scholarly journals The usage of lignin in two significant applications: As adsorbent surface of water pollutants and antioxidant of plastic polymers: short review

2021 ◽  
Vol 8 (3) ◽  
pp. 108-118
Author(s):  
Zeyad Fadhil ◽  
Dheaa Shamikh Zageer ◽  
Abbas Hasan Faris ◽  
Mohammed H Al-Mashhadani
Keyword(s):  
High Surface ◽  
High Surface Area ◽  
Short Review ◽  
Free Radical Scavenger ◽  
Radical Scavenger ◽  
Huge Amount ◽  
Photo Degradation ◽  
Adsorption Phenomenon ◽  
Chemical Structures ◽  
Adsorbent Surface

Since pollution is very serious problem threating the environmental eco-system around the world, but people do not usually treat this issue properly. Water is contaminated with different type of pollutants such as organic, inorganic, heavy metals, pesticides, dyes, phenols, and many other pollutants. Using adsorption phenomenon is very practical, easy and common method to remove pollutants from water. Owing to the significant properties of lignin such as high surface area, porosity, availability in huge amount, it was chosen to be used as an adsorbent surface of various pollutants. Herein it is going to review some of important literatures regarding that. Another serious problem that is threatening the marine eco-system, human health, and influence the global warming is the huge consumption of plastic polymers every year. Thus, reducing the consumption of plastic polymers is significantly matter. Lignin chemical structures are highly oxygenated and have several aromatic units, so by definition lignin can act as an antioxidant, free radical scavenger and photo-stabilizers. As the chemical structure of monomer moieties to form lignin are highly aromatic so it is suitable to work as UV- blocker to stop the photo-degradation of plastic.

scholarly journals Bifunctional Materials for CO₂ Adsorption: Short Review

2021 ◽  
Vol 7 (2) ◽  
pp. 15-19
Author(s):  
S. M. Yusof ◽  
L. P. Teh
Keyword(s):  
Surface Area ◽  
Active Sites ◽  
Co2 Adsorption ◽  
High Surface ◽  
Co Adsorption ◽  
High Surface Area ◽  
Short Review ◽  
High Dispersion ◽  
High Porosity ◽  
Adsorption Performance

In recent years, there has been growing interest in adsorbents with high surface area, high porosity, high stability and high selectivity for CO2 adsorption. By the incorporation of the additive on the supports such as zeolite, silica, and carbon, the physicochemical properties of the adsorbent and CO2 adsorption performance can be enhanced. In this review, we focus on the overview of bifunctional materials (BFMs) for CO2 adsorption. The findings of this study suggests that the high surface area and high porosity of the support provide a good medium for high dispersion and accessibility of additives (amine or metal oxide), enhancing the CO2 adsorption efficiency. The excessive additive however may lead to a decrease of CO2 adsorption performance due to pore blockage and the decrease of active sites for CO2 interactions. The synergistic relationship of the supporting material and additive is significant towards the enhancement of CO2 adsorption.

Synthesis and Characterization of ZnO Micro-Tubes

2013 ◽  
Vol 678 ◽  
pp. 217-222
Author(s):  
Kugalur Shanmugam Ranjith ◽  
B.S. Kruthika ◽  
Ramasamy Thangavelu Rajendrakumar
Keyword(s):  
High Surface ◽  
High Surface Area ◽  
Tube Formation ◽  
Etching Time ◽  
X Ray Diffraction ◽  
Defect States ◽  
Photo Degradation ◽  
Growth Method ◽  
Koh Etching

ZnO microtubes were synthesized by two step process, (i) synthesis of ZnO microrods and (ii) etching the microrods to form microtubes. The ZnO microrods are synthesized by the simple solution growth method using the zinc chloride and hexamine as a precursors at around 95 °C. Using the KOH as the etchant the ZnO microrods have etched into ZnO microtubes. ZnO micro-tube formation was studied as a function of KOH concentration and etching time. At low KOH concentration the tubes were not completely etched whereas at higher concentration the tube walls were damaged. ZnO tubes were characterized by X-ray diffraction, scanning electron microscopy, UV-vis spectrophotometer and room temperature photoluminescence (PL) measurement. From the UV absorption spectra and PL spectra reveals the presence (Oxygen vacancies related) of defect states due to KOH etching. The as-synthesized Zinc Oxide micro tubes have a diameter of ~600 nm, wall thickness of 30–40 nm, and length of ~7 μm. ZnO microtubes were tested as the catalyst for the photo degradation of the methylene blue (MB) dye. The result shows the photo degradation efficiency of the tubes are twice faster compared to that of rods, this is due to high surface area associated with the tubes.

