scholarly journals Lanthanum based high surface area perovskite-type oxide and application in CO and propane combustion

2018 ◽  
Vol 34 (1) ◽  
pp. 31
Author(s):  
Paulo Roberto Nagipe Da Silva ◽  
Ana Brígida Soares
Keyword(s):  
Catalytic Activity ◽  
Photoelectron Spectroscopy ◽  
Perovskite Phase ◽  
High Surface ◽  
High Surface Area ◽  
Propane Combustion ◽  
Total Oxidation ◽  
X Ray ◽  
Co Precipitation ◽  
Perovskite Type

The perovskite-type oxides using transition metals present a promising potential as catalysts in total oxidation reaction. The present work investigates the effect of synthesis by oxidant co-precipitation on the catalytic activity of perovskite-type oxides LaBO3 (B= Co, Ni, Mn) in total oxidation of propane and CO. The perovskite-type oxides were characterized by means of X-ray diffraction, nitrogen adsorption (BET method), thermo gravimetric and differential thermal analysis (ATG-DTA) and X-ray photoelectron spectroscopy (XPS). Through a method involving the oxidant co-precipitation it’s possible to obtain catalysts with different BET surface areas, of 33-44 m2/g, according the salts of metal used. The characterization results proved that catalysts have a perovskite phase as well as lanthanum oxide, except LaMnO3, that presents a cationic vacancies and generation for known oxygen excess. The results of catalytic test showed that all oxides have a specific catalytic activity for total oxidation of CO and propane even though the temperatures for total conversion change for each transition metal and substance to be oxidized.

scholarly journals Eco-Friendly Cavity-Containing Iron Oxides Prepared by Mild Routes as Very Efficient Catalysts for the Total Oxidation of VOCs

Materials ◽  
2018 ◽  
Vol 11 (8) ◽  
pp. 1387 ◽  
Author(s):  
Rut Sanchis ◽  
Daniel Alonso-Domínguez ◽  
Ana Dejoz ◽  
María Pico ◽  
Inmaculada Álvarez-Serrano ◽  
...  
Keyword(s):  
Catalytic Activity ◽  
Surface Area ◽  
Iron Oxides ◽  
Photoelectron Spectroscopy ◽  
Specific Activity ◽  
High Surface ◽  
Superior Performance ◽  
Porous Iron ◽  
Total Oxidation ◽  
X Ray

Iron oxides (FeOx) are non-toxic, non-expensive and environmentally friendly compounds, which makes them good candidates for many industrial applications, among them catalysis. In the present article five catalysts based on FeOx were synthesized by mild routes: hydrothermal in subcritical and supercritical conditions (Fe-HT, Few200, Few450) and solvothermal (Fe-ST1 and Fe-ST2). The catalytic activity of these catalysts was studied for the total oxidation of toluene using very demanding conditions with high space velocities and including water and CO2 in the feed. The samples were characterized by X-ray diffraction (XRD), scanning and high-resolution transmission electron microscopy (SEM and HRTEM), X-ray photoelectron spectroscopy (XPS) and nitrogen adsorption-desorption isotherms. It was observed that the most active catalyst was a cavity-containing porous sample prepared by a solvothermal method with a relatively high surface area (55 m2 g−1) and constituted by flower-like aggregates with open cavities at the catalyst surface. This catalyst displayed superior performance (100% of toluene conversion at 325 °C using highly demanding conditions) and this performance can be maintained for several catalytic cycles. Interestingly, the porous iron oxides present not only a higher catalytic activity than the non-porous but also a higher specific activity per surface area. The high activity of this catalyst has been related to the possible synergistic effect of compositional, structural and microstructural features emphasizing the role of the surface area, the crystalline phase present, and the properties of the surface.

scholarly journals Non-Thermal Plasma-Modified Ru-Sn-Ti Catalyst for Chlorinated Volatile Organic Compound Degradation

Catalysts ◽  
2020 ◽  
Vol 10 (12) ◽  
pp. 1456
Author(s):  
Yujie Fu ◽  
You Zhang ◽  
Qi Xin ◽  
Zhong Zheng ◽  
Yu Zhang ◽  
...  
Keyword(s):  
Plasma Treatment ◽  
Photoelectron Spectroscopy ◽  
High Surface ◽  
High Surface Area ◽  
Surface Oxidation ◽  
Treatment Method ◽  
X Ray ◽  
Chlorinated Volatile Organic Compounds ◽  
Volatile Organic ◽  
Doped Titania

