well as main field. Similar treatment also revealed maximum grain yield (5.20 t ha-1), which was 38.38% higher than control, closely followed by Fenoxaprop-p-ethyl (625 ml ha-1) had high efficacy against grasses, sedge and broadleaf weed flora. Maximum net return (Rs. 48765 ha-1) and benefit cost ratio (1.72) were obtained from the treatment which received bispyribac-sodium @ 250 ml ha-1. Based on overall performance, the bispyribac-sodium (250 ml ha-1) may be considered as the best herbicide treatment for weed management in transplanted rice as well as nursery bed.

Impact of cultivars and herbicides on weed management in alfalfa

2006 ◽  
Vol 86 (3) ◽  
pp. 875-885 ◽  
Author(s):  
J. R. Moyer ◽  
S. N. Acharya
Keyword(s):  
British Columbia ◽  
Weed Control ◽  
Weed Management ◽  
Forage Quality ◽  
Western Canada ◽  
Downy Brome ◽  
Weed Species ◽  
Standard Type ◽  
Southern Alberta ◽  
Medicago Sativa L

Weeds, especially dandelion (Taraxacum officinale Weber in F.H. Wigg.), tend to infest a forage alfalfa (Medicago sativa L.) stand 2 to 4 yr after establishment. To develop better weed management systems, experiments were conducted at Lethbridge, Alberta, from 1995 to 2002 and Creston, British Columbia, from 1998 to 2001, which included the alfalfa cultivars Beaver (standard type) and AC Blue J (Flemish type) and annual applications of metribuzin and hexazinone. These herbicides are registered for weed control in irrigated alfalfa in Alberta and alfalfa grown for seed. In addition, two sulfonylurea herbicides, metsulfuron and sulfosulfuron, and glyphosate were included. All of the herbicides except glyphosate controlled or suppressed dandelion and mustard family weeds. Metsulfuron at 5 g a.i. ha-1 almost completely controlled dandelion at both locations. However, after metsulfuron application at Lethbridge, dandelion was replaced with an infestation of downy brome, which is unpalatable for cattle. None of the herbicides increased total forage (alfalfa + weed) yield, and in some instances herbicides reduced forage quality by causing a shift from a palatable to an unpalatable weed species. However, it was observed that AC Blue J consistently yielded more than Beaver, and weed biomass was consistently less in the higher-yielding cultivar. AC Blue J was developed primarily for the irrigated area in southern Alberta and for southern British Columbia. Therefore, additional experiments should be conducted to determine which alfalfa cultivars have the greatest ability to compete with weeds in other regions of western Canada. Key words: Alfalfa yield, dandelion, forage quality, weed control

Weed Management with Glyphosate- and Glufosinate-Based Systems in PHY 485 WRF Cotton

2011 ◽  
Vol 25 (2) ◽  
pp. 183-191 ◽  
Author(s):  
Jared R. Whitaker ◽  
Alan C. York ◽  
David L. Jordan ◽  
A. Stanley Culpepper
Keyword(s):  
Weed Control ◽  
Weed Management ◽  
Fiber Quality ◽  
Palmer Amaranth ◽  
Weed Species ◽  
Crop Tolerance ◽  
The North ◽  
Annual Grasses ◽  
Resistance Trait ◽  
Cotton Belt

Glyphosate-resistant (GR) Palmer amaranth has become a serious pest in parts of the Cotton Belt. Some GR cotton cultivars also contain the WideStrike™ insect resistance trait, which confers tolerance to glufosinate. Use of glufosinate-based management systems in such cultivars could be an option for managing GR Palmer amaranth. The objective of this study was to evaluate crop tolerance and weed control with glyphosate-based and glufosinate-based systems in PHY 485 WRF cotton. The North Carolina field experiment compared glyphosate and glufosinate alone and in mixtures applied twice before four- to six-leaf cotton. Additional treatments included glyphosate and glufosinate mixed withS-metolachlor or pyrithiobac applied to one- to two-leaf cotton followed by glyphosate or glufosinate alone on four- to six-leaf cotton. All treatments received a residual lay-by application. Excellent weed control was observed from all treatments on most weed species. Glyphosate was more effective than glufosinate on glyphosate-susceptible (GS) Palmer amaranth and annual grasses, while glufosinate was more effective on GR Palmer amaranth. Annual grass and GS Palmer amaranth control by glyphosate plus glufosinate was often less than control by glyphosate alone but similar to or greater than control by glufosinate alone, while mixtures were more effective than either herbicide alone on GR Palmer amaranth. Glufosinate caused minor and transient injury to the crop, but no differences in cotton yield or fiber quality were noted. This research demonstrates glufosinate can be applied early in the season to PHY 485 WRF cotton without concern for significant adverse effects on the crop. Although glufosinate is often less effective than glyphosate on GS Palmer amaranth, GR Palmer amaranth can be controlled with well-timed applications of glufosinate. Use of glufosinate in cultivars with the WideStrike trait could fill a significant void in current weed management programs for GR Palmer amaranth in cotton.

