scholarly journals Optimasi Kadar Ultimate dan Tingkat Kebasaan Bio-arang Limbah Kayu Durian sebagai Pembenah Tanah

2021 ◽  
Vol 11 (02) ◽  
pp. 59
Author(s):  
Heri Soedarmanto ◽  
Evy Setiawaty ◽  
Taufik Iskandar
Keyword(s):  
Particle Size ◽  
Response Surface Methodology ◽  
Response Surface ◽  
Oil And Gas ◽  
Pyrolysis Temperature ◽  
Raw Materials ◽  
Wood Waste ◽  
Quadratic Model ◽  
Ph Optimum ◽  
Pyrolysis Of Biomass

Konversi biomassa melalui pirolisis menghasilkan bio-arang, bio-minyak dan gas. Pirolisis biomassa dipengaruhi oleh kondisi pirolisis seperti bahan baku dan suhu pirolisis. Tujuan dari penelitian ini adalah menganalisis kondisi optimum kadar ultimate (CHO) dan pH bio-arang berdasarkan ukuran partikel bahan baku limbah kayu durian dan suhu pirolisis sebagai pembenah tanah. Limbah kayu durian yang digunakan dalam penelitian ini berukuran diameter 0,17–0,42 mm; 0,42–1,00 mm; dan 1,00–2,83 mm, dengan variasi suhu pirolisis 350°C, 450°C, dan 550°C sebanyak tiga kali ulangan. Optimasi menggunakan metode Response Surface Methodology. Berdasarkan model kuadratik, didapatkan kadar karbon optimum bio-arang sebesar 81,78% dengan ukuran partikel bahan baku pada 2,09 mm dan suhu pirolisis 530,5oC. Kadar hidrogen optimum bio-arang sebesar 3,35% dengan ukuran partikel bahan baku 2,89 mm dan suhu pirolisis 547,4oC. Kadar oksigen optimum bio-arang sebesar 12,22% dengan ukuran partikel bahan baku 1,89 mm dan suhu pirolisis 529,5oC. pH optimum bio-arang sebesar 8,35 dengan ukuran partikel bahan baku 0,6 mm dan suhu pirolisis 521,8oC. Kondisi proses terbaik untuk menghasilkan kadar ultimate dan pH yang paling optimal berada pada range ukuran diameter bahan baku 0,6 mm–2,89 mm dan suhu pirolisis sebesar 521,8oC–547,4oC.  The Optimization of Ultimate Levels and Basicity of Durian Wood Waste Biochar as Soil AmendmentAbstractBiomass conversion through pyrolysis produces biochar, bio-oil and gas. Pyrolysis of biomass is influenced by pyrolysis conditions such as raw materials and pyrolysis temperature. The purpose of this study was to analyze the optimum conditions for ultimate levels (CHO) and pH of biochar based on the particle size of the durian wood waste and the pyrolysis temperature as soil amendment. Particle sizes of durian waste were 0.17–0.42 mm; 0.42–1.00 mm; and 1.00–2.83 mm in diameter where pyrolysis temperatures were 350°C; 450°C; and 550°C. Optimization was used by the Response Surface Methodology method. Based on the quadratic model, the optimum carbon content of biochar was 81.78% with the particle size at 2.09 mm and the pyrolysis temperature of 530.5oC. The optimum hydrogen content of biochar was 3.35% with a particle size of 2.89 mm and a pyrolysis temperature of 547.4oC. The optimum oxygen content of biochar was 12.22% with a particle size of 1.89 mm and a pyrolysis temperature of 529.5oC. The optimum pH of biochar was 8.35 with a particle size of 0.6 mm and a pyrolysis temperature of 521.8oC. The most optimal ultimate levels and pH were in the diameter size range of 0.6 mm-2.89 mm and pyrolysis temperature of 521.8oC-547.4oC.

scholarly journals MODELLING AND OPTIMIZING THE APPLICATION OF WASTE TYRE POWDER (WTP) AS OIL SORBENT, USING RESPONSE SURFACE METHODOLOGY (RSM)