Chlorinated volatile organic compounds (CVOCs) are vital environmental concerns due to their low biodegradability and long-term persistence. Catalytic combustion technology is one of the more commonly used technologies for the treatment of CVOCs. Catalysts with high low-temperature activity, superior selectivity of non-toxic products, and resistance to chlorine poisoning are desirable. Here we adopted a plasma treatment method to synthesize a tin-doped titania loaded with ruthenium dioxide (RuO2) catalyst, possessing enhanced activity (T90%, the temperature at which 90% of dichloromethane (DCM) is decomposed, is 262 °C) compared to the catalyst prepared by the conventional calcination method. As revealed by transmission electron microscopy, X-ray diffraction, N2 adsorption, X-ray photoelectron spectroscopy, and hydrogen temperature-programmed reduction, the high surface area of the tin-doped titania catalyst and the enhanced dispersion and surface oxidation of RuO2 induced by plasma treatment were found to be the main factors determining excellent catalytic activities.

scholarly journals Enhanced Photocatalytic Activity of Titania by Co-Doping with Mo and W

Catalysts ◽  
2018 ◽  
Vol 8 (12) ◽  
pp. 631 ◽  
Author(s):  
Osmín Avilés-García ◽  
Jaime Espino-Valencia ◽  
Rubí Romero-Romero ◽  
José Rico-Cerda ◽  
Manuel Arroyo-Albiter ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance Spectroscopy ◽  
High Surface ◽  
High Surface Area ◽  
Absorption Capacity ◽  
Radiation Absorption ◽  
Experimental Conditions ◽  
X Ray ◽  
Assembly Method ◽  
Co Doped

Various W and Mo co-doped titanium dioxide (TiO2) materials were obtained through the EISA (Evaporation-Induced Self-Assembly) method and then tested as photocatalysts in the degradation of 4-chlorophenol. The synthesized materials were characterized by thermogravimetric analysis (TGA), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), Raman spectroscopy (RS), N2 physisorption, UV-vis diffuse reflectance spectroscopy (DRS), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM). The results showed that the W-Mo-TiO2 catalysts have a high surface area of about 191 m2/g, and the presence of an anatase crystalline phase. The co-doped materials exhibited smaller crystallite sizes than those with one dopant, since the crystallinity is inhibited by the presence of both species. In addition, tungsten and molybdenum dopants are distributed and are incorporated into the anatase structure of TiO2, due to changes in red parameters and lattice expansion. Under our experimental conditions, the co-doped TiO2 catalyst presented 46% more 4-chlorophenol degradation than Degussa P25. The incorporation of two dopant cations in titania improved its photocatalytic performance, which was attributed to a cooperative effect by decreasing the recombination of photogenerated charges, high radiation absorption capacity, high surface areas, and low crystallinity. When TiO2 is co-doped with the same amount of both cations (1 wt.%), the highest degradation and mineralization (97% and 74%, respectively) is achieved. Quinones were the main intermediates in the 4-chlorophenol oxidation by W-Mo-TiO2 and 1,2,4-benzenetriol was incompletely degraded.

Hydrothermal Synthesis and Characterization of Phosphor Doped Tetragonal Zirconia Nanocrystallites

2011 ◽  
Vol 197-198 ◽  
pp. 846-852
Author(s):  
Jian Jun Yin ◽  
Tao Wang ◽  
Wei Jing Xing
Keyword(s):  
Photoelectron Spectroscopy ◽  
Raw Materials ◽  
High Surface ◽  
High Surface Area ◽  
Tetragonal Zirconia ◽  
Zirconium Oxychloride ◽  
Dihydrogen Phosphate ◽  
Hydrothermal Conditions ◽  
Hydrothermal Temperature ◽  
X Ray

Using zirconium oxychloride hydrate ( ZrOCl2•8H2O) and ammonia water (NH3•H2O) as raw materials, and ammonium dihydrogen phosphate (NH4H2PO4) as additives, tetragonal zirconia (t-ZrO2) with size range of 8–12 nm were prepared by coprecipitation method under hydrothermal conditions. The influence factors on phase transformation and the particle size such as phosphor loading, hydrothermal temperature and calcination temperature were studied by X-ray diffraction (XRD), Fourier transform Roman spectra (FT-Roman), the Brunauer-Emmett-Teller (BET) method and X-ray photoelectron spectroscopy (XPS) techniques etc. Research results show that a small amount of phosphor has been incorporated into the framework of ZrO2 crystals, producing a certain amount of oxygen vacancies. Phosphor can effectively restrain crystal particles growth and improve the thermal stability of metastable t-ZrO2. The phosphor doped t-ZrO2 had a high surface area (244.2 m2/g). In contrast to the pure ZrO2 particles readily aggregating, the phosphor species deposited on the framework of ZrO2 crystals prevented the agglomeration of the primary particles during calcinations.