In Situ microscopy of the anodic etching of silicon

1995 ◽  
Vol 53 ◽  
pp. 232-233
Author(s):  
Frances M. Ross ◽  
Peter C. Searson
Keyword(s):  
Composite Structures ◽  
High Surface ◽  
High Surface Area ◽  
Chemical Properties ◽  
Selective Etching ◽  
Silicon On Insulator ◽  
Second Phase ◽  
Porous Layers ◽  
New Class ◽  
Porous Semiconductors

Porous semiconductors represent a relatively new class of materials formed by the selective etching of a single or polycrystalline substrate. Although porous silicon has received considerable attention due to its novel optical properties1, porous layers can be formed in other semiconductors such as GaAs and GaP. These materials are characterised by very high surface area and by electrical, optical and chemical properties that may differ considerably from bulk. The properties depend on the pore morphology, which can be controlled by adjusting the processing conditions and the dopant concentration. A number of novel structures can be fabricated using selective etching. For example, self-supporting membranes can be made by growing pores through a wafer, films with modulated pore structure can be fabricated by varying the applied potential during growth, composite structures can be prepared by depositing a second phase into the pores and silicon-on-insulator structures can be formed by oxidising a buried porous layer. In all these applications the ability to grow nanostructures controllably is critical.

Electron holography of catalysts

1995 ◽  
Vol 53 ◽  
pp. 416-417
Author(s):  
A. K. Datye ◽  
D. S. Kalakkad ◽  
L. F. Allard ◽  
E. Völkl
Keyword(s):  
Heterogeneous Catalysts ◽  
High Surface ◽  
High Surface Area ◽  
Atomic Scale ◽  
Nano Particles ◽  
Phase Image ◽  
Electron Holography ◽  
Specimen Thickness ◽  
Phase Information ◽  
Particle Structure

The active phase in heterogeneous catalysts consists of nanometer-sized metal or oxide particles dispersed within the tortuous pore structure of a high surface area matrix. Such catalysts are extensively used for controlling emissions from automobile exhausts or in industrial processes such as the refining of crude oil to produce gasoline. The morphology of these nano-particles is of great interest to catalytic chemists since it affects the activity and selectivity for a class of reactions known as structure-sensitive reactions. In this paper, we describe some of the challenges in the study of heterogeneous catalysts, and provide examples of how electron holography can help in extracting details of particle structure and morphology on an atomic scale.Conventional high-resolution TEM imaging methods permit the image intensity to be recorded, but the phase information in the complex image wave is lost. However, it is the phase information which is sensitive at the atomic scale to changes in specimen thickness and composition, and thus analysis of the phase image can yield important information on morphological details at the nanometer level.

Structure and composition of metal particles in Pt-Sn/Al2O3 bimetallic catalysts

1990 ◽  
Vol 48 (4) ◽  
pp. 278-279
Author(s):  
A. Sachdev ◽  
J. Schwank
Keyword(s):  
Bimetallic Catalysts ◽  
Bimetallic Catalyst ◽  
Size Structure ◽  
High Surface ◽  
High Surface Area ◽  
Metal Particles ◽  
Alloy Formation ◽  
Particle Size Range ◽  
Oxide Supports ◽  
Petroleum Fractions

Platinum - tin bimetallic catalysts have been primarily utilized in the chemical industry in the catalytic reforming of petroleum fractions. In this process the naphtha feedstock is converted to hydrocarbons with higher octane numbers and high anti-knock qualities. Most of these catalysts contain small metal particles or crystallites supported on high surface area insulating oxide supports. The determination of the structure and composition of these particles is crucial to the understanding of the catalytic behavior. In a bimetallic catalyst it is important to know how the two metals are distributed within the particle size range and in what way the addition of a second metal affects the size, structure and composition of the metal particles. An added complication in the Pt-Sn system is the possibility of alloy formation between the two elements for all atomic ratios.

