scholarly journals COMPARATIVE STUDY ON SYNTHESIS OF METAL ORGANIC FRAMEWORK-199 BY MICROWAVE AND SOLVOLTHERMAL PROCESS

2017 ◽  
Vol 126 (1C) ◽  
pp. 107
Author(s):  
Tran Vinh Thien

<p>In the present paper, a comparative study on the synthesis of metal organic framework-199 by microwave and solvolthermal method was demonstrated.<strong> </strong>The obtained materials were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), nitrogen adsorption/desorption isotherms and thermal gravity (TG). The microwave synthesis of MOF-199 has been compared to its conventional hydrothermal synthesis. It is found that by using microwave synthesis MOF-199 can be obtained in a much shorter synthesis time with improved yield and textural properties. It is supposed that the microwave energy emitted fast and uniformly, creating nuclei through the solution which quickly grew to crystals and both the nucleation and crystallization steps were accelerated. These make the microwave synthesis advantages over solvolthermal synthesis.<strong></strong></p>

2020 ◽  
Vol 10 (13) ◽  
pp. 4563
Author(s):  
Cory Forsyth ◽  
Tyler Taras ◽  
Adam Johnson ◽  
Jessica Zagari ◽  
Crystal Collado ◽  
...  

This research explores the application of surfactants as green solvents for the rapid microwave synthesis of metal-organic framework (MOF) materials. Lead, copper, and iron metal-organic framework materials were synthesized using surfactant-thermal microwave synthesis. The MOF materials were characterized by powder X-ray diffraction, infrared spectroscopy, scanning electron microscopy, and thermogravimetric analysis. With the exception of the iron MOF, which was expected to be amorphous, the MOF materials are crystalline, though generally exhibiting smaller crystals than those achieved with traditional solvothermal synthesis. This green synthetic method reduced synthesis time and reduced the use of traditional organic solvents as the reaction media.


2017 ◽  
Vol 126 (1C) ◽  
pp. 21
Author(s):  
Võ Thị Thanh Châu ◽  
Hoàng Văn Đức

<p>In the present paper, a synthesis of MIL-101 by hydrothermal process was demonstrated. The obtained samples were characterized by powder X-ray diffraction (PXRD), transmission electron microscope (TEM), nitrogen adsorption/desorption isotherms at 77K, X-ray photoelectron spectroscopy (XPS). The results showed that MIL-101 synthesized by optimal conditions exhibited high crystallinity and surface area. The obtained MIL-101 possesses high stability in water and several organic solvents.</p><p><strong>Keywords:</strong> MIL-101, hydrothermal synthesis, metal organic framework-101. </p>


Author(s):  
Trang Thị Thu Nguyễn ◽  
Ý Thị Đặng ◽  
Linh Hồ Thùy Nguyễn ◽  
Hạnh Thị Kiều Tạ ◽  
Thắng Bách Phan ◽  
...  

Highly porous and biocompatible nano metal-organic framework materials (NMOF) are increasingly being applied in biomedical fields, especially as pharmaceutical adsorbent materials. Curcumin, found in turmeric, is a widely common herb in Eastern which has recently used in many applications in supporting cancer treatment. In the synthesis of MOF materials, the use of surfactants allows to control the morphology, the process of crystal formation and development and particle size of the material. In this research, MIL-100 (Fe) nanomaterials were successfully synthesized at room temperature in the presence of polyvinylpyrrolidone surfactant (PVP) to control the nanoparticle size about 50 nm in size. The synthesized MOF structure and properties were analyzed by using characterization techniques, including powder X-ray diffraction (PXRD), fourier-transform infrared (FT-IR), thermal gravimetric analyses (TGA) and nitrogen isothermal adsorption-desorption at 77 K. The characterization results showed that MIL-100 (Fe) nanomaterials have high crystallinity, large surface area, and highly thermal stability. However, its particle size is very small, only about 50 nm. Curcumin adsorption studies exhibited that this material had the ability to adsorb curcumin with an adsorption capacity up to 64.36 mg g-1. Kinetic and mechanism studies revealed that curcumin adsorption followed the pseudo-second model. In addition, thermodynamic studies proved that this was a spontaneous and exothermic adsorption process.


