scholarly journals Design of Lighting Control with RTC Timer and SMS Using Microcontroller

2017 ◽  
Vol 1 (1) ◽  
pp. 24
Author(s):  
IGAP Raka Agung ◽  
IGAK Diafari Djuni H
Keyword(s):  
Flash Memory ◽  
Light Illumination ◽  
Memory Research ◽  
Lighting Control ◽  
Turn On ◽  
Lighting Conditions ◽  
Lcd Display ◽  
Input Time ◽  
Arduino Uno ◽  
Switch Circuit

The purpose of this research is to make the switch to turn on and off lighting with time can be set based on certain conditions. Controller utilizes Arduino UNO microcontroller with input from DS1307 RTC IC, photodiode, IComSat V1.1 with the output of LCD display and lighting switch. In this study realized photodiode sensor to detect dark and light illumination, DS1307 RTC IC as a source of real-time equal to the time actually, IComSat v1.1 SIM900 GSM/GPRS Shield for Arduino to communicate with HP via SMS, switch circuit and drivers for turn on and off the load of lighting and Arduino UNO with programs that has been put into flash memory. Research results obtained are supporting components of the equipment control to turn on and off of lighting utilizing microcontroller can be realized and are functioning in accordance with the plan. Two lightings can already turn on and off based on the input time of the RTC (the default) and on off status can be checked by SMS. Both lightings can already be turn on and off by SMS messages sent from mobile HP and received by microconroller (IComSat) and feedback lighting conditions is already accepted by mobile HP corresponds to on and off lights condition.

Reosquido Desalinasi Metode Evaporasi dengan Ultraviolet Berbasis Mikrokontroller

2018 ◽  
Vol 3 (2) ◽  
pp. 38-47
Author(s):  
Muhammad Abdul Azis ◽  
Nuryake Fajaryati
Keyword(s):  
Temperature Measurement ◽  
Fresh Water ◽  
Sea Water ◽  
Evaporation Process ◽  
Heater Element ◽  
The Third ◽  
Turn On ◽  
Speed Up ◽  
Arduino Uno

This research aims to create a Reosquido desalination tool for evaporation methods using a microcontroller. This tool can control the temperature to speed up the evaporation process in producing fresh water. The method applied to Reosquido desalination uses Evaporation. The first process before evaporation is the detection of temperature in sea water that will be heated using an element heater. The second process of temperature measurement is to turn off and turn on the Arduino Uno controlled heater, when the temperature is less than 80 ° then the heater is on. The third process is evaporation during temperatures between 80 ° to 100 °, evaporation water sticks to the glass roof which is designed by pyramid. Evaporated water that flows into the reservoir is detected by its solubility TDS value. The fourth process is heater off when the temperature is more than 100 °. Based on the results of the testing, the desalination process using a microcontroller controlled heater can speed up the time up to 55% of the previous desalination process tool, namely manual desalination prsoes without using the heater element controlled by the temperature and controlled by a microcontroller which takes 9 hours. Produces fresh water as much as 30ml from 3000ml of sea water, so that it can be compared to 1: 100.

scholarly journals Multifunctional molybdenum disulfide flash memory using a PEDOT:PSS floating gate

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Seongin Hong ◽  
Junwoo Park ◽  
Jung Joon Lee ◽  
Sunjong Lee ◽  
Kyungho Yun ◽  
...  
Keyword(s):  
Molybdenum Disulfide ◽  
Flash Memory ◽  
Floating Gate ◽  
Bending Test ◽  
Light Illumination ◽  
Transition Metal Dichalcogenide ◽  
Large Memory ◽  
Temperature Solution ◽  
Multilevel Memory ◽  
Floating Layer

AbstractTwo-dimensional transition metal dichalcogenide materials (TMDs), such as molybdenum disulfide (MoS2), have been considered promising candidates for future electronic applications owing to their electrical, mechanical, and optical properties. Here, we present a new concept for multifunctional MoS2 flash memory by combining a MoS2 channel with a PEDOT:PSS floating layer. The proposed MoS2 memory devices exhibit a switching ratio as high as 2.3 × 107, a large memory window (54.6 ± 7.80 V), and high endurance (>1,000 cycles). As the PEDOT:PSS film enables a low-temperature solution-coating process and mechanical flexibility, the proposed P-memory can be embedded on a polyimide substrate over a rigid silicon substrate, offering high mechanical endurance (over 1,000 cycle bending test). Furthermore, both MoS2 and PEDOT:PSS have a bandgap that is desirable in optoelectronic memory operation, where charge carriers are stored differently in the floating gate depending on light illumination. As a new application that combines photodiodes and memory functions, we demonstrate multilevel memory programming based on light intensity and color.