2020 ◽  
Vol 1 (2) ◽  
pp. 1-12
Author(s):  
A. O. Odeh ◽  
L. A. Okpaire
Keyword(s):  
Particle Size ◽  
Response Surface Methodology ◽  
Response Surface ◽  
Sorption Capacity ◽  
Automobile Industry ◽  
Contact Time ◽  
Quadratic Model ◽  
Oil Sorption ◽  
Oil Sorbent ◽  
Waste Tyre

The rapid growth of the automobile industry has led to the abundance and indiscriminate disposal of waste tyres which causes environmental pollution and also lead to serious health problems. The absorption of crude oil using waste tyre powder (WTP) was investigated. A three variable Box-Behnken design was used to study the effect of particle size, contact time and temperature on the oil sorption capacity of WTP. Optimization was carried out using Response Surface Methodology (RSM). A quadratic model was obtained to predict the oil sorption capacity of WTP as a function of particle size, contact time and temperature. The optimum conditions of the sorption process obtained from RSM gave a temperature of 30.19oC, contact time 59.04 mins and particle size 0.15mm. A maximum oil sorption capacity of 4.71 g/g was obtained at these optimized conditions. Also, a comparison between the oil sorption efficiency of fresh tyre powder and regenerated tyre powder subjected to the same conditions of particle size, contact time and temperature were carried out. It was shown that the oil sorption capacity of the fresh tyre powder was higher than that of regenerated tyre powder.

EXTRACTION OPTIMIZATION AND ANTIOXIDANT ACTIVITY OF PHENOLIC COMPOUNDS FROM AVOCADO PEEL

2019 ◽  
pp. 49-59
Author(s):  
Nu Linh Giang Ton ◽  
Thi Hoai Nguyen ◽  
Quoc Hung Vo
Keyword(s):  
Antioxidant Activity ◽  
Response Surface Methodology ◽  
Antioxidant Capacity ◽  
Response Surface ◽  
Total Antioxidant Capacity ◽  
Total Phenolic Content ◽  
Phenolic Content ◽  
Quadratic Model ◽  
Total Phenolic ◽  
Total Antioxidant

Avocado peel has been considered as a potential source of natural antioxidants in which phenolics are among the most important compounds. Therefore, this study aims to optimize the extraction process of phenolics using response surface methodology and evaluate the corresponding antioxidant activity. From the quadratic model, the optimal condition was determined including the ethanol concentration 54.55% (v/v), the solvent/solute ratio 71.82/1 (mL/g), temperature 53.03 oC and extraction time 99.09 min. The total phenolic content and the total antioxidant capacity at this condition with minor modifications were 26,74 ± 0,04 (mg GAE/g DW) and 188.06 ± 1.41 (mg AAE/g DW), respectively. The significant correlation between total phenolic content and total antioxidant capacity was also confirmed. Key words: response surface methodology, central composite rotatable design, total phenolic content, total antioxidant capacity, avocado peel

scholarly journals Optimization of Lignin Extraction Variables by Response Surface Methodology from Pine Saw Dust, and Quantification of Major Structural Units in Isolated Lignin Fraction

2021 ◽  
Vol 11 (4) ◽  
pp. 1739
Author(s):  
Muhammad Ajaz Ahmed ◽  
Jae Hoon Lee ◽  
Joon Weon Choi
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Quantum Coherence ◽  
Resonance Spectrum ◽  
Quadratic Model ◽  
Molecular Weights ◽  
Solids Loading ◽  
A Value ◽  
Lignin Extraction ◽  
Lignin Fraction

A synergistic combination of dioxane, acetic acid, and HCl was investigated for lignin extraction from pine wood biomass. After initial screening of reagent combination, response surface methodology (RSM) was used to optimize the lignin yield with respect to the variables of time 24–72 h, solids loading 5–15%, and catalyst dose 5–15 mL. A quadratic model predicted 8.33% of the lignin yield, and it was further confirmed experimentally and through the analysis of variance (ANOVA). Lignin at optimum combination exhibited features in terms of derivatization followed by reductive cleavage (DFRC) with a value of (305 µmol/gm), average molecular weights of 4358 and polydispersity of 1.65, and 2D heteronuclear single quantum coherence nuclear magnetic resonance spectrum (2D-HSQC NMR) analysis showing relative β-O-4 linkages (37.80%). From here it can be suggested that this fractionation can be one option for high quality lignin extraction from lignocellulosic biomass.