Synthesis and capacitive properties of carbonaceous sphere@MnO2 rattle-type hollow structures

2010 ◽  
Vol 25 (8) ◽  
pp. 1476-1484 ◽  
Author(s):  
Jintao Zhang ◽  
Jizhen Ma ◽  
Jianwen Jiang ◽  
X.S. Zhao
Keyword(s):  
Electron Microscope ◽  
Photoelectron Spectroscopy ◽  
High Surface ◽  
Hollow Spheres ◽  
High Surface Area ◽  
Mesoporous Structure ◽  
Experimental Conditions ◽  
X Ray ◽  
Hollow Structures ◽  
Capacitive Properties

Carbonaceous sphere@MnO2 rattle-type hollow spheres were synthesized under mild experimental conditions. The as-prepared hollow structures were characterized using scanning electron microscope, transmission electron microscope, x-ray diffraction, x-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, Raman spectroscopy, thermogravimetric analysis, and nitrogen adsorption techniques. The characterization data showed the formation of rattle-type hollow structures with a mesoporous MnO2 shell and a carbonaceous sphere core. The composition and shell thickness of the hollow spheres can be controlled experimentally. The capacitive performance of the hollow structures was evaluated by using both cycle voltammetry and charge–discharge methods. The results demonstrated a specific capacitance as high as 184 F/g at a current density of 125 mA/g. The good electrocapacitive performance resulted from the mesoporous structure and high surface area of the MnO2-based hollow spheres.

scholarly journals Effect of Y Modified Ceria Support in Mono and Bimetallic Pd–Au Catalysts for Complete Benzene Oxidation

Catalysts ◽  
2018 ◽  
Vol 8 (7) ◽  
pp. 283 ◽  
Author(s):  
Lyuba Ilieva ◽  
Anna Venezia ◽  
Petya Petrova ◽  
Giuseppe Pantaleo ◽  
Leonarda Liotta ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Catalytic Performance ◽  
Precipitation Method ◽  
Benzene Oxidation ◽  
Total Oxidation ◽  
Pd Catalysts ◽  
X Ray ◽  
Close Relationship ◽  
Ceria Support ◽  
Co Precipitation

Mono metallic and bimetallic Pd (1 wt. %)–Au (3 wt. %) catalysts were prepared using two ceria supports doped with 1 wt. % Y2O3. Yttrium was added by impregnation or co-precipitation. The catalyst synthesis was carried out by deposition–precipitation method, with sequential deposition–precipitation of palladium over previously loaded gold in the case of the bimetallic samples. The obtained materials, characterized by X-ray powder diffraction (XRD), High resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), and temperature programmed reduction (TPR) techniques, were tested in the complete benzene oxidation (CBO). The results of the characterization analyses and the catalytic performance pointed to a close relationship between structural, redox, and catalytic properties of mono and bimetallic catalysts. Among the monometallic systems, Pd catalysts were more active as compared to the corresponding Au catalysts. The bimetallic systems exhibited the best combustion activity. In particular, over Pd–Au supported on Y-impregnated ceria, 100% of benzene conversion towards total oxidation at the temperature of 150 °C was obtained. Comparison of surface sensitive XPS results of fresh and spent catalysts ascertained the redox character of the reaction.

scholarly journals Mesoporous CdO/Al2O3 nanocomposite with enhanced optoelectronic properties for visible-light photocatalysis and bactericidal applications

2021 ◽  
Author(s):  
Janani B ◽  
Asad Syed ◽  
Abdallah M. Elgorban ◽  
Ali H. Bahkali ◽  
S. Sudheer Khan
Keyword(s):  
Photoelectron Spectroscopy ◽  
Organic Contaminants ◽  
Dye Degradation ◽  
High Surface ◽  
High Surface Area ◽  
Energy Shift ◽  
Band Gap Energy ◽  
Oh Radicals ◽  
X Ray ◽  
Viable Solution