Melatonin reduces high levels of lipid peroxidation induced by potassium iodate in porcine thyroid

2019 ◽  
pp. 1-7 ◽  
Author(s):  
Paulina Iwan ◽  
Jan Stepniak ◽  
Malgorzata Karbownik-Lewinska
Keyword(s):  
Lipid Peroxidation ◽  
Oxidative Damage ◽  
Membrane Lipids ◽  
Chemical Properties ◽  
Iodine Concentration ◽  
Free Radical Scavenger ◽  
Radical Scavenger ◽  
Protective Effects ◽  
Potassium Iodate ◽  
Hormone Synthesis

Abstract. Iodine is essential for thyroid hormone synthesis. Under normal iodine supply, calculated physiological iodine concentration in the thyroid is approx. 9 mM. Either potassium iodide (KI) or potassium iodate (KIO3) are used in iodine prophylaxis. KI is confirmed as absolutely safe. KIO3 possesses chemical properties suggesting its potential toxicity. Melatonin (N-acetyl-5-methoxytryptamine) is an effective antioxidant and free radical scavenger. Study aims: to evaluate potential protective effects of melatonin against oxidative damage to membrane lipids (lipid peroxidation, LPO) induced by KI or KIO3 in porcine thyroid. Homogenates of twenty four (24) thyroids were incubated in presence of either KI or KIO3 without/with melatonin (5 mM). As melatonin was not effective against KI-induced LPO, in the next step only KIO3 was used. Homogenates were incubated in presence of KIO3 (200; 100; 50; 25; 20; 15; 10; 7.5; 5.0; 2.5; 1.25 mM) without/with melatonin or 17ß-estradiol. Five experiments were performed with different concentrations of melatonin (5.0; 2.5; 1.25; 1.0; 0.625 mM) and one with 17ß-estradiol (1.0 mM). Malondialdehyde + 4-hydroxyalkenals (MDA + 4-HDA) concentration (LPO index) was measured spectrophotometrically. KIO3 increased LPO with the strongest damaging effect (MDA + 4-HDA level: ≈1.28 nmol/mg protein, p < 0.05) revealed at concentrations of around 15 mM, thus corresponding to physiological iodine concentrations in the thyroid. Melatonin reduced LPO (MDA + 4-HDA levels: from ≈0.97 to ≈0,76 and from ≈0,64 to ≈0,49 nmol/mg protein, p < 0.05) induced by KIO3 at concentrations of 10 mM or 7.5 mM. Conclusion: Melatonin can reduce very strong oxidative damage to membrane lipids caused by KIO3 used in doses resulting in physiological iodine concentrations in the thyroid.

OPTIMASI KONDISI EKSTRAKSI SENYAWA AKTIF ANTIOKSIDAN DARI BIJI ANGGUR

2019 ◽  
Vol 3 (2) ◽  
pp. 35
Author(s):  
Kartini Kartini ◽  
Azminah Azminah
Keyword(s):  
Free Radical ◽  
Optimum Condition ◽  
Active Compound ◽  
Grape Seed ◽  
Free Radical Scavenger ◽  
Water Bath ◽  
Radical Scavenger ◽  
Optimum Conditions ◽  
Ethanolic Solution ◽  
Reduced Pressure

In order to prepare standardized extract, optimization of extraction conditions of grape seed has been done. These conditions are type of menstrum (50, 70 and 96% of ethanolic solution), length of extraction (1, 2 and 4 hours) also method of evaporation (reduced pressure and opened air). Activity on free radical scavenger used as parameters to determine optimum conditions. Based on EC50 (concentration which scavenge 50% amount of free radical) can be concluded that optimum condition for extracting antioxidant active compound from grape seed are 70% ethanolic solution as menstrum, length of extraction 1 hour and evaporation on opened air use water bath.