Research and Design of Intelligent Lighting Control System Based on Industrial Wireless Technology

2011 ◽  
Vol 467-469 ◽  
pp. 620-624 ◽  
Author(s):  
Jun Wang ◽  
Wei Ru Chen
Keyword(s):  
Control System ◽  
The Internet ◽  
Control Technology ◽  
Wireless Technology ◽  
Lighting Control ◽  
Turn On ◽  
Point Control ◽  
The Cost ◽  
Research And Design ◽  
The Internet Of Things

The intelligent lighting control system is one of typical applications of the Internet of things. The method of intelligent lighting control system based on industrial wireless technology is proposed in the paper. It used proposed three-point-control technology, and adjusting the brightness of lamps, turn on/off the lamps and a part of fault detection can be realized. At the same time, it can greatly reduce the cost of system. It will be useful to engineer and researchers.

scholarly journals RANCANG BANGUN SISTEM PENYIRAMAN TANAMAN SAYUR BERBASIS ARDUINO DENGAN SENSOR KELEMBABAN TANAH

2020 ◽  
Vol 1 (1) ◽  
pp. 23-32
Author(s):  
Sampurna Dadi Riskiono ◽  
Roy Harry Syidiq Pamungkas ◽  
Yudha Arya
Keyword(s):  
Soil Moisture ◽  
Water Content ◽  
Manual Work ◽  
Tomato Plants ◽  
Moisture Sensor ◽  
Final Project ◽  
Soil Moisture Sensor ◽  
Turn On ◽  
System Components ◽  
Arduino Uno

Development at this time is increasing, people expect a tool or technology that can help human work, so technology becomes a necessity for humans. This final task is made a device that can do the job of watering tomato plants automatically. This tool aims to replace the manual work becomes automatic. The benefit of this tool is that it can facilitate the work of humans in watering chili plants. This tool uses a soil moisture sensor which acts as a soil moisture detector and sends an order to Arduino Uno to turn on the relay driver so that the wiper motor can splash water according to the needs of the soil automatically. The making of this final project is done by designing, making and implementing system components which include Arduino uno as a controller, driver relay to blow on and off the wiper motor, LCD (Linquit Cristal Display) to display the percentage value of water content

scholarly journals Sistem Pengontrolan Lampu Gedung STMIK AMIK Riau Berbasis IoT (Internet Of Things)

2018 ◽  
Vol 3 (2) ◽  
pp. 131
Author(s):  
Rometdo Muzawi ◽  
Wahyu Joni Kurniawan
Keyword(s):  
Internet Of Things ◽  
Current Trend ◽  
Control Process ◽  
Internet Technology ◽  
Raspberry Pi ◽  
The Internet ◽  
Lighting Control ◽  
Turn On ◽  
Security Officers ◽  
Internet Network

Internet of Things, also known as abbreviation IoT, is a hardware device (Raspberry Pi) that can connect to the internet with the aim of expanding the internet network connected to the hardware. The development of the Internet of things is a 4.0 technological revolution which is again the current trend. One of the uses of IoT technology is controlling room lights through an internet network that is controlled via a smartphone that can be operated remotely anywhere and anytime. But so far the control of the lights at STMIK Amik Riau is still done manually where security officers approach the swish button to turn on the lights. Therefore it is necessary to design a device that can control electronic equipment (lights) in real time. Where this study aims to build remote-controlled devices by utilizing internet technology to carry out an Internet of Things (IoT) based light control process. This research was conducted by building a prototype with python and mobile based programming applications. In this study there is a room lighting control feature with the first condition that one lamp is used to turn on a lamp and the second condition is used to turn on the lights simultaneously and coupled with camera modules to monitor the condition of the room