Abstract Pristine Al2O3 and CdO are known to possess poor photocatalytic activity individually. The formation of CdO/Al2O3 heterojunction was investigated for the enhancement of photocatalytic performance. High resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) has been used to determine the crystalline feature and elemental composition of the NCs respectively. Peaks ascribed to Cd-O and O-Al-O was noted in fourier-transform infrared spectroscopy (FTIR) analysis. The NCs exhibits a high surface area (27.23 m2/g) to their contributing particles which was analysed using BET analyser. The band gap energy of CdO/Al2O3NCs was observed to be 2.95 eV which shows a considerable energy shift from its individual particles, CdO (2.73 eV) and Al2O3 (3.94 eV). The results displayed that the degradation efficiency of the CdO-Al2O3 NCs was enhanced 14 times than pristine Al2O3 and 3.5 times than pristine CdO. The MB dye has showed the half life period of 80 min. TOC analysis of degraded product supported high mineralization of the pollutants. The dye degradation was driven by OH. radicals and the CdO-Al2O3 nanocomposite possessed high reusability which was confirmed by six cycle test. Growth inhibition of E. coli, P. aeruginosa and B. subtilis was attained by exposure to CdO/Al2O3 NCs. The CdO-Al2O3 NCs can be a viable solution for degradation of organic contaminants effectively under natural sun light as well as an efficient antibacterial agent.

Ni-doped, urchin-like Bi2S3 particles for electrocatalytic oxidation of glucose

2021 ◽  
pp. 2150006
Author(s):  
Biao Wang ◽  
Ya Liu ◽  
Xu Huai ◽  
Yuqing Miao
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Electrocatalytic Oxidation ◽  
High Surface ◽  
High Surface Area ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Capacitance Current ◽  
Oxidation Of Glucose

In order to develop non-noble metal-based electrocatalysts for glucose oxidation, the Ni-doped, urchin-like Bi2S3 particles were prepared by a solvothermal method using the solvent of ethylene glycol/H2O. The obtained products were characterized by scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy and X-ray diffraction. The background signal from capacitance current is relatively low and the electrocatalytic oxidation current of glucose relatively high due to the urchin-like nanostructure of Bi2S3 particles and high surface area where the presence of Bi also improves the electrocatalytic performance of NiII/NiIII shift.

scholarly journals Synthesis and Introducing Au-Cu Alloy Nanoparticles/Porous Silicon as a Novel Modifier of Screen Printed Carbon Electrode in Simultaneous Electrocatalytic Detection of Codeine and Acetaminophen

2022 ◽  
Author(s):  
Farzad Allahnouri ◽  
Khalil Farhadi ◽  
Hamideh Imanzadeh ◽  
Rahim Molaei ◽  
Habibollah Eskandari
Keyword(s):  
Porous Silicon ◽  
Photoelectron Spectroscopy ◽  
High Surface ◽  
High Surface Area ◽  
Galvanic Replacement ◽  
Human Blood Plasma ◽  
Carbon Electrode ◽  
X Ray ◽  
Screen Printed Carbon Electrode ◽  
Screen Printed

Abstract In the present study, a bimetallic nanostructure of gold-copper (Au-CuNPs) was decorated on the surface of porous silicon (PSi) using an easy galvanic replacement reaction between metal ions and PSi in the presence of 0.1 M hydrofluoric acid solution. The morphology and structures of the Au-CuNPs@PSi nanocomposite were characterized using X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FE-SEM), fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD) energy-dispersive X-ray spectroscopy (EDX) and cyclic voltammetry (CV) techniques. Then, prepared nanocomposite was used as a modifier in screen-printed carbon electrode (SPCE) for the highly sensitive simultaneous determination of codeine (COD) and acetaminophen (ACE). The combination of PSi and metals nanoparticles provide a porous and high surface area with excellent electrical conductivity which leads to reduce the peak potentials and enhance the oxidation peak currents of COD and ACE at the surface of the Au-CuNPs@PSi/SPCE nanosensor. The dynamic linear ranges were obtained from 0.06 to 0.6 µM for both COD and ACE and the detection limits (3.0 S/N) estimated 0.35 µM for COD and 0.30 µM for ACE, respectively. Moreover, recovery tests were carried out in real samples such as urine, human blood plasma, and tablets.

Sign in / Sign up

Export Citation Format

Share Document