Alternatives to Atrazine for Weed Management in Processing Sweet Corn

Weed Science ◽  
2016 ◽  
Vol 64 (3) ◽  
pp. 531-539 ◽  
Author(s):  
Zubeyde Filiz Arslan ◽  
Martin M. Williams ◽  
Roger Becker ◽  
Vincent A. Fritz ◽  
R. Ed Peachey ◽  
...  
Keyword(s):  
Weed Control ◽  
Weed Management ◽  
Sweet Corn ◽  
Crop Yields ◽  
Production Systems ◽  
Field Trials ◽  
Management Systems ◽  
Weed Species ◽  
Application Timing ◽  
Production Areas

Atrazine has been the most widely used herbicide in North American processing sweet corn for decades; however, increased restrictions in recent years have reduced or eliminated atrazine use in certain production areas. The objective of this study was to identify the best stakeholder-derived weed management alternatives to atrazine in processing sweet corn. In field trials throughout the major production areas of processing sweet corn, including three states over 4 yr, 12 atrazine-free weed management treatments were compared to three standard atrazine-containing treatments and a weed-free check. Treatments varied with respect to herbicide mode of action, herbicide application timing, and interrow cultivation. All treatments included a PRE application of dimethenamid. No single weed species occurred across all sites; however, weeds observed in two or more sites included common lambsquarters, giant ragweed, morningglory species, velvetleaf, and wild-proso millet. Standard treatments containing both atrazine and mesotrione POST provided the most efficacious weed control among treatments and resulted in crop yields comparable to the weed-free check, thus demonstrating the value of atrazine in sweet corn production systems. Timely interrow cultivation in atrazine-free treatments did not consistently improve weed control. Only two atrazine-free treatments consistently resulted in weed control and crop yield comparable to standard treatments with atrazine POST: treatments with tembotrione POST either with or without interrow cultivation. Additional atrazine-free treatments with topramezone applied POST worked well in Oregon where small-seeded weed species were prevalent. This work demonstrates that certain atrazine-free weed management systems, based on input from the sweet corn growers and processors who would adopt this technology, are comparable in performance to standard atrazine-containing weed management systems.

Allelopathic potential of Artemisia herba-alba and Anthemis arvensis to control Weeds in Wheat (Triticum aestivum) and Barley (Hordeum vulgare)

2016 ◽  
Vol 6 (3) ◽  
pp. 95-100
Author(s):  
Nadi Awwad Al Harbi
Keyword(s):  
Triticum Aestivum ◽  
Hordeum Vulgare ◽  
Aqueous Extract ◽  
Weed Management ◽  
Allelopathic Effect ◽  
Weed Species ◽  
Crop Species ◽  
Allelopathic Potential ◽  
Anthemis Arvensis ◽  
Germination And Growth