The Research of CAN Bus in the Car Intelligent Lighting Control System

2013 ◽  
Vol 765-767 ◽  
pp. 1908-1911
Author(s):  
Yi Wang ◽  
Li Ren He
Keyword(s):  
Control System ◽  
Can Bus ◽  
High Reliability ◽  
Automotive Control ◽  
Lighting Control ◽  
Intelligent Control System ◽  
Road Lighting ◽  
Lighting Conditions ◽  
Automotive Lighting ◽  
Photoelectric Sensor

As one of the most important subsystem of automotive control systems, the design of automotive lighting control system is essential. In this article, the automotive intelligent headlight control system based on CAN bus was introduced, and the system hardware structure and software design processes was given. Adopted MC9S08DZ60 microcontroller which integrated the CAN controller as the master chip. While taking advantage of the photoelectric sensor to analyze road lighting conditions, according to light changes in the external environment to achieve automatic dimmer. The circuit has characteristics of simple hardware design, high reliability and real-time. And provided a theoretical basis for the Hyundai Motor intelligent control system.

scholarly journals Development of Wireless Control System for Smart Street Lighting using ESP8266

2020 ◽  
Vol 14 (15) ◽  
pp. 68
Author(s):  
Syifaul Fuada ◽  
Trio Adiono ◽  
Lindawani Siregar
Keyword(s):  
Control System ◽  
Pulse Width Modulation ◽  
Low Cost ◽  
Environmental Condition ◽  
Lighting System ◽  
Street Lighting ◽  
Lighting Control ◽  
Turn On ◽  
Wireless Control ◽  
Temperature And Humidity

In this paper, we report a smart street lighting control system using the ESP8266 which is a low-cost Wi-Fi chip with full TCP/IP stack and microcontroller capability. Our system is equipped with a web server developed in HTML code. Hence, our smart street lighting system can be controlled wirelessly to turn ON or turn OFF, and it can be monitored its environmental condition (i.e., temperature and humidity around the system). All sensors used in this system are pure digitally-outputted sensor: DHT11 to monitor the ambient temperature and humidity and BH1750 to adjust the street light intensity automatically. The dimming technique was applied in the control system by using Pulse Width Modulation (PWM). The system was divided into two main parts: Gateway and Node in which these two parts employ the ESP8266. The Gateway as a coordinator will send a message to the node as an end device (in this work, the streetlight act as a Node). Later, the node will send the ACK to the Gateway. As results, each node can send a message to other nodes.

scholarly journals Solar Tracking System Untuk Lampu Taman STMIK AUB Surakarta Berbasis Arduino Uno

2018 ◽  
Vol 24 (2) ◽  
pp. 134
Author(s):  
Robby Rachmatullah ◽  
Dessyana Kardha ◽  
Dani Triwiyanto
Keyword(s):  
Solar Energy ◽  
Fossil Fuels ◽  
Tracking System ◽  
Electrical Energy ◽  
Energy Sources ◽  
Solar Panels ◽  
Turn On ◽  
Solar Tracking ◽  
Arduino Uno ◽  
To Receive

The transfer of electrical energy sources from non-renewable fossil fuels to alternative renewable fuels can be made by utilizing solar energy. The working system of arduino uno solar tracking system for STMIK AUB garden lights is by capturing solar energy through solar panels which are then stored inside the battery where the charging process is controlled by solar charge controller. LDR functions to receive and identify the radiated light quantities which are then forwarded into the arduino uno and processed to drive the DC motor that has become one with the solar panel. If the day begins to darken the LDR will inform the arduino uno and then it will be processed by arduino uno to turn on the DC light.

scholarly journals Rancang Bangun Pintu Air Otomatis Menggunakan Water Level Float Switch Berbasis Mikrokontroler

2015 ◽  
Vol 4 (1) ◽  
pp. 22
Author(s):  
Heki Apriyanto
Keyword(s):  
Water Level ◽  
Lcd Display ◽  
Arduino Uno