scholarly journals Optimizing Adsorption of 17α-Ethinylestradiol from Water by Magnetic MXene Using Response Surface Methodology and Adsorption Kinetics, Isotherm, and Thermodynamics Studies

Molecules ◽  
2021 ◽  
Vol 26 (11) ◽  
pp. 3150
Author(s):  
Mengwei Xu ◽  
Chao Huang ◽  
Jing Lu ◽  
Zihan Wu ◽  
Xianxin Zhu ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Quadratic Model ◽  
Adsorption Efficiency ◽  
Process Variables ◽  
Adsorption Time ◽  
Initial Concentration ◽  
Independent Variables ◽  
The Impact ◽  
Adsorbent Dose

Magnetic MXene composite Fe3O4@Ti3C2 was successfully prepared and employed as 17α-ethinylestradiol (EE2) adsorbent from water solution. The response surface methodology was employed to investigate the interactive effects of adsorption parameters (adsorption time, pH of the solution, initial concentration, and the adsorbent dose) and optimize these parameters for obtaining maximum adsorption efficiency of EE2. The significance of independent variables and their interactions were tested by the analysis of variance (ANOVA) and t-test statistics. Optimization of the process variables for maximum adsorption of EE2 by Fe3O4@Ti3C2 was performed using the quadratic model. The model predicted maximum adsorption of 97.08% under the optimum conditions of the independent variables (adsorption time 6.7 h, pH of the solution 6.4, initial EE2 concentration 0.98 mg L−1, and the adsorbent dose 88.9 mg L−1) was very close to the experimental value (95.34%). pH showed the highest level of significance with the percent contribution (63.86%) as compared to other factors. The interactive influences of pH and initial concentration on EE2 adsorption efficiency were significant (p < 0.05). The goodness of fit of the model was checked by the coefficient of determination (R2) between the experimental and predicted values of the response variable. The response surface methodology successfully reflects the impact of various factors and optimized the process variables for EE2 adsorption. The kinetic adsorption data for EE2 fitted well with a pseudo-second-order model, while the equilibrium data followed Langmuir isotherms. Thermodynamic analysis indicated that the adsorption was a spontaneous and endothermic process. Therefore, Fe3O4@Ti3C2 composite present the outstanding capacity to be employed in the remediation of EE2 contaminated wastewaters.

scholarly journals Rheological properties of emulsions stabilized by green banana (Musa cavendishii) pulp fitted by power law model

2009 ◽  
Vol 52 (6) ◽  
pp. 1541-1553 ◽  
Author(s):  
Dayane Rosalyn Izidoro ◽  
Agnes de Paula Scheer ◽  
Maria-Rita Sierakowsk
Keyword(s):  
Response Surface Methodology ◽  
Rheological Properties ◽  
Response Surface ◽  
Power Law ◽  
Cone Angle ◽  
Rheological Behaviour ◽  
Quadratic Model ◽  
Soy Oil ◽  
Power Law Model ◽  
Green Banana