The aim of the present study was to investigate the potentials for utilization of Artemisia herba-alba and Anthemis arvensis shoot aqueous extract at different concentrations (1%, 3%, and 5%) to suppress the germination and growth of Panicum turgidum and Portulaca oleracea (weeds of crop fields) in Petri dish experiment. Results indicated that the degree of inhibition on seed germination and growth of the recipient species was largely dependent on the concentration of A. herba-alba and A.arvensis shoot aqueous extract. The aqueous extract of A.herba-alba showed the highest allelopathic effect on the germination of the seeds of P. turgidum, (10%,10% and 0%) while the effect of A. arvensis shoot aqueous extract was greater on the germination of the seeds P. oleracea (40%,0% and 0%). Percentage germination of the two selected crop species Triticum aestivum and Hordeum vulgare also de-creased as the A.herba-alba and A.arvensis shoot aqueous extract concentra-tion increased from 1% to 5% (90%,80% and 70%),(40%,40% and 20%). But the inhibition percentage was largely less than that of weed species. The results also showed that H.vulgare was more sensitive than T. aestivum and responds more strongly to the increase of concentration of A. herba-alba shoot aqueous extract . Results also showed that the radicle length of almost all tested species was more sensitive to allelochemicals from A.herba-alba and A.arvensis shoot aqueous extract than plumule length. Therefore, A. herba-alba and A. arvensis shoot aqueous extract may offer promises for their usefulness as a tool for weed management.

scholarly journals Weeds and Their Effect on the Performance of Maize and Finger Millet in Mid-Hills of Nepal

2014 ◽  
Vol 2 (3) ◽  
pp. 275-278 ◽  
Author(s):  
Tika Bahadur Karki ◽  
Shrawan K. Sah ◽  
Resam B. Thapa ◽  
Andrew J. McDonald ◽  
Adam S. Davis ◽  
...  
Keyword(s):  
Weed Management ◽  
Crop Production ◽  
Finger Millet ◽  
Crop Yields ◽  
Management Strategies ◽  
Cropping System ◽  
Weed Species ◽  
Ageratum Conyzoides ◽  
Alternative Crop ◽  
Weed Infestation

Relay cropping of maize with fingermillet (maize/fingermillet) is the predominant cropping system for sustaining food security situation in the hilly regions of Nepal. In this region weed pressure severely reduces crop yields. Basic information on weed species composition, biomass production and their effect on crop yields and economics are lacking for this region. This information will be necessary to develop effective weed management strategies for the future. In light of this an empirical study was carried out in two representatives mid hill districts of Parbat and Baglung during summer season of 2010/2011 in Nepal. A total of 10 major weed species with densities of 172 in Parbat and 311 per 0.25m2 area in Baglung were observed. The highest percentage of both relative and absolute densities were recorded for Ageratum conyzoides in Parbat and Polygonum chinensis in Baglung. Weed infestation under farmers practice of crop management reduced the grain yield of maize by 1.985 Mt ha-1 (117%) in Baglung and 1.760 Mt ha-1 (108%) in Parbat. Similarly, in finger millet it was 0.489 Mt ha-1 (63%) in Baglung and 0.403 Mt ha-1 in Parbat. Similarly, the combined yield of both the crops was also significantly reduced by 79.3% and 61.7% in Baglung and Parbat respectively. Hence, weeds are directly affecting the crop performance in the region. Therefore, there is an urgent need to develop an alternative crop production system in the hills. DOI: http://dx.doi.org/10.3126/ijasbt.v2i3.10790Int J Appl Sci Biotechnol, Vol. 2(3): 275-278  

Influence of AC 263,222 Rate and Application Method on Weed Management in Peanut (Arachis hypogaea)

1997 ◽  
Vol 11 (3) ◽  
pp. 520-526 ◽  
Author(s):  
Theodore M. Webster ◽  
John W. Wilcut ◽  
Harold D. Coble
Keyword(s):  
Weed Control ◽  
Weed Management ◽  
Application Rate ◽  
Purple Nutsedge ◽  
Yellow Nutsedge ◽  
Control Effectiveness ◽  
Application Method ◽  
Rate Controlled ◽  
Ac 263,222 ◽  
Prickly Sida