Penelitian ini bertujuan untuk membangun sistem pintu air otomatis membuka ataupun menutup pintu berdasarkan ketinggian air pada bendungan yang sebelumnya masih bersifat konvensional atau masih menggunakan tenaga manusia. Pintu air yang bersifat konvensional dinilai kurang efektif, mengingat curah hujan yang cukup tinggi disertai sulitnya memperkirakan ketinggian air yang selalu berubah-ubah, selain faktor tersebut ketinggian air pada suatu bendungan dipengaruhi juga oleh banjir kiriman didaerah lain. Metode penelitian yang digunakan dengan menggunakan pengumpulan data dan pengembangan perangkat yang terdiri dari perencanaan, analisis, perancangan dan implementasi, dimana dalam analisis menggunakan analisis SWOT untuk menilai layak atau tidaknya rancangan ini diterapkan. Hasil yang diharapkan adalah terwujudnya pintu air otomatis untuk meringankan manusia dalam menjalankan tugas serta membuat sistem yang berjalan dengan lebih efisien. Rancang bangun pintu air otomatis ini menggunakan mikrokontroler arduino uno dan nano sebagai alat pemroses, serta dilengkapi dengan sensor ultrasonik, water level float switch sensor, LCD display, motor servo. Water level float switch sensor yang berfungsi untuk memutar motor servo untuk mengangkat atau menurunkan pintu air sesuai batas ketinggian air. Hasil yang diharapkan adalah terciptanya sistem pintu air otomatis pada suatu bendungan dan dapat mengurangi kelalaian manusia dalam bertugas mengingat sulitnya memperkirakan ketinggian air yang selalu berubah-ubah dalam waktu tertentu.

scholarly journals Urinoir Analyzer Pintar Pendeteksi Kelainan Pada Fungsi Ginjal Dengan Analisis Kadar Ph Dan Warna Pada Urin

2020 ◽  
Vol 2 (1) ◽  
pp. 32-40
Author(s):  
M. Iqbal Febryansah ◽  
Anton Yudhana ◽  
Alfian Ma'arif
Keyword(s):  
Urine Sample ◽  
Urine Analysis ◽  
Ph Value ◽  
Color Sensor ◽  
Lcd Display ◽  
Accuracy Level ◽  
Arduino Uno ◽  
Input Variables

Perkembangan pemeriksaan penyakit kelainan ginjal melalui analisa urin saat ini dilakukan dalam dua proses pemeriksaan secara makroskopis dan mikroskopis. Pada dasarnya dibutuhkan sebuah alat yang mampu memproses dan menganalisis sebuah sampel urin secara otomatis agar tidak terjadinya kesalahan dalam melakukan pemeriksaan penyakit melalui sampel urin. Awalan perkembangan ini menggunakan sebuah Kontroler Arduino UNO dan dua buah variabel masukan yaitu sensor warna TCS3200 dan sensor PH meter SKU SEN0161. Dua buah variabel masukan sensor bekerja secara berdampingan dengan sensor TCS3200 memiliki hasil keluaran berupa nilai frekuensi RGB dan diproses kembali menjadi frekuensi keabuan. Lalu, sensor PH meter SKU SEN0161 menghasilkan sebuah nilai PH pada sampel urin. Hasil dari pemeriksaan tersebut ditampilkan pada sebuah penampil berupa LCD berukuran 16x2. Hasil pemeriksaan dari alat ini dibandingkan dengan hasil analisa pakar dari Balai Laboratorium Kesehatan Yogyakarta bagian Urology. dan mendapatkan tingkatan nilai akurasi 93% dengan keberhasilan data sebanyak 28 dari 30 data yang diambil. The development of examining kidney disorders through urine analysis is currently carried out in two processes of examination, macroscopic and microscopic. Basically, we need a tool that is able to process and analyze a urine sample automatically so that there are no errors in carrying out disease checks through the urine sample. The beginning of this development used an Arduino UNO controller and two input variables, namely the TCS3200 color sensor and the SKU SEN0161 PH meter sensor. Two sensor input variables working side by side with the TCS3200 sensor have an output in the form of RGB frequency values and are processed back into gray frequencies. Then, the PH meter SKU SEN0161 sensor generates a PH value in the urine sample. The results of these checks are displayed on a 16x2 LCD display. The examination results of this tool are compared with the results of the analysis of experts from the Yogyakarta Health Laboratory Center, Urology section. and get an accuracy level of 93% with the success of the data as much as 28 of the 30 data taken.

Sign in / Sign up

Export Citation Format

Share Document