scholarly journals Optimizing costs for vaccine control using the reorder point approach

2021 ◽  
Vol 7 (1) ◽  
pp. 72
Author(s):  
Lenny Margaretta Huizen ◽  
Titis Handayani ◽  
Saifur Rohman Cholil ◽  
Yanti Faradilah
Keyword(s):  
Information System ◽  
Calculation Result ◽  
Supply And Demand ◽  
Rotavirus Vaccine ◽  
Cost Difference ◽  
Reorder Point ◽  
Human Immunity ◽  
The Right ◽  
The Cost ◽  
Return Point

Vaccines are biological products that have an important role in human immunity. In Indonesia, some vaccines are categorized as compulsory vaccines and additional vaccines. The demand for additional vaccines is less predictable because they are not mandatory for use. This of course makes the amount of demand for vaccines less predictable. Also, the price of additional vaccines is not cheap when compared to the price of mandatory vaccines. So that the management of vaccines in the pharmacy warehouse is needed so that the amount of supply and demand is balanced so that the costs incurred will be more optimal. The information system regarding vaccine reordering is carried out using a reorder point so that the pharmacy warehouse can order according to the right need and at the right time.  The data used are demand data, prices, storage costs, and message costs. The results of calculations using reorder points within four months with a total purchase for the Rotavirus vaccine was 62 for IDR 28,274,948 and 70 for the hospital of IDR 31,801,500 with a difference of IDR 3,528,552. The calculation result using the reorder point for the Hexaxim vaccine with a total purchase for 4 months was 61 with a nominal value of IDR 58,380,060 while the calculation in the hospital was 67 with a nominal value of IDR 63,971,000 so that a nominal difference of IDR 5,590,940 was obtained.  Use of the return point can be used to alarm when and how many vaccines to order. This can be seen from the cost difference between the pharmacy warehouse and the calculation using the reorder point for the Hexaxim vaccine and the Rotavirus vaccine.

IMPLEMENTASI JOB ORDER COSTING METHOD DALAM PERHITUNGAN HARGA POKOK PRODUKSI MAP

2018 ◽  
Vol 4 (2) ◽  
pp. 43-55
Author(s):  
Ika Yulianti ◽  
Endah Masrunik ◽  
Anam Miftakhul Huda ◽  
Diana Elvianita
Keyword(s):  
Production Process ◽  
Quantitative Data ◽  
Production Cost ◽  
Qualitative Data ◽  
Cost Data ◽  
Method Calculation ◽  
Cost Of Production ◽  
The Right ◽  
The Cost

This study aims to find a comparison of the calculation of the cost of goods manufactured in the CV. Mitra Setia Blitar uses the company's method and uses the Job Order Costing (JOC) method. The method used in this study is quantitative. The types of data used are quantitative and qualitative. Quantitative data is in the form of map production cost data while qualitative data is in the form of information about map production process. The result of calculating the cost of production of the map between the two methods results in a difference of Rp. 306. Calculation using the company method is more expensive than using the Job Order Costing method. Calculation of cost of goods manufactured using the company method is Rp. 2,205,000, - or Rp. 2,205, - each unit. While using the Job Order Costing (JOC) method is Rp. 1,899,000, - or Rp 1,899, - each unit. So that the right method used in calculating the cost of production is the Job Order Costing (JOC) method

PERANCANGAN SISTEM INFORMASI MANAJEMEN KEUANGAN DI AMIK GARUT

2020 ◽  
Vol 2 (2) ◽  
pp. 128-143
Author(s):  
Tedi Budiman
Keyword(s):  
Information System ◽  
Information Systems ◽  
Financial Management ◽  
Financial Information ◽  
Financial Problems ◽  
Technological Advances ◽  
Design Program ◽  
Or Groups ◽  
The Cost ◽  
Financial Information Systems