2020 ◽  
Vol 20 (5) ◽  
pp. 3019-3024 ◽  
Author(s):  
Juan P. Vizuet ◽  
Abigail L. Lewis ◽  
Gregory T. McCandless ◽  
Kenneth J. Balkus

There is growing interest in Holmium carriers for radiotherapeutic applications. In this work, a holmium-based metal-organic framework (MOF) using the 4,4′-biphenyldicarboxylic acid (H2BPDC) linker was synthesized and characterized to explore its potential as a radiotherapeutic carrier. The 3D MOF [Ho(BPDC)2]·(CH3)2NH2 was characterized by single crystal X-ray diffraction, FTIR, TGA and PXRD. A challenge to overcome in lanthanide-based MOFs is the deformation or collapse of the framework that can occur after evacuation of the pores. This structure displays high thermal stability and no collapse was observed when the molecules confined in the pores were removed. The coordination around the holmium center (CN = 8) is the key to this stability since only the organic linker and no solvent molecules coordinate to the metallic center. The porosity of the material was confirmed by high-pressure carbon dioxide (CO2) adsorption–desorption analysis. The stability of the MOF, its holmium content (28 wt%) and its porosity are features that make this material a potential holmium carrier for radiotherapeutic applications.


2008 ◽  
Vol 73 (1) ◽  
pp. 24-31
Author(s):  
Dayu Wu ◽  
Genhua Wu ◽  
Wei Huang ◽  
Zhuqing Wang

The compound [Cd(4,4'-bpy)2(H2O)2](ClO4)2·(L)2 was obtained by the reaction of Cd(ClO4)2, bis(1-pyrazinylethylidene)hydrazine (L) and 4,4'-bipyridine in aqueous MeOH. Single-crystal X-ray diffraction has revealed its two-dimensional metal-organic framework. The 2-D layers superpose on each other, giving a channel structure. The square planar grids consist of two pairs of shared edges with Cd(II) ion and a 4,4'-bipyridine molecule each vertex and side, respectively. The square cavity has a dimension of 11.817 × 11.781 Å. Two guest molecules of bis(1-pyrazinylethylidene)hydrazine are clathrated in every hydrophobic host cavity, being further stabilized by π-π stacking and hydrogen bonding. The results suggest that the hydrazine molecules present in the network serve as structure-directing templates in the formation of crystal structures.


Langmuir ◽  
2009 ◽  
Vol 25 (6) ◽  
pp. 3618-3626 ◽  
Author(s):  
Stuart R. Miller ◽  
Paul A. Wright ◽  
Thomas Devic ◽  
Christian Serre ◽  
Gérard Férey ◽  
...  

2015 ◽  
Vol 17 (26) ◽  
pp. 17471-17479 ◽  
Author(s):  
Volodymyr Bon ◽  
Nicole Klein ◽  
Irena Senkovska ◽  
Andreas Heerwig ◽  
Jürgen Getzschmann ◽  
...  

The “gate opening” mechanism in flexible MOF Ni2(2,6-ndc)2dabco was elucidated in detail.


2013 ◽  
Vol 275-277 ◽  
pp. 2367-2370
Author(s):  
Qing Yu Ma ◽  
Rui Fang Guan ◽  
Guo Zhong Li ◽  
Deng Xu Wang

A novel metal-organic framework, MnCl2(BIPS)2•2CH3OH•2H2O (1) were synthesized from MnCl2 and a tetrahedral silicon-cored ligand, Me2Si(p-C6H4-imdazol-1-yl)2 (BIPS) under the slow diffusion method. The structure was determined by single-crystal X-ray diffraction. Complex 1 is a 2D sheet structure constructed from 1D chains with 34-atom metallamacrocycles.


Sign in / Sign up

Export Citation Format

Share Document