Experiments were conducted in 1991 and 1992 to evaluate the weed control effectiveness from several rates of AC 263,222 applied PPI and PRE (36 and 72 g ai/ha), early POST (EPOST) (18, 36, 54, or 72 g/ha), POST (18, 36, 54, or 72 g/ha), and EPOST followed by (fb) POST (27 fb 27 g/ha or 36 fb 36 g/ha). These treatments were compared to the commercial standard of bentazon at 0.28 kg ai/ha plus paraquat at 0.14 kg ai/ha EPOST fb bentazon at 0.56 kg/ha plus paraquat at 0.14 kg/ha plus 2,4-DB at 0.28 kg ae/ha. Application method had little effect on weed control with AC 263,222. In contrast, application rate affected control. Purple nutsedge, yellow nutsedge, prickly sida, smallflower morningglory, bristly starbur, common cocklebur, and coffee senna were controlled at least 82% with AC 263,222 at 36 g/ha (one-half the maximum registered use rate) regardless of application method. AC 263,222 at 72 g/ha (registered use rate) controlled sicklepod 84 to 93%, Florida beggarweed 65 to 100%, andIpomoeamorningglory species 89 to 99%. A single application of AC 263,222 at 36 g/ha or more controlled all weeds (with the exception of Florida beggarweed) as well or greater than sequential applications of bentazon plus paraquat fb bentazon, paraquat, and 2,4-DB. All rates of AC 263,222 applied POST and all application methods of AC 263,222 at 72 g/ha had better yields than the pendimethalin control.

Decision Rules for Postemergence Control of Pigweed (Amaranthusspp.) in Soybean (Glycine max)

Weed Science ◽  
1996 ◽  
Vol 44 (1) ◽  
pp. 126-132 ◽  
Author(s):  
Anita Dieleman ◽  
Allan S. Hamill ◽  
Glenn C. Fox ◽  
Clarence J. Swanton
Keyword(s):  
Weed Control ◽  
Weed Management ◽  
Economic Model ◽  
Yield Loss ◽  
Control Function ◽  
Decision Rules ◽  
Optimal Dose ◽  
Weed Species ◽  
Weed Density ◽  
Control Decision

Weed control decision rules were derived for the application of postemergence herbicides to control pigweed species in soybean. Field experiments were conducted at two locations in 1992 and 1993 to evaluate soybean-pigweed interference. A damage function was determined that related yield loss to time of pigweed emergence, density, and soybean weed-free yield. A control function described pigweed species response to variable doses of imazethapyr and thifensulfuron. The integration of these two functions formed the basis of an economic model used to derive two weed control decision rules, the biologist's “threshold weed density” and the economist's “optimal dose.” Time of weed emergence had a more significant role than weed density in the economic model. Later-emerging pigweed caused less yield loss and therefore, decision rules lead to overuse of herbicides if emergence time is not considered. The selected herbicide dose influenced the outcome of the control function. Depending on the desired level of weed control, a herbicide could be chosen to either eradicate the escaped weed species (label or biologically-effective doses) or reduce the growth of the weed species and thereby offset interference (optimal dose). The development of a biologically-effective dose by weed species matrix was recommended. Decision rules should not be utilized as an exclusive weed management strategy but rather as a component of an integrated weed management program.

Weed Control Efficacy and Pinto Bean (Phaseolus vulgaris) Tolerance to Early Season Mechanical Weeding

1995 ◽  
Vol 9 (3) ◽  
pp. 531-534 ◽  
Author(s):  
Mark J. Vangessel ◽  
Lori J. Wiles ◽  
Edward E. Schweizer ◽  
Phil Westra
Keyword(s):  
Phaseolus Vulgaris ◽  
Weed Control ◽  
Weed Management ◽  
Seed Weight ◽  
Growth Stage ◽  
Integrated Approach ◽  
Growth Stages ◽  
Weed Species ◽  
Control Efficacy ◽  
Pinto Bean

An integrated approach to weed management in pinto bean is needed since available herbicides seldom adequately control all weed species present in a field. A two-year study was conducted to assess weed control efficacy and pinto bean tolerance to mechanical weeding from a rotary hoe or flex-tine harrow at crook, unifoliolate, and trifoliolate stages of bean development. Weed control was similar for both implements and all timings in 1993. In 1994, mechanical weeding at trifoliolate and both crook and trifoliolate stages controlled more weeds than at other growth stages, regardless of type of implement. Using the flex-tine harrow reduced pinto bean stand, but results based on growth stage were not consistent each year. Damage to pinto bean hypocotyls and stems was observed with the flex-tine harrow used at both crook and trifoliolate stages in 1994. Rotary hoeing did not reduce pinto bean stand or cause injury. Yield and seed weight did not differ among treatments in either year.

Sign in / Sign up

Export Citation Format

Share Document