Financial information system is an information system that provides information to individuals or groups of people, both inside and outside the company that contains financial problems and information about the flow of money for users in the company. Financial information systems are used to solve financial problems in a company, by meeting three financial principles: fast, safe, and inexpensive.Quick principle, the intention is that financial information systems must be able to provide the required data on time and can meet the needs. The Safe Principle means that the financial information system must be prepared with consideration of internal controls so that company assets are maintained. The Principle of Inexpensive, the intention is that the cost of implementing a financial information system must be reduced so that it is relatively inexpensive.Therefore we need technology media that can solve financial problems, and produce financial information to related parties quickly, safely and cheaply. One example of developing information technology today is computer technology and internet. Starting from financial problems and technological advances, the authors make a website-based financial management application to facilitate the parties that perform financial management and supervision.Method of development application program is used Waterfall method, with the following stages: Software Requirement Analysis, Software Design, Program Code Making, Testing, Support, Maintenance.

Protecting the Desperate: The Regulation of Payday Lending

2015 ◽  
Vol 43 (1) ◽  
pp. 147-176
Author(s):  
Andrew J Serpell
Keyword(s):  
Consumer Credit ◽  
Law Reform ◽  
Payday Lending ◽  
Short Term ◽  
Payday Loans ◽  
The Law ◽  
The Right ◽  
Credit Contracts ◽  
The Cost

Payday loans are small-amount, short-term, unsecured, high-cost credit contracts provided by non-mainstream credit providers. Payday loans are usually taken out to help the consumer pay for essential items, such as food, rent, electricity, petrol, broken-down appliances or car registration or repairs. These consumers take out payday loans because they cannot — or believe that they cannot — obtain a loan from a mainstream credit provider such as a bank. In recent years there has been a protracted debate in Australia — and in several overseas jurisdictions — about how to regulate the industry. Recent amendments to the National Consumer Credit Protection Act 2009 (Cth) — referred to in this article as the 2013 reforms — are designed to better protect payday loan consumers. While the 2013 reforms provide substantially improved protection for payday loan consumers, further changes to the law may be warranted. This article raises several law reform issues which should be considered as part of the 2015 review into small amount credit contracts, including whether the caps on the cost of credit are set at the right level, whether the required content and presentation of the consumer warnings needs to be altered, whether more needs to be done to protect consumers who are particularly disadvantaged or vulnerable and whether a general anti-avoidance provision should be included in the credit legislation.

Microcontroller Device for Conductor Identification Using Acoustic Signal

2020 ◽  
Vol 67 (1) ◽  
pp. 28-34
Author(s):  
Aleksandr V. Vinogradov ◽  
Aleksey V. Bukreev
Keyword(s):  
Acoustic Signal ◽  
Acoustic Waves ◽  
Theoretical Calculations ◽  
Poor Quality ◽  
Electrical Circuit ◽  
Research Purpose ◽  
Electrical Wiring ◽  
The Right ◽  
The Cost ◽  
Technical Solutions

When repairing and replacing electrical wiring in enterprises, the main difficulty is the lack or poor quality of documentation, plans for conductors laying. Distinguishing wires (cables) and their cores by the color of the shells or using tags attached to the ends is difficult if the shells have the same color and there are no tags. Devices and technical solutions used to identify wires and cables do not allow recognizing conductors without breaking the electrical circuit, removing insulation, and de-energizing the network. Searching for the right conductor is a time-consuming operation. (Research purpose) The research purpose is developing a new microcontroller device for identifying wires using an acoustic signal. (Materials and methods) Literature sources has been searched for devices for conductors identifying. (Results and discussion) The article proposes a method that involves feeding an acoustic signal to a wire at one point and capturing it at another, in order to recognize the desired wire. The article presents results of comparison of the developed microcontroller device for identifying conductors using an acoustic signal with known devices and methods for conductors recognizing. (Conclusions) The article reveals the shortcomings of existing methods and means of identifying wires and cables. Authors performed a theoretical calculation of the sound pressure in the conductor at a given distance. The article presents the calculation of speed of acoustic waves in conductors with different types of insulation. Authors designed a microcontroller device for identifying conductors using an acoustic signal and tested it. It was determined that the device increases the safety of work, reduces the cost of operating internal wiring and identification time; eliminates the violation of wire insulation, the need to disable electrical receivers. The convergence of theoretical calculations and experimental data was shown.