Intercalation of First Row Transition Metals inside Covalent-Organic Frameworks (COF): a Strategy to Fine Tune the Electronic Properties of Porous Crystalline Materials

2018 ◽  
Author(s):  
Srimanta Pakhira ◽  
Jose Mendoza-Cortes
Keyword(s):  
Transition Metal ◽  
Transition Metals ◽  
Electronic Properties ◽  
High Surface ◽  
Electronic Devices ◽  
High Surface Area ◽  
Main Role ◽  
Covalent Organic Frameworks ◽  
Porous Network ◽  
Crystalline Materials

<div>Covalent organic frameworks (COFs) have emerged as an important class of nano-porous crystalline materials with many potential applications. They are intriguing platforms for the design of porous skeletons with special functionality at the molecular level. However, despite their extraordinary properties, it is difficult to control their electronic properties, thus hindering the potential implementation in electronic devices. A new form of nanoporous material, COFs intercalated with first row transition metal is proposed to address this fundamental drawback - the lack of electronic tunability. Using first-principles calculations, we have designed 31 new COF materials <i>in-silico</i> by intercalating all of the first row transition metals (TMs) with boroxine-linked and triazine-linked COFs: COF-TM-x (where TM=Sc-Zn and x=3-5). This is a significant addition considering that only 187 experimentally COFs structures has been reported and characterized so far. We have investigated their structure and electronic properties. Specifically, we predict that COF's band gap and density of states (DOSs) can be controlled by intercalating first row transition metal atoms (TM: Sc - Zn) and fine tuned by the concentration of TMs. We also found that the $d$-subshell electron density of the TMs plays the main role in determining the electronic properties of the COFs. Thus intercalated-COFs provide a new strategy to control the electronic properties of materials within a porous network. This work opens up new avenues for the design of TM-intercalated materials with promising future applications in nanoporous electronic devices, where a high surface area coupled with fine-tuned electronic properties are desired.</div>

Tenacious Mass Transfer Limitations Drive Catalytic Selectivity during Electrochemical Carbon Dioxide Reduction

2019 ◽  
Author(s):  
Kailun Yang ◽  
Recep Kas ◽  
Wilson A. Smith
Keyword(s):  
Surface Area ◽  
High Surface ◽  
High Surface Area ◽  
Catalyst Layer ◽  
Active Surface ◽  
Active Surface Area ◽  
High Concentration ◽  
Copper Electrodes ◽  
Surface Enhanced ◽  
Local Current

<p>This study evaluated the performance of the commonly used strong buffer electrolytes, i.e. phosphate buffers, during CO<sub>2</sub> electroreduction in neutral pH conditions by using in-situ surface enhanced infrared absorption spectroscopy (SEIRAS). Unfortunately, the buffers break down a lot faster than anticipated which has serious implications on many studies in the literature such as selectivity and kinetic analysis of the electrocatalysts. Increasing electrolyte concentration, surprisingly, did not extend the potential window of the phosphate buffers due to dramatic increase in hydrogen evolution reaction. Even high concentration phosphate buffers (1 M) break down within the potentials (-1 V vs RHE) where hydrocarbons are formed on copper electrodes. We have extended the discussion to high surface area electrodes by evaluating electrodes composed of copper nanowires. We would like highlight that it is not possible to cope with high local current densities on these high surface area electrodes by using high buffer capacity solutions and the CO<sub>2</sub> electrocatalysts are needed to be evaluated by casting thin nanoparticle films onto inert substrates as commonly employed in fuel cell reactions and up to now scarcely employed in CO<sub>2</sub> electroreduction. In addition, we underscore that normalization of the electrocatalytic activity to the electrochemical active surface area is not the ultimate solution due to concentration gradient along the catalyst layer.This will “underestimate” the activity of high surface electrocatalyst and the degree of underestimation will depend on the thickness, porosity and morphology of the catalyst layer. </p> <p> </p>

Sign in / Sign up

Export Citation Format

Share Document