In this work, the rheological behaviour of emulsions (mayonnaises) stabilized by green banana pulp using the response surface methodology was studied. In addition, the emulsions stability was investigated. Five formulations were developed, according to design for constrained surfaces and mixtures, with the proportion, respectively: water/soy oil/green banana pulp: F1 (0.10/0.20/0.70), F2 (0.20/0.20/0.60), F3 (0.10/0.25/0.65), F4 (0.20/0.25/0.55) and F5 (0.15/0.225/0.625) .Emulsions rheological properties were performed with a rotational Haake Rheostress 600 rheometer and a cone and plate geometry sensor (60-mm diameter, 2º cone angle), using a gap distance of 1mm. The emulsions showed pseudoplastic behaviour and were adequately described by the Power Law model. The rheological responses were influenced by the difference in green banana pulp proportions and also by the temperatures (10 and 25ºC). The formulations with high pulp content (F1 and F3) presented higher shear stress and apparent viscosity. Response surface methodology, described by the quadratic model,showed that the consistency coefficient (K) increased with the interaction between green banana pulp and soy oil concentration and the water fraction contributed to the flow behaviour index increase for all emulsions samples. Analysis of variance showed that the second-order model had not significant lack-of-fit and a significant F-value, indicating that quadratic model fitted well into the experimental data. The emulsions that presented better stability were the formulations F4 (0.20/0.25/0.55) and F5 (0.15/0.225/0.625).

scholarly journals Optimizing Physiochemical and Sensory Properties of Infrared-Hot Air Roasted Sunflower Kernels Using Response Surface Methodology

2018 ◽  
Vol 2018 ◽  
pp. 1-14 ◽  
Author(s):  
Mahdis Mosayebi ◽  
Mahdi Kashaninejad ◽  
Leila Najafian
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Color Change ◽  
Specific Energy Consumption ◽  
Chemical Properties ◽  
Sensory Properties ◽  
Quadratic Model ◽  
Total Phenolic ◽  
Phenolic Contents ◽  
Hot Air

Roasting sunflower kernels is a key process in production of nuts. In this study, the effect of roasting conditions, including hot air temperature (120–160°C), infrared (IR) power (400–600 W) and roasting time (3–10 min) on energy and specific energy consumption, color parameters (L∗, a∗, b∗, ΔE, BI, SI, WI, and h°), texture, moisture content, chemical properties (pH and total phenolic contents, peroxide value (PV), and sensory properties of sunflower kernel were investigated. In addition, the best models for the responses were obtained, and the proper roasting conditions were determined using response surface methodology (RSM). A quadratic model was proposed for color change (L∗, ΔE, SI, and WI), moisture and total phenol contents, linear relation for a∗, b∗, h°, and 2FI for BI, texture, PV, and pH. Roasting at 425.7 W IR power and 124.3°C for 3.7 min was found to be convenient or proper roasting conditions.

scholarly journals Effects of Ultrasonic-Microwave-Assisted Technology on Hordein Extraction from Barley and Optimization of Process Parameters Using Response Surface Methodology

2018 ◽  
Vol 2018 ◽  
pp. 1-8 ◽  
Author(s):  
Xiao Guan ◽  
Lv Li ◽  
Jing Liu ◽  
Sen Li
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Microwave Power ◽  
Process Intensification ◽  
Extraction Yield ◽  
Extraction Time ◽  
Quadratic Model ◽  
Ultrasonic Power ◽  
Microwave Assisted ◽  
The Difference

We investigated the process intensification of ultrasonic-microwave-assisted technology for hordein extraction from barley. Response surface methodology was utilized to optimize the extraction conditions and to analyze the interaction between four selected variables: temperature, microwave power, ultrasonic power, and extraction time. The validated extraction yield of hordein reached 8.84% at 78°C, microwave power 298 W, and ultrasonic power 690 W after 20 min as optimum conditions. Compared with traditional water-bath extraction (4.7%), the ultrasonic-microwave-assisted technology effectively increased the hordein extraction yield and shortened the extraction time. According to the obtained quadratic model (R2 = 0.9457), ultrasonic power and extraction time were the first two significant factors. However, temperature limited the effects of other factors during extraction. SDS-PAGE and scanning electron microscopy were used to identify the hordein extract and to clarify the difference between the two hordein fractions extracted with new and traditional methods, respectively. Ultrasonic-microwave-assisted technology provided a new way to improve hordein extraction yield from barley and could be a good candidate for industrial application of process intensification.

scholarly journals OPTIMIZATION OF REFLUX EXTRACTION FOR CAESALPINIA SAPPAN LINN. WOOD BY USING RESPONSE SURFACE METHODOLOGY

2020 ◽  
Vol 83 (1) ◽  
pp. 85-92
Author(s):  
Mohd Azahar Mohd Ariff ◽  
Muhammad Syafiq Abd Jalil ◽  
Noor ‘Aina Abdul Razak ◽  
Jefri Jaapar
Keyword(s):  
Particle Size ◽  
Response Surface Methodology ◽  
Drinking Water ◽  
Response Surface ◽  
Extraction Time ◽  
Percentage Error ◽  
Optimum Conditions ◽  
Caesalpinia Sappan ◽  
The Mean ◽  
Repeated Runs

Caesalpinia sappan linn. (CSL) is a plant which is also known as Sepang tree contains various medicinal values such as to treat diarrhea, skin rashes, syphilis, jaundice, drinking water for blood purifying, diabetes, and to improve skin complexion. The aim of this study is to obtain the most optimum condition in terms of the ratio of sample to solvent, particle size, and extraction time to get the highest amount of concentration of the CSL extract. In this study, the ranges of each parameters used were: ratio sample to solvent: 1.0:20, 1.5:20, 2.0:20, 2.5:20, 3.0:20, particle size: 1 mm, 500 um, 250 um, 125 um, 63 um, and extraction time: 1 hr, 2 hr, 3 hr, 4 hr, 5 hr. The concentration was analyzed using a UV-vis spectrophotometer. The optimum conditions were obtained by response surface methodology. From the design, 20 samples were run throughout this experiment. The optimized value from the RSM were 2.0:20 for ratio sample to solvent, 125 µm of particle size and 2.48 hours with the concentration of 37.1184 ppm. The accuracy of the predictive model was validated with 2 repeated runs and the mean percentage error was less than 3%. This confirmed the model’s capability for optimizing the conditions for the reflux extraction of CSL’s wood.

scholarly journals ADSORPTION OF MALACHITE GREEN DYE USING SPENT COFFEE GROUND BIOCHAR: OPTIMISATION USING RESPONSE SURFACE METHODOLOGY

2020 ◽  
Vol 83 (1) ◽  
pp. 27-36
Author(s):  
Mardawani Mohamad ◽  
Rizki Wannahari ◽  
Rosmawani Mohammad ◽  
Noor Fazliani Shoparwe ◽  
Kwan Wei Lun ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Adsorption Capacity ◽  
Response Surface ◽  
Malachite Green ◽  
Contact Time ◽  
Quadratic Model ◽  
Adsorbent Dosage ◽  
Coffee Grounds ◽  
Spent Coffee Ground ◽  
Coffee Ground

Used coffee grounds usually end up as landfill. However, the unique structural properties of its porous surface make coffee grounds can be transformed into biochar and performed as an alternative low cost adsorbent. Malachite green (MG) is a readily water soluble dye which is used extensively in textile and aquaculture industries. The mordant complex structures of MG generate destructive effects to animals and environment. In this study, adsorption of malachite green using spent coffee ground biochar as adsorbent was investigated. The experiments were designed in two methods: classical and optimisation by response surface methodology. Three parameters were studied, which are adsorbent dosage, contact time and pH while the responses in this study are malachite green removal (%) and adsorption capacity (mg/g). Optimisation studies were performed using response surface methodology. Quadratic model was chosen for both response and studied using central composite design. The correlation coefficient, R2 for the quadratic model of malachite green removal (%) and adsorption capacity (mg/g) were 0.95 and 0.99, respectively. The optimum malachite green removal (%) predicted was found at 99.27%, by using 0.12 g of adsorbent dosage, 43.05 minutes of contact time and pH of 9.45 at desirability of 1.0. The optimum adsorption capacity (mg/g) predicted was found at 118.01 mg/g, by using 0.02 g of adsorbent dosage, 60 minutes of contact time and pH of 10.24 at desirability of 0.98. So, it was concluded that the spent coffee ground biochar can be used as an effective adsorbent for malachite green removal from aqueous solution.

Sign in / Sign up

Export Citation Format

Share Document