The impact of regulations on labor markets in the U.S.

2019 ◽  
Vol 1 (1) ◽  
pp. 36-40
Author(s):  
Souad Adnane
Keyword(s):  
Supply And Demand ◽  
Demand Model ◽  
Lead Teachers ◽  
Associate's Degree ◽  
Childcare Workers ◽  
Educational Requirements ◽  
The Cost ◽  
Women's Labor Force Participation ◽  
The Impact ◽  
The U.S

The District of Columbia (DC) Office of the Superintendent of Education (OSSE) issued in December 2016 new educational requirements for childcare workers, according to which, all childcare center directors in the District must earn a bachelor’s degree by December 2022 and all lead teachers an associate’s degree by December 2020 (Institute for Justice, 2018). Moreover, DC has one of the lowest staff-child ratios in the country. How are regulations pertaining to childcare workers’ qualifications and staff-child ratio affecting the childcare market in DC? The present paper is an attempt to answer this question first by analyzing the effects of more stringent regulations on the cost and availability of childcare in the U.S based on existing studies. It also uses the basic supply and demand model to examine the possible impact of the new DC policy on the cost, quality and supply of childcare in the District and how it will affect working parents, especially mothers. Next, the paper discusses the impact of deregulation based on simulations and regressions conducted by studies covering the U.S., and implications for quality. It concludes that more stringent childcare regulations, regarding educational requirements and staff-child ratios, are associated with a reduced number of childcare centers and a higher cost, and eventually affects women’s labor force participation.

scholarly journals An Optimal Control Problem by a Hybrid System of Hyperbolic and Ordinary Differential Equations

Games ◽  
2021 ◽  
Vol 12 (1) ◽  
pp. 23
Author(s):  
Alexander Arguchintsev ◽  
Vasilisa Poplevko
Keyword(s):  
Optimal Control ◽  
Differential Equations ◽  
Optimal Control Problem ◽  
Control Problem ◽  
Ordinary Differential Equations ◽  
Hyperbolic Equations ◽  
Control Methods ◽  
The Right ◽  
The Cost ◽  
Optimal Control Methods

This paper deals with an optimal control problem for a linear system of first-order hyperbolic equations with a function on the right-hand side determined from controlled bilinear ordinary differential equations. These ordinary differential equations are linear with respect to state functions with controlled coefficients. Such problems arise in the simulation of some processes of chemical technology and population dynamics. Normally, general optimal control methods are used for these problems because of bilinear ordinary differential equations. In this paper, the problem is reduced to an optimal control problem for a system of ordinary differential equations. The reduction is based on non-classic exact increment formulas for the cost-functional. This treatment allows to use a number of efficient optimal control methods for the problem. An example illustrates the approach.

scholarly journals Embracing Industry 4.0: Empirical Insights from Malaysia

Informatics ◽  
2021 ◽  
Vol 8 (2) ◽  
pp. 30
Author(s):  
Mansoor Ahmed Soomro ◽  
Mohd Hizam-Hanafiah ◽  
Nor Liza Abdullah ◽  
Mohd Helmi Ali ◽  
Muhammad Shahar Jusoh
Keyword(s):  
Industry 4.0 ◽  
New Technologies ◽  
Descriptive Study ◽  
Digital Transformation ◽  
Quantitative Approach ◽  
Survey Questionnaire ◽  
Digital Revolution ◽  
Leadership Strategy ◽  
The Right ◽  
The Cost

Industry 4.0 revolution, with its cutting-edge technologies, is an enabler for businesses, particularly in reducing the cost and improving the productivity. However, a large number of organizations are still too in their infancy to leverage the true potential of Industry 4.0 and its technologies. This paper takes a quantitative approach to reveal key insights from the companies that have implemented Industry 4.0 technologies. For this purpose, 238 technology companies in Malaysia were studied through a survey questionnaire. As technology companies are usually the first in line to adopt new technologies, they can be studied better as leaders in adopting the latest technologies. The findings of this descriptive study surfaced an array of insights in terms of Industry 4.0 readiness, Industry 4.0 technologies, leadership, strategy, and innovation. This research paper contributes by providing 10 key empirical insights on Industry 4.0 that can be utilized by managers to pace up their efforts towards digital transformation, and can help the policymakers in drafting the right policy to drive the digital revolution.

Network effect in shared supply chain platform value co-creation behavior in evolutionary game1

2021 ◽  
pp. 1-12
Author(s):  
Zou Xiaohong ◽  
Chen Jinlong ◽  
Gao Shuanping
Keyword(s):  
Boundary Condition ◽  
Supply Chain ◽  
Large Scale ◽  
Simulation Analysis ◽  
Supply And Demand ◽  
Evolutionary Game ◽  
Dynamic Game ◽  
Network Effect ◽  
Chain Model ◽  
The Cost

The shared supply chain model has provided new ideas for solving contradictions between supply and demand for large-scale standardized production by manufacturers and personalized demands of consumers. On the basis of a platform network effect perspective, this study constructs an evolutionary game model of value co-creation behavior for a shared supply chain platform and manufacturers, analyzes their evolutionary stable strategies, and uses numerical simulation analysis to further verify the model. The results revealed that the boundary condition for manufacturers to participate in value co-creation on a shared supply chain platform is that the net production cost of the manufacturers’ participation in the platform value co-creation must be less than that of nonparticipation. In addition, the boundary condition for the shared supply chain platform to actively participate in value co-creation is that the cost of the shared supply chain platform for active participation in value co-creation must be less than that of passive participation. Moreover, value co-creation behavior on the shared supply chain platform is a dynamic game interaction process between players with different benefit perceptions. Finally, the costs and benefits generated by the network effect can affect value co-creation on shared supply chain platforms.

Diplomacy Beyond History: Analytic-Violence, Producer-Centred Research, India

2021 ◽  
pp. 097492842098307
Author(s):  
Deep K. Datta-Ray
Keyword(s):  
New Method ◽  
The West ◽  
History Of ◽  
The Right ◽  
Nuclear Diplomacy ◽  
The Cost ◽  
Insight Into

The history of Indian diplomacy conceptualises diplomacy racially—as invented by the West—and restrictively—to offence. This is ‘analytic-violence’ and it explains the berating of Indians for mimicking diplomacy incorrectly or unthinkingly, and the deleting, dismissing, or denigrating, of diplomatic practices contradicting history’s conception. To relieve history from these offences, a new method is presented, ‘Producer-Centred Research’ (PCR). Initiating with abduction, an insight into a problem—in this case Indian diplomacy’s compromised historicisation—PCR solves it by converting history’s racist rationality into ‘rationalities’. The plurality renders rationality one of many, permitting PCR’s searching for rationalities not as a function of rationality but robust practices explicable in producer’s terms. Doing so is exegesis. It reveals India’s nuclear diplomacy as unique, for being organised by defence, not offence. Moreover, offence’s premise of security as exceeding opponent’s hostility renders it chimerical for such a security is, paradoxically, reliant on expanding arsenals. Additionally, doing so is a response to opponents. This fragments sovereignty and abdicates control for one is dependent on opponent’s choices. Defence, however, does not instigate opponents and so really delivers security by minimising arsenals since offence is eschewed. Doing so is not a response to opponents and so maintains sovereignty and retains control by denying others the right to offense. The cost of defence is courage, for instance, choosing to live in the shadow of nuclear annihilation. Exegesis discloses Balakot as a shift from defence to offence, so to relieve the Bharatiya Janata Party’s (BJP) leadership of having to be courageous. The intensity of the intention to discard courage is apparent in the price the BJP paid. This included equating India with Pakistan, permitting it to escalate the conflict, and so imperiling all humanity in a manner beyond history.

Sign in / Sign up

Export Citation Format